! Started logfile: J1550+0527_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:46:04 2006 obs J1550+0527_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1550+0527_S_2006_02_14_yyk_uva.fits ! AN table 1: 232 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.683812 visibilities/baseline/integration-bin. ! Found source: J1550+0527 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 28556 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1550+0527_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.87214 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=6.427 mas, bpa=-6.678 degrees ! Estimated noise=2.05364 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.39284 Jy ! Component: 100 - total flux cleaned = 2.78002 Jy ! Total flux subtracted in 100 components = 2.78002 Jy ! Clean residual min=-0.097147 max=0.121343 Jy/beam ! Clean residual mean=-0.001559 rms=0.029651 Jy/beam ! Combined flux in latest and established models = 2.78002 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 2.78002 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.428388Jy sigma=6.502915 ! Fit after self-cal, rms=0.426702Jy sigma=6.474000 ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=6.427 mas, bpa=-6.678 degrees ! Estimated noise=2.05364 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=7.555 mas, bpa=-7.566 degrees ! Estimated noise=1.65365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.168378 Jy ! Component: 100 - total flux cleaned = 0.248459 Jy ! Component: 150 - total flux cleaned = 0.290524 Jy ! Component: 200 - total flux cleaned = 0.314338 Jy ! Total flux subtracted in 200 components = 0.314338 Jy ! Clean residual min=-0.068378 max=0.083410 Jy/beam ! Clean residual mean=-0.000931 rms=0.021502 Jy/beam ! Combined flux in latest and established models = 3.09436 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 60 components and 3.09436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.359583Jy sigma=5.559241 ! Fit after self-cal, rms=0.358876Jy sigma=5.551552 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.109 x 7.555 at -7.566 degrees (North through East) ! Clean map min=-0.066217 max=2.7793 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00898 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 1.03 KP 0.96 ! LA 1.21 MK 0.88 NL 0.96 OV 0.97 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987182 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.98 HN 1.05 KP 0.98 ! LA 1.18 MK 0.96 NL 0.98 OV 0.99 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976748 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.99 HN 1.06 KP 0.98 ! LA 0.94 MK 1.08 NL 1.07 OV 1.02 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02601 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 0.98 KP 0.90 ! LA 0.80 MK 1.08 NL 0.99 OV 0.87 ! PT 1.00* SC 1.12 ! ! ! Fit before self-cal, rms=0.358876Jy sigma=5.551552 ! Fit after self-cal, rms=0.176701Jy sigma=2.837354 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176701Jy sigma=2.837354 ! Fit after self-cal, rms=0.176710Jy sigma=2.836958 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=7.669 mas, bpa=-7.793 degrees ! Estimated noise=1.64536 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680849 Jy ! Component: 100 - total flux cleaned = 0.0825921 Jy ! Component: 150 - total flux cleaned = 0.0893868 Jy ! Component: 200 - total flux cleaned = 0.0911226 Jy ! Total flux subtracted in 200 components = 0.0911226 Jy ! Clean residual min=-0.021279 max=0.019872 Jy/beam ! Clean residual mean=0.000052 rms=0.004692 Jy/beam ! Combined flux in latest and established models = 3.18548 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 100 components and 3.18548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156105Jy sigma=2.480818 ! Fit after self-cal, rms=0.155643Jy sigma=2.475127 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155643Jy sigma=2.475127 ! Fit after self-cal, rms=0.136233Jy sigma=2.171848 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00548354 Jy ! Component: 100 - total flux cleaned = 0.00622522 Jy ! Component: 150 - total flux cleaned = 0.00651922 Jy ! Component: 200 - total flux cleaned = 0.00601817 Jy ! Total flux subtracted in 200 components = 0.00601817 Jy ! Clean residual min=-0.020615 max=0.016487 Jy/beam ! Clean residual mean=0.000062 rms=0.004276 Jy/beam ! Combined flux in latest and established models = 3.1915 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 3.1915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134973Jy sigma=2.150894 ! Fit after self-cal, rms=0.133444Jy sigma=2.127500 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 7.669 at -7.793 degrees (North through East) ! Clean map min=-0.019531 max=2.7879 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133444Jy sigma=2.127500 ! Fit after self-cal, rms=0.072671Jy sigma=1.067018 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072671Jy sigma=1.067018 ! Fit after self-cal, rms=0.072499Jy sigma=1.063727 ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=7.668 mas, bpa=-7.866 degrees ! Estimated noise=1.64286 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125326 Jy ! Component: 100 - total flux cleaned = 0.0134609 Jy ! Component: 150 - total flux cleaned = 0.0134232 Jy ! Component: 200 - total flux cleaned = 0.0135923 Jy ! Total flux subtracted in 200 components = 0.0135923 Jy ! Clean residual min=-0.013970 max=0.011231 Jy/beam ! Clean residual mean=0.000029 rms=0.002900 Jy/beam ! Combined flux in latest and established models = 3.20509 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 3.20509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070302Jy sigma=1.022308 ! Fit after self-cal, rms=0.069935Jy sigma=1.018026 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069935Jy sigma=1.018026 ! Fit after self-cal, rms=0.066979Jy sigma=0.976830 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066979Jy sigma=0.976830 ! Fit after self-cal, rms=0.066977Jy sigma=0.976807 ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.667 mas, bpa=-7.871 degrees ! Estimated noise=1.64248 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00486403 Jy ! Component: 100 - total flux cleaned = 0.00541214 Jy ! Component: 150 - total flux cleaned = 0.00527281 Jy ! Component: 200 - total flux cleaned = 0.00488389 Jy ! Total flux subtracted in 200 components = 0.00488389 Jy ! Clean residual min=-0.011827 max=0.009691 Jy/beam ! Clean residual mean=0.000021 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 3.20998 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 3.20998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066091Jy sigma=0.961122 ! Fit after self-cal, rms=0.065893Jy sigma=0.959167 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.152 mas, bmaj=10.98 mas, bpa=5.072 degrees ! Estimated noise=2.08254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249049 Jy ! Component: 100 - total flux cleaned = -0.000987949 Jy ! Component: 150 - total flux cleaned = -0.000586446 Jy ! Component: 200 - total flux cleaned = -0.00025894 Jy ! Total flux subtracted in 200 components = -0.00025894 Jy ! Clean residual min=-0.010138 max=0.010428 Jy/beam ! Clean residual mean=0.000036 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 3.20972 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 3.20972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065801Jy sigma=0.957495 ! Fit after self-cal, rms=0.065529Jy sigma=0.953852 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.626 mas, bmaj=6.485 mas, bpa=-6.756 degrees ! Estimated noise=2.04325 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.38199 Jy ! Component: 100 - total flux cleaned = 2.74695 Jy ! Component: 150 - total flux cleaned = 2.89943 Jy ! Component: 200 - total flux cleaned = 2.9878 Jy ! Total flux subtracted in 200 components = 2.9878 Jy ! Clean residual min=-0.022878 max=0.035042 Jy/beam ! Clean residual mean=-0.000507 rms=0.008985 Jy/beam ! Combined flux in latest and established models = 2.9878 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 2.9878 Jy ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.667 mas, bpa=-7.871 degrees ! Estimated noise=1.64248 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0753062 Jy ! Component: 100 - total flux cleaned = 0.121084 Jy ! Component: 150 - total flux cleaned = 0.151019 Jy ! Component: 200 - total flux cleaned = 0.171748 Jy ! Total flux subtracted in 200 components = 0.171748 Jy ! Clean residual min=-0.011414 max=0.011790 Jy/beam ! Clean residual mean=-0.000112 rms=0.003361 Jy/beam ! Combined flux in latest and established models = 3.15954 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 95 components and 3.15954 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.152 mas, bmaj=10.98 mas, bpa=5.072 degrees ! Estimated noise=2.08254 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222941 Jy ! Component: 100 - total flux cleaned = 0.0337084 Jy ! Component: 150 - total flux cleaned = 0.0405846 Jy ! Component: 200 - total flux cleaned = 0.044987 Jy ! Total flux subtracted in 200 components = 0.044987 Jy ! Clean residual min=-0.009871 max=0.010778 Jy/beam ! Clean residual mean=0.000008 rms=0.003342 Jy/beam ! Combined flux in latest and established models = 3.20453 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 153 components and 3.20453 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.667 mas, bpa=-7.871 degrees ! Estimated noise=1.64248 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000267535 Jy ! Component: 100 - total flux cleaned = -0.000407003 Jy ! Component: 150 - total flux cleaned = 0.000104221 Jy ! Component: 200 - total flux cleaned = 0.000807406 Jy ! Total flux subtracted in 200 components = 0.000807406 Jy ! Clean residual min=-0.008913 max=0.008835 Jy/beam ! Clean residual mean=0.000008 rms=0.002359 Jy/beam ! Combined flux in latest and established models = 3.20534 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 166 components and 3.20534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065458Jy sigma=0.950747 ! Fit after self-cal, rms=0.065190Jy sigma=0.946810 wmodel J1550+0527_S_2006_02_14_yyk\_map.mod ! Writing 166 model components to file: J1550+0527_S_2006_02_14_yyk_map.mod wobs J1550+0527_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1550+0527_S_2006_02_14_yyk_uvs.fits wwins J1550+0527_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1550+0527_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131861 Jy ! Component: 100 - total flux cleaned = 0.00199514 Jy ! Component: 150 - total flux cleaned = 0.0027428 Jy ! Component: 200 - total flux cleaned = 0.00332119 Jy ! Component: 250 - total flux cleaned = 0.00408339 Jy ! Component: 300 - total flux cleaned = 0.00480218 Jy ! Component: 350 - total flux cleaned = 0.00528359 Jy ! Component: 400 - total flux cleaned = 0.00574206 Jy ! Component: 450 - total flux cleaned = 0.00608954 Jy ! Component: 500 - total flux cleaned = 0.00625348 Jy ! Component: 550 - total flux cleaned = 0.00648818 Jy ! Component: 600 - total flux cleaned = 0.00634016 Jy ! Component: 650 - total flux cleaned = 0.00619809 Jy ! Component: 700 - total flux cleaned = 0.00599314 Jy ! Component: 750 - total flux cleaned = 0.00586325 Jy ! Component: 800 - total flux cleaned = 0.005674 Jy ! Component: 850 - total flux cleaned = 0.00561085 Jy ! Component: 900 - total flux cleaned = 0.00537714 Jy ! Component: 950 - total flux cleaned = 0.0052653 Jy ! Component: 1000 - total flux cleaned = 0.0051007 Jy ! Component: 1050 - total flux cleaned = 0.0049426 Jy ! Component: 1100 - total flux cleaned = 0.00494435 Jy ! Component: 1150 - total flux cleaned = 0.00479235 Jy ! Component: 1200 - total flux cleaned = 0.00454697 Jy ! Component: 1250 - total flux cleaned = 0.00435418 Jy ! Component: 1300 - total flux cleaned = 0.00421336 Jy ! Component: 1350 - total flux cleaned = 0.00398675 Jy ! Component: 1400 - total flux cleaned = 0.0038548 Jy ! Component: 1450 - total flux cleaned = 0.00394226 Jy ! Component: 1500 - total flux cleaned = 0.00390012 Jy ! Component: 1550 - total flux cleaned = 0.00381737 Jy ! Component: 1600 - total flux cleaned = 0.00381741 Jy ! Component: 1650 - total flux cleaned = 0.00365836 Jy ! Component: 1700 - total flux cleaned = 0.00358089 Jy ! Component: 1750 - total flux cleaned = 0.00358147 Jy ! Component: 1800 - total flux cleaned = 0.00369468 Jy ! Component: 1850 - total flux cleaned = 0.00391415 Jy ! Component: 1900 - total flux cleaned = 0.00387736 Jy ! Component: 1950 - total flux cleaned = 0.00384206 Jy ! Component: 2000 - total flux cleaned = 0.00391275 Jy ! Total flux subtracted in 2048 components = 0.0040835 Jy ! Clean residual min=-0.002244 max=0.001893 Jy/beam ! Clean residual mean=-0.000002 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 3.20942 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 310 components and 3.20942 Jy ![Exited script file: muppet] wmap "J1550+0527_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.144 x 7.667 at -7.871 degrees (North through East) ! Clean map min=-0.006876 max=2.7911 Jy/beam ! Writing clean map to FITS file: J1550+0527_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.79108 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000716631 device "J1550+0527_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1550+0527_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0770272 0.0770272 0.154054 0.308109 0.616217 1.23243 2.46487 4.92974 9.85948 19.719 39.4379 78.8758 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.791 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.144 x 7.667 at -7.871 degrees (North through East) ! Clean map min=-0.006876 max=2.7911 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1550+0527_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1550+0527_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1550+0527_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:46:47 2006