! Started logfile: J1539+7814_S_2006_02_23_yyk_uvs.log on Wed Jul  5 12:41:02 2006
obs J1539+7814_S_2006_02_23_yyk_uva.fits
! Reading UV FITS file: J1539+7814_S_2006_02_23_yyk_uva.fits
! AN table 1: 862 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.222196 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1539+7814
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2426 lines of history.
! 
! Reading 34476 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1539+7814_S_2006_02_23_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.0671246 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.3 mas, bmaj=51.52 mas, bpa=27.17 degrees
! Estimated noise=0.823834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149721 Jy
! Component: 100  -  total flux cleaned = 0.0256979 Jy
! Total flux subtracted in 100 components = 0.0256979 Jy
! Clean residual min=-0.003616 max=0.004719 Jy/beam
! Clean residual mean=0.000262 rms=0.002029 Jy/beam
! Combined flux in latest and established models = 0.0256979 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 49 components and 0.0256979 Jy
! 
! Correcting IF 1.
!  A total of 80 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 160 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 112 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.054667Jy  sigma=1.143607
! Fit after  self-cal, rms=0.053481Jy  sigma=1.130015
! Inverting map and beam 
! Estimated beam: bmin=10.3 mas, bmaj=51.2 mas, bpa=27.15 degrees
! Estimated noise=0.827094 mJy/beam.
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.311 mas, bmaj=58.06 mas, bpa=25.27 degrees
! Estimated noise=0.575976 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262403 Jy
! Component: 100  -  total flux cleaned = 0.0045355 Jy
! Component: 150  -  total flux cleaned = 0.00544515 Jy
! Component: 200  -  total flux cleaned = 0.00641699 Jy
! Total flux subtracted in 200 components = 0.00641699 Jy
! Clean residual min=-0.001138 max=0.001129 Jy/beam
! Clean residual mean=0.000007 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0321149 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 101 model components to the UV plane model.
! The established model now contains 149 components and 0.0321149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050984Jy  sigma=1.065925
! Fit after  self-cal, rms=0.050917Jy  sigma=1.064510
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.311 x 58.06 at 25.27 degrees (North through East)
! Clean map  min=-0.0014295  max=0.012882 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.050917Jy  sigma=1.064510
! Fit after  self-cal, rms=0.044363Jy  sigma=1.056345
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044363Jy  sigma=1.056345
! Fit after  self-cal, rms=0.044375Jy  sigma=1.056183
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.272 mas, bmaj=58.25 mas, bpa=25.3 degrees
! Estimated noise=0.579276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116373 Jy
! Component: 100  -  total flux cleaned = 0.00249078 Jy
! Component: 150  -  total flux cleaned = 0.00380447 Jy
! Component: 200  -  total flux cleaned = 0.00518225 Jy
! Total flux subtracted in 200 components = 0.00518225 Jy
! Clean residual min=-0.000601 max=0.000725 Jy/beam
! Clean residual mean=0.000013 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0372971 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 64 model components to the UV plane model.
! The established model now contains 205 components and 0.0372971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043169Jy  sigma=1.026931
! Fit after  self-cal, rms=0.043171Jy  sigma=1.026737
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043171Jy  sigma=1.026737
! Fit after  self-cal, rms=0.040901Jy  sigma=0.959610
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000415126 Jy
! Component: 100  -  total flux cleaned = 0.00143598 Jy
! Component: 150  -  total flux cleaned = 0.00241254 Jy
! Component: 200  -  total flux cleaned = 0.00344789 Jy
! Total flux subtracted in 200 components = 0.00344789 Jy
! Clean residual min=-0.000602 max=0.000626 Jy/beam
! Clean residual mean=0.000009 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.040745 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 111 model components to the UV plane model.
! The established model now contains 309 components and 0.040745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039694Jy  sigma=0.927313
! Fit after  self-cal, rms=0.039878Jy  sigma=0.918737
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.272 x 58.25 at 25.3 degrees (North through East)
! Clean map  min=-0.0016263  max=0.016156 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.476 mas, bmaj=56.98 mas, bpa=25.32 degrees
! Estimated noise=0.581402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612696 Jy
! Component: 100  -  total flux cleaned = 0.00158316 Jy
! Component: 150  -  total flux cleaned = 0.00261293 Jy
! Component: 200  -  total flux cleaned = 0.00368827 Jy
! Total flux subtracted in 200 components = 0.00368827 Jy
! Clean residual min=-0.000546 max=0.000572 Jy/beam
! Clean residual mean=0.000009 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.0444333 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 77 model components to the UV plane model.
! The established model now contains 367 components and 0.0444333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039046Jy  sigma=0.897376
! Fit after  self-cal, rms=0.039155Jy  sigma=0.896156
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.3 mas, bmaj=50.78 mas, bpa=27.48 degrees
! Estimated noise=0.825738 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159368 Jy
! Component: 100  -  total flux cleaned = 0.0278731 Jy
! Component: 150  -  total flux cleaned = 0.0354171 Jy
! Component: 200  -  total flux cleaned = 0.0375787 Jy
! Total flux subtracted in 200 components = 0.0375787 Jy
! Clean residual min=-0.005816 max=0.005698 Jy/beam
! Clean residual mean=0.000148 rms=0.001967 Jy/beam
! Combined flux in latest and established models = 0.0375787 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 87 model components to the UV plane model.
! The established model now contains 87 components and 0.0375787 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.272 mas, bmaj=58.25 mas, bpa=25.3 degrees
! Estimated noise=0.579276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000989499 Jy
! Component: 100  -  total flux cleaned = -0.000825849 Jy
! Component: 150  -  total flux cleaned = -0.00153105 Jy
! Component: 200  -  total flux cleaned = -0.00163839 Jy
! Total flux subtracted in 200 components = -0.00163839 Jy
! Clean residual min=-0.001291 max=0.001254 Jy/beam
! Clean residual mean=0.000004 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.0359403 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 137 components and 0.0359403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.476 mas, bmaj=56.98 mas, bpa=25.32 degrees
! Estimated noise=0.581402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00059902 Jy
! Component: 100  -  total flux cleaned = 0.000730952 Jy
! Component: 150  -  total flux cleaned = 0.000662629 Jy
! Component: 200  -  total flux cleaned = 0.000816359 Jy
! Total flux subtracted in 200 components = 0.000816359 Jy
! Clean residual min=-0.001054 max=0.001054 Jy/beam
! Clean residual mean=0.000024 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0367566 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 162 components and 0.0367566 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.272 mas, bmaj=58.25 mas, bpa=25.3 degrees
! Estimated noise=0.579276 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -7.22696e-05 Jy
! Component: 100  -  total flux cleaned = 0.000199717 Jy
! Component: 150  -  total flux cleaned = 0.000530746 Jy
! Component: 200  -  total flux cleaned = 0.000529141 Jy
! Total flux subtracted in 200 components = 0.000529141 Jy
! Clean residual min=-0.000424 max=0.000422 Jy/beam
! Clean residual mean=0.000010 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0372858 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 205 components and 0.0372858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038794Jy  sigma=0.899447
! Fit after  self-cal, rms=0.038900Jy  sigma=0.896972
wmodel J1539+7814_S_2006_02_23_yyk\_map.mod
! Writing 205 model components to file: J1539+7814_S_2006_02_23_yyk_map.mod
wobs J1539+7814_S_2006_02_23_yyk\_uvs.fits
! Writing UV FITS file: J1539+7814_S_2006_02_23_yyk_uvs.fits
wwins J1539+7814_S_2006_02_23_yyk\_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J1539+7814_S_2006_02_23_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.272 x 58.25 at 25.3 degrees (North through East)
! Clean map  min=-0.0027046  max=0.01496 Jy/beam
! Writing clean map to FITS file: J1539+7814_S_2006_02_23_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0149597 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000225056 
device "J1539+7814_S_2006_02_23_yyk\_map.eps/VPS"
! Attempting to open device: 'J1539+7814_S_2006_02_23_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.51324 4.51324 9.02649 18.053 36.106 72.2119
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.014 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.272 x 58.25 at 25.3 degrees (North through East)
! Clean map  min=-0.0027046  max=0.01496 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1539+7814_S_2006_02_23_yyk\_map.gif/gif"
! Attempting to open device: 'J1539+7814_S_2006_02_23_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1539+7814_S_2006_02_23_yyk_uvs.log closed on Wed Jul  5 12:41:45 2006