! Started logfile: J1540+1447_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:41:46 2006 obs J1540+1447_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1540+1447_S_2006_02_14_yyk_uva.fits ! AN table 1: 322 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.536853 visibilities/baseline/integration-bin. ! Found source: J1540+1447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 31116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1540+1447_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.709524 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.64 mas, bpa=4.836 degrees ! Estimated noise=1.90658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.58371 Jy ! Component: 100 - total flux cleaned = 0.699401 Jy ! Total flux subtracted in 100 components = 0.699401 Jy ! Clean residual min=-0.023095 max=0.032699 Jy/beam ! Clean residual mean=0.000036 rms=0.007575 Jy/beam ! Combined flux in latest and established models = 0.699401 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.699401 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.135737Jy sigma=2.140526 ! Fit after self-cal, rms=0.135039Jy sigma=2.128891 ! Inverting map and beam ! Estimated beam: bmin=2.477 mas, bmaj=6.64 mas, bpa=4.836 degrees ! Estimated noise=1.90658 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.11 mas, bpa=2.448 degrees ! Estimated noise=1.4405 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0355566 Jy ! Component: 100 - total flux cleaned = 0.0549247 Jy ! Component: 150 - total flux cleaned = 0.0669219 Jy ! Component: 200 - total flux cleaned = 0.0727852 Jy ! Total flux subtracted in 200 components = 0.0727852 Jy ! Clean residual min=-0.020113 max=0.023551 Jy/beam ! Clean residual mean=0.000022 rms=0.005901 Jy/beam ! Combined flux in latest and established models = 0.772186 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 44 components and 0.772186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122759Jy sigma=1.966468 ! Fit after self-cal, rms=0.122690Jy sigma=1.964272 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 7.11 at 2.448 degrees (North through East) ! Clean map min=-0.020162 max=0.66376 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.99 KP 0.95 ! LA 1.19 MK 0.92 NL 0.93 OV 1.02 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996809 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.99 KP 0.98 ! LA 1.15 MK 1.02 NL 0.95 OV 1.01 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.975334 ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 0.98 HN 1.01 KP 1.00 ! LA 0.92 MK 1.11 NL 1.04 OV 1.05 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03628 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 0.94 KP 0.90 ! LA 0.78 MK 1.12 NL 0.96 OV 0.90 ! PT 1.00* SC 1.11 ! ! ! Fit before self-cal, rms=0.122690Jy sigma=1.964272 ! Fit after self-cal, rms=0.090594Jy sigma=1.355657 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090594Jy sigma=1.355657 ! Fit after self-cal, rms=0.090639Jy sigma=1.355436 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=7.226 mas, bpa=2.738 degrees ! Estimated noise=1.45089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655955 Jy ! Component: 100 - total flux cleaned = 0.00672085 Jy ! Component: 150 - total flux cleaned = 0.00659439 Jy ! Component: 200 - total flux cleaned = 0.00668799 Jy ! Total flux subtracted in 200 components = 0.00668799 Jy ! Clean residual min=-0.011034 max=0.017622 Jy/beam ! Clean residual mean=0.000043 rms=0.003562 Jy/beam ! Combined flux in latest and established models = 0.778874 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 0.778874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089811Jy sigma=1.344358 ! Fit after self-cal, rms=0.089735Jy sigma=1.342663 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089735Jy sigma=1.342663 ! Fit after self-cal, rms=0.085567Jy sigma=1.273930 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196712 Jy ! Component: 100 - total flux cleaned = 0.0251736 Jy ! Component: 150 - total flux cleaned = 0.0276698 Jy ! Component: 200 - total flux cleaned = 0.0291177 Jy ! Total flux subtracted in 200 components = 0.0291177 Jy ! Clean residual min=-0.007252 max=0.008264 Jy/beam ! Clean residual mean=0.000033 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.807992 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 82 components and 0.807992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083005Jy sigma=1.197895 ! Fit after self-cal, rms=0.082397Jy sigma=1.189516 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.978 x 7.226 at 2.738 degrees (North through East) ! Clean map min=-0.0070483 max=0.67327 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082397Jy sigma=1.189516 ! Fit after self-cal, rms=0.075941Jy sigma=1.039560 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075941Jy sigma=1.039560 ! Fit after self-cal, rms=0.075946Jy sigma=1.038734 ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.206 mas, bpa=2.809 degrees ! Estimated noise=1.44626 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579799 Jy ! Component: 100 - total flux cleaned = 0.00789856 Jy ! Component: 150 - total flux cleaned = 0.00843362 Jy ! Component: 200 - total flux cleaned = 0.00843854 Jy ! Total flux subtracted in 200 components = 0.00843854 Jy ! Clean residual min=-0.005966 max=0.007364 Jy/beam ! Clean residual mean=0.000035 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.81643 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 110 components and 0.81643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075739Jy sigma=1.029058 ! Fit after self-cal, rms=0.075758Jy sigma=1.027912 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075758Jy sigma=1.027912 ! Fit after self-cal, rms=0.073302Jy sigma=0.985029 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073302Jy sigma=0.985029 ! Fit after self-cal, rms=0.073362Jy sigma=0.984972 ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.208 mas, bpa=2.802 degrees ! Estimated noise=1.44623 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321667 Jy ! Component: 100 - total flux cleaned = 0.00410712 Jy ! Component: 150 - total flux cleaned = 0.00403246 Jy ! Component: 200 - total flux cleaned = 0.00416224 Jy ! Total flux subtracted in 200 components = 0.00416224 Jy ! Clean residual min=-0.005956 max=0.006737 Jy/beam ! Clean residual mean=0.000032 rms=0.001859 Jy/beam ! Combined flux in latest and established models = 0.820593 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.820593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073246Jy sigma=0.981100 ! Fit after self-cal, rms=0.073267Jy sigma=0.980660 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.391 mas, bmaj=9.926 mas, bpa=-1.166 degrees ! Estimated noise=1.92021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185131 Jy ! Component: 100 - total flux cleaned = 0.0019573 Jy ! Component: 150 - total flux cleaned = 0.00203194 Jy ! Component: 200 - total flux cleaned = 0.00210171 Jy ! Total flux subtracted in 200 components = 0.00210171 Jy ! Clean residual min=-0.008568 max=0.009528 Jy/beam ! Clean residual mean=0.000086 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 0.822694 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 138 components and 0.822694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073250Jy sigma=0.981105 ! Fit after self-cal, rms=0.073279Jy sigma=0.980598 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.695 mas, bpa=4.686 degrees ! Estimated noise=1.8994 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.58077 Jy ! Component: 100 - total flux cleaned = 0.692667 Jy ! Component: 150 - total flux cleaned = 0.731131 Jy ! Component: 200 - total flux cleaned = 0.752022 Jy ! Total flux subtracted in 200 components = 0.752022 Jy ! Clean residual min=-0.009763 max=0.010656 Jy/beam ! Clean residual mean=0.000040 rms=0.002945 Jy/beam ! Combined flux in latest and established models = 0.752022 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.752022 Jy ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.208 mas, bpa=2.802 degrees ! Estimated noise=1.44623 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194752 Jy ! Component: 100 - total flux cleaned = 0.0323737 Jy ! Component: 150 - total flux cleaned = 0.0406973 Jy ! Component: 200 - total flux cleaned = 0.0463943 Jy ! Total flux subtracted in 200 components = 0.0463943 Jy ! Clean residual min=-0.007147 max=0.007789 Jy/beam ! Clean residual mean=0.000036 rms=0.002067 Jy/beam ! Combined flux in latest and established models = 0.798416 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 79 components and 0.798416 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.391 mas, bmaj=9.926 mas, bpa=-1.166 degrees ! Estimated noise=1.92021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978482 Jy ! Component: 100 - total flux cleaned = 0.0143609 Jy ! Component: 150 - total flux cleaned = 0.0165963 Jy ! Component: 200 - total flux cleaned = 0.0181973 Jy ! Total flux subtracted in 200 components = 0.0181973 Jy ! Clean residual min=-0.008459 max=0.009676 Jy/beam ! Clean residual mean=0.000090 rms=0.003248 Jy/beam ! Combined flux in latest and established models = 0.816613 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 125 components and 0.816613 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=7.208 mas, bpa=2.802 degrees ! Estimated noise=1.44623 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024082 Jy ! Component: 100 - total flux cleaned = 0.0041904 Jy ! Component: 150 - total flux cleaned = 0.00534862 Jy ! Component: 200 - total flux cleaned = 0.00551922 Jy ! Total flux subtracted in 200 components = 0.00551922 Jy ! Clean residual min=-0.006525 max=0.006683 Jy/beam ! Clean residual mean=0.000032 rms=0.001810 Jy/beam ! Combined flux in latest and established models = 0.822132 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 147 components and 0.822132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073327Jy sigma=0.979721 ! Fit after self-cal, rms=0.073264Jy sigma=0.978482 wmodel J1540+1447_S_2006_02_14_yyk\_map.mod ! Writing 147 model components to file: J1540+1447_S_2006_02_14_yyk_map.mod wobs J1540+1447_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1540+1447_S_2006_02_14_yyk_uvs.fits wwins J1540+1447_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1540+1447_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111897 Jy ! Component: 100 - total flux cleaned = 0.00163698 Jy ! Component: 150 - total flux cleaned = 0.00230422 Jy ! Component: 200 - total flux cleaned = 0.00292068 Jy ! Component: 250 - total flux cleaned = 0.0036665 Jy ! Component: 300 - total flux cleaned = 0.00437374 Jy ! Component: 350 - total flux cleaned = 0.00482373 Jy ! Component: 400 - total flux cleaned = 0.0053267 Jy ! Component: 450 - total flux cleaned = 0.00580612 Jy ! Component: 500 - total flux cleaned = 0.00626747 Jy ! Component: 550 - total flux cleaned = 0.0065855 Jy ! Component: 600 - total flux cleaned = 0.00701429 Jy ! Component: 650 - total flux cleaned = 0.00730819 Jy ! Component: 700 - total flux cleaned = 0.00759283 Jy ! Component: 750 - total flux cleaned = 0.00786847 Jy ! Component: 800 - total flux cleaned = 0.00813527 Jy ! Component: 850 - total flux cleaned = 0.00844559 Jy ! Component: 900 - total flux cleaned = 0.0087967 Jy ! Component: 950 - total flux cleaned = 0.00908941 Jy ! Component: 1000 - total flux cleaned = 0.00937232 Jy ! Component: 1050 - total flux cleaned = 0.00969391 Jy ! Component: 1100 - total flux cleaned = 0.00991982 Jy ! Component: 1150 - total flux cleaned = 0.0101834 Jy ! Component: 1200 - total flux cleaned = 0.0104399 Jy ! Component: 1250 - total flux cleaned = 0.0106491 Jy ! Component: 1300 - total flux cleaned = 0.010894 Jy ! Component: 1350 - total flux cleaned = 0.011093 Jy ! Component: 1400 - total flux cleaned = 0.0113257 Jy ! Component: 1450 - total flux cleaned = 0.0114383 Jy ! Component: 1500 - total flux cleaned = 0.0115867 Jy ! Component: 1550 - total flux cleaned = 0.0117692 Jy ! Component: 1600 - total flux cleaned = 0.0119122 Jy ! Component: 1650 - total flux cleaned = 0.0121573 Jy ! Component: 1700 - total flux cleaned = 0.0122264 Jy ! Component: 1750 - total flux cleaned = 0.0124289 Jy ! Component: 1800 - total flux cleaned = 0.0125278 Jy ! Component: 1850 - total flux cleaned = 0.0126901 Jy ! Component: 1900 - total flux cleaned = 0.012786 Jy ! Component: 1950 - total flux cleaned = 0.0128806 Jy ! Component: 2000 - total flux cleaned = 0.0129431 Jy ! Total flux subtracted in 2048 components = 0.0130651 Jy ! Clean residual min=-0.002215 max=0.002302 Jy/beam ! Clean residual mean=0.000008 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.835198 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 291 components and 0.835197 Jy ![Exited script file: muppet] wmap "J1540+1447_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 7.208 at 2.802 degrees (North through East) ! Clean map min=-0.0048086 max=0.67564 Jy/beam ! Writing clean map to FITS file: J1540+1447_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.675638 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000576106 device "J1540+1447_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1540+1447_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.255805 0.255805 0.51161 1.02322 2.04644 4.09288 8.18576 16.3715 32.7431 65.4861 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.675 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.974 x 7.208 at 2.802 degrees (North through East) ! Clean map min=-0.0048086 max=0.67564 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1540+1447_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1540+1447_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1540+1447_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:42:17 2006