! Started logfile: J1540+1447_X_2006_02_16_yyk_uvs.log on Wed Jul 5 12:44:33 2006 obs J1540+1447_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1540+1447_X_2006_02_16_yyk_uva.fits ! AN table 1: 149 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.88173 visibilities/baseline/integration-bin. ! Found source: J1540+1447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 23648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1540+1447_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.931086 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7222 mas, bmaj=1.906 mas, bpa=5.584 degrees ! Estimated noise=2.14532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.773336 Jy ! Component: 100 - total flux cleaned = 0.95009 Jy ! Total flux subtracted in 100 components = 0.95009 Jy ! Clean residual min=-0.030372 max=0.050166 Jy/beam ! Clean residual mean=-0.000182 rms=0.010080 Jy/beam ! Combined flux in latest and established models = 0.95009 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.95009 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.164110Jy sigma=2.336246 ! Fit after self-cal, rms=0.160659Jy sigma=2.306147 ! Inverting map and beam ! Estimated beam: bmin=0.7222 mas, bmaj=1.906 mas, bpa=5.584 degrees ! Estimated noise=2.14532 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.864 mas, bmaj=2.135 mas, bpa=3.772 degrees ! Estimated noise=1.63756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0729714 Jy ! Component: 100 - total flux cleaned = 0.103745 Jy ! Component: 150 - total flux cleaned = 0.121027 Jy ! Component: 200 - total flux cleaned = 0.131234 Jy ! Total flux subtracted in 200 components = 0.131234 Jy ! Clean residual min=-0.026279 max=0.027750 Jy/beam ! Clean residual mean=-0.000084 rms=0.006028 Jy/beam ! Combined flux in latest and established models = 1.08132 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 32 components and 1.08132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135224Jy sigma=1.840362 ! Fit after self-cal, rms=0.135126Jy sigma=1.837816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.864 x 2.135 at 3.772 degrees (North through East) ! Clean map min=-0.023512 max=0.88654 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.992154 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.08 KP 0.98 ! LA 1.01 MK 1.02 NL 1.01 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01718 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.05 KP 0.90 ! LA 0.95 MK 0.98 NL 0.99 OV 0.99 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00143 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.05 HN 0.96 KP 0.85 ! LA 0.96 MK 1.06 NL 0.96 OV 1.03 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.980015 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.06 HN 0.98 KP 0.87 ! LA 0.97 MK 1.08 NL 0.97 OV 1.08 ! PT 1.12 SC 1.04 ! ! ! Fit before self-cal, rms=0.135126Jy sigma=1.837816 ! Fit after self-cal, rms=0.115667Jy sigma=1.477775 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115667Jy sigma=1.477775 ! Fit after self-cal, rms=0.115659Jy sigma=1.477696 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8724 mas, bmaj=2.147 mas, bpa=4.162 degrees ! Estimated noise=1.63423 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967711 Jy ! Component: 100 - total flux cleaned = 0.00762662 Jy ! Component: 150 - total flux cleaned = 0.00601108 Jy ! Component: 200 - total flux cleaned = 0.00574807 Jy ! Total flux subtracted in 200 components = 0.00574807 Jy ! Clean residual min=-0.007995 max=0.008679 Jy/beam ! Clean residual mean=-0.000017 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 1.08707 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 52 components and 1.08707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112782Jy sigma=1.414477 ! Fit after self-cal, rms=0.112608Jy sigma=1.411615 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112608Jy sigma=1.411615 ! Fit after self-cal, rms=0.088203Jy sigma=1.118041 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313877 Jy ! Component: 100 - total flux cleaned = 0.00449752 Jy ! Component: 150 - total flux cleaned = 0.00468476 Jy ! Component: 200 - total flux cleaned = 0.00470139 Jy ! Total flux subtracted in 200 components = 0.00470139 Jy ! Clean residual min=-0.007988 max=0.006903 Jy/beam ! Clean residual mean=-0.000013 rms=0.002033 Jy/beam ! Combined flux in latest and established models = 1.09177 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 68 components and 1.09177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087155Jy sigma=1.101424 ! Fit after self-cal, rms=0.083215Jy sigma=1.065187 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8724 x 2.147 at 4.162 degrees (North through East) ! Clean map min=-0.0077722 max=0.88737 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083215Jy sigma=1.065187 ! Fit after self-cal, rms=0.079745Jy sigma=0.974884 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079745Jy sigma=0.974884 ! Fit after self-cal, rms=0.079218Jy sigma=0.970763 ! Inverting map and beam ! Estimated beam: bmin=0.8732 mas, bmaj=2.147 mas, bpa=4.034 degrees ! Estimated noise=1.63156 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405078 Jy ! Component: 100 - total flux cleaned = 0.00421414 Jy ! Component: 150 - total flux cleaned = 0.00420869 Jy ! Component: 200 - total flux cleaned = 0.00408542 Jy ! Total flux subtracted in 200 components = 0.00408542 Jy ! Clean residual min=-0.007199 max=0.006161 Jy/beam ! Clean residual mean=-0.000008 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 1.09586 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 1.09586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078678Jy sigma=0.959861 ! Fit after self-cal, rms=0.078516Jy sigma=0.958721 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078516Jy sigma=0.958721 ! Fit after self-cal, rms=0.078371Jy sigma=0.945715 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078371Jy sigma=0.945715 ! Fit after self-cal, rms=0.078351Jy sigma=0.945668 ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.148 mas, bpa=3.96 degrees ! Estimated noise=1.6314 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185803 Jy ! Component: 100 - total flux cleaned = 0.00187364 Jy ! Component: 150 - total flux cleaned = 0.00176887 Jy ! Component: 200 - total flux cleaned = 0.00167741 Jy ! Total flux subtracted in 200 components = 0.00167741 Jy ! Clean residual min=-0.007240 max=0.006498 Jy/beam ! Clean residual mean=-0.000008 rms=0.001560 Jy/beam ! Combined flux in latest and established models = 1.09754 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 83 components and 1.09754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078065Jy sigma=0.940478 ! Fit after self-cal, rms=0.078030Jy sigma=0.940156 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=3.148 mas, bpa=-4.14 degrees ! Estimated noise=2.14334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015931 Jy ! Component: 100 - total flux cleaned = 0.00231055 Jy ! Component: 150 - total flux cleaned = 0.00270582 Jy ! Component: 200 - total flux cleaned = 0.00293405 Jy ! Total flux subtracted in 200 components = 0.00293405 Jy ! Clean residual min=-0.005464 max=0.007725 Jy/beam ! Clean residual mean=-0.000007 rms=0.002046 Jy/beam ! Combined flux in latest and established models = 1.10047 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 90 components and 1.10047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078016Jy sigma=0.939854 ! Fit after self-cal, rms=0.077981Jy sigma=0.939337 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7257 mas, bmaj=1.915 mas, bpa=5.706 degrees ! Estimated noise=2.13083 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.7695 Jy ! Component: 100 - total flux cleaned = 0.943373 Jy ! Component: 150 - total flux cleaned = 1.00762 Jy ! Component: 200 - total flux cleaned = 1.04121 Jy ! Total flux subtracted in 200 components = 1.04121 Jy ! Clean residual min=-0.009875 max=0.013191 Jy/beam ! Clean residual mean=-0.000054 rms=0.002947 Jy/beam ! Combined flux in latest and established models = 1.04121 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.04121 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.148 mas, bpa=3.96 degrees ! Estimated noise=1.6314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230107 Jy ! Component: 100 - total flux cleaned = 0.0355758 Jy ! Component: 150 - total flux cleaned = 0.0435312 Jy ! Component: 200 - total flux cleaned = 0.0466803 Jy ! Total flux subtracted in 200 components = 0.0466803 Jy ! Clean residual min=-0.007215 max=0.005984 Jy/beam ! Clean residual mean=-0.000018 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 1.08789 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 1.08789 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.127 mas, bmaj=3.148 mas, bpa=-4.14 degrees ! Estimated noise=2.14334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00584937 Jy ! Component: 100 - total flux cleaned = 0.00886454 Jy ! Component: 150 - total flux cleaned = 0.00953336 Jy ! Component: 200 - total flux cleaned = 0.00989085 Jy ! Total flux subtracted in 200 components = 0.00989085 Jy ! Clean residual min=-0.005703 max=0.007635 Jy/beam ! Clean residual mean=-0.000012 rms=0.002108 Jy/beam ! Combined flux in latest and established models = 1.09778 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 59 components and 1.09778 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8739 mas, bmaj=2.148 mas, bpa=3.96 degrees ! Estimated noise=1.6314 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00223581 Jy ! Component: 100 - total flux cleaned = -0.00206764 Jy ! Component: 150 - total flux cleaned = -0.00191957 Jy ! Component: 200 - total flux cleaned = -0.00177851 Jy ! Total flux subtracted in 200 components = -0.00177851 Jy ! Clean residual min=-0.007173 max=0.006115 Jy/beam ! Clean residual mean=-0.000010 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 1.096 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 72 components and 1.096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078429Jy sigma=0.946930 ! Fit after self-cal, rms=0.078278Jy sigma=0.944984 wmodel J1540+1447_X_2006_02_16_yyk\_map.mod ! Writing 72 model components to file: J1540+1447_X_2006_02_16_yyk_map.mod wobs J1540+1447_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1540+1447_X_2006_02_16_yyk_uvs.fits wwins J1540+1447_X_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J1540+1447_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543851 Jy ! Component: 100 - total flux cleaned = -0.000351089 Jy ! Component: 150 - total flux cleaned = -0.000167665 Jy ! Component: 200 - total flux cleaned = -0.000167067 Jy ! Component: 250 - total flux cleaned = -0.000583719 Jy ! Component: 300 - total flux cleaned = -0.000980388 Jy ! Component: 350 - total flux cleaned = -0.00113354 Jy ! Component: 400 - total flux cleaned = -0.00128516 Jy ! Component: 450 - total flux cleaned = -0.00157315 Jy ! Component: 500 - total flux cleaned = -0.00164349 Jy ! Component: 550 - total flux cleaned = -0.00177937 Jy ! Component: 600 - total flux cleaned = -0.00191189 Jy ! Component: 650 - total flux cleaned = -0.00197552 Jy ! Component: 700 - total flux cleaned = -0.00203626 Jy ! Component: 750 - total flux cleaned = -0.00215752 Jy ! Component: 800 - total flux cleaned = -0.00227559 Jy ! Component: 850 - total flux cleaned = -0.00221759 Jy ! Component: 900 - total flux cleaned = -0.00221741 Jy ! Component: 950 - total flux cleaned = -0.00216066 Jy ! Component: 1000 - total flux cleaned = -0.00210721 Jy ! Component: 1050 - total flux cleaned = -0.00226395 Jy ! Component: 1100 - total flux cleaned = -0.00210859 Jy ! Component: 1150 - total flux cleaned = -0.00211008 Jy ! Component: 1200 - total flux cleaned = -0.00245526 Jy ! Component: 1250 - total flux cleaned = -0.00255133 Jy ! Component: 1300 - total flux cleaned = -0.00245554 Jy ! Component: 1350 - total flux cleaned = -0.00245498 Jy ! Component: 1400 - total flux cleaned = -0.00250136 Jy ! Component: 1450 - total flux cleaned = -0.0024568 Jy ! Component: 1500 - total flux cleaned = -0.00263527 Jy ! Component: 1550 - total flux cleaned = -0.00267834 Jy ! Component: 1600 - total flux cleaned = -0.00276432 Jy ! Component: 1650 - total flux cleaned = -0.00280645 Jy ! Component: 1700 - total flux cleaned = -0.00280668 Jy ! Component: 1750 - total flux cleaned = -0.00272428 Jy ! Component: 1800 - total flux cleaned = -0.00284715 Jy ! Component: 1850 - total flux cleaned = -0.00292802 Jy ! Component: 1900 - total flux cleaned = -0.00304738 Jy ! Component: 1950 - total flux cleaned = -0.00308678 Jy ! Component: 2000 - total flux cleaned = -0.00316421 Jy ! Total flux subtracted in 2048 components = -0.00327957 Jy ! Clean residual min=-0.002247 max=0.002200 Jy/beam ! Clean residual mean=-0.000009 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 1.09272 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 201 components and 1.09272 Jy ![Exited script file: muppet] wmap "J1540+1447_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8739 x 2.148 at 3.96 degrees (North through East) ! Clean map min=-0.003407 max=0.89399 Jy/beam ! Writing clean map to FITS file: J1540+1447_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.89399 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000665267 device "J1540+1447_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1540+1447_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.223246 0.223246 0.446493 0.892986 1.78597 3.57194 7.14389 14.2878 28.5755 57.1511 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.893 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8739 x 2.148 at 3.96 degrees (North through East) ! Clean map min=-0.003407 max=0.89399 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1540+1447_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1540+1447_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1540+1447_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:45:20 2006