! Started logfile: J1613+3412_S_2006_02_16_yyk_uvs.log on Wed Jul 5 12:55:13 2006 obs J1613+3412_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1613+3412_S_2006_02_16_yyk_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.947377 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 24556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1613+3412_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.78225 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.783 mas, bpa=18.66 degrees ! Estimated noise=2.12578 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.03828 Jy ! Component: 100 - total flux cleaned = 3.91107 Jy ! Total flux subtracted in 100 components = 3.91107 Jy ! Clean residual min=-0.159239 max=0.265315 Jy/beam ! Clean residual mean=-0.000906 rms=0.055882 Jy/beam ! Combined flux in latest and established models = 3.91107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 3.91107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.778601Jy sigma=12.957423 ! Fit after self-cal, rms=0.764771Jy sigma=12.747870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.356 mas, bmaj=8.234 mas, bpa=20.11 degrees ! Estimated noise=1.67211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.449629 Jy ! Component: 100 - total flux cleaned = 0.677604 Jy ! Component: 150 - total flux cleaned = 0.810394 Jy ! Component: 200 - total flux cleaned = 0.889112 Jy ! Total flux subtracted in 200 components = 0.889112 Jy ! Clean residual min=-0.072591 max=0.096677 Jy/beam ! Clean residual mean=-0.001425 rms=0.022478 Jy/beam ! Combined flux in latest and established models = 4.80018 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 68 components and 4.80018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495870Jy sigma=8.180276 ! Fit after self-cal, rms=0.494175Jy sigma=8.159648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.356 x 8.234 at 20.11 degrees (North through East) ! Clean map min=-0.070867 max=3.4231 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01096 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 0.98 KP 0.94 ! LA 1.21 MK 0.93 NL 0.92 OV 0.95 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992858 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.02 KP 0.97 ! LA 1.18 MK 1.01 NL 0.94 OV 0.98 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.970854 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 HN 1.03 KP 0.97 ! LA 0.94 MK 1.13 NL 1.04 OV 1.00 ! PT 1.07 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03919 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.97 KP 0.90 ! LA 0.78 MK 1.13 NL 0.97 OV 0.87 ! PT 0.94 SC 1.10 ! ! ! Fit before self-cal, rms=0.494175Jy sigma=8.159648 ! Fit after self-cal, rms=0.227065Jy sigma=3.999427 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227065Jy sigma=3.999427 ! Fit after self-cal, rms=0.227091Jy sigma=3.999116 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=8.323 mas, bpa=20.07 degrees ! Estimated noise=1.66938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301812 Jy ! Component: 100 - total flux cleaned = 0.0062702 Jy ! Component: 150 - total flux cleaned = 0.00802097 Jy ! Component: 200 - total flux cleaned = 0.00799835 Jy ! Total flux subtracted in 200 components = 0.00799835 Jy ! Clean residual min=-0.022171 max=0.015872 Jy/beam ! Clean residual mean=-0.000080 rms=0.005009 Jy/beam ! Combined flux in latest and established models = 4.80818 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 78 components and 4.80818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222414Jy sigma=3.930384 ! Fit after self-cal, rms=0.221128Jy sigma=3.920911 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.221128Jy sigma=3.920911 ! Fit after self-cal, rms=0.203149Jy sigma=3.628308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104425 Jy ! Component: 100 - total flux cleaned = 0.00203043 Jy ! Component: 150 - total flux cleaned = 0.00242817 Jy ! Component: 200 - total flux cleaned = 0.00308219 Jy ! Total flux subtracted in 200 components = 0.00308219 Jy ! Clean residual min=-0.018719 max=0.014495 Jy/beam ! Clean residual mean=-0.000075 rms=0.004409 Jy/beam ! Combined flux in latest and established models = 4.81126 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 84 components and 4.81126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201173Jy sigma=3.599772 ! Fit after self-cal, rms=0.199044Jy sigma=3.570990 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.436 x 8.323 at 20.07 degrees (North through East) ! Clean map min=-0.017934 max=3.4502 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199044Jy sigma=3.570990 ! Fit after self-cal, rms=0.074718Jy sigma=1.235763 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074718Jy sigma=1.235763 ! Fit after self-cal, rms=0.074517Jy sigma=1.231822 ! Inverting map and beam ! Estimated beam: bmin=3.449 mas, bmaj=8.323 mas, bpa=20.02 degrees ! Estimated noise=1.66948 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.004132 Jy ! Component: 100 - total flux cleaned = -0.00332667 Jy ! Component: 150 - total flux cleaned = -0.00295237 Jy ! Component: 200 - total flux cleaned = -0.00240046 Jy ! Total flux subtracted in 200 components = -0.00240046 Jy ! Clean residual min=-0.017980 max=0.014580 Jy/beam ! Clean residual mean=-0.000040 rms=0.003610 Jy/beam ! Combined flux in latest and established models = 4.80886 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 4.80886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070964Jy sigma=1.171202 ! Fit after self-cal, rms=0.069601Jy sigma=1.153995 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069601Jy sigma=1.153995 ! Fit after self-cal, rms=0.069191Jy sigma=1.144314 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069191Jy sigma=1.144314 ! Fit after self-cal, rms=0.069194Jy sigma=1.144306 ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.324 mas, bpa=19.98 degrees ! Estimated noise=1.6707 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0027199 Jy ! Component: 100 - total flux cleaned = -0.00174062 Jy ! Component: 150 - total flux cleaned = -0.00120606 Jy ! Component: 200 - total flux cleaned = -0.000744126 Jy ! Total flux subtracted in 200 components = -0.000744126 Jy ! Clean residual min=-0.015762 max=0.013777 Jy/beam ! Clean residual mean=-0.000033 rms=0.003217 Jy/beam ! Combined flux in latest and established models = 4.80812 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 4.80812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066774Jy sigma=1.103837 ! Fit after self-cal, rms=0.065943Jy sigma=1.093388 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.617 mas, bmaj=10 mas, bpa=15.85 degrees ! Estimated noise=2.07841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419903 Jy ! Component: 100 - total flux cleaned = 0.00563187 Jy ! Component: 150 - total flux cleaned = 0.00625803 Jy ! Component: 200 - total flux cleaned = 0.00665833 Jy ! Total flux subtracted in 200 components = 0.00665833 Jy ! Clean residual min=-0.010463 max=0.008978 Jy/beam ! Clean residual mean=-0.000043 rms=0.002697 Jy/beam ! Combined flux in latest and established models = 4.81478 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 4.81477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065742Jy sigma=1.083421 ! Fit after self-cal, rms=0.065357Jy sigma=1.078289 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=7.82 mas, bpa=18.47 degrees ! Estimated noise=2.12139 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.01769 Jy ! Component: 100 - total flux cleaned = 3.86301 Jy ! Component: 150 - total flux cleaned = 4.22072 Jy ! Component: 200 - total flux cleaned = 4.42479 Jy ! Total flux subtracted in 200 components = 4.42479 Jy ! Clean residual min=-0.049290 max=0.078599 Jy/beam ! Clean residual mean=-0.000164 rms=0.016897 Jy/beam ! Combined flux in latest and established models = 4.42479 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 4.42479 Jy ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.324 mas, bpa=19.98 degrees ! Estimated noise=1.6707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168193 Jy ! Component: 100 - total flux cleaned = 0.260929 Jy ! Component: 150 - total flux cleaned = 0.314785 Jy ! Component: 200 - total flux cleaned = 0.346582 Jy ! Total flux subtracted in 200 components = 0.346582 Jy ! Clean residual min=-0.014597 max=0.015752 Jy/beam ! Clean residual mean=-0.000066 rms=0.003769 Jy/beam ! Combined flux in latest and established models = 4.77137 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 88 components and 4.77137 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.617 mas, bmaj=10 mas, bpa=15.85 degrees ! Estimated noise=2.07841 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.026037 Jy ! Component: 100 - total flux cleaned = 0.0369357 Jy ! Component: 150 - total flux cleaned = 0.0418056 Jy ! Component: 200 - total flux cleaned = 0.0430801 Jy ! Total flux subtracted in 200 components = 0.0430801 Jy ! Clean residual min=-0.009110 max=0.006861 Jy/beam ! Clean residual mean=-0.000044 rms=0.002403 Jy/beam ! Combined flux in latest and established models = 4.81445 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 4.81445 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=8.324 mas, bpa=19.98 degrees ! Estimated noise=1.6707 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00281948 Jy ! Component: 100 - total flux cleaned = -0.00311616 Jy ! Component: 150 - total flux cleaned = -0.00313271 Jy ! Component: 200 - total flux cleaned = -0.00293908 Jy ! Total flux subtracted in 200 components = -0.00293908 Jy ! Clean residual min=-0.012856 max=0.009579 Jy/beam ! Clean residual mean=-0.000029 rms=0.002753 Jy/beam ! Combined flux in latest and established models = 4.81151 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 112 components and 4.81151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063876Jy sigma=1.053670 ! Fit after self-cal, rms=0.062694Jy sigma=1.039638 wmodel J1613+3412_S_2006_02_16_yyk\_map.mod ! Writing 112 model components to file: J1613+3412_S_2006_02_16_yyk_map.mod wobs J1613+3412_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1613+3412_S_2006_02_16_yyk_uvs.fits wwins J1613+3412_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J1613+3412_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00373863 Jy ! Component: 100 - total flux cleaned = -0.00408042 Jy ! Component: 150 - total flux cleaned = -0.0042323 Jy ! Component: 200 - total flux cleaned = -0.00438098 Jy ! Component: 250 - total flux cleaned = -0.00424956 Jy ! Component: 300 - total flux cleaned = -0.00437767 Jy ! Component: 350 - total flux cleaned = -0.00437764 Jy ! Component: 400 - total flux cleaned = -0.00461276 Jy ! Component: 450 - total flux cleaned = -0.00495204 Jy ! Component: 500 - total flux cleaned = -0.00495021 Jy ! Component: 550 - total flux cleaned = -0.0048424 Jy ! Component: 600 - total flux cleaned = -0.00453324 Jy ! Component: 650 - total flux cleaned = -0.00433452 Jy ! Component: 700 - total flux cleaned = -0.00442929 Jy ! Component: 750 - total flux cleaned = -0.00395852 Jy ! Component: 800 - total flux cleaned = -0.00396018 Jy ! Component: 850 - total flux cleaned = -0.00386993 Jy ! Component: 900 - total flux cleaned = -0.00378466 Jy ! Component: 950 - total flux cleaned = -0.00361762 Jy ! Component: 1000 - total flux cleaned = -0.00370083 Jy ! Component: 1050 - total flux cleaned = -0.00362235 Jy ! Component: 1100 - total flux cleaned = -0.00362259 Jy ! Component: 1150 - total flux cleaned = -0.00354464 Jy ! Component: 1200 - total flux cleaned = -0.00339306 Jy ! Component: 1250 - total flux cleaned = -0.00346563 Jy ! Component: 1300 - total flux cleaned = -0.00339213 Jy ! Component: 1350 - total flux cleaned = -0.00324972 Jy ! Component: 1400 - total flux cleaned = -0.00324996 Jy ! Component: 1450 - total flux cleaned = -0.00318103 Jy ! Component: 1500 - total flux cleaned = -0.00318104 Jy ! Component: 1550 - total flux cleaned = -0.00311533 Jy ! Component: 1600 - total flux cleaned = -0.0031799 Jy ! Component: 1650 - total flux cleaned = -0.00317999 Jy ! Component: 1700 - total flux cleaned = -0.00305547 Jy ! Component: 1750 - total flux cleaned = -0.00293274 Jy ! Component: 1800 - total flux cleaned = -0.00281254 Jy ! Component: 1850 - total flux cleaned = -0.00275328 Jy ! Component: 1900 - total flux cleaned = -0.0028116 Jy ! Component: 1950 - total flux cleaned = -0.0027539 Jy ! Component: 2000 - total flux cleaned = -0.00286692 Jy ! Total flux subtracted in 2048 components = -0.00270028 Jy ! Clean residual min=-0.002964 max=0.003033 Jy/beam ! Clean residual mean=-0.000005 rms=0.001099 Jy/beam ! Combined flux in latest and established models = 4.80881 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 238 components and 4.80881 Jy ![Exited script file: muppet] wmap "J1613+3412_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 8.324 at 19.98 degrees (North through East) ! Clean map min=-0.0060932 max=3.4625 Jy/beam ! Writing clean map to FITS file: J1613+3412_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.46247 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108507 device "J1613+3412_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0940141 0.0940141 0.188028 0.376056 0.752113 1.50423 3.00845 6.0169 12.0338 24.0676 48.1352 96.2705 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.462 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.456 x 8.324 at 19.98 degrees (North through East) ! Clean map min=-0.0060932 max=3.4625 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1613+3412_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1613+3412_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:55:41 2006