! Started logfile: J1435+7605_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:36:57 2006 obs J1435+7605_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1435+7605_S_2006_02_14_yyk_uva.fits ! AN table 1: 864 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.781584 visibilities/baseline/integration-bin. ! Found source: J1435+7605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2686 lines of history. ! ! Reading 121552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1435+7605_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.328366 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.347 mas, bmaj=10.02 mas, bpa=-2.066 degrees ! Estimated noise=1.37805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.16275 Jy ! Component: 100 - total flux cleaned = 0.238514 Jy ! Total flux subtracted in 100 components = 0.238514 Jy ! Clean residual min=-0.034957 max=0.060634 Jy/beam ! Clean residual mean=-0.000903 rms=0.014197 Jy/beam ! Combined flux in latest and established models = 0.238514 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.238514 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.220185Jy sigma=4.189626 ! Fit after self-cal, rms=0.218683Jy sigma=4.150706 ! Inverting map and beam ! Estimated beam: bmin=2.347 mas, bmaj=10.02 mas, bpa=-2.066 degrees ! Estimated noise=1.37805 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.901 mas, bmaj=10.07 mas, bpa=-2.066 degrees ! Estimated noise=0.772195 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111844 Jy ! Component: 100 - total flux cleaned = 0.183962 Jy ! Component: 150 - total flux cleaned = 0.23397 Jy ! Component: 200 - total flux cleaned = 0.269635 Jy ! Total flux subtracted in 200 components = 0.269635 Jy ! Clean residual min=-0.038653 max=0.082657 Jy/beam ! Clean residual mean=-0.000532 rms=0.015987 Jy/beam ! Combined flux in latest and established models = 0.508149 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 70 components and 0.508149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162856Jy sigma=3.051692 ! Fit after self-cal, rms=0.162152Jy sigma=3.025936 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.901 x 10.07 at -2.066 degrees (North through East) ! Clean map min=-0.037026 max=0.23891 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.846082 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.75 HN 0.89 KP 0.79 ! LA 0.98 MK 1.36 NL 3.25 OV 0.87 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.85557 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.78 HN 0.85 KP 0.82 ! LA 0.95 MK 1.47 NL 2.99 OV 0.89 ! PT 1.00* SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.853902 ! Telescope amplitude corrections in sub-array 1: ! BR 1.38 FD 0.81 HN 0.85 KP 0.83 ! LA 0.80 MK 1.65 NL 2.41 OV 0.94 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.90202 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.83 HN 0.77 KP 0.74 ! LA 0.68 MK 1.76 NL 2.34 OV 0.80 ! PT 1.00* SC 1.13 ! ! ! Fit before self-cal, rms=0.162152Jy sigma=3.025936 ! Fit after self-cal, rms=0.147858Jy sigma=2.832106 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147858Jy sigma=2.832106 ! Fit after self-cal, rms=0.151145Jy sigma=2.807921 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.451 mas, bmaj=9.441 mas, bpa=-6.086 degrees ! Estimated noise=0.54535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0675699 Jy ! Component: 100 - total flux cleaned = -0.0979402 Jy ! Component: 150 - total flux cleaned = -0.114774 Jy ! Component: 200 - total flux cleaned = -0.124419 Jy ! Total flux subtracted in 200 components = -0.124419 Jy ! Clean residual min=-0.014179 max=0.018284 Jy/beam ! Clean residual mean=0.000146 rms=0.004613 Jy/beam ! Combined flux in latest and established models = 0.383729 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 90 components and 0.38373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133498Jy sigma=1.819442 ! Fit after self-cal, rms=0.133804Jy sigma=1.817289 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133804Jy sigma=1.817289 ! Fit after self-cal, rms=0.131362Jy sigma=1.752170 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00574782 Jy ! Component: 100 - total flux cleaned = -0.00806754 Jy ! Component: 150 - total flux cleaned = -0.00857229 Jy ! Component: 200 - total flux cleaned = -0.00899934 Jy ! Total flux subtracted in 200 components = -0.00899934 Jy ! Clean residual min=-0.014119 max=0.017278 Jy/beam ! Clean residual mean=0.000101 rms=0.004425 Jy/beam ! Combined flux in latest and established models = 0.37473 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.37473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131207Jy sigma=1.740599 ! Fit after self-cal, rms=0.131416Jy sigma=1.738060 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.451 x 9.441 at -6.086 degrees (North through East) ! Clean map min=-0.013887 max=0.18424 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131416Jy sigma=1.738060 ! Fit after self-cal, rms=0.142741Jy sigma=1.710592 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142741Jy sigma=1.710592 ! Fit after self-cal, rms=0.142784Jy sigma=1.710392 ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=9.49 mas, bpa=-6.276 degrees ! Estimated noise=0.551254 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118544 Jy ! Component: 100 - total flux cleaned = -0.00138346 Jy ! Component: 150 - total flux cleaned = -0.00146204 Jy ! Component: 200 - total flux cleaned = -0.00166277 Jy ! Total flux subtracted in 200 components = -0.00166277 Jy ! Clean residual min=-0.013565 max=0.017361 Jy/beam ! Clean residual mean=0.000104 rms=0.004339 Jy/beam ! Combined flux in latest and established models = 0.373067 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 104 components and 0.373067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142832Jy sigma=1.705119 ! Fit after self-cal, rms=0.143139Jy sigma=1.704677 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143139Jy sigma=1.704677 ! Fit after self-cal, rms=0.146526Jy sigma=1.683118 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146526Jy sigma=1.683118 ! Fit after self-cal, rms=0.146555Jy sigma=1.683082 ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.495 mas, bpa=-6.576 degrees ! Estimated noise=0.554274 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000515233 Jy ! Component: 100 - total flux cleaned = -0.000588616 Jy ! Component: 150 - total flux cleaned = -0.000721776 Jy ! Component: 200 - total flux cleaned = -0.000838807 Jy ! Total flux subtracted in 200 components = -0.000838807 Jy ! Clean residual min=-0.013295 max=0.017513 Jy/beam ! Clean residual mean=0.000106 rms=0.004290 Jy/beam ! Combined flux in latest and established models = 0.372229 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 112 components and 0.372229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146490Jy sigma=1.679886 ! Fit after self-cal, rms=0.146665Jy sigma=1.679719 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.892 mas, bmaj=11.25 mas, bpa=6.264 degrees ! Estimated noise=0.692884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124616 Jy ! Component: 100 - total flux cleaned = 0.000846109 Jy ! Component: 150 - total flux cleaned = 0.000527955 Jy ! Component: 200 - total flux cleaned = 0.000337065 Jy ! Total flux subtracted in 200 components = 0.000337065 Jy ! Clean residual min=-0.018759 max=0.020358 Jy/beam ! Clean residual mean=0.000200 rms=0.006571 Jy/beam ! Combined flux in latest and established models = 0.372566 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 116 components and 0.372566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147139Jy sigma=1.690014 ! Fit after self-cal, rms=0.146693Jy sigma=1.689159 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=9.225 mas, bpa=-3.913 degrees ! Estimated noise=1.12921 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.137618 Jy ! Component: 100 - total flux cleaned = 0.198855 Jy ! Component: 150 - total flux cleaned = 0.23911 Jy ! Component: 200 - total flux cleaned = 0.267454 Jy ! Total flux subtracted in 200 components = 0.267454 Jy ! Clean residual min=-0.018985 max=0.027547 Jy/beam ! Clean residual mean=-0.000253 rms=0.005885 Jy/beam ! Combined flux in latest and established models = 0.267454 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.267454 Jy ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.495 mas, bpa=-6.576 degrees ! Estimated noise=0.554274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458303 Jy ! Component: 100 - total flux cleaned = 0.0691089 Jy ! Component: 150 - total flux cleaned = 0.0821337 Jy ! Component: 200 - total flux cleaned = 0.0895916 Jy ! Total flux subtracted in 200 components = 0.0895916 Jy ! Clean residual min=-0.014021 max=0.016441 Jy/beam ! Clean residual mean=0.000027 rms=0.004418 Jy/beam ! Combined flux in latest and established models = 0.357046 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 90 components and 0.357046 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.892 mas, bmaj=11.25 mas, bpa=6.264 degrees ! Estimated noise=0.692884 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00912401 Jy ! Component: 100 - total flux cleaned = 0.00965302 Jy ! Component: 150 - total flux cleaned = 0.0100638 Jy ! Component: 200 - total flux cleaned = 0.0103921 Jy ! Total flux subtracted in 200 components = 0.0103921 Jy ! Clean residual min=-0.018994 max=0.020368 Jy/beam ! Clean residual mean=0.000149 rms=0.006616 Jy/beam ! Combined flux in latest and established models = 0.367438 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 98 components and 0.367438 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=9.495 mas, bpa=-6.576 degrees ! Estimated noise=0.554274 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00314844 Jy ! Component: 100 - total flux cleaned = -0.0031824 Jy ! Component: 150 - total flux cleaned = -0.00295627 Jy ! Component: 200 - total flux cleaned = -0.00279355 Jy ! Total flux subtracted in 200 components = -0.00279355 Jy ! Clean residual min=-0.013416 max=0.017625 Jy/beam ! Clean residual mean=0.000063 rms=0.004293 Jy/beam ! Combined flux in latest and established models = 0.364645 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.364645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148187Jy sigma=1.693043 ! Fit after self-cal, rms=0.148408Jy sigma=1.690272 wmodel J1435+7605_S_2006_02_14_yyk\_map.mod ! Writing 113 model components to file: J1435+7605_S_2006_02_14_yyk_map.mod wobs J1435+7605_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1435+7605_S_2006_02_14_yyk_uvs.fits wwins J1435+7605_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J1435+7605_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702364 Jy ! Component: 100 - total flux cleaned = 0.010261 Jy ! Component: 150 - total flux cleaned = 0.0125513 Jy ! Component: 200 - total flux cleaned = 0.0144414 Jy ! Component: 250 - total flux cleaned = 0.0163749 Jy ! Component: 300 - total flux cleaned = 0.017528 Jy ! Component: 350 - total flux cleaned = 0.0190721 Jy ! Component: 400 - total flux cleaned = 0.0204013 Jy ! Component: 450 - total flux cleaned = 0.0213869 Jy ! Component: 500 - total flux cleaned = 0.0223276 Jy ! Component: 550 - total flux cleaned = 0.0233595 Jy ! Component: 600 - total flux cleaned = 0.0239778 Jy ! Component: 650 - total flux cleaned = 0.0246958 Jy ! Component: 700 - total flux cleaned = 0.0253898 Jy ! Component: 750 - total flux cleaned = 0.0258392 Jy ! Component: 800 - total flux cleaned = 0.0262757 Jy ! Component: 850 - total flux cleaned = 0.0263816 Jy ! Component: 900 - total flux cleaned = 0.0265895 Jy ! Component: 950 - total flux cleaned = 0.0265914 Jy ! Component: 1000 - total flux cleaned = 0.0265927 Jy ! Component: 1050 - total flux cleaned = 0.0264971 Jy ! Component: 1100 - total flux cleaned = 0.0266887 Jy ! Component: 1150 - total flux cleaned = 0.0270597 Jy ! Component: 1200 - total flux cleaned = 0.0270594 Jy ! Component: 1250 - total flux cleaned = 0.0272397 Jy ! Component: 1300 - total flux cleaned = 0.0273277 Jy ! Component: 1350 - total flux cleaned = 0.0275008 Jy ! Component: 1400 - total flux cleaned = 0.0277582 Jy ! Component: 1450 - total flux cleaned = 0.0279264 Jy ! Component: 1500 - total flux cleaned = 0.02801 Jy ! Component: 1550 - total flux cleaned = 0.028257 Jy ! Component: 1600 - total flux cleaned = 0.0283391 Jy ! Component: 1650 - total flux cleaned = 0.0285784 Jy ! Component: 1700 - total flux cleaned = 0.0285784 Jy ! Component: 1750 - total flux cleaned = 0.0285007 Jy ! Component: 1800 - total flux cleaned = 0.0283469 Jy ! Component: 1850 - total flux cleaned = 0.0281965 Jy ! Component: 1900 - total flux cleaned = 0.0280471 Jy ! Component: 1950 - total flux cleaned = 0.027899 Jy ! Component: 2000 - total flux cleaned = 0.0276063 Jy ! Total flux subtracted in 2048 components = 0.0274612 Jy ! Clean residual min=-0.003680 max=0.003929 Jy/beam ! Clean residual mean=0.000012 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 0.392106 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 259 components and 0.392106 Jy ![Exited script file: muppet] wmap "J1435+7605_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 9.495 at -6.576 degrees (North through East) ! Clean map min=-0.0091955 max=0.18305 Jy/beam ! Writing clean map to FITS file: J1435+7605_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.183052 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00147749 device "J1435+7605_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1435+7605_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.42144 2.42144 4.84287 9.68575 19.3715 38.743 77.486 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0044 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 9.495 at -6.576 degrees (North through East) ! Clean map min=-0.0091955 max=0.18305 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1435+7605_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1435+7605_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1435+7605_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:37:20 2006