! Started logfile: J1310+3220_X_2006_02_23_yyk_uvs.log on Wed Jul  5 12:27:46 2006
obs J1310+3220_X_2006_02_23_yyk_uva.fits
! Reading UV FITS file: J1310+3220_X_2006_02_23_yyk_uva.fits
! AN table 1: 341 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.735484 visibilities/baseline/integration-bin.
! Found source: J1310+3220
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2397 lines of history.
! 
! Reading 45144 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1310+3220_X_2006_02_23_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.883415 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7272 mas, bmaj=2.135 mas, bpa=14.71 degrees
! Estimated noise=1.67985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.700744 Jy
! Component: 100  -  total flux cleaned = 0.880486 Jy
! Total flux subtracted in 100 components = 0.880486 Jy
! Clean residual min=-0.048484 max=0.096121 Jy/beam
! Clean residual mean=-0.000110 rms=0.014408 Jy/beam
! Combined flux in latest and established models = 0.880486 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.880486 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.208309Jy  sigma=4.155249
! Fit after  self-cal, rms=0.207322Jy  sigma=4.136907
! Inverting map and beam 
! Estimated beam: bmin=0.7272 mas, bmaj=2.135 mas, bpa=14.71 degrees
! Estimated noise=1.67985 mJy/beam.
! Added new window around map position (-1.8, 2.2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.111205 Jy
! Component: 100  -  total flux cleaned = 0.175376 Jy
! Total flux subtracted in 100 components = 0.175376 Jy
! Clean residual min=-0.036564 max=0.034345 Jy/beam
! Clean residual mean=-0.000061 rms=0.008439 Jy/beam
! Combined flux in latest and established models = 1.05586 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 1.05586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143076Jy  sigma=2.711811
! Fit after  self-cal, rms=0.139898Jy  sigma=2.666102
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9155 mas, bmaj=2.3 mas, bpa=13.34 degrees
! Estimated noise=1.16715 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0745504 Jy
! Component: 100  -  total flux cleaned = 0.117838 Jy
! Component: 150  -  total flux cleaned = 0.145449 Jy
! Component: 200  -  total flux cleaned = 0.164267 Jy
! Total flux subtracted in 200 components = 0.164267 Jy
! Clean residual min=-0.025495 max=0.024359 Jy/beam
! Clean residual mean=-0.000100 rms=0.006486 Jy/beam
! Combined flux in latest and established models = 1.22013 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 55 components and 1.22013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108377Jy  sigma=1.946178
! Fit after  self-cal, rms=0.105962Jy  sigma=1.910902
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9155 x 2.3 at 13.34 degrees (North through East)
! Clean map  min=-0.022441  max=0.8442 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.999585
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.99     HN        1.06     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.04     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01169
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.04     KP        0.92     
!   LA        0.96     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00529
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        0.96     KP        0.85     
!   LA        0.97     MK        1.05     NL        1.00     OV        1.00     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.984627
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        1.00     KP        0.89     
!   LA        0.96     MK        1.03     NL        1.01     OV        1.05     
!   PT        1.10     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.105962Jy  sigma=1.910902
! Fit after  self-cal, rms=0.083531Jy  sigma=1.477488
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083531Jy  sigma=1.477488
! Fit after  self-cal, rms=0.083544Jy  sigma=1.477446
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.928 mas, bmaj=2.314 mas, bpa=13.59 degrees
! Estimated noise=1.16228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 1.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219527 Jy
! Component: 100  -  total flux cleaned = 0.027267 Jy
! Component: 150  -  total flux cleaned = 0.0282635 Jy
! Component: 200  -  total flux cleaned = 0.028891 Jy
! Total flux subtracted in 200 components = 0.028891 Jy
! Clean residual min=-0.007854 max=0.009998 Jy/beam
! Clean residual mean=0.000004 rms=0.002200 Jy/beam
! Combined flux in latest and established models = 1.24902 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 81 components and 1.24902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080194Jy  sigma=1.386665
! Fit after  self-cal, rms=0.079624Jy  sigma=1.382520
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079624Jy  sigma=1.382520
! Fit after  self-cal, rms=0.062011Jy  sigma=1.047758
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259467 Jy
! Component: 100  -  total flux cleaned = 0.00476842 Jy
! Component: 150  -  total flux cleaned = 0.00521949 Jy
! Component: 200  -  total flux cleaned = 0.00534461 Jy
! Total flux subtracted in 200 components = 0.00534461 Jy
! Clean residual min=-0.007362 max=0.009275 Jy/beam
! Clean residual mean=0.000004 rms=0.002024 Jy/beam
! Combined flux in latest and established models = 1.25436 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 1.25436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061367Jy  sigma=1.031437
! Fit after  self-cal, rms=0.060337Jy  sigma=1.013582
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.928 x 2.314 at 13.59 degrees (North through East)
! Clean map  min=-0.0063864  max=0.84479 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060337Jy  sigma=1.013582
! Fit after  self-cal, rms=0.058316Jy  sigma=0.949360
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058316Jy  sigma=0.949360
! Fit after  self-cal, rms=0.058289Jy  sigma=0.948259
! Inverting map and beam 
! Estimated beam: bmin=0.93 mas, bmaj=2.318 mas, bpa=13.58 degrees
! Estimated noise=1.16026 mJy/beam.
! Added new window around map position (-15.4, 11.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00794582 Jy
! Component: 100  -  total flux cleaned = 0.0119156 Jy
! Component: 150  -  total flux cleaned = 0.0153959 Jy
! Component: 200  -  total flux cleaned = 0.0182561 Jy
! Total flux subtracted in 200 components = 0.0182561 Jy
! Clean residual min=-0.005566 max=0.005245 Jy/beam
! Clean residual mean=-0.000004 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 1.27262 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 120 components and 1.27262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057107Jy  sigma=0.919194
! Fit after  self-cal, rms=0.057018Jy  sigma=0.918204
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057018Jy  sigma=0.918204
! Fit after  self-cal, rms=0.055873Jy  sigma=0.893817
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055873Jy  sigma=0.893817
! Fit after  self-cal, rms=0.055876Jy  sigma=0.893803
! Inverting map and beam 
! Estimated beam: bmin=0.9306 mas, bmaj=2.32 mas, bpa=13.56 degrees
! Estimated noise=1.15944 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00118317 Jy
! Component: 100  -  total flux cleaned = 0.00353552 Jy
! Component: 150  -  total flux cleaned = 0.00485231 Jy
! Component: 200  -  total flux cleaned = 0.00560243 Jy
! Total flux subtracted in 200 components = 0.00560243 Jy
! Clean residual min=-0.005159 max=0.004944 Jy/beam
! Clean residual mean=0.000009 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 1.27822 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 139 components and 1.27822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055572Jy  sigma=0.886772
! Fit after  self-cal, rms=0.055495Jy  sigma=0.886174
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=2.981 mas, bpa=10.12 degrees
! Estimated noise=1.48517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133776 Jy
! Component: 100  -  total flux cleaned = 0.00279295 Jy
! Component: 150  -  total flux cleaned = 0.00330974 Jy
! Component: 200  -  total flux cleaned = 0.00353688 Jy
! Total flux subtracted in 200 components = 0.00353688 Jy
! Clean residual min=-0.004653 max=0.005405 Jy/beam
! Clean residual mean=0.000017 rms=0.001570 Jy/beam
! Combined flux in latest and established models = 1.28176 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 156 components and 1.28176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055366Jy  sigma=0.884165
! Fit after  self-cal, rms=0.055305Jy  sigma=0.883617
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7314 mas, bmaj=2.143 mas, bpa=14.81 degrees
! Estimated noise=1.68044 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.700997 Jy
! Component: 100  -  total flux cleaned = 0.893862 Jy
! Component: 150  -  total flux cleaned = 0.997231 Jy
! Component: 200  -  total flux cleaned = 1.06457 Jy
! Total flux subtracted in 200 components = 1.06457 Jy
! Clean residual min=-0.017542 max=0.028236 Jy/beam
! Clean residual mean=-0.000047 rms=0.006337 Jy/beam
! Combined flux in latest and established models = 1.06457 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 1.06457 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9306 mas, bmaj=2.32 mas, bpa=13.56 degrees
! Estimated noise=1.15944 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0675443 Jy
! Component: 100  -  total flux cleaned = 0.106957 Jy
! Component: 150  -  total flux cleaned = 0.132336 Jy
! Component: 200  -  total flux cleaned = 0.149367 Jy
! Total flux subtracted in 200 components = 0.149367 Jy
! Clean residual min=-0.007849 max=0.008507 Jy/beam
! Clean residual mean=-0.000059 rms=0.002659 Jy/beam
! Combined flux in latest and established models = 1.21394 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 71 components and 1.21394 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.266 mas, bmaj=2.981 mas, bpa=10.12 degrees
! Estimated noise=1.48517 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202061 Jy
! Component: 100  -  total flux cleaned = 0.032308 Jy
! Component: 150  -  total flux cleaned = 0.0407362 Jy
! Component: 200  -  total flux cleaned = 0.0469501 Jy
! Total flux subtracted in 200 components = 0.0469501 Jy
! Clean residual min=-0.005840 max=0.006059 Jy/beam
! Clean residual mean=-0.000029 rms=0.002048 Jy/beam
! Combined flux in latest and established models = 1.26089 Jy
! Adding 89 model components to the UV plane model.
! The established model now contains 145 components and 1.26089 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9306 mas, bmaj=2.32 mas, bpa=13.56 degrees
! Estimated noise=1.15944 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432608 Jy
! Component: 100  -  total flux cleaned = 0.00771917 Jy
! Component: 150  -  total flux cleaned = 0.00972847 Jy
! Component: 200  -  total flux cleaned = 0.0107876 Jy
! Total flux subtracted in 200 components = 0.0107876 Jy
! Clean residual min=-0.005857 max=0.004578 Jy/beam
! Clean residual mean=-0.000002 rms=0.001236 Jy/beam
! Combined flux in latest and established models = 1.27167 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 171 components and 1.27167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055850Jy  sigma=0.892263
! Fit after  self-cal, rms=0.055726Jy  sigma=0.890118
wmodel J1310+3220_X_2006_02_23_yyk\_map.mod
! Writing 171 model components to file: J1310+3220_X_2006_02_23_yyk_map.mod
wobs J1310+3220_X_2006_02_23_yyk\_uvs.fits
! Writing UV FITS file: J1310+3220_X_2006_02_23_yyk_uvs.fits
wwins J1310+3220_X_2006_02_23_yyk\_map.win
! wwins: Wrote 4 windows to J1310+3220_X_2006_02_23_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130872 Jy
! Component: 100  -  total flux cleaned = -0.00146677 Jy
! Component: 150  -  total flux cleaned = -0.00175452 Jy
! Component: 200  -  total flux cleaned = -0.00216567 Jy
! Component: 250  -  total flux cleaned = -0.00242186 Jy
! Component: 300  -  total flux cleaned = -0.00260276 Jy
! Component: 350  -  total flux cleaned = -0.00283684 Jy
! Component: 400  -  total flux cleaned = -0.00322981 Jy
! Component: 450  -  total flux cleaned = -0.00339205 Jy
! Component: 500  -  total flux cleaned = -0.00349582 Jy
! Component: 550  -  total flux cleaned = -0.00349537 Jy
! Component: 600  -  total flux cleaned = -0.00349531 Jy
! Component: 650  -  total flux cleaned = -0.00344982 Jy
! Component: 700  -  total flux cleaned = -0.00349488 Jy
! Component: 750  -  total flux cleaned = -0.00349447 Jy
! Component: 800  -  total flux cleaned = -0.0034515 Jy
! Component: 850  -  total flux cleaned = -0.00340909 Jy
! Component: 900  -  total flux cleaned = -0.00316832 Jy
! Component: 950  -  total flux cleaned = -0.00316927 Jy
! Component: 1000  -  total flux cleaned = -0.0031694 Jy
! Component: 1050  -  total flux cleaned = -0.00313195 Jy
! Component: 1100  -  total flux cleaned = -0.00309578 Jy
! Component: 1150  -  total flux cleaned = -0.00302411 Jy
! Component: 1200  -  total flux cleaned = -0.00288321 Jy
! Component: 1250  -  total flux cleaned = -0.00274536 Jy
! Component: 1300  -  total flux cleaned = -0.00277957 Jy
! Component: 1350  -  total flux cleaned = -0.00264465 Jy
! Component: 1400  -  total flux cleaned = -0.00254588 Jy
! Component: 1450  -  total flux cleaned = -0.0025128 Jy
! Component: 1500  -  total flux cleaned = -0.00241699 Jy
! Component: 1550  -  total flux cleaned = -0.00247924 Jy
! Component: 1600  -  total flux cleaned = -0.00241721 Jy
! Component: 1650  -  total flux cleaned = -0.00257002 Jy
! Component: 1700  -  total flux cleaned = -0.00253965 Jy
! Component: 1750  -  total flux cleaned = -0.00256964 Jy
! Component: 1800  -  total flux cleaned = -0.00268708 Jy
! Component: 1850  -  total flux cleaned = -0.0027161 Jy
! Component: 1900  -  total flux cleaned = -0.00280298 Jy
! Component: 1950  -  total flux cleaned = -0.00288821 Jy
! Component: 2000  -  total flux cleaned = -0.00305729 Jy
! Total flux subtracted in 2048 components = -0.00316896 Jy
! Clean residual min=-0.001789 max=0.001594 Jy/beam
! Clean residual mean=-0.000000 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 1.26851 Jy
keep
! Adding 113 model components to the UV plane model.
! The established model now contains 284 components and 1.26851 Jy
![Exited script file: muppet]
wmap "J1310+3220_X_2006_02_23_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9306 x 2.32 at 13.56 degrees (North through East)
! Clean map  min=-0.0030666  max=0.84654 Jy/beam
! Writing clean map to FITS file: J1310+3220_X_2006_02_23_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.846536 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000487807 
device "J1310+3220_X_2006_02_23_yyk\_map.eps/VPS"
! Attempting to open device: 'J1310+3220_X_2006_02_23_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.172872 0.172872 0.345743 0.691487 1.38297 2.76595 5.53189 11.0638 22.1276 44.2551 88.5103
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.846 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9306 x 2.32 at 13.56 degrees (North through East)
! Clean map  min=-0.0030666  max=0.84654 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1310+3220_X_2006_02_23_yyk\_map.gif/gif"
! Attempting to open device: 'J1310+3220_X_2006_02_23_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1310+3220_X_2006_02_23_yyk_uvs.log closed on Wed Jul  5 12:28:33 2006