! Started logfile: J1613+3412_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:55:42 2006 obs J1613+3412_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1613+3412_S_2006_02_23_yyk_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.981718 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2426 lines of history. ! ! Reading 24916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1613+3412_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.7066 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=7.644 mas, bpa=22.42 degrees ! Estimated noise=1.94756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.96121 Jy ! Component: 100 - total flux cleaned = 3.80548 Jy ! Total flux subtracted in 100 components = 3.80548 Jy ! Clean residual min=-0.160921 max=0.260559 Jy/beam ! Clean residual mean=-0.001564 rms=0.053686 Jy/beam ! Combined flux in latest and established models = 3.80548 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 3.80548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.802041Jy sigma=14.778450 ! Fit after self-cal, rms=0.789537Jy sigma=14.579099 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=8.1 mas, bpa=20.63 degrees ! Estimated noise=1.56813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.453857 Jy ! Component: 100 - total flux cleaned = 0.705736 Jy ! Component: 150 - total flux cleaned = 0.863007 Jy ! Component: 200 - total flux cleaned = 0.964552 Jy ! Total flux subtracted in 200 components = 0.964552 Jy ! Clean residual min=-0.099611 max=0.115542 Jy/beam ! Clean residual mean=-0.001350 rms=0.028365 Jy/beam ! Combined flux in latest and established models = 4.77003 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 61 model components to the UV plane model. ! The established model now contains 77 components and 4.77003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.510871Jy sigma=9.821381 ! Fit after self-cal, rms=0.509877Jy sigma=9.806909 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.44 x 8.1 at 20.63 degrees (North through East) ! Clean map min=-0.096372 max=3.3047 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02166 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.92 HN 0.98 KP 0.94 ! LA 1.19 MK 0.94 NL 0.92 OV 0.94 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00518 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.97 HN 1.00 KP 0.96 ! LA 1.16 MK 1.03 NL 0.94 OV 0.98 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.95747 ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.98 HN 1.02 KP 0.96 ! LA 0.92 MK 1.15 NL 1.03 OV 1.00 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04451 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.96 KP 0.89 ! LA 0.79 MK 1.15 NL 0.97 OV 0.87 ! PT 0.94 SC 1.07 ! ! ! Fit before self-cal, rms=0.509877Jy sigma=9.806909 ! Fit after self-cal, rms=0.254017Jy sigma=5.012558 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254017Jy sigma=5.012558 ! Fit after self-cal, rms=0.254035Jy sigma=5.012348 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=8.282 mas, bpa=20.68 degrees ! Estimated noise=1.57029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.010582 Jy ! Component: 100 - total flux cleaned = 0.0106913 Jy ! Component: 150 - total flux cleaned = 0.0107521 Jy ! Component: 200 - total flux cleaned = 0.0102628 Jy ! Total flux subtracted in 200 components = 0.0102628 Jy ! Clean residual min=-0.029218 max=0.022949 Jy/beam ! Clean residual mean=0.000025 rms=0.007167 Jy/beam ! Combined flux in latest and established models = 4.78029 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 4.78029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244842Jy sigma=4.885135 ! Fit after self-cal, rms=0.244096Jy sigma=4.876707 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244096Jy sigma=4.876707 ! Fit after self-cal, rms=0.242607Jy sigma=4.845402 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130084 Jy ! Component: 100 - total flux cleaned = -0.000307353 Jy ! Component: 150 - total flux cleaned = 4.46852e-05 Jy ! Component: 200 - total flux cleaned = 1.55661e-05 Jy ! Total flux subtracted in 200 components = 1.55661e-05 Jy ! Clean residual min=-0.025880 max=0.023066 Jy/beam ! Clean residual mean=0.000019 rms=0.006843 Jy/beam ! Combined flux in latest and established models = 4.78031 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 4.78031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240685Jy sigma=4.824126 ! Fit after self-cal, rms=0.240073Jy sigma=4.816139 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.499 x 8.282 at 20.68 degrees (North through East) ! Clean map min=-0.023886 max=3.3475 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240073Jy sigma=4.816139 ! Fit after self-cal, rms=0.074974Jy sigma=1.414764 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074974Jy sigma=1.414764 ! Fit after self-cal, rms=0.074946Jy sigma=1.414299 ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.32 mas, bpa=20.58 degrees ! Estimated noise=1.56791 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0156679 Jy ! Component: 100 - total flux cleaned = -0.0198581 Jy ! Component: 150 - total flux cleaned = -0.0217854 Jy ! Component: 200 - total flux cleaned = -0.0232714 Jy ! Total flux subtracted in 200 components = -0.0232714 Jy ! Clean residual min=-0.019152 max=0.014903 Jy/beam ! Clean residual mean=0.000058 rms=0.004501 Jy/beam ! Combined flux in latest and established models = 4.75704 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 104 components and 4.75704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070013Jy sigma=1.298650 ! Fit after self-cal, rms=0.068883Jy sigma=1.283643 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068883Jy sigma=1.283643 ! Fit after self-cal, rms=0.066654Jy sigma=1.242111 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066654Jy sigma=1.242111 ! Fit after self-cal, rms=0.066651Jy sigma=1.242107 ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.338 mas, bpa=20.5 degrees ! Estimated noise=1.56783 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117041 Jy ! Component: 100 - total flux cleaned = -0.0134983 Jy ! Component: 150 - total flux cleaned = -0.0148496 Jy ! Component: 200 - total flux cleaned = -0.0159464 Jy ! Total flux subtracted in 200 components = -0.0159464 Jy ! Clean residual min=-0.015118 max=0.012764 Jy/beam ! Clean residual mean=0.000048 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 4.74109 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 115 components and 4.74109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064081Jy sigma=1.177928 ! Fit after self-cal, rms=0.063298Jy sigma=1.167605 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.439 mas, bmaj=9.985 mas, bpa=12.59 degrees ! Estimated noise=1.94036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00378438 Jy ! Component: 100 - total flux cleaned = -0.00454104 Jy ! Component: 150 - total flux cleaned = -0.0046809 Jy ! Component: 200 - total flux cleaned = -0.00492665 Jy ! Total flux subtracted in 200 components = -0.00492665 Jy ! Clean residual min=-0.015642 max=0.013609 Jy/beam ! Clean residual mean=0.000090 rms=0.004444 Jy/beam ! Combined flux in latest and established models = 4.73616 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 4.73616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063545Jy sigma=1.162755 ! Fit after self-cal, rms=0.063322Jy sigma=1.159725 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.814 mas, bmaj=7.734 mas, bpa=22.28 degrees ! Estimated noise=1.93059 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.93444 Jy ! Component: 100 - total flux cleaned = 3.76762 Jy ! Component: 150 - total flux cleaned = 4.12277 Jy ! Component: 200 - total flux cleaned = 4.32582 Jy ! Total flux subtracted in 200 components = 4.32582 Jy ! Clean residual min=-0.041335 max=0.079845 Jy/beam ! Clean residual mean=-0.000065 rms=0.017680 Jy/beam ! Combined flux in latest and established models = 4.32582 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 51 model components to the UV plane model. ! The established model now contains 51 components and 4.32582 Jy ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.338 mas, bpa=20.5 degrees ! Estimated noise=1.56783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16317 Jy ! Component: 100 - total flux cleaned = 0.256381 Jy ! Component: 150 - total flux cleaned = 0.313132 Jy ! Component: 200 - total flux cleaned = 0.348521 Jy ! Total flux subtracted in 200 components = 0.348521 Jy ! Clean residual min=-0.015558 max=0.021231 Jy/beam ! Clean residual mean=-0.000059 rms=0.005126 Jy/beam ! Combined flux in latest and established models = 4.67434 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 106 components and 4.67434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.439 mas, bmaj=9.985 mas, bpa=12.59 degrees ! Estimated noise=1.94036 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330415 Jy ! Component: 100 - total flux cleaned = 0.0475906 Jy ! Component: 150 - total flux cleaned = 0.0545732 Jy ! Component: 200 - total flux cleaned = 0.0568869 Jy ! Total flux subtracted in 200 components = 0.0568869 Jy ! Clean residual min=-0.014807 max=0.013852 Jy/beam ! Clean residual mean=0.000072 rms=0.004506 Jy/beam ! Combined flux in latest and established models = 4.73123 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 129 components and 4.73123 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.493 mas, bmaj=8.338 mas, bpa=20.5 degrees ! Estimated noise=1.56783 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000523447 Jy ! Component: 100 - total flux cleaned = 0.000318343 Jy ! Component: 150 - total flux cleaned = 0.000747104 Jy ! Component: 200 - total flux cleaned = 0.00150104 Jy ! Total flux subtracted in 200 components = 0.00150104 Jy ! Clean residual min=-0.013896 max=0.015210 Jy/beam ! Clean residual mean=0.000027 rms=0.003799 Jy/beam ! Combined flux in latest and established models = 4.73273 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 137 components and 4.73273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065421Jy sigma=1.198081 ! Fit after self-cal, rms=0.064092Jy sigma=1.180926 wmodel J1613+3412_S_2006_02_23_yyk\_map.mod ! Writing 137 model components to file: J1613+3412_S_2006_02_23_yyk_map.mod wobs J1613+3412_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1613+3412_S_2006_02_23_yyk_uvs.fits wwins J1613+3412_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J1613+3412_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447953 Jy ! Component: 100 - total flux cleaned = 0.00496103 Jy ! Component: 150 - total flux cleaned = 0.00474514 Jy ! Component: 200 - total flux cleaned = 0.00550571 Jy ! Component: 250 - total flux cleaned = 0.00585709 Jy ! Component: 300 - total flux cleaned = 0.00618889 Jy ! Component: 350 - total flux cleaned = 0.00666818 Jy ! Component: 400 - total flux cleaned = 0.00757662 Jy ! Component: 450 - total flux cleaned = 0.00829099 Jy ! Component: 500 - total flux cleaned = 0.00925716 Jy ! Component: 550 - total flux cleaned = 0.0100491 Jy ! Component: 600 - total flux cleaned = 0.0110655 Jy ! Component: 650 - total flux cleaned = 0.0120438 Jy ! Component: 700 - total flux cleaned = 0.0131013 Jy ! Component: 750 - total flux cleaned = 0.0138908 Jy ! Component: 800 - total flux cleaned = 0.0146534 Jy ! Component: 850 - total flux cleaned = 0.015496 Jy ! Component: 900 - total flux cleaned = 0.016411 Jy ! Component: 950 - total flux cleaned = 0.0171944 Jy ! Component: 1000 - total flux cleaned = 0.0178598 Jy ! Component: 1050 - total flux cleaned = 0.0186884 Jy ! Component: 1100 - total flux cleaned = 0.0190413 Jy ! Component: 1150 - total flux cleaned = 0.019216 Jy ! Component: 1200 - total flux cleaned = 0.0197217 Jy ! Component: 1250 - total flux cleaned = 0.0200456 Jy ! Component: 1300 - total flux cleaned = 0.0202046 Jy ! Component: 1350 - total flux cleaned = 0.0204373 Jy ! Component: 1400 - total flux cleaned = 0.0205895 Jy ! Component: 1450 - total flux cleaned = 0.0208844 Jy ! Component: 1500 - total flux cleaned = 0.0211687 Jy ! Component: 1550 - total flux cleaned = 0.0211666 Jy ! Component: 1600 - total flux cleaned = 0.0213033 Jy ! Component: 1650 - total flux cleaned = 0.0217015 Jy ! Component: 1700 - total flux cleaned = 0.0217671 Jy ! Component: 1750 - total flux cleaned = 0.0220225 Jy ! Component: 1800 - total flux cleaned = 0.0221485 Jy ! Component: 1850 - total flux cleaned = 0.0224525 Jy ! Component: 1900 - total flux cleaned = 0.0224524 Jy ! Component: 1950 - total flux cleaned = 0.0224536 Jy ! Component: 2000 - total flux cleaned = 0.0226243 Jy ! Total flux subtracted in 2048 components = 0.0227355 Jy ! Clean residual min=-0.003361 max=0.003305 Jy/beam ! Clean residual mean=0.000020 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 4.75546 Jy keep ! Adding 127 model components to the UV plane model. ! The established model now contains 264 components and 4.75546 Jy ![Exited script file: muppet] wmap "J1613+3412_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 8.338 at 20.5 degrees (North through East) ! Clean map min=-0.0092602 max=3.3519 Jy/beam ! Writing clean map to FITS file: J1613+3412_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.35189 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010975 device "J1613+3412_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0982279 0.0982279 0.196456 0.392911 0.785823 1.57165 3.14329 6.28658 12.5732 25.1463 50.2927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.351 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.493 x 8.338 at 20.5 degrees (North through East) ! Clean map min=-0.0092602 max=3.3519 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1613+3412_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1613+3412_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:56:11 2006