! Started logfile: J1550+0527_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:47:35 2006 obs J1550+0527_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1550+0527_S_2006_02_23_yyk_uva.fits ! AN table 1: 221 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.851181 visibilities/baseline/integration-bin. ! Found source: J1550+0527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 33860 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1550+0527_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.63599 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.886 mas, bpa=-5.808 degrees ! Estimated noise=2.0107 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.1968 Jy ! Component: 100 - total flux cleaned = 2.52471 Jy ! Total flux subtracted in 100 components = 2.52471 Jy ! Clean residual min=-0.087375 max=0.093714 Jy/beam ! Clean residual mean=-0.000256 rms=0.023149 Jy/beam ! Combined flux in latest and established models = 2.52471 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 2.52471 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.430770Jy sigma=6.257222 ! Fit after self-cal, rms=0.429802Jy sigma=6.239629 ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=6.886 mas, bpa=-5.808 degrees ! Estimated noise=2.0107 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.074 mas, bpa=-8.285 degrees ! Estimated noise=1.48961 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.170014 Jy ! Component: 100 - total flux cleaned = 0.253472 Jy ! Component: 150 - total flux cleaned = 0.298195 Jy ! Component: 200 - total flux cleaned = 0.321245 Jy ! Total flux subtracted in 200 components = 0.321245 Jy ! Clean residual min=-0.069968 max=0.071279 Jy/beam ! Clean residual mean=-0.001591 rms=0.018488 Jy/beam ! Combined flux in latest and established models = 2.84595 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 2.84595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.368000Jy sigma=5.345024 ! Fit after self-cal, rms=0.367700Jy sigma=5.339104 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 8.074 at -8.285 degrees (North through East) ! Clean map min=-0.066993 max=2.5329 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00405 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.01 KP 0.95 ! LA 1.20 MK 0.90 NL 0.95 OV 0.95 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994449 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.05 HN 1.03 KP 0.96 ! LA 1.16 MK 0.97 NL 0.97 OV 0.97 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.962543 ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 1.05 KP 0.96 ! LA 0.92 MK 1.08 NL 1.06 OV 0.99 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03461 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.09 HN 0.99 KP 0.88 ! LA 0.79 MK 1.08 NL 0.99 OV 0.86 ! PT 0.93 SC 1.10 ! ! ! Fit before self-cal, rms=0.367700Jy sigma=5.339104 ! Fit after self-cal, rms=0.226835Jy sigma=2.929615 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226835Jy sigma=2.929615 ! Fit after self-cal, rms=0.226826Jy sigma=2.929403 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.194 mas, bpa=-8.265 degrees ! Estimated noise=1.4779 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440235 Jy ! Component: 100 - total flux cleaned = 0.0479623 Jy ! Component: 150 - total flux cleaned = 0.0445982 Jy ! Component: 200 - total flux cleaned = 0.041901 Jy ! Total flux subtracted in 200 components = 0.041901 Jy ! Clean residual min=-0.019560 max=0.020113 Jy/beam ! Clean residual mean=-0.000352 rms=0.004880 Jy/beam ! Combined flux in latest and established models = 2.88786 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 2.88786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215384Jy sigma=2.701760 ! Fit after self-cal, rms=0.215495Jy sigma=2.697401 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215495Jy sigma=2.697401 ! Fit after self-cal, rms=0.200085Jy sigma=2.528942 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309931 Jy ! Component: 100 - total flux cleaned = 0.00120177 Jy ! Component: 150 - total flux cleaned = -0.000837377 Jy ! Component: 200 - total flux cleaned = -0.00257477 Jy ! Total flux subtracted in 200 components = -0.00257477 Jy ! Clean residual min=-0.019484 max=0.015617 Jy/beam ! Clean residual mean=-0.000329 rms=0.004302 Jy/beam ! Combined flux in latest and established models = 2.88528 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 90 components and 2.88528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198556Jy sigma=2.500334 ! Fit after self-cal, rms=0.196280Jy sigma=2.479087 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.261 x 8.194 at -8.265 degrees (North through East) ! Clean map min=-0.018266 max=2.5336 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196280Jy sigma=2.479087 ! Fit after self-cal, rms=0.138629Jy sigma=1.197704 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138629Jy sigma=1.197704 ! Fit after self-cal, rms=0.138288Jy sigma=1.190241 ! Inverting map and beam ! Estimated beam: bmin=3.259 mas, bmaj=8.202 mas, bpa=-8.334 degrees ! Estimated noise=1.47644 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110844 Jy ! Component: 100 - total flux cleaned = 0.0115575 Jy ! Component: 150 - total flux cleaned = 0.0106944 Jy ! Component: 200 - total flux cleaned = 0.0102281 Jy ! Total flux subtracted in 200 components = 0.0102281 Jy ! Clean residual min=-0.013154 max=0.010109 Jy/beam ! Clean residual mean=-0.000327 rms=0.003247 Jy/beam ! Combined flux in latest and established models = 2.89551 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 103 components and 2.89551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136394Jy sigma=1.138463 ! Fit after self-cal, rms=0.136351Jy sigma=1.133404 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136351Jy sigma=1.133404 ! Fit after self-cal, rms=0.134098Jy sigma=1.101682 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134098Jy sigma=1.101682 ! Fit after self-cal, rms=0.134235Jy sigma=1.101226 ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.208 mas, bpa=-8.363 degrees ! Estimated noise=1.47616 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00465724 Jy ! Component: 100 - total flux cleaned = 0.00466176 Jy ! Component: 150 - total flux cleaned = 0.00427441 Jy ! Component: 200 - total flux cleaned = 0.00426453 Jy ! Total flux subtracted in 200 components = 0.00426453 Jy ! Clean residual min=-0.011250 max=0.008579 Jy/beam ! Clean residual mean=-0.000315 rms=0.002838 Jy/beam ! Combined flux in latest and established models = 2.89977 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 117 components and 2.89977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133477Jy sigma=1.079406 ! Fit after self-cal, rms=0.133472Jy sigma=1.077235 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=12.09 mas, bpa=2.987 degrees ! Estimated noise=1.84011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00344343 Jy ! Component: 100 - total flux cleaned = -0.00374434 Jy ! Component: 150 - total flux cleaned = -0.00399677 Jy ! Component: 200 - total flux cleaned = -0.00434429 Jy ! Total flux subtracted in 200 components = -0.00434429 Jy ! Clean residual min=-0.012947 max=0.011888 Jy/beam ! Clean residual mean=-0.000602 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 2.89543 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 2.89543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133356Jy sigma=1.074016 ! Fit after self-cal, rms=0.133341Jy sigma=1.071972 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=6.92 mas, bpa=-5.892 degrees ! Estimated noise=1.98425 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.16876 Jy ! Component: 100 - total flux cleaned = 2.49233 Jy ! Component: 150 - total flux cleaned = 2.62771 Jy ! Component: 200 - total flux cleaned = 2.70769 Jy ! Total flux subtracted in 200 components = 2.70769 Jy ! Clean residual min=-0.019449 max=0.031570 Jy/beam ! Clean residual mean=-0.000097 rms=0.007062 Jy/beam ! Combined flux in latest and established models = 2.70769 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 2.70769 Jy ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.208 mas, bpa=-8.363 degrees ! Estimated noise=1.47616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.077225 Jy ! Component: 100 - total flux cleaned = 0.121285 Jy ! Component: 150 - total flux cleaned = 0.148584 Jy ! Component: 200 - total flux cleaned = 0.165925 Jy ! Total flux subtracted in 200 components = 0.165925 Jy ! Clean residual min=-0.010367 max=0.011483 Jy/beam ! Clean residual mean=-0.000221 rms=0.003278 Jy/beam ! Combined flux in latest and established models = 2.87362 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 100 components and 2.87362 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=12.09 mas, bpa=2.987 degrees ! Estimated noise=1.84011 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0168127 Jy ! Component: 100 - total flux cleaned = 0.0202402 Jy ! Component: 150 - total flux cleaned = 0.0207628 Jy ! Component: 200 - total flux cleaned = 0.0211653 Jy ! Total flux subtracted in 200 components = 0.0211653 Jy ! Clean residual min=-0.012014 max=0.012482 Jy/beam ! Clean residual mean=-0.000584 rms=0.004000 Jy/beam ! Combined flux in latest and established models = 2.89478 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 141 components and 2.89478 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.26 mas, bmaj=8.208 mas, bpa=-8.363 degrees ! Estimated noise=1.47616 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157523 Jy ! Component: 100 - total flux cleaned = 0.00293661 Jy ! Component: 150 - total flux cleaned = 0.00346398 Jy ! Component: 200 - total flux cleaned = 0.00362372 Jy ! Total flux subtracted in 200 components = 0.00362372 Jy ! Clean residual min=-0.009432 max=0.008830 Jy/beam ! Clean residual mean=-0.000303 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 2.89841 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 158 components and 2.89841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133628Jy sigma=1.064564 ! Fit after self-cal, rms=0.133402Jy sigma=1.059277 wmodel J1550+0527_S_2006_02_23_yyk\_map.mod ! Writing 158 model components to file: J1550+0527_S_2006_02_23_yyk_map.mod wobs J1550+0527_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1550+0527_S_2006_02_23_yyk_uvs.fits wwins J1550+0527_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1550+0527_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00219084 Jy ! Component: 100 - total flux cleaned = -0.00261809 Jy ! Component: 150 - total flux cleaned = -0.00314287 Jy ! Component: 200 - total flux cleaned = -0.00326196 Jy ! Component: 250 - total flux cleaned = -0.0031501 Jy ! Component: 300 - total flux cleaned = -0.0033713 Jy ! Component: 350 - total flux cleaned = -0.00378189 Jy ! Component: 400 - total flux cleaned = -0.00418099 Jy ! Component: 450 - total flux cleaned = -0.00466228 Jy ! Component: 500 - total flux cleaned = -0.00521647 Jy ! Component: 550 - total flux cleaned = -0.0054822 Jy ! Component: 600 - total flux cleaned = -0.00590605 Jy ! Component: 650 - total flux cleaned = -0.00598814 Jy ! Component: 700 - total flux cleaned = -0.00630793 Jy ! Component: 750 - total flux cleaned = -0.00653732 Jy ! Component: 800 - total flux cleaned = -0.00698337 Jy ! Component: 850 - total flux cleaned = -0.00712823 Jy ! Component: 900 - total flux cleaned = -0.00762176 Jy ! Component: 950 - total flux cleaned = -0.00810291 Jy ! Component: 1000 - total flux cleaned = -0.00863805 Jy ! Component: 1050 - total flux cleaned = -0.0090291 Jy ! Component: 1100 - total flux cleaned = -0.00947586 Jy ! Component: 1150 - total flux cleaned = -0.00991099 Jy ! Component: 1200 - total flux cleaned = -0.0100325 Jy ! Component: 1250 - total flux cleaned = -0.0102711 Jy ! Component: 1300 - total flux cleaned = -0.0104459 Jy ! Component: 1350 - total flux cleaned = -0.010617 Jy ! Component: 1400 - total flux cleaned = -0.0107275 Jy ! Component: 1450 - total flux cleaned = -0.0107261 Jy ! Component: 1500 - total flux cleaned = -0.0107806 Jy ! Component: 1550 - total flux cleaned = -0.0108876 Jy ! Component: 1600 - total flux cleaned = -0.0109922 Jy ! Component: 1650 - total flux cleaned = -0.0109924 Jy ! Component: 1700 - total flux cleaned = -0.0111434 Jy ! Component: 1750 - total flux cleaned = -0.0111927 Jy ! Component: 1800 - total flux cleaned = -0.0111922 Jy ! Component: 1850 - total flux cleaned = -0.0112886 Jy ! Component: 1900 - total flux cleaned = -0.0112886 Jy ! Component: 1950 - total flux cleaned = -0.0113823 Jy ! Component: 2000 - total flux cleaned = -0.01152 Jy ! Total flux subtracted in 2048 components = -0.0114748 Jy ! Clean residual min=-0.002916 max=0.002658 Jy/beam ! Clean residual mean=-0.000076 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 2.88693 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 299 components and 2.88693 Jy ![Exited script file: muppet] wmap "J1550+0527_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 8.208 at -8.363 degrees (North through East) ! Clean map min=-0.0084019 max=2.5403 Jy/beam ! Writing clean map to FITS file: J1550+0527_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.54027 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000937676 device "J1550+0527_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1550+0527_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.110737 0.110737 0.221474 0.442949 0.885898 1.7718 3.54359 7.08718 14.1744 28.3487 56.6975 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.54 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.26 x 8.208 at -8.363 degrees (North through East) ! Clean map min=-0.0084019 max=2.5403 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1550+0527_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1550+0527_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1550+0527_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:48:18 2006