! Started logfile: J1607+8502_S_2006_02_14_yyk_uvs.log on Wed Jul  5 12:52:02 2006
obs J1607+8502_S_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1607+8502_S_2006_02_14_yyk_uva.fits
! AN table 1: 874 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.382024 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1607+8502
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2683 lines of history.
! 
! Reading 60100 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1607+8502_S_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.080783 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.54 mas, bmaj=11.88 mas, bpa=-11.68 degrees
! Estimated noise=1.2511 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417542 Jy
! Component: 100  -  total flux cleaned = 0.0609692 Jy
! Total flux subtracted in 100 components = 0.0609692 Jy
! Clean residual min=-0.006166 max=0.007631 Jy/beam
! Clean residual mean=-0.000016 rms=0.001976 Jy/beam
! Combined flux in latest and established models = 0.0609692 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0609692 Jy
! 
! Correcting IF 1.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 64 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 57 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.055826Jy  sigma=1.205082
! Fit after  self-cal, rms=0.055785Jy  sigma=1.201416
! Inverting map and beam 
! Estimated beam: bmin=3.54 mas, bmaj=11.88 mas, bpa=-11.68 degrees
! Estimated noise=1.2511 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.401 mas, bmaj=11.98 mas, bpa=-5.137 degrees
! Estimated noise=0.574732 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0041781 Jy
! Component: 100  -  total flux cleaned = 0.00612283 Jy
! Component: 150  -  total flux cleaned = 0.00755841 Jy
! Component: 200  -  total flux cleaned = 0.00855905 Jy
! Total flux subtracted in 200 components = 0.00855905 Jy
! Clean residual min=-0.002648 max=0.002903 Jy/beam
! Clean residual mean=0.000011 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.0695283 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 42 components and 0.0695283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054396Jy  sigma=1.174808
! Fit after  self-cal, rms=0.054368Jy  sigma=1.174585
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.401 x 11.98 at -5.137 degrees (North through East)
! Clean map  min=-0.0025373  max=0.035476 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.998497
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.99     HN        0.85     KP        0.91     
!   LA        1.03     MK        1.00*    NL        0.96     OV        1.15     
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.054368Jy  sigma=1.174585
! Fit after  self-cal, rms=0.054186Jy  sigma=1.171701
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054186Jy  sigma=1.171701
! Fit after  self-cal, rms=0.054188Jy  sigma=1.171691
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=12.09 mas, bpa=-5.494 degrees
! Estimated noise=0.57535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440161 Jy
! Component: 100  -  total flux cleaned = 0.00104854 Jy
! Component: 150  -  total flux cleaned = 0.00152655 Jy
! Component: 200  -  total flux cleaned = 0.00194404 Jy
! Total flux subtracted in 200 components = 0.00194404 Jy
! Clean residual min=-0.002124 max=0.002581 Jy/beam
! Clean residual mean=0.000012 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.0714723 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.0714723 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053944Jy  sigma=1.166372
! Fit after  self-cal, rms=0.053928Jy  sigma=1.166303
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053928Jy  sigma=1.166303
! Fit after  self-cal, rms=0.048262Jy  sigma=0.984190
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045325 Jy
! Component: 100  -  total flux cleaned = 0.00542471 Jy
! Component: 150  -  total flux cleaned = 0.00593088 Jy
! Component: 200  -  total flux cleaned = 0.00627673 Jy
! Total flux subtracted in 200 components = 0.00627673 Jy
! Clean residual min=-0.001872 max=0.002335 Jy/beam
! Clean residual mean=0.000012 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.077749 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.077749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047358Jy  sigma=0.960812
! Fit after  self-cal, rms=0.047220Jy  sigma=0.956095
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.363 x 12.09 at -5.494 degrees (North through East)
! Clean map  min=-0.0018508  max=0.041534 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.95 mas, bmaj=10.79 mas, bpa=3.55 degrees
! Estimated noise=0.739206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147475 Jy
! Component: 100  -  total flux cleaned = 0.00202665 Jy
! Component: 150  -  total flux cleaned = 0.00227806 Jy
! Component: 200  -  total flux cleaned = 0.00233625 Jy
! Total flux subtracted in 200 components = 0.00233625 Jy
! Clean residual min=-0.002292 max=0.002691 Jy/beam
! Clean residual mean=0.000026 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.0800853 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 79 components and 0.0800853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047061Jy  sigma=0.955535
! Fit after  self-cal, rms=0.047003Jy  sigma=0.955042
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.528 mas, bmaj=11.92 mas, bpa=-11.93 degrees
! Estimated noise=1.24158 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0453411 Jy
! Component: 100  -  total flux cleaned = 0.0648875 Jy
! Component: 150  -  total flux cleaned = 0.075144 Jy
! Component: 200  -  total flux cleaned = 0.0806394 Jy
! Total flux subtracted in 200 components = 0.0806394 Jy
! Clean residual min=-0.004078 max=0.004706 Jy/beam
! Clean residual mean=0.000014 rms=0.001326 Jy/beam
! Combined flux in latest and established models = 0.0806394 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.0806394 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=12.09 mas, bpa=-5.494 degrees
! Estimated noise=0.57535 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00146334 Jy
! Component: 100  -  total flux cleaned = -0.00169288 Jy
! Component: 150  -  total flux cleaned = -0.00187071 Jy
! Component: 200  -  total flux cleaned = -0.00205411 Jy
! Total flux subtracted in 200 components = -0.00205411 Jy
! Clean residual min=-0.001840 max=0.002375 Jy/beam
! Clean residual mean=0.000012 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0785853 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.0785853 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.95 mas, bmaj=10.79 mas, bpa=3.55 degrees
! Estimated noise=0.739206 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136259 Jy
! Component: 100  -  total flux cleaned = 0.00139505 Jy
! Component: 150  -  total flux cleaned = 0.00129839 Jy
! Component: 200  -  total flux cleaned = 0.00121049 Jy
! Total flux subtracted in 200 components = 0.00121049 Jy
! Clean residual min=-0.002274 max=0.002763 Jy/beam
! Clean residual mean=0.000028 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.0797958 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 58 components and 0.0797958 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.363 mas, bmaj=12.09 mas, bpa=-5.494 degrees
! Estimated noise=0.57535 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000972509 Jy
! Component: 100  -  total flux cleaned = -0.00135488 Jy
! Component: 150  -  total flux cleaned = -0.00173127 Jy
! Component: 200  -  total flux cleaned = -0.00195283 Jy
! Total flux subtracted in 200 components = -0.00195283 Jy
! Clean residual min=-0.001821 max=0.002315 Jy/beam
! Clean residual mean=0.000011 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.077843 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 79 components and 0.0778429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047060Jy  sigma=0.955189
! Fit after  self-cal, rms=0.047103Jy  sigma=0.954984
wmodel J1607+8502_S_2006_02_14_yyk\_map.mod
! Writing 79 model components to file: J1607+8502_S_2006_02_14_yyk_map.mod
wobs J1607+8502_S_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1607+8502_S_2006_02_14_yyk_uvs.fits
wwins J1607+8502_S_2006_02_14_yyk\_map.win
! wwins: Wrote 1 windows to J1607+8502_S_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000937018 Jy
! Component: 100  -  total flux cleaned = 0.00170401 Jy
! Component: 150  -  total flux cleaned = 0.00225853 Jy
! Component: 200  -  total flux cleaned = 0.00259064 Jy
! Component: 250  -  total flux cleaned = 0.00288013 Jy
! Component: 300  -  total flux cleaned = 0.00317782 Jy
! Component: 350  -  total flux cleaned = 0.00333035 Jy
! Component: 400  -  total flux cleaned = 0.00345471 Jy
! Component: 450  -  total flux cleaned = 0.0035342 Jy
! Component: 500  -  total flux cleaned = 0.00357253 Jy
! Component: 550  -  total flux cleaned = 0.00359092 Jy
! Component: 600  -  total flux cleaned = 0.00364406 Jy
! Component: 650  -  total flux cleaned = 0.00364387 Jy
! Component: 700  -  total flux cleaned = 0.00362772 Jy
! Component: 750  -  total flux cleaned = 0.00359528 Jy
! Component: 800  -  total flux cleaned = 0.0034689 Jy
! Component: 850  -  total flux cleaned = 0.003376 Jy
! Component: 900  -  total flux cleaned = 0.00331543 Jy
! Component: 950  -  total flux cleaned = 0.00328587 Jy
! Component: 1000  -  total flux cleaned = 0.00324246 Jy
! Component: 1050  -  total flux cleaned = 0.00321397 Jy
! Component: 1100  -  total flux cleaned = 0.003116 Jy
! Component: 1150  -  total flux cleaned = 0.00301988 Jy
! Component: 1200  -  total flux cleaned = 0.00292559 Jy
! Component: 1250  -  total flux cleaned = 0.00281949 Jy
! Component: 1300  -  total flux cleaned = 0.00274117 Jy
! Component: 1350  -  total flux cleaned = 0.00263825 Jy
! Component: 1400  -  total flux cleaned = 0.0025114 Jy
! Component: 1450  -  total flux cleaned = 0.00239842 Jy
! Component: 1500  -  total flux cleaned = 0.00231153 Jy
! Component: 1550  -  total flux cleaned = 0.00216441 Jy
! Component: 1600  -  total flux cleaned = 0.00207947 Jy
! Component: 1650  -  total flux cleaned = 0.00198321 Jy
! Component: 1700  -  total flux cleaned = 0.00186401 Jy
! Component: 1750  -  total flux cleaned = 0.00175761 Jy
! Component: 1800  -  total flux cleaned = 0.00166377 Jy
! Component: 1850  -  total flux cleaned = 0.00161712 Jy
! Component: 1900  -  total flux cleaned = 0.00157074 Jy
! Component: 1950  -  total flux cleaned = 0.00150166 Jy
! Component: 2000  -  total flux cleaned = 0.00142151 Jy
! Total flux subtracted in 2048 components = 0.00141006 Jy
! Clean residual min=-0.000749 max=0.000618 Jy/beam
! Clean residual mean=0.000007 rms=0.000220 Jy/beam
! Combined flux in latest and established models = 0.079253 Jy
keep
! Adding 121 model components to the UV plane model.
! The established model now contains 200 components and 0.079253 Jy
![Exited script file: muppet]
wmap "J1607+8502_S_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.363 x 12.09 at -5.494 degrees (North through East)
! Clean map  min=-0.0019772  max=0.041487 Jy/beam
! Writing clean map to FITS file: J1607+8502_S_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0414866 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000267078 
device "J1607+8502_S_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1607+8502_S_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.93131 1.93131 3.86261 7.72523 15.4505 30.9009 61.8018
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.041 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.363 x 12.09 at -5.494 degrees (North through East)
! Clean map  min=-0.0019772  max=0.041487 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1607+8502_S_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1607+8502_S_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1607+8502_S_2006_02_14_yyk_uvs.log closed on Wed Jul  5 12:52:45 2006