! Started logfile: J1406+7828_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:35:31 2006 obs J1406+7828_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1406+7828_S_2006_02_23_yyk_uva.fits ! AN table 1: 884 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.995349 visibilities/baseline/integration-bin. ! Found source: J1406+7828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2429 lines of history. ! ! Reading 158380 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1406+7828_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.133749 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=10.43 mas, bpa=5.077 degrees ! Estimated noise=1.43079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0945924 Jy ! Component: 100 - total flux cleaned = 0.12495 Jy ! Total flux subtracted in 100 components = 0.12495 Jy ! Clean residual min=-0.006717 max=0.009012 Jy/beam ! Clean residual mean=0.000030 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.12495 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.12495 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.061900Jy sigma=1.072983 ! Fit after self-cal, rms=0.061861Jy sigma=1.071972 ! Inverting map and beam ! Estimated beam: bmin=2.39 mas, bmaj=10.43 mas, bpa=5.077 degrees ! Estimated noise=1.43079 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=10.73 mas, bpa=5.384 degrees ! Estimated noise=0.691068 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.013779 Jy ! Component: 100 - total flux cleaned = 0.0182556 Jy ! Component: 150 - total flux cleaned = 0.018881 Jy ! Component: 200 - total flux cleaned = 0.0193934 Jy ! Total flux subtracted in 200 components = 0.0193934 Jy ! Clean residual min=-0.003765 max=0.003492 Jy/beam ! Clean residual mean=-0.000020 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.144343 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 49 components and 0.144343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059524Jy sigma=1.031459 ! Fit after self-cal, rms=0.059519Jy sigma=1.031429 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 10.73 at 5.384 degrees (North through East) ! Clean map min=-0.0035847 max=0.11021 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02432 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 HN 0.99 KP 0.94 ! LA 1.17 MK 0.85 NL 0.88 OV 0.99 ! PT 1.09 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.98883 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.98 KP 0.99 ! LA 1.15 MK 0.99 NL 0.92 OV 0.99 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.95823 ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.04 HN 1.07 KP 1.01 ! LA 0.92 MK 1.10 NL 1.02 OV 1.03 ! PT 1.07 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.059519Jy sigma=1.031429 ! Fit after self-cal, rms=0.058795Jy sigma=1.016681 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058795Jy sigma=1.016681 ! Fit after self-cal, rms=0.058795Jy sigma=1.016668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.11 mas, bmaj=10.71 mas, bpa=5.402 degrees ! Estimated noise=0.689531 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144799 Jy ! Component: 100 - total flux cleaned = 0.00226132 Jy ! Component: 150 - total flux cleaned = 0.00267904 Jy ! Component: 200 - total flux cleaned = 0.00281701 Jy ! Total flux subtracted in 200 components = 0.00281701 Jy ! Clean residual min=-0.002263 max=0.002197 Jy/beam ! Clean residual mean=0.000021 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.14716 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 67 components and 0.14716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058742Jy sigma=1.016076 ! Fit after self-cal, rms=0.058740Jy sigma=1.016059 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058740Jy sigma=1.016059 ! Fit after self-cal, rms=0.055973Jy sigma=0.964531 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115521 Jy ! Component: 100 - total flux cleaned = 0.00137203 Jy ! Component: 150 - total flux cleaned = 0.00144203 Jy ! Component: 200 - total flux cleaned = 0.00147536 Jy ! Total flux subtracted in 200 components = 0.00147536 Jy ! Clean residual min=-0.002365 max=0.002287 Jy/beam ! Clean residual mean=0.000019 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.148635 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 79 components and 0.148635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055920Jy sigma=0.964167 ! Fit after self-cal, rms=0.055807Jy sigma=0.961769 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.11 x 10.71 at 5.402 degrees (North through East) ! Clean map min=-0.0022846 max=0.11141 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055807Jy sigma=0.961769 ! Fit after self-cal, rms=0.056026Jy sigma=0.953671 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056026Jy sigma=0.953671 ! Fit after self-cal, rms=0.056020Jy sigma=0.953469 ! Inverting map and beam ! Estimated beam: bmin=3.082 mas, bmaj=10.72 mas, bpa=5.431 degrees ! Estimated noise=0.701201 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260531 Jy ! Component: 100 - total flux cleaned = 0.00355093 Jy ! Component: 150 - total flux cleaned = 0.00407924 Jy ! Component: 200 - total flux cleaned = 0.0043644 Jy ! Total flux subtracted in 200 components = 0.0043644 Jy ! Clean residual min=-0.002440 max=0.002302 Jy/beam ! Clean residual mean=0.000019 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.153 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055888Jy sigma=0.951804 ! Fit after self-cal, rms=0.055889Jy sigma=0.951780 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055889Jy sigma=0.951780 ! Fit after self-cal, rms=0.056393Jy sigma=0.946705 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056393Jy sigma=0.946705 ! Fit after self-cal, rms=0.056403Jy sigma=0.946589 ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=10.74 mas, bpa=5.53 degrees ! Estimated noise=0.700512 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114004 Jy ! Component: 100 - total flux cleaned = 0.00173236 Jy ! Component: 150 - total flux cleaned = 0.00189369 Jy ! Component: 200 - total flux cleaned = 0.00199714 Jy ! Total flux subtracted in 200 components = 0.00199714 Jy ! Clean residual min=-0.002548 max=0.002358 Jy/beam ! Clean residual mean=0.000021 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.154997 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.154997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056372Jy sigma=0.946194 ! Fit after self-cal, rms=0.056375Jy sigma=0.946183 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.125 mas, bmaj=11.45 mas, bpa=4.949 degrees ! Estimated noise=0.897722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000870828 Jy ! Component: 100 - total flux cleaned = 0.00113586 Jy ! Component: 150 - total flux cleaned = 0.0011965 Jy ! Component: 200 - total flux cleaned = 0.00121837 Jy ! Total flux subtracted in 200 components = 0.00121837 Jy ! Clean residual min=-0.002694 max=0.002084 Jy/beam ! Clean residual mean=0.000039 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 0.156215 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 88 components and 0.156215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056375Jy sigma=0.946231 ! Fit after self-cal, rms=0.056375Jy sigma=0.946203 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=10.51 mas, bpa=5.21 degrees ! Estimated noise=1.42841 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0962804 Jy ! Component: 100 - total flux cleaned = 0.128049 Jy ! Component: 150 - total flux cleaned = 0.140993 Jy ! Component: 200 - total flux cleaned = 0.146963 Jy ! Total flux subtracted in 200 components = 0.146963 Jy ! Clean residual min=-0.004783 max=0.005091 Jy/beam ! Clean residual mean=0.000032 rms=0.001464 Jy/beam ! Combined flux in latest and established models = 0.146963 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.146963 Jy ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=10.74 mas, bpa=5.53 degrees ! Estimated noise=0.700512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00432375 Jy ! Component: 100 - total flux cleaned = 0.00593853 Jy ! Component: 150 - total flux cleaned = 0.00668586 Jy ! Component: 200 - total flux cleaned = 0.00711454 Jy ! Total flux subtracted in 200 components = 0.00711454 Jy ! Clean residual min=-0.002663 max=0.002323 Jy/beam ! Clean residual mean=0.000021 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.154078 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 47 components and 0.154078 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.125 mas, bmaj=11.45 mas, bpa=4.949 degrees ! Estimated noise=0.897722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013382 Jy ! Component: 100 - total flux cleaned = 0.00188415 Jy ! Component: 150 - total flux cleaned = 0.00195696 Jy ! Component: 200 - total flux cleaned = 0.00202231 Jy ! Total flux subtracted in 200 components = 0.00202231 Jy ! Clean residual min=-0.002704 max=0.002085 Jy/beam ! Clean residual mean=0.000039 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.1561 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.1561 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.043 mas, bmaj=10.74 mas, bpa=5.53 degrees ! Estimated noise=0.700512 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000384169 Jy ! Component: 100 - total flux cleaned = -0.000496022 Jy ! Component: 150 - total flux cleaned = -0.00062463 Jy ! Component: 200 - total flux cleaned = -0.000659798 Jy ! Total flux subtracted in 200 components = -0.000659798 Jy ! Clean residual min=-0.002526 max=0.002371 Jy/beam ! Clean residual mean=0.000020 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.15544 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.15544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056371Jy sigma=0.946165 ! Fit after self-cal, rms=0.056370Jy sigma=0.946156 wmodel J1406+7828_S_2006_02_23_yyk\_map.mod ! Writing 70 model components to file: J1406+7828_S_2006_02_23_yyk_map.mod wobs J1406+7828_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1406+7828_S_2006_02_23_yyk_uvs.fits wwins J1406+7828_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J1406+7828_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000739648 Jy ! Component: 100 - total flux cleaned = -0.000783288 Jy ! Component: 150 - total flux cleaned = -0.000670594 Jy ! Component: 200 - total flux cleaned = -0.000563821 Jy ! Component: 250 - total flux cleaned = -0.000462535 Jy ! Component: 300 - total flux cleaned = -0.000333497 Jy ! Component: 350 - total flux cleaned = -0.000302591 Jy ! Component: 400 - total flux cleaned = -0.000272425 Jy ! Component: 450 - total flux cleaned = -0.000214513 Jy ! Component: 500 - total flux cleaned = -0.000186822 Jy ! Component: 550 - total flux cleaned = -7.7154e-05 Jy ! Component: 600 - total flux cleaned = 2.9406e-05 Jy ! Component: 650 - total flux cleaned = 0.000159096 Jy ! Component: 700 - total flux cleaned = 0.000158185 Jy ! Component: 750 - total flux cleaned = 8.28023e-05 Jy ! Component: 800 - total flux cleaned = 8.31575e-05 Jy ! Component: 850 - total flux cleaned = 0.000154764 Jy ! Component: 900 - total flux cleaned = 0.00010719 Jy ! Component: 950 - total flux cleaned = 0.000129923 Jy ! Component: 1000 - total flux cleaned = 0.000129992 Jy ! Component: 1050 - total flux cleaned = 0.000129253 Jy ! Component: 1100 - total flux cleaned = 4.14295e-05 Jy ! Component: 1150 - total flux cleaned = 6.32146e-05 Jy ! Component: 1200 - total flux cleaned = 3.27709e-08 Jy ! Component: 1250 - total flux cleaned = 6.28962e-07 Jy ! Component: 1300 - total flux cleaned = -1.98259e-05 Jy ! Component: 1350 - total flux cleaned = 2.06776e-05 Jy ! Component: 1400 - total flux cleaned = -1.91383e-05 Jy ! Component: 1450 - total flux cleaned = 5.91025e-05 Jy ! Component: 1500 - total flux cleaned = 5.89595e-05 Jy ! Component: 1550 - total flux cleaned = 0.000116313 Jy ! Component: 1600 - total flux cleaned = 0.000172654 Jy ! Component: 1650 - total flux cleaned = 0.00026486 Jy ! Component: 1700 - total flux cleaned = 0.000264785 Jy ! Component: 1750 - total flux cleaned = 0.000300993 Jy ! Component: 1800 - total flux cleaned = 0.000354196 Jy ! Component: 1850 - total flux cleaned = 0.000319122 Jy ! Component: 1900 - total flux cleaned = 0.000388904 Jy ! Component: 1950 - total flux cleaned = 0.000457355 Jy ! Component: 2000 - total flux cleaned = 0.000490962 Jy ! Total flux subtracted in 2048 components = 0.000440742 Jy ! Clean residual min=-0.000930 max=0.001306 Jy/beam ! Clean residual mean=0.000013 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.155881 Jy keep ! Adding 166 model components to the UV plane model. ! The established model now contains 236 components and 0.155881 Jy ![Exited script file: muppet] wmap "J1406+7828_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.043 x 10.74 at 5.53 degrees (North through East) ! Clean map min=-0.0017891 max=0.113 Jy/beam ! Writing clean map to FITS file: J1406+7828_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.112999 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341813 device "J1406+7828_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1406+7828_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.907477 0.907477 1.81495 3.62991 7.25982 14.5196 29.0393 58.0785 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.112 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.043 x 10.74 at 5.53 degrees (North through East) ! Clean map min=-0.0017891 max=0.113 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1406+7828_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1406+7828_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1406+7828_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:35:54 2006