! Started logfile: J1613+3412_X_2006_02_14_yyk_uvs.log on Wed Jul 5 12:56:11 2006 obs J1613+3412_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1613+3412_X_2006_02_14_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.769502 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 20084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1613+3412_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.35122 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7214 mas, bmaj=2.061 mas, bpa=18.01 degrees ! Estimated noise=2.57678 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.7849 Jy ! Component: 100 - total flux cleaned = 3.43388 Jy ! Total flux subtracted in 100 components = 3.43388 Jy ! Clean residual min=-0.182325 max=0.274724 Jy/beam ! Clean residual mean=0.000198 rms=0.047030 Jy/beam ! Combined flux in latest and established models = 3.43388 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.43388 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.607605Jy sigma=9.587648 ! Fit after self-cal, rms=0.604712Jy sigma=9.534746 ! Inverting map and beam ! Estimated beam: bmin=0.7214 mas, bmaj=2.061 mas, bpa=18.01 degrees ! Estimated noise=2.57678 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8623 mas, bmaj=2.129 mas, bpa=16.2 degrees ! Estimated noise=1.87937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.331691 Jy ! Component: 100 - total flux cleaned = 0.478934 Jy ! Component: 150 - total flux cleaned = 0.56318 Jy ! Component: 200 - total flux cleaned = 0.617329 Jy ! Total flux subtracted in 200 components = 0.617329 Jy ! Clean residual min=-0.164874 max=0.261770 Jy/beam ! Clean residual mean=-0.000140 rms=0.050062 Jy/beam ! Combined flux in latest and established models = 4.05121 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 25 components and 4.05121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474522Jy sigma=7.396706 ! Fit after self-cal, rms=0.467186Jy sigma=7.282356 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8623 x 2.129 at 16.2 degrees (North through East) ! Clean map min=-0.14257 max=3.2224 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.987202 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.07 KP 0.95 ! LA 0.96 MK 1.02 NL 1.02 OV 1.09 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00976 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.03 HN 1.06 KP 0.89 ! LA 0.92 MK 0.98 NL 0.99 OV 1.08 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00773 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 0.95 KP 0.82 ! LA 0.94 MK 1.03 NL 0.98 OV 1.09 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.994134 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.09 HN 0.99 KP 0.86 ! LA 0.93 MK 1.04 NL 0.99 OV 1.14 ! PT 1.00* SC 1.02 ! ! ! Fit before self-cal, rms=0.467186Jy sigma=7.282356 ! Fit after self-cal, rms=0.350964Jy sigma=5.455835 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350964Jy sigma=5.455835 ! Fit after self-cal, rms=0.351348Jy sigma=5.450749 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8737 mas, bmaj=2.138 mas, bpa=16.26 degrees ! Estimated noise=1.86503 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.213353 Jy ! Component: 100 - total flux cleaned = 0.289861 Jy ! Component: 150 - total flux cleaned = 0.323728 Jy ! Component: 200 - total flux cleaned = 0.345357 Jy ! Total flux subtracted in 200 components = 0.345357 Jy ! Clean residual min=-0.062328 max=0.072676 Jy/beam ! Clean residual mean=-0.000068 rms=0.018613 Jy/beam ! Combined flux in latest and established models = 4.39657 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 56 components and 4.39657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236112Jy sigma=3.509454 ! Fit after self-cal, rms=0.225158Jy sigma=3.277811 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225158Jy sigma=3.277811 ! Fit after self-cal, rms=0.199780Jy sigma=2.983615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.041721 Jy ! Component: 100 - total flux cleaned = 0.0550087 Jy ! Component: 150 - total flux cleaned = 0.0616363 Jy ! Component: 200 - total flux cleaned = 0.0680936 Jy ! Total flux subtracted in 200 components = 0.0680936 Jy ! Clean residual min=-0.049063 max=0.056444 Jy/beam ! Clean residual mean=-0.000056 rms=0.014319 Jy/beam ! Combined flux in latest and established models = 4.46466 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 4.46466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178623Jy sigma=2.633235 ! Fit after self-cal, rms=0.171979Jy sigma=2.556582 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8737 x 2.138 at 16.26 degrees (North through East) ! Clean map min=-0.048496 max=3.2098 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171979Jy sigma=2.556582 ! Fit after self-cal, rms=0.148427Jy sigma=2.099233 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148427Jy sigma=2.099233 ! Fit after self-cal, rms=0.147895Jy sigma=2.093976 ! Inverting map and beam ! Estimated beam: bmin=0.8759 mas, bmaj=2.151 mas, bpa=16.4 degrees ! Estimated noise=1.86501 mJy/beam. ! Added new window around map position (2.6, -3.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637628 Jy ! Component: 100 - total flux cleaned = 0.0719943 Jy ! Component: 150 - total flux cleaned = 0.0664654 Jy ! Component: 200 - total flux cleaned = 0.0618181 Jy ! Total flux subtracted in 200 components = 0.0618181 Jy ! Clean residual min=-0.030898 max=0.033796 Jy/beam ! Clean residual mean=-0.000130 rms=0.009080 Jy/beam ! Combined flux in latest and established models = 4.52648 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 4.52648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123178Jy sigma=1.613755 ! Fit after self-cal, rms=0.121491Jy sigma=1.580042 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121491Jy sigma=1.580042 ! Fit after self-cal, rms=0.118655Jy sigma=1.536530 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118655Jy sigma=1.536530 ! Fit after self-cal, rms=0.118656Jy sigma=1.536327 ! Inverting map and beam ! Estimated beam: bmin=0.8759 mas, bmaj=2.155 mas, bpa=16.46 degrees ! Estimated noise=1.86598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0241733 Jy ! Component: 100 - total flux cleaned = 0.0245004 Jy ! Component: 150 - total flux cleaned = 0.021159 Jy ! Component: 200 - total flux cleaned = 0.0171125 Jy ! Total flux subtracted in 200 components = 0.0171125 Jy ! Clean residual min=-0.026413 max=0.024864 Jy/beam ! Clean residual mean=-0.000099 rms=0.007129 Jy/beam ! Combined flux in latest and established models = 4.54359 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 128 components and 4.54359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110249Jy sigma=1.375823 ! Fit after self-cal, rms=0.109559Jy sigma=1.362509 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.933 mas, bmaj=2.664 mas, bpa=6.986 degrees ! Estimated noise=2.43683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114944 Jy ! Component: 100 - total flux cleaned = -0.00459796 Jy ! Component: 150 - total flux cleaned = -0.00736026 Jy ! Component: 200 - total flux cleaned = -0.00923019 Jy ! Total flux subtracted in 200 components = -0.00923019 Jy ! Clean residual min=-0.037053 max=0.031655 Jy/beam ! Clean residual mean=-0.000223 rms=0.010944 Jy/beam ! Combined flux in latest and established models = 4.53436 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 151 components and 4.53436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108920Jy sigma=1.336438 ! Fit after self-cal, rms=0.108220Jy sigma=1.322305 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7248 mas, bmaj=2.071 mas, bpa=18.08 degrees ! Estimated noise=2.55325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.76076 Jy ! Component: 100 - total flux cleaned = 3.4142 Jy ! Component: 150 - total flux cleaned = 3.70644 Jy ! Component: 200 - total flux cleaned = 3.88165 Jy ! Total flux subtracted in 200 components = 3.88165 Jy ! Clean residual min=-0.062187 max=0.085810 Jy/beam ! Clean residual mean=0.000067 rms=0.022098 Jy/beam ! Combined flux in latest and established models = 3.88165 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 3.88165 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8759 mas, bmaj=2.155 mas, bpa=16.46 degrees ! Estimated noise=1.86598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.187344 Jy ! Component: 100 - total flux cleaned = 0.315382 Jy ! Component: 150 - total flux cleaned = 0.40891 Jy ! Component: 200 - total flux cleaned = 0.475024 Jy ! Total flux subtracted in 200 components = 0.475024 Jy ! Clean residual min=-0.045243 max=0.047880 Jy/beam ! Clean residual mean=-0.000021 rms=0.014774 Jy/beam ! Combined flux in latest and established models = 4.35667 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 70 components and 4.35668 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.933 mas, bmaj=2.664 mas, bpa=6.986 degrees ! Estimated noise=2.43683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0955586 Jy ! Component: 100 - total flux cleaned = 0.129545 Jy ! Component: 150 - total flux cleaned = 0.149592 Jy ! Component: 200 - total flux cleaned = 0.164563 Jy ! Total flux subtracted in 200 components = 0.164563 Jy ! Clean residual min=-0.050806 max=0.032463 Jy/beam ! Clean residual mean=-0.000236 rms=0.013484 Jy/beam ! Combined flux in latest and established models = 4.52124 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 122 components and 4.52124 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8759 mas, bmaj=2.155 mas, bpa=16.46 degrees ! Estimated noise=1.86598 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0208047 Jy ! Component: 100 - total flux cleaned = 0.0308107 Jy ! Component: 150 - total flux cleaned = 0.0362135 Jy ! Component: 200 - total flux cleaned = 0.0385067 Jy ! Total flux subtracted in 200 components = 0.0385067 Jy ! Clean residual min=-0.033998 max=0.026487 Jy/beam ! Clean residual mean=-0.000096 rms=0.007483 Jy/beam ! Combined flux in latest and established models = 4.55974 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 4.55974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114630Jy sigma=1.456544 ! Fit after self-cal, rms=0.112857Jy sigma=1.424017 wmodel J1613+3412_X_2006_02_14_yyk\_map.mod ! Writing 140 model components to file: J1613+3412_X_2006_02_14_yyk_map.mod wobs J1613+3412_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1613+3412_X_2006_02_14_yyk_uvs.fits wwins J1613+3412_X_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J1613+3412_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0131124 Jy ! Component: 100 - total flux cleaned = -0.0118791 Jy ! Component: 150 - total flux cleaned = -0.0103241 Jy ! Component: 200 - total flux cleaned = -0.00895993 Jy ! Component: 250 - total flux cleaned = -0.00736751 Jy ! Component: 300 - total flux cleaned = -0.00766621 Jy ! Component: 350 - total flux cleaned = -0.00767574 Jy ! Component: 400 - total flux cleaned = -0.00741487 Jy ! Component: 450 - total flux cleaned = -0.00791969 Jy ! Component: 500 - total flux cleaned = -0.00888666 Jy ! Component: 550 - total flux cleaned = -0.00980024 Jy ! Component: 600 - total flux cleaned = -0.0104534 Jy ! Component: 650 - total flux cleaned = -0.010868 Jy ! Component: 700 - total flux cleaned = -0.0112673 Jy ! Component: 750 - total flux cleaned = -0.0114558 Jy ! Component: 800 - total flux cleaned = -0.0114556 Jy ! Component: 850 - total flux cleaned = -0.0119846 Jy ! Component: 900 - total flux cleaned = -0.0119876 Jy ! Component: 950 - total flux cleaned = -0.012157 Jy ! Component: 1000 - total flux cleaned = -0.0120045 Jy ! Component: 1050 - total flux cleaned = -0.0120009 Jy ! Component: 1100 - total flux cleaned = -0.0119939 Jy ! Component: 1150 - total flux cleaned = -0.0118499 Jy ! Component: 1200 - total flux cleaned = -0.0118484 Jy ! Component: 1250 - total flux cleaned = -0.0119859 Jy ! Component: 1300 - total flux cleaned = -0.0127487 Jy ! Component: 1350 - total flux cleaned = -0.0129915 Jy ! Component: 1400 - total flux cleaned = -0.0129924 Jy ! Component: 1450 - total flux cleaned = -0.0136868 Jy ! Component: 1500 - total flux cleaned = -0.0137961 Jy ! Component: 1550 - total flux cleaned = -0.0142336 Jy ! Component: 1600 - total flux cleaned = -0.0148753 Jy ! Component: 1650 - total flux cleaned = -0.0151855 Jy ! Component: 1700 - total flux cleaned = -0.0151869 Jy ! Component: 1750 - total flux cleaned = -0.0154818 Jy ! Component: 1800 - total flux cleaned = -0.0154866 Jy ! Component: 1850 - total flux cleaned = -0.0157689 Jy ! Component: 1900 - total flux cleaned = -0.0158611 Jy ! Component: 1950 - total flux cleaned = -0.0163037 Jy ! Component: 2000 - total flux cleaned = -0.0165618 Jy ! Total flux subtracted in 2048 components = -0.0166459 Jy ! Clean residual min=-0.004579 max=0.004927 Jy/beam ! Clean residual mean=-0.000015 rms=0.001638 Jy/beam ! Combined flux in latest and established models = 4.5431 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 286 components and 4.5431 Jy ![Exited script file: muppet] wmap "J1613+3412_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8759 x 2.155 at 16.46 degrees (North through East) ! Clean map min=-0.023641 max=3.2138 Jy/beam ! Writing clean map to FITS file: J1613+3412_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.21377 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00162746 device "J1613+3412_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.151921 0.151921 0.303842 0.607684 1.21537 2.43074 4.86147 9.72295 19.4459 38.8918 77.7836 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.213 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8759 x 2.155 at 16.46 degrees (North through East) ! Clean map min=-0.023641 max=3.2138 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1613+3412_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1613+3412_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:56:44 2006