! Started logfile: J1613+3412_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:54:38 2006 obs J1613+3412_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1613+3412_S_2006_02_14_yyk_uva.fits ! AN table 1: 145 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.769502 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 20084 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1613+3412_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.77307 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=7.443 mas, bpa=16.44 degrees ! Estimated noise=2.51075 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.01139 Jy ! Component: 100 - total flux cleaned = 3.88758 Jy ! Total flux subtracted in 100 components = 3.88758 Jy ! Clean residual min=-0.169038 max=0.272992 Jy/beam ! Clean residual mean=0.000494 rms=0.062721 Jy/beam ! Combined flux in latest and established models = 3.88758 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 3.88758 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.793405Jy sigma=12.035876 ! Fit after self-cal, rms=0.788734Jy sigma=11.965147 ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=7.443 mas, bpa=16.44 degrees ! Estimated noise=2.51075 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=7.742 mas, bpa=17.3 degrees ! Estimated noise=1.80594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.480153 Jy ! Component: 100 - total flux cleaned = 0.734915 Jy ! Component: 150 - total flux cleaned = 0.891 Jy ! Component: 200 - total flux cleaned = 0.991051 Jy ! Total flux subtracted in 200 components = 0.991051 Jy ! Clean residual min=-0.080116 max=0.125178 Jy/beam ! Clean residual mean=-0.000301 rms=0.026642 Jy/beam ! Combined flux in latest and established models = 4.87863 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 53 components and 4.87863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.494616Jy sigma=7.308684 ! Fit after self-cal, rms=0.492683Jy sigma=7.286237 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.131 x 7.742 at 17.3 degrees (North through East) ! Clean map min=-0.077742 max=3.4675 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02249 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.94 HN 0.98 KP 0.95 ! LA 1.20 MK 0.94 NL 0.93 OV 0.96 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98703 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.01 KP 0.97 ! LA 1.17 MK 1.03 NL 0.95 OV 0.99 ! PT 1.00* SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971096 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.03 KP 0.98 ! LA 0.93 MK 1.13 NL 1.05 OV 1.03 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02071 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.95 KP 0.90 ! LA 0.80 MK 1.15 NL 0.97 OV 0.87 ! PT 1.00* SC 1.11 ! ! ! Fit before self-cal, rms=0.492683Jy sigma=7.286237 ! Fit after self-cal, rms=0.210041Jy sigma=3.206861 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210041Jy sigma=3.206861 ! Fit after self-cal, rms=0.210048Jy sigma=3.206785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.847 mas, bpa=16.99 degrees ! Estimated noise=1.79813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217965 Jy ! Component: 100 - total flux cleaned = 0.0283417 Jy ! Component: 150 - total flux cleaned = 0.0298488 Jy ! Component: 200 - total flux cleaned = 0.0272292 Jy ! Total flux subtracted in 200 components = 0.0272292 Jy ! Clean residual min=-0.020656 max=0.023364 Jy/beam ! Clean residual mean=-0.000128 rms=0.005701 Jy/beam ! Combined flux in latest and established models = 4.90586 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 80 components and 4.90586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201925Jy sigma=3.078119 ! Fit after self-cal, rms=0.201818Jy sigma=3.071835 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201818Jy sigma=3.071835 ! Fit after self-cal, rms=0.196224Jy sigma=3.008616 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152251 Jy ! Component: 100 - total flux cleaned = 0.00204917 Jy ! Component: 150 - total flux cleaned = -0.0004545 Jy ! Component: 200 - total flux cleaned = -0.00231364 Jy ! Total flux subtracted in 200 components = -0.00231364 Jy ! Clean residual min=-0.018749 max=0.020043 Jy/beam ! Clean residual mean=-0.000122 rms=0.005103 Jy/beam ! Combined flux in latest and established models = 4.90354 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 96 components and 4.90354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193571Jy sigma=2.971796 ! Fit after self-cal, rms=0.192461Jy sigma=2.963508 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.23 x 7.847 at 16.99 degrees (North through East) ! Clean map min=-0.017307 max=3.4965 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192461Jy sigma=2.963508 ! Fit after self-cal, rms=0.100764Jy sigma=1.190839 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100764Jy sigma=1.190839 ! Fit after self-cal, rms=0.100452Jy sigma=1.188891 ! Inverting map and beam ! Estimated beam: bmin=3.236 mas, bmaj=7.852 mas, bpa=16.86 degrees ! Estimated noise=1.79798 mJy/beam. ! Added new window around map position (4.5, -0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.020335 Jy ! Component: 100 - total flux cleaned = 0.0238424 Jy ! Component: 150 - total flux cleaned = 0.0248348 Jy ! Component: 200 - total flux cleaned = 0.0256804 Jy ! Total flux subtracted in 200 components = 0.0256804 Jy ! Clean residual min=-0.010752 max=0.009840 Jy/beam ! Clean residual mean=-0.000060 rms=0.002791 Jy/beam ! Combined flux in latest and established models = 4.92922 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 118 components and 4.92923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093301Jy sigma=1.053837 ! Fit after self-cal, rms=0.092765Jy sigma=1.049243 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092765Jy sigma=1.049243 ! Fit after self-cal, rms=0.090738Jy sigma=1.026770 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090738Jy sigma=1.026770 ! Fit after self-cal, rms=0.090718Jy sigma=1.026676 ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.849 mas, bpa=16.78 degrees ! Estimated noise=1.79712 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00825115 Jy ! Component: 100 - total flux cleaned = 0.0103783 Jy ! Component: 150 - total flux cleaned = 0.010985 Jy ! Component: 200 - total flux cleaned = 0.0109824 Jy ! Total flux subtracted in 200 components = 0.0109824 Jy ! Clean residual min=-0.008754 max=0.007869 Jy/beam ! Clean residual mean=-0.000046 rms=0.002230 Jy/beam ! Combined flux in latest and established models = 4.94021 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 137 components and 4.94021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088620Jy sigma=0.982251 ! Fit after self-cal, rms=0.088450Jy sigma=0.981081 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.612 mas, bmaj=9.354 mas, bpa=9.551 degrees ! Estimated noise=2.2943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353507 Jy ! Component: 100 - total flux cleaned = -3.65915e-05 Jy ! Component: 150 - total flux cleaned = -0.00038426 Jy ! Component: 200 - total flux cleaned = -0.000383219 Jy ! Total flux subtracted in 200 components = -0.000383219 Jy ! Clean residual min=-0.008502 max=0.008650 Jy/beam ! Clean residual mean=-0.000065 rms=0.002455 Jy/beam ! Combined flux in latest and established models = 4.93982 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 159 components and 4.93982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088244Jy sigma=0.975726 ! Fit after self-cal, rms=0.088200Jy sigma=0.975374 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.637 mas, bmaj=7.501 mas, bpa=16.27 degrees ! Estimated noise=2.50514 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.98838 Jy ! Component: 100 - total flux cleaned = 3.83967 Jy ! Component: 150 - total flux cleaned = 4.21417 Jy ! Component: 200 - total flux cleaned = 4.43483 Jy ! Total flux subtracted in 200 components = 4.43483 Jy ! Clean residual min=-0.062911 max=0.086796 Jy/beam ! Clean residual mean=0.000091 rms=0.021695 Jy/beam ! Combined flux in latest and established models = 4.43483 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 4.43483 Jy ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.849 mas, bpa=16.78 degrees ! Estimated noise=1.79712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.187339 Jy ! Component: 100 - total flux cleaned = 0.297885 Jy ! Component: 150 - total flux cleaned = 0.369 Jy ! Component: 200 - total flux cleaned = 0.415882 Jy ! Total flux subtracted in 200 components = 0.415882 Jy ! Clean residual min=-0.019995 max=0.019110 Jy/beam ! Clean residual mean=-0.000032 rms=0.005504 Jy/beam ! Combined flux in latest and established models = 4.85071 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 85 components and 4.85071 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.612 mas, bmaj=9.354 mas, bpa=9.551 degrees ! Estimated noise=2.2943 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452345 Jy ! Component: 100 - total flux cleaned = 0.0676467 Jy ! Component: 150 - total flux cleaned = 0.0758501 Jy ! Component: 200 - total flux cleaned = 0.0792081 Jy ! Total flux subtracted in 200 components = 0.0792081 Jy ! Clean residual min=-0.010590 max=0.010051 Jy/beam ! Clean residual mean=-0.000080 rms=0.002997 Jy/beam ! Combined flux in latest and established models = 4.92992 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 134 components and 4.92992 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=7.849 mas, bpa=16.78 degrees ! Estimated noise=1.79712 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00714017 Jy ! Component: 100 - total flux cleaned = -0.0047267 Jy ! Component: 150 - total flux cleaned = -0.00154182 Jy ! Component: 200 - total flux cleaned = 0.00109344 Jy ! Total flux subtracted in 200 components = 0.00109344 Jy ! Clean residual min=-0.007831 max=0.007637 Jy/beam ! Clean residual mean=-0.000031 rms=0.002176 Jy/beam ! Combined flux in latest and established models = 4.93102 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 4.93102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088989Jy sigma=0.971047 ! Fit after self-cal, rms=0.088460Jy sigma=0.964880 wmodel J1613+3412_S_2006_02_14_yyk\_map.mod ! Writing 155 model components to file: J1613+3412_S_2006_02_14_yyk_map.mod wobs J1613+3412_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1613+3412_S_2006_02_14_yyk_uvs.fits wwins J1613+3412_S_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J1613+3412_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000905182 Jy ! Component: 100 - total flux cleaned = -0.00102237 Jy ! Component: 150 - total flux cleaned = -0.00102227 Jy ! Component: 200 - total flux cleaned = -0.000915301 Jy ! Component: 250 - total flux cleaned = -0.000914101 Jy ! Component: 300 - total flux cleaned = -0.00120121 Jy ! Component: 350 - total flux cleaned = -0.00156764 Jy ! Component: 400 - total flux cleaned = -0.00200859 Jy ! Component: 450 - total flux cleaned = -0.00226344 Jy ! Component: 500 - total flux cleaned = -0.00226504 Jy ! Component: 550 - total flux cleaned = -0.00242539 Jy ! Component: 600 - total flux cleaned = -0.00250341 Jy ! Component: 650 - total flux cleaned = -0.00265117 Jy ! Component: 700 - total flux cleaned = -0.00279431 Jy ! Component: 750 - total flux cleaned = -0.0028634 Jy ! Component: 800 - total flux cleaned = -0.00293047 Jy ! Component: 850 - total flux cleaned = -0.00319109 Jy ! Component: 900 - total flux cleaned = -0.00337996 Jy ! Component: 950 - total flux cleaned = -0.00368743 Jy ! Component: 1000 - total flux cleaned = -0.00380654 Jy ! Component: 1050 - total flux cleaned = -0.0041547 Jy ! Component: 1100 - total flux cleaned = -0.00404065 Jy ! Component: 1150 - total flux cleaned = -0.00409651 Jy ! Component: 1200 - total flux cleaned = -0.00415049 Jy ! Component: 1250 - total flux cleaned = -0.00415082 Jy ! Component: 1300 - total flux cleaned = -0.00430531 Jy ! Component: 1350 - total flux cleaned = -0.00440567 Jy ! Component: 1400 - total flux cleaned = -0.00440538 Jy ! Component: 1450 - total flux cleaned = -0.00445436 Jy ! Component: 1500 - total flux cleaned = -0.00455061 Jy ! Component: 1550 - total flux cleaned = -0.00459806 Jy ! Component: 1600 - total flux cleaned = -0.00459769 Jy ! Component: 1650 - total flux cleaned = -0.00468879 Jy ! Component: 1700 - total flux cleaned = -0.00477771 Jy ! Component: 1750 - total flux cleaned = -0.00468991 Jy ! Component: 1800 - total flux cleaned = -0.00464652 Jy ! Component: 1850 - total flux cleaned = -0.00464653 Jy ! Component: 1900 - total flux cleaned = -0.00456365 Jy ! Component: 1950 - total flux cleaned = -0.00452281 Jy ! Component: 2000 - total flux cleaned = -0.00448257 Jy ! Total flux subtracted in 2048 components = -0.0044032 Jy ! Clean residual min=-0.002366 max=0.002422 Jy/beam ! Clean residual mean=0.000001 rms=0.000777 Jy/beam ! Combined flux in latest and established models = 4.92661 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 288 components and 4.92661 Jy ![Exited script file: muppet] wmap "J1613+3412_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.234 x 7.849 at 16.78 degrees (North through East) ! Clean map min=-0.0085994 max=3.5064 Jy/beam ! Writing clean map to FITS file: J1613+3412_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.5064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000769249 device "J1613+3412_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1613+3412_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0658154 0.0658154 0.131631 0.263262 0.526523 1.05305 2.10609 4.21219 8.42437 16.8487 33.6975 67.395 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.506 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.234 x 7.849 at 16.78 degrees (North through East) ! Clean map min=-0.0085994 max=3.5064 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1613+3412_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1613+3412_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1613+3412_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:55:12 2006