! Started logfile: J1357+7643_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:33:33 2006 obs J1357+7643_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1357+7643_S_2006_02_14_yyk_uva.fits ! AN table 1: 879 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992694 visibilities/baseline/integration-bin. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 157064 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1357+7643_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.614517 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.367 mas, bmaj=10.01 mas, bpa=4.468 degrees ! Estimated noise=1.29921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.512475 Jy ! Component: 100 - total flux cleaned = 0.592785 Jy ! Total flux subtracted in 100 components = 0.592785 Jy ! Clean residual min=-0.017971 max=0.021806 Jy/beam ! Clean residual mean=-0.000094 rms=0.004758 Jy/beam ! Combined flux in latest and established models = 0.592786 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.592786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111576Jy sigma=1.756545 ! Fit after self-cal, rms=0.111354Jy sigma=1.752919 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=10.38 mas, bpa=3.965 degrees ! Estimated noise=0.667667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.028205 Jy ! Component: 100 - total flux cleaned = 0.0373949 Jy ! Component: 150 - total flux cleaned = 0.0405645 Jy ! Component: 200 - total flux cleaned = 0.040662 Jy ! Total flux subtracted in 200 components = 0.040662 Jy ! Clean residual min=-0.010639 max=0.017001 Jy/beam ! Clean residual mean=-0.000234 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 0.633448 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.633448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104884Jy sigma=1.648266 ! Fit after self-cal, rms=0.104818Jy sigma=1.647716 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.136 x 10.38 at 3.965 degrees (North through East) ! Clean map min=-0.010364 max=0.59494 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0107 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 HN 0.99 KP 0.96 ! LA 1.21 MK 0.90 NL 0.95 OV 0.97 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985923 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.01 KP 0.99 ! LA 1.18 MK 0.99 NL 0.96 OV 0.99 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.985701 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.02 KP 0.98 ! LA 0.94 MK 1.08 NL 1.05 OV 1.01 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03041 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 0.95 KP 0.89 ! LA 0.81 MK 1.08 NL 0.97 OV 0.86 ! PT 0.94 SC 1.11 ! ! ! Fit before self-cal, rms=0.104818Jy sigma=1.647716 ! Fit after self-cal, rms=0.083803Jy sigma=1.243926 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083803Jy sigma=1.243926 ! Fit after self-cal, rms=0.083786Jy sigma=1.243845 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.179 mas, bmaj=10.34 mas, bpa=3.724 degrees ! Estimated noise=0.6682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260495 Jy ! Component: 100 - total flux cleaned = 0.00327516 Jy ! Component: 150 - total flux cleaned = 0.00347868 Jy ! Component: 200 - total flux cleaned = 0.00358279 Jy ! Total flux subtracted in 200 components = 0.00358279 Jy ! Clean residual min=-0.003313 max=0.003790 Jy/beam ! Clean residual mean=-0.000016 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.63703 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.637031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083586Jy sigma=1.240014 ! Fit after self-cal, rms=0.083560Jy sigma=1.239888 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083560Jy sigma=1.239888 ! Fit after self-cal, rms=0.074296Jy sigma=1.084772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000533747 Jy ! Component: 100 - total flux cleaned = 0.000664571 Jy ! Component: 150 - total flux cleaned = 0.000698129 Jy ! Component: 200 - total flux cleaned = 0.000668808 Jy ! Total flux subtracted in 200 components = 0.000668808 Jy ! Clean residual min=-0.003141 max=0.003909 Jy/beam ! Clean residual mean=-0.000015 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.637699 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.637699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074231Jy sigma=1.083945 ! Fit after self-cal, rms=0.073779Jy sigma=1.078317 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.179 x 10.34 at 3.724 degrees (North through East) ! Clean map min=-0.0030967 max=0.59974 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073779Jy sigma=1.078317 ! Fit after self-cal, rms=0.069829Jy sigma=0.991065 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069829Jy sigma=0.991065 ! Fit after self-cal, rms=0.069806Jy sigma=0.990300 ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=10.32 mas, bpa=3.639 degrees ! Estimated noise=0.667718 mJy/beam. ! Added new window around map position (-15.5, -16.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300089 Jy ! Component: 100 - total flux cleaned = 0.0032294 Jy ! Component: 150 - total flux cleaned = 0.00352911 Jy ! Component: 200 - total flux cleaned = 0.00352649 Jy ! Total flux subtracted in 200 components = 0.00352649 Jy ! Clean residual min=-0.002368 max=0.002365 Jy/beam ! Clean residual mean=-0.000021 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.641226 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 96 components and 0.641226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069518Jy sigma=0.984344 ! Fit after self-cal, rms=0.069537Jy sigma=0.984145 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069537Jy sigma=0.984145 ! Fit after self-cal, rms=0.067517Jy sigma=0.931391 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067517Jy sigma=0.931391 ! Fit after self-cal, rms=0.067534Jy sigma=0.931359 ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=10.31 mas, bpa=3.611 degrees ! Estimated noise=0.667384 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000359123 Jy ! Component: 100 - total flux cleaned = -0.000301033 Jy ! Component: 150 - total flux cleaned = -0.000297109 Jy ! Component: 200 - total flux cleaned = -0.000206373 Jy ! Total flux subtracted in 200 components = -0.000206373 Jy ! Clean residual min=-0.002104 max=0.002287 Jy/beam ! Clean residual mean=-0.000019 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.64102 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 123 components and 0.64102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067460Jy sigma=0.929885 ! Fit after self-cal, rms=0.067470Jy sigma=0.929867 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=11.35 mas, bpa=3.047 degrees ! Estimated noise=0.842155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991047 Jy ! Component: 100 - total flux cleaned = 0.000964393 Jy ! Component: 150 - total flux cleaned = 0.000890762 Jy ! Component: 200 - total flux cleaned = 0.000826352 Jy ! Total flux subtracted in 200 components = 0.000826352 Jy ! Clean residual min=-0.001622 max=0.002465 Jy/beam ! Clean residual mean=-0.000039 rms=0.000578 Jy/beam ! Combined flux in latest and established models = 0.641846 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 0.641846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067469Jy sigma=0.929794 ! Fit after self-cal, rms=0.067474Jy sigma=0.929647 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=9.989 mas, bpa=4.313 degrees ! Estimated noise=1.29035 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.510088 Jy ! Component: 100 - total flux cleaned = 0.587752 Jy ! Component: 150 - total flux cleaned = 0.615031 Jy ! Component: 200 - total flux cleaned = 0.62632 Jy ! Total flux subtracted in 200 components = 0.62632 Jy ! Clean residual min=-0.006887 max=0.006827 Jy/beam ! Clean residual mean=0.000046 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.62632 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.62632 Jy ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=10.31 mas, bpa=3.611 degrees ! Estimated noise=0.667384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -1.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00707388 Jy ! Component: 100 - total flux cleaned = 0.0105599 Jy ! Component: 150 - total flux cleaned = 0.0117281 Jy ! Component: 200 - total flux cleaned = 0.0123825 Jy ! Total flux subtracted in 200 components = 0.0123825 Jy ! Clean residual min=-0.002255 max=0.002168 Jy/beam ! Clean residual mean=-0.000016 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.638702 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 0.638702 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.323 mas, bmaj=11.35 mas, bpa=3.047 degrees ! Estimated noise=0.842155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132398 Jy ! Component: 100 - total flux cleaned = 0.00168341 Jy ! Component: 150 - total flux cleaned = 0.00163693 Jy ! Component: 200 - total flux cleaned = 0.00160222 Jy ! Total flux subtracted in 200 components = 0.00160222 Jy ! Clean residual min=-0.001664 max=0.002262 Jy/beam ! Clean residual mean=-0.000034 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.640305 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 104 components and 0.640304 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=10.31 mas, bpa=3.611 degrees ! Estimated noise=0.667384 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426319 Jy ! Component: 100 - total flux cleaned = -0.000664969 Jy ! Component: 150 - total flux cleaned = -0.000716846 Jy ! Component: 200 - total flux cleaned = -0.000715744 Jy ! Total flux subtracted in 200 components = -0.000715744 Jy ! Clean residual min=-0.001813 max=0.002159 Jy/beam ! Clean residual mean=-0.000018 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.639589 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 130 components and 0.639589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067344Jy sigma=0.927008 ! Fit after self-cal, rms=0.067344Jy sigma=0.926796 wmodel J1357+7643_S_2006_02_14_yyk\_map.mod ! Writing 130 model components to file: J1357+7643_S_2006_02_14_yyk_map.mod wobs J1357+7643_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1357+7643_S_2006_02_14_yyk_uvs.fits wwins J1357+7643_S_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J1357+7643_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040249 Jy ! Component: 100 - total flux cleaned = 0.000371739 Jy ! Component: 150 - total flux cleaned = 0.000342415 Jy ! Component: 200 - total flux cleaned = 0.000450856 Jy ! Component: 250 - total flux cleaned = 0.000581917 Jy ! Component: 300 - total flux cleaned = 0.000682819 Jy ! Component: 350 - total flux cleaned = 0.000731333 Jy ! Component: 400 - total flux cleaned = 0.000660383 Jy ! Component: 450 - total flux cleaned = 0.000637558 Jy ! Component: 500 - total flux cleaned = 0.00054725 Jy ! Component: 550 - total flux cleaned = 0.000481877 Jy ! Component: 600 - total flux cleaned = 0.000460943 Jy ! Component: 650 - total flux cleaned = 0.000460902 Jy ! Component: 700 - total flux cleaned = 0.000460822 Jy ! Component: 750 - total flux cleaned = 0.000460981 Jy ! Component: 800 - total flux cleaned = 0.000421896 Jy ! Component: 850 - total flux cleaned = 0.00044101 Jy ! Component: 900 - total flux cleaned = 0.000384536 Jy ! Component: 950 - total flux cleaned = 0.000440153 Jy ! Component: 1000 - total flux cleaned = 0.000440104 Jy ! Component: 1050 - total flux cleaned = 0.000493851 Jy ! Component: 1100 - total flux cleaned = 0.000528906 Jy ! Component: 1150 - total flux cleaned = 0.00061548 Jy ! Component: 1200 - total flux cleaned = 0.000666453 Jy ! Component: 1250 - total flux cleaned = 0.00071702 Jy ! Component: 1300 - total flux cleaned = 0.000750198 Jy ! Component: 1350 - total flux cleaned = 0.000799239 Jy ! Component: 1400 - total flux cleaned = 0.000895845 Jy ! Component: 1450 - total flux cleaned = 0.000895578 Jy ! Component: 1500 - total flux cleaned = 0.000958638 Jy ! Component: 1550 - total flux cleaned = 0.00103628 Jy ! Component: 1600 - total flux cleaned = 0.00106684 Jy ! Component: 1650 - total flux cleaned = 0.00114282 Jy ! Component: 1700 - total flux cleaned = 0.00121785 Jy ! Component: 1750 - total flux cleaned = 0.00124773 Jy ! Component: 1800 - total flux cleaned = 0.00135069 Jy ! Component: 1850 - total flux cleaned = 0.00143787 Jy ! Component: 1900 - total flux cleaned = 0.00142328 Jy ! Component: 1950 - total flux cleaned = 0.001495 Jy ! Component: 2000 - total flux cleaned = 0.00155177 Jy ! Total flux subtracted in 2048 components = 0.00160782 Jy ! Clean residual min=-0.000865 max=0.000899 Jy/beam ! Clean residual mean=-0.000009 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 0.641197 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 271 components and 0.641197 Jy ![Exited script file: muppet] wmap "J1357+7643_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 10.31 at 3.611 degrees (North through East) ! Clean map min=-0.0016374 max=0.60022 Jy/beam ! Writing clean map to FITS file: J1357+7643_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.600222 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00028516 device "J1357+7643_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1357+7643_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.142527 0.142527 0.285055 0.57011 1.14022 2.28044 4.56088 9.12175 18.2435 36.487 72.974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.6 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.194 x 10.31 at 3.611 degrees (North through East) ! Clean map min=-0.0016374 max=0.60022 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1357+7643_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1357+7643_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1357+7643_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:34:05 2006