! Started logfile: J1540+1447_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:43:03 2006 obs J1540+1447_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1540+1447_S_2006_02_23_yyk_uva.fits ! AN table 1: 139 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.93733 visibilities/baseline/integration-bin. ! Found source: J1540+1447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 23452 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1540+1447_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.695999 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.871 mas, bpa=7.618 degrees ! Estimated noise=2.07635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.567341 Jy ! Component: 100 - total flux cleaned = 0.679864 Jy ! Total flux subtracted in 100 components = 0.679864 Jy ! Clean residual min=-0.024153 max=0.033817 Jy/beam ! Clean residual mean=0.000205 rms=0.007864 Jy/beam ! Combined flux in latest and established models = 0.679864 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.679864 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.143332Jy sigma=2.011246 ! Fit after self-cal, rms=0.143116Jy sigma=2.006525 ! Inverting map and beam ! Estimated beam: bmin=2.632 mas, bmaj=6.871 mas, bpa=7.618 degrees ! Estimated noise=2.07635 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.568 mas, bpa=5.702 degrees ! Estimated noise=1.62889 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427125 Jy ! Component: 100 - total flux cleaned = 0.0656813 Jy ! Component: 150 - total flux cleaned = 0.0790938 Jy ! Component: 200 - total flux cleaned = 0.0837992 Jy ! Total flux subtracted in 200 components = 0.0837992 Jy ! Clean residual min=-0.019167 max=0.025365 Jy/beam ! Clean residual mean=0.000005 rms=0.006610 Jy/beam ! Combined flux in latest and established models = 0.763663 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 39 components and 0.763663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128972Jy sigma=1.812608 ! Fit after self-cal, rms=0.128898Jy sigma=1.811404 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.252 x 7.568 at 5.702 degrees (North through East) ! Clean map min=-0.018334 max=0.64177 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01549 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.92 HN 0.98 KP 0.95 ! LA 1.18 MK 0.93 NL 0.92 OV 1.02 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00133 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.01 KP 0.97 ! LA 1.12 MK 1.03 NL 0.95 OV 1.02 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.959976 ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.98 HN 1.05 KP 0.98 ! LA 0.90 MK 1.15 NL 1.05 OV 1.08 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03801 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.96 KP 0.91 ! LA 0.76 MK 1.12 NL 0.96 OV 0.91 ! PT 0.93 SC 1.10 ! ! ! Fit before self-cal, rms=0.128898Jy sigma=1.811404 ! Fit after self-cal, rms=0.100754Jy sigma=1.383954 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100754Jy sigma=1.383954 ! Fit after self-cal, rms=0.100708Jy sigma=1.383680 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.318 mas, bmaj=7.713 mas, bpa=6.344 degrees ! Estimated noise=1.63456 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000975 Jy ! Component: 100 - total flux cleaned = -3.55093e-06 Jy ! Component: 150 - total flux cleaned = -0.000392251 Jy ! Component: 200 - total flux cleaned = -0.000739346 Jy ! Total flux subtracted in 200 components = -0.000739346 Jy ! Clean residual min=-0.014828 max=0.021495 Jy/beam ! Clean residual mean=0.000083 rms=0.005182 Jy/beam ! Combined flux in latest and established models = 0.762924 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.762924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100426Jy sigma=1.376846 ! Fit after self-cal, rms=0.100349Jy sigma=1.376005 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100349Jy sigma=1.376005 ! Fit after self-cal, rms=0.098355Jy sigma=1.346552 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986956 Jy ! Component: 100 - total flux cleaned = 0.000628155 Jy ! Component: 150 - total flux cleaned = 0.000326126 Jy ! Component: 200 - total flux cleaned = 0.000146407 Jy ! Total flux subtracted in 200 components = 0.000146407 Jy ! Clean residual min=-0.014592 max=0.021301 Jy/beam ! Clean residual mean=0.000082 rms=0.005111 Jy/beam ! Combined flux in latest and established models = 0.763071 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.763071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098291Jy sigma=1.342816 ! Fit after self-cal, rms=0.098022Jy sigma=1.338732 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.318 x 7.713 at 6.344 degrees (North through East) ! Clean map min=-0.014334 max=0.64658 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098022Jy sigma=1.338732 ! Fit after self-cal, rms=0.089406Jy sigma=1.176470 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089406Jy sigma=1.176470 ! Fit after self-cal, rms=0.089422Jy sigma=1.175957 ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.724 mas, bpa=6.422 degrees ! Estimated noise=1.63164 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -3.37162e-05 Jy ! Component: 100 - total flux cleaned = -0.000406497 Jy ! Component: 150 - total flux cleaned = -0.000650859 Jy ! Component: 200 - total flux cleaned = -0.000653614 Jy ! Total flux subtracted in 200 components = -0.000653614 Jy ! Clean residual min=-0.014278 max=0.021449 Jy/beam ! Clean residual mean=0.000090 rms=0.005093 Jy/beam ! Combined flux in latest and established models = 0.762417 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.762417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089406Jy sigma=1.173259 ! Fit after self-cal, rms=0.089351Jy sigma=1.172861 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089351Jy sigma=1.172861 ! Fit after self-cal, rms=0.088912Jy sigma=1.161794 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088912Jy sigma=1.161794 ! Fit after self-cal, rms=0.088918Jy sigma=1.161775 ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.726 mas, bpa=6.471 degrees ! Estimated noise=1.63128 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.63693e-05 Jy ! Component: 100 - total flux cleaned = -8.74052e-05 Jy ! Component: 150 - total flux cleaned = -8.64668e-05 Jy ! Component: 200 - total flux cleaned = -8.56089e-05 Jy ! Total flux subtracted in 200 components = -8.56089e-05 Jy ! Clean residual min=-0.014211 max=0.021284 Jy/beam ! Clean residual mean=0.000088 rms=0.005066 Jy/beam ! Combined flux in latest and established models = 0.762331 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.762331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088917Jy sigma=1.159856 ! Fit after self-cal, rms=0.088862Jy sigma=1.159661 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.603 mas, bmaj=10.81 mas, bpa=-2.389 degrees ! Estimated noise=2.07363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00434011 Jy ! Component: 100 - total flux cleaned = 0.00326242 Jy ! Component: 150 - total flux cleaned = 0.00284939 Jy ! Component: 200 - total flux cleaned = 0.00301014 Jy ! Total flux subtracted in 200 components = 0.00301014 Jy ! Clean residual min=-0.021676 max=0.028491 Jy/beam ! Clean residual mean=0.000183 rms=0.009106 Jy/beam ! Combined flux in latest and established models = 0.765342 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.765341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090442Jy sigma=1.180205 ! Fit after self-cal, rms=0.089271Jy sigma=1.164933 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.666 mas, bmaj=6.94 mas, bpa=7.905 degrees ! Estimated noise=2.06455 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.564001 Jy ! Component: 100 - total flux cleaned = 0.674303 Jy ! Component: 150 - total flux cleaned = 0.711175 Jy ! Component: 200 - total flux cleaned = 0.728455 Jy ! Total flux subtracted in 200 components = 0.728455 Jy ! Clean residual min=-0.013737 max=0.021173 Jy/beam ! Clean residual mean=0.000088 rms=0.004493 Jy/beam ! Combined flux in latest and established models = 0.728455 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.728455 Jy ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.726 mas, bpa=6.471 degrees ! Estimated noise=1.63128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284363 Jy ! Component: 100 - total flux cleaned = 0.0405094 Jy ! Component: 150 - total flux cleaned = 0.0456491 Jy ! Component: 200 - total flux cleaned = 0.0494504 Jy ! Total flux subtracted in 200 components = 0.0494504 Jy ! Clean residual min=-0.011750 max=0.016096 Jy/beam ! Clean residual mean=0.000060 rms=0.004131 Jy/beam ! Combined flux in latest and established models = 0.777905 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 60 components and 0.777905 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.603 mas, bmaj=10.81 mas, bpa=-2.389 degrees ! Estimated noise=2.07363 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480207 Jy ! Component: 100 - total flux cleaned = 0.00685262 Jy ! Component: 150 - total flux cleaned = 0.00858126 Jy ! Component: 200 - total flux cleaned = 0.00972599 Jy ! Total flux subtracted in 200 components = 0.009726 Jy ! Clean residual min=-0.018527 max=0.021009 Jy/beam ! Clean residual mean=0.000089 rms=0.007111 Jy/beam ! Combined flux in latest and established models = 0.787631 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 0.787631 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.726 mas, bpa=6.471 degrees ! Estimated noise=1.63128 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166083 Jy ! Component: 100 - total flux cleaned = -0.00145931 Jy ! Component: 150 - total flux cleaned = -0.00148873 Jy ! Component: 200 - total flux cleaned = -0.00125647 Jy ! Total flux subtracted in 200 components = -0.00125647 Jy ! Clean residual min=-0.011741 max=0.015523 Jy/beam ! Clean residual mean=0.000043 rms=0.003954 Jy/beam ! Combined flux in latest and established models = 0.786374 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 0.786374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084400Jy sigma=1.065224 ! Fit after self-cal, rms=0.084000Jy sigma=1.060072 wmodel J1540+1447_S_2006_02_23_yyk\_map.mod ! Writing 102 model components to file: J1540+1447_S_2006_02_23_yyk_map.mod wobs J1540+1447_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1540+1447_S_2006_02_23_yyk_uvs.fits wwins J1540+1447_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1540+1447_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00648346 Jy ! Component: 100 - total flux cleaned = 0.00928055 Jy ! Component: 150 - total flux cleaned = 0.0109954 Jy ! Component: 200 - total flux cleaned = 0.0130866 Jy ! Component: 250 - total flux cleaned = 0.0145406 Jy ! Component: 300 - total flux cleaned = 0.0156042 Jy ! Component: 350 - total flux cleaned = 0.0164706 Jy ! Component: 400 - total flux cleaned = 0.0174286 Jy ! Component: 450 - total flux cleaned = 0.0183365 Jy ! Component: 500 - total flux cleaned = 0.0190755 Jy ! Component: 550 - total flux cleaned = 0.0200138 Jy ! Component: 600 - total flux cleaned = 0.0212436 Jy ! Component: 650 - total flux cleaned = 0.0224212 Jy ! Component: 700 - total flux cleaned = 0.0238528 Jy ! Component: 750 - total flux cleaned = 0.0250296 Jy ! Component: 800 - total flux cleaned = 0.0261581 Jy ! Component: 850 - total flux cleaned = 0.0269748 Jy ! Component: 900 - total flux cleaned = 0.0278506 Jy ! Component: 950 - total flux cleaned = 0.0286093 Jy ! Component: 1000 - total flux cleaned = 0.0291774 Jy ! Component: 1050 - total flux cleaned = 0.0297236 Jy ! Component: 1100 - total flux cleaned = 0.0301761 Jy ! Component: 1150 - total flux cleaned = 0.0305404 Jy ! Component: 1200 - total flux cleaned = 0.0310337 Jy ! Component: 1250 - total flux cleaned = 0.0313751 Jy ! Component: 1300 - total flux cleaned = 0.0317719 Jy ! Component: 1350 - total flux cleaned = 0.032092 Jy ! Component: 1400 - total flux cleaned = 0.0324034 Jy ! Component: 1450 - total flux cleaned = 0.0327039 Jy ! Component: 1500 - total flux cleaned = 0.0329953 Jy ! Component: 1550 - total flux cleaned = 0.0331649 Jy ! Component: 1600 - total flux cleaned = 0.0332211 Jy ! Component: 1650 - total flux cleaned = 0.0333834 Jy ! Component: 1700 - total flux cleaned = 0.0335914 Jy ! Component: 1750 - total flux cleaned = 0.0337441 Jy ! Component: 1800 - total flux cleaned = 0.0339932 Jy ! Component: 1850 - total flux cleaned = 0.0342842 Jy ! Component: 1900 - total flux cleaned = 0.0346173 Jy ! Component: 1950 - total flux cleaned = 0.0348971 Jy ! Component: 2000 - total flux cleaned = 0.0351702 Jy ! Total flux subtracted in 2048 components = 0.0353034 Jy ! Clean residual min=-0.002864 max=0.003085 Jy/beam ! Clean residual mean=0.000001 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.821678 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 349 components and 0.821678 Jy ![Exited script file: muppet] wmap "J1540+1447_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 7.726 at 6.471 degrees (North through East) ! Clean map min=-0.0080457 max=0.6528 Jy/beam ! Writing clean map to FITS file: J1540+1447_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.652796 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000978998 device "J1540+1447_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1540+1447_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.44991 0.44991 0.899821 1.79964 3.59928 7.19857 14.3971 28.7943 57.5885 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.652 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.322 x 7.726 at 6.471 degrees (North through East) ! Clean map min=-0.0080457 max=0.6528 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1540+1447_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1540+1447_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1540+1447_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:43:46 2006