! Started logfile: J1310+3220_X_2006_02_14_yyk_uvs.log on Wed Jul  5 12:26:01 2006
obs J1310+3220_X_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1310+3220_X_2006_02_14_yyk_uva.fits
! AN table 1: 355 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.75975 visibilities/baseline/integration-bin.
! Found source: J1310+3220
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2301 lines of history.
! 
! Reading 48548 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1310+3220_X_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.89283 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7234 mas, bmaj=2.146 mas, bpa=14.38 degrees
! Estimated noise=1.62764 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.713307 Jy
! Component: 100  -  total flux cleaned = 0.895887 Jy
! Total flux subtracted in 100 components = 0.895887 Jy
! Clean residual min=-0.049048 max=0.104363 Jy/beam
! Clean residual mean=-0.000103 rms=0.015122 Jy/beam
! Combined flux in latest and established models = 0.895888 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.895888 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.224826Jy  sigma=4.281547
! Fit after  self-cal, rms=0.223892Jy  sigma=4.267170
! Inverting map and beam 
! Estimated beam: bmin=0.7234 mas, bmaj=2.146 mas, bpa=14.38 degrees
! Estimated noise=1.62764 mJy/beam.
! Added new window around map position (-1.8, 2.2).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.115785 Jy
! Component: 100  -  total flux cleaned = 0.181509 Jy
! Total flux subtracted in 100 components = 0.181509 Jy
! Clean residual min=-0.035835 max=0.032621 Jy/beam
! Clean residual mean=-0.000057 rms=0.008806 Jy/beam
! Combined flux in latest and established models = 1.0774 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 1.0774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.162073Jy  sigma=2.860690
! Fit after  self-cal, rms=0.159045Jy  sigma=2.808123
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9118 mas, bmaj=2.278 mas, bpa=14.45 degrees
! Estimated noise=1.10895 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0730245 Jy
! Component: 100  -  total flux cleaned = 0.114809 Jy
! Component: 150  -  total flux cleaned = 0.141587 Jy
! Component: 200  -  total flux cleaned = 0.160185 Jy
! Total flux subtracted in 200 components = 0.160185 Jy
! Clean residual min=-0.023856 max=0.026044 Jy/beam
! Clean residual mean=-0.000064 rms=0.006680 Jy/beam
! Combined flux in latest and established models = 1.23758 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 53 components and 1.23758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134653Jy  sigma=2.199213
! Fit after  self-cal, rms=0.133462Jy  sigma=2.167772
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9118 x 2.278 at 14.45 degrees (North through East)
! Clean map  min=-0.021043  max=0.85328 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.996782
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.07     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01509
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.05     KP        0.92     
!   LA        0.94     MK        0.98     NL        1.02     OV        0.97     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.01022
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.95     KP        0.84     
!   LA        0.97     MK        1.04     NL        1.00     OV        1.00     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.984342
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        1.00     KP        0.89     
!   LA        0.96     MK        1.06     NL        0.99     OV        1.04     
!   PT        1.11     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.133462Jy  sigma=2.167772
! Fit after  self-cal, rms=0.116913Jy  sigma=1.809383
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116913Jy  sigma=1.809383
! Fit after  self-cal, rms=0.116852Jy  sigma=1.809034
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9235 mas, bmaj=2.289 mas, bpa=14.79 degrees
! Estimated noise=1.10612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 1.2).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0252095 Jy
! Component: 100  -  total flux cleaned = 0.0333906 Jy
! Component: 150  -  total flux cleaned = 0.0348033 Jy
! Component: 200  -  total flux cleaned = 0.0355023 Jy
! Total flux subtracted in 200 components = 0.0355023 Jy
! Clean residual min=-0.009591 max=0.010897 Jy/beam
! Clean residual mean=0.000016 rms=0.002267 Jy/beam
! Combined flux in latest and established models = 1.27308 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 81 components and 1.27308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113462Jy  sigma=1.715461
! Fit after  self-cal, rms=0.113190Jy  sigma=1.711908
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113190Jy  sigma=1.711908
! Fit after  self-cal, rms=0.090109Jy  sigma=1.216910
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3.4, -19.4).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00926197 Jy
! Component: 100  -  total flux cleaned = 0.0140282 Jy
! Component: 150  -  total flux cleaned = 0.0175709 Jy
! Component: 200  -  total flux cleaned = 0.0193136 Jy
! Total flux subtracted in 200 components = 0.0193136 Jy
! Clean residual min=-0.007097 max=0.006810 Jy/beam
! Clean residual mean=0.000024 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 1.2924 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 1.2924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088789Jy  sigma=1.177225
! Fit after  self-cal, rms=0.087816Jy  sigma=1.145241
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9235 x 2.289 at 14.79 degrees (North through East)
! Clean map  min=-0.0069885  max=0.85979 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087816Jy  sigma=1.145241
! Fit after  self-cal, rms=0.085036Jy  sigma=1.066944
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085036Jy  sigma=1.066944
! Fit after  self-cal, rms=0.085172Jy  sigma=1.064487
! Inverting map and beam 
! Estimated beam: bmin=0.9212 mas, bmaj=2.29 mas, bpa=14.88 degrees
! Estimated noise=1.10193 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627553 Jy
! Component: 100  -  total flux cleaned = 0.00219729 Jy
! Component: 150  -  total flux cleaned = 0.00337112 Jy
! Component: 200  -  total flux cleaned = 0.00414084 Jy
! Total flux subtracted in 200 components = 0.00414084 Jy
! Clean residual min=-0.005755 max=0.005060 Jy/beam
! Clean residual mean=0.000021 rms=0.001318 Jy/beam
! Combined flux in latest and established models = 1.29654 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 116 components and 1.29654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084669Jy  sigma=1.051079
! Fit after  self-cal, rms=0.084656Jy  sigma=1.049531
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084656Jy  sigma=1.049531
! Fit after  self-cal, rms=0.083140Jy  sigma=1.015193
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083140Jy  sigma=1.015193
! Fit after  self-cal, rms=0.083163Jy  sigma=1.015131
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=2.294 mas, bpa=14.7 degrees
! Estimated noise=1.10213 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108943 Jy
! Component: 100  -  total flux cleaned = 0.000654613 Jy
! Component: 150  -  total flux cleaned = 0.00147759 Jy
! Component: 200  -  total flux cleaned = 0.00174625 Jy
! Total flux subtracted in 200 components = 0.00174625 Jy
! Clean residual min=-0.004670 max=0.004650 Jy/beam
! Clean residual mean=0.000022 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 1.29828 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 128 components and 1.29828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082857Jy  sigma=1.007648
! Fit after  self-cal, rms=0.082812Jy  sigma=1.006739
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.959 mas, bpa=14.46 degrees
! Estimated noise=1.41811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00272132 Jy
! Component: 100  -  total flux cleaned = 0.00390714 Jy
! Component: 150  -  total flux cleaned = 0.00433917 Jy
! Component: 200  -  total flux cleaned = 0.00475738 Jy
! Total flux subtracted in 200 components = 0.00475738 Jy
! Clean residual min=-0.004359 max=0.004000 Jy/beam
! Clean residual mean=0.000037 rms=0.001403 Jy/beam
! Combined flux in latest and established models = 1.30304 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 148 components and 1.30304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082738Jy  sigma=1.005663
! Fit after  self-cal, rms=0.082724Jy  sigma=1.005097
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7268 mas, bmaj=2.152 mas, bpa=14.49 degrees
! Estimated noise=1.6241 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.713162 Jy
! Component: 100  -  total flux cleaned = 0.911127 Jy
! Component: 150  -  total flux cleaned = 1.01694 Jy
! Component: 200  -  total flux cleaned = 1.08541 Jy
! Total flux subtracted in 200 components = 1.08541 Jy
! Clean residual min=-0.020331 max=0.029416 Jy/beam
! Clean residual mean=-0.000052 rms=0.006603 Jy/beam
! Combined flux in latest and established models = 1.08542 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.08542 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=2.294 mas, bpa=14.7 degrees
! Estimated noise=1.10213 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0683392 Jy
! Component: 100  -  total flux cleaned = 0.109697 Jy
! Component: 150  -  total flux cleaned = 0.136529 Jy
! Component: 200  -  total flux cleaned = 0.15449 Jy
! Total flux subtracted in 200 components = 0.15449 Jy
! Clean residual min=-0.008648 max=0.008707 Jy/beam
! Clean residual mean=-0.000040 rms=0.002590 Jy/beam
! Combined flux in latest and established models = 1.23991 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 1.23991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.289 mas, bmaj=2.959 mas, bpa=14.46 degrees
! Estimated noise=1.41811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198271 Jy
! Component: 100  -  total flux cleaned = 0.0314343 Jy
! Component: 150  -  total flux cleaned = 0.0394095 Jy
! Component: 200  -  total flux cleaned = 0.0451424 Jy
! Total flux subtracted in 200 components = 0.0451424 Jy
! Clean residual min=-0.006067 max=0.005337 Jy/beam
! Clean residual mean=0.000006 rms=0.001834 Jy/beam
! Combined flux in latest and established models = 1.28505 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 115 components and 1.28505 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9233 mas, bmaj=2.294 mas, bpa=14.7 degrees
! Estimated noise=1.10213 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00374853 Jy
! Component: 100  -  total flux cleaned = 0.00563988 Jy
! Component: 150  -  total flux cleaned = 0.00710011 Jy
! Component: 200  -  total flux cleaned = 0.00813642 Jy
! Total flux subtracted in 200 components = 0.00813642 Jy
! Clean residual min=-0.005069 max=0.004498 Jy/beam
! Clean residual mean=0.000005 rms=0.001155 Jy/beam
! Combined flux in latest and established models = 1.29318 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 140 components and 1.29318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082880Jy  sigma=1.010734
! Fit after  self-cal, rms=0.082750Jy  sigma=1.007341
wmodel J1310+3220_X_2006_02_14_yyk\_map.mod
! Writing 140 model components to file: J1310+3220_X_2006_02_14_yyk_map.mod
wobs J1310+3220_X_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1310+3220_X_2006_02_14_yyk_uvs.fits
wwins J1310+3220_X_2006_02_14_yyk\_map.win
! wwins: Wrote 4 windows to J1310+3220_X_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164556 Jy
! Component: 100  -  total flux cleaned = 0.00259117 Jy
! Component: 150  -  total flux cleaned = 0.00319643 Jy
! Component: 200  -  total flux cleaned = 0.00375467 Jy
! Component: 250  -  total flux cleaned = 0.00428056 Jy
! Component: 300  -  total flux cleaned = 0.00444896 Jy
! Component: 350  -  total flux cleaned = 0.00466178 Jy
! Component: 400  -  total flux cleaned = 0.00476498 Jy
! Component: 450  -  total flux cleaned = 0.00491223 Jy
! Component: 500  -  total flux cleaned = 0.00519633 Jy
! Component: 550  -  total flux cleaned = 0.00560767 Jy
! Component: 600  -  total flux cleaned = 0.00591812 Jy
! Component: 650  -  total flux cleaned = 0.00617764 Jy
! Component: 700  -  total flux cleaned = 0.00659756 Jy
! Component: 750  -  total flux cleaned = 0.00688335 Jy
! Component: 800  -  total flux cleaned = 0.00712198 Jy
! Component: 850  -  total flux cleaned = 0.00735518 Jy
! Component: 900  -  total flux cleaned = 0.00765898 Jy
! Component: 950  -  total flux cleaned = 0.00784375 Jy
! Component: 1000  -  total flux cleaned = 0.00816957 Jy
! Component: 1050  -  total flux cleaned = 0.00841862 Jy
! Component: 1100  -  total flux cleaned = 0.00866234 Jy
! Component: 1150  -  total flux cleaned = 0.00917512 Jy
! Component: 1200  -  total flux cleaned = 0.00944289 Jy
! Component: 1250  -  total flux cleaned = 0.00980554 Jy
! Component: 1300  -  total flux cleaned = 0.0102259 Jy
! Component: 1350  -  total flux cleaned = 0.0105123 Jy
! Component: 1400  -  total flux cleaned = 0.0108246 Jy
! Component: 1450  -  total flux cleaned = 0.0111933 Jy
! Component: 1500  -  total flux cleaned = 0.0114349 Jy
! Component: 1550  -  total flux cleaned = 0.0116732 Jy
! Component: 1600  -  total flux cleaned = 0.0119368 Jy
! Component: 1650  -  total flux cleaned = 0.0121678 Jy
! Component: 1700  -  total flux cleaned = 0.0123103 Jy
! Component: 1750  -  total flux cleaned = 0.0125075 Jy
! Component: 1800  -  total flux cleaned = 0.0126468 Jy
! Component: 1850  -  total flux cleaned = 0.0128666 Jy
! Component: 1900  -  total flux cleaned = 0.0130834 Jy
! Component: 1950  -  total flux cleaned = 0.0131637 Jy
! Component: 2000  -  total flux cleaned = 0.013376 Jy
! Total flux subtracted in 2048 components = 0.0135599 Jy
! Clean residual min=-0.001367 max=0.001463 Jy/beam
! Clean residual mean=-0.000001 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 1.30674 Jy
keep
! Adding 136 model components to the UV plane model.
! The established model now contains 276 components and 1.30674 Jy
![Exited script file: muppet]
wmap "J1310+3220_X_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9233 x 2.294 at 14.7 degrees (North through East)
! Clean map  min=-0.0021824  max=0.8571 Jy/beam
! Writing clean map to FITS file: J1310+3220_X_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.857098 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000470937 
device "J1310+3220_X_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1310+3220_X_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.164837 0.164837 0.329674 0.659347 1.31869 2.63739 5.27478 10.5496 21.0991 42.1982 84.3964
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.857 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9233 x 2.294 at 14.7 degrees (North through East)
! Clean map  min=-0.0021824  max=0.8571 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1310+3220_X_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1310+3220_X_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1310+3220_X_2006_02_14_yyk_uvs.log closed on Wed Jul  5 12:26:52 2006