! Started logfile: J1310+3220_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:25:22 2006 obs J1310+3220_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1310+3220_S_2006_02_23_yyk_uva.fits ! AN table 1: 341 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.735484 visibilities/baseline/integration-bin. ! Found source: J1310+3220 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 45144 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1310+3220_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.12065 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=7.717 mas, bpa=18.42 degrees ! Estimated noise=1.50808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.899135 Jy ! Component: 100 - total flux cleaned = 1.18232 Jy ! Total flux subtracted in 100 components = 1.18232 Jy ! Clean residual min=-0.057838 max=0.091428 Jy/beam ! Clean residual mean=0.000134 rms=0.019699 Jy/beam ! Combined flux in latest and established models = 1.18232 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.18232 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.257151Jy sigma=4.674526 ! Fit after self-cal, rms=0.245939Jy sigma=4.482870 ! Inverting map and beam ! Estimated beam: bmin=2.855 mas, bmaj=7.717 mas, bpa=18.42 degrees ! Estimated noise=1.50808 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=8.283 mas, bpa=14.9 degrees ! Estimated noise=1.14984 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.143485 Jy ! Component: 100 - total flux cleaned = 0.194948 Jy ! Component: 150 - total flux cleaned = 0.221018 Jy ! Component: 200 - total flux cleaned = 0.235982 Jy ! Total flux subtracted in 200 components = 0.235982 Jy ! Clean residual min=-0.032318 max=0.035268 Jy/beam ! Clean residual mean=-0.000175 rms=0.008816 Jy/beam ! Combined flux in latest and established models = 1.4183 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 43 components and 1.4183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172355Jy sigma=3.125393 ! Fit after self-cal, rms=0.171096Jy sigma=3.105961 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.42 x 8.283 at 14.9 degrees (North through East) ! Clean map min=-0.030844 max=1.0119 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00797 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.94 HN 0.98 KP 0.93 ! LA 1.21 MK 0.92 NL 0.98 OV 0.97 ! PT 1.04 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.994276 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.00 KP 0.95 ! LA 1.18 MK 1.01 NL 1.00 OV 1.00 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971458 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.98 HN 1.02 KP 0.95 ! LA 0.93 MK 1.13 NL 1.10 OV 1.02 ! PT 1.06 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03875 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 0.96 KP 0.88 ! LA 0.80 MK 1.11 NL 1.02 OV 0.89 ! PT 0.94 SC 1.10 ! ! ! Fit before self-cal, rms=0.171096Jy sigma=3.105961 ! Fit after self-cal, rms=0.105437Jy sigma=1.919527 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105437Jy sigma=1.919527 ! Fit after self-cal, rms=0.105487Jy sigma=1.919325 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.316 mas, bpa=15.19 degrees ! Estimated noise=1.1466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0287749 Jy ! Component: 100 - total flux cleaned = 0.0325223 Jy ! Component: 150 - total flux cleaned = 0.0334766 Jy ! Component: 200 - total flux cleaned = 0.0343032 Jy ! Total flux subtracted in 200 components = 0.0343032 Jy ! Clean residual min=-0.011643 max=0.015195 Jy/beam ! Clean residual mean=0.000128 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 1.4526 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 74 components and 1.4526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098124Jy sigma=1.771046 ! Fit after self-cal, rms=0.097327Jy sigma=1.758729 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097327Jy sigma=1.758729 ! Fit after self-cal, rms=0.089536Jy sigma=1.625993 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152367 Jy ! Component: 100 - total flux cleaned = 0.0181615 Jy ! Component: 150 - total flux cleaned = 0.0209384 Jy ! Component: 200 - total flux cleaned = 0.0224083 Jy ! Total flux subtracted in 200 components = 0.0224083 Jy ! Clean residual min=-0.010535 max=0.008343 Jy/beam ! Clean residual mean=0.000072 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 1.47501 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 97 components and 1.47501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085732Jy sigma=1.553040 ! Fit after self-cal, rms=0.084892Jy sigma=1.543081 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.316 at 15.19 degrees (North through East) ! Clean map min=-0.0098018 max=1.0178 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084892Jy sigma=1.543081 ! Fit after self-cal, rms=0.065593Jy sigma=1.096035 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065593Jy sigma=1.096035 ! Fit after self-cal, rms=0.065476Jy sigma=1.094992 ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=8.333 mas, bpa=15.09 degrees ! Estimated noise=1.14562 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144152 Jy ! Component: 100 - total flux cleaned = -0.000499986 Jy ! Component: 150 - total flux cleaned = 0.000329043 Jy ! Component: 200 - total flux cleaned = 0.00127385 Jy ! Total flux subtracted in 200 components = 0.00127385 Jy ! Clean residual min=-0.008098 max=0.006092 Jy/beam ! Clean residual mean=0.000050 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 1.47629 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 120 components and 1.47629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063891Jy sigma=1.062511 ! Fit after self-cal, rms=0.063708Jy sigma=1.058827 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063708Jy sigma=1.058827 ! Fit after self-cal, rms=0.061628Jy sigma=1.010279 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061628Jy sigma=1.010279 ! Fit after self-cal, rms=0.061635Jy sigma=1.010249 ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=8.342 mas, bpa=15.03 degrees ! Estimated noise=1.14624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017149 Jy ! Component: 100 - total flux cleaned = -0.00137317 Jy ! Component: 150 - total flux cleaned = -0.000623026 Jy ! Component: 200 - total flux cleaned = -0.000355758 Jy ! Total flux subtracted in 200 components = -0.000355758 Jy ! Clean residual min=-0.006527 max=0.005620 Jy/beam ! Clean residual mean=0.000037 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 1.47593 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 137 components and 1.47593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060755Jy sigma=0.992204 ! Fit after self-cal, rms=0.060634Jy sigma=0.989709 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=10.12 mas, bpa=15.17 degrees ! Estimated noise=1.42745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000937425 Jy ! Component: 100 - total flux cleaned = -0.000922134 Jy ! Component: 150 - total flux cleaned = -0.00111312 Jy ! Component: 200 - total flux cleaned = -0.00127344 Jy ! Total flux subtracted in 200 components = -0.00127344 Jy ! Clean residual min=-0.004306 max=0.004542 Jy/beam ! Clean residual mean=0.000068 rms=0.001311 Jy/beam ! Combined flux in latest and established models = 1.47466 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 1.47466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060509Jy sigma=0.986163 ! Fit after self-cal, rms=0.060451Jy sigma=0.984478 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.886 mas, bmaj=7.749 mas, bpa=18.38 degrees ! Estimated noise=1.49917 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.899438 Jy ! Component: 100 - total flux cleaned = 1.17807 Jy ! Component: 150 - total flux cleaned = 1.28807 Jy ! Component: 200 - total flux cleaned = 1.34199 Jy ! Total flux subtracted in 200 components = 1.34199 Jy ! Clean residual min=-0.015343 max=0.026595 Jy/beam ! Clean residual mean=0.000108 rms=0.005408 Jy/beam ! Combined flux in latest and established models = 1.34199 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 1.34199 Jy ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=8.342 mas, bpa=15.03 degrees ! Estimated noise=1.14624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0449779 Jy ! Component: 100 - total flux cleaned = 0.0699665 Jy ! Component: 150 - total flux cleaned = 0.0872343 Jy ! Component: 200 - total flux cleaned = 0.0980833 Jy ! Total flux subtracted in 200 components = 0.0980833 Jy ! Clean residual min=-0.007052 max=0.010905 Jy/beam ! Clean residual mean=0.000080 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 1.44008 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 81 components and 1.44008 Jy ! Inverting map ! Added new window around map position (-11, -42). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118459 Jy ! Component: 100 - total flux cleaned = 0.0171925 Jy ! Component: 150 - total flux cleaned = 0.0207642 Jy ! Component: 200 - total flux cleaned = 0.0229066 Jy ! Total flux subtracted in 200 components = 0.0229066 Jy ! Clean residual min=-0.005904 max=0.007441 Jy/beam ! Clean residual mean=0.000051 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 1.46298 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 116 components and 1.46298 Jy ! Inverting map ! Added new window around map position (1.5, 44.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776585 Jy ! Component: 100 - total flux cleaned = 0.0109825 Jy ! Component: 150 - total flux cleaned = 0.0127745 Jy ! Component: 200 - total flux cleaned = 0.0137432 Jy ! Total flux subtracted in 200 components = 0.0137432 Jy ! Clean residual min=-0.004876 max=0.003954 Jy/beam ! Clean residual mean=0.000036 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 1.47673 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 148 components and 1.47673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.949 mas, bmaj=10.12 mas, bpa=15.17 degrees ! Estimated noise=1.42745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389252 Jy ! Component: 100 - total flux cleaned = 0.00581092 Jy ! Component: 150 - total flux cleaned = 0.00720689 Jy ! Component: 200 - total flux cleaned = 0.00847857 Jy ! Total flux subtracted in 200 components = 0.00847857 Jy ! Clean residual min=-0.003556 max=0.003236 Jy/beam ! Clean residual mean=0.000044 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 1.48521 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 197 components and 1.48521 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.504 mas, bmaj=8.342 mas, bpa=15.03 degrees ! Estimated noise=1.14624 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00164716 Jy ! Component: 100 - total flux cleaned = -0.00217662 Jy ! Component: 150 - total flux cleaned = -0.00266135 Jy ! Component: 200 - total flux cleaned = -0.00266351 Jy ! Total flux subtracted in 200 components = -0.00266351 Jy ! Clean residual min=-0.003903 max=0.003344 Jy/beam ! Clean residual mean=0.000021 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 1.48254 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 219 components and 1.48254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058705Jy sigma=0.945373 ! Fit after self-cal, rms=0.058541Jy sigma=0.941464 wmodel J1310+3220_S_2006_02_23_yyk\_map.mod ! Writing 219 model components to file: J1310+3220_S_2006_02_23_yyk_map.mod wobs J1310+3220_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1310+3220_S_2006_02_23_yyk_uvs.fits wwins J1310+3220_S_2006_02_23_yyk\_map.win ! wwins: Wrote 6 windows to J1310+3220_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00170903 Jy ! Component: 100 - total flux cleaned = -0.00230936 Jy ! Component: 150 - total flux cleaned = -0.00286103 Jy ! Component: 200 - total flux cleaned = -0.00348311 Jy ! Component: 250 - total flux cleaned = -0.00397944 Jy ! Component: 300 - total flux cleaned = -0.00436125 Jy ! Component: 350 - total flux cleaned = -0.0046851 Jy ! Component: 400 - total flux cleaned = -0.00504196 Jy ! Component: 450 - total flux cleaned = -0.00538687 Jy ! Component: 500 - total flux cleaned = -0.00567986 Jy ! Component: 550 - total flux cleaned = -0.00592431 Jy ! Component: 600 - total flux cleaned = -0.00616214 Jy ! Component: 650 - total flux cleaned = -0.00647001 Jy ! Component: 700 - total flux cleaned = -0.00658244 Jy ! Component: 750 - total flux cleaned = -0.00676554 Jy ! Component: 800 - total flux cleaned = -0.00683607 Jy ! Component: 850 - total flux cleaned = -0.00690629 Jy ! Component: 900 - total flux cleaned = -0.00697471 Jy ! Component: 950 - total flux cleaned = -0.006975 Jy ! Component: 1000 - total flux cleaned = -0.00704042 Jy ! Component: 1050 - total flux cleaned = -0.00707136 Jy ! Component: 1100 - total flux cleaned = -0.00703893 Jy ! Component: 1150 - total flux cleaned = -0.00703901 Jy ! Component: 1200 - total flux cleaned = -0.00700947 Jy ! Component: 1250 - total flux cleaned = -0.0070698 Jy ! Component: 1300 - total flux cleaned = -0.00712924 Jy ! Component: 1350 - total flux cleaned = -0.00712944 Jy ! Component: 1400 - total flux cleaned = -0.00721469 Jy ! Component: 1450 - total flux cleaned = -0.00715787 Jy ! Component: 1500 - total flux cleaned = -0.00712981 Jy ! Component: 1550 - total flux cleaned = -0.00718402 Jy ! Component: 1600 - total flux cleaned = -0.00712946 Jy ! Component: 1650 - total flux cleaned = -0.00718229 Jy ! Component: 1700 - total flux cleaned = -0.0071034 Jy ! Component: 1750 - total flux cleaned = -0.00710369 Jy ! Component: 1800 - total flux cleaned = -0.00707804 Jy ! Component: 1850 - total flux cleaned = -0.0070024 Jy ! Component: 1900 - total flux cleaned = -0.00702769 Jy ! Component: 1950 - total flux cleaned = -0.00705241 Jy ! Component: 2000 - total flux cleaned = -0.00710111 Jy ! Total flux subtracted in 2048 components = -0.00712502 Jy ! Clean residual min=-0.001606 max=0.001959 Jy/beam ! Clean residual mean=0.000016 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 1.47542 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 342 components and 1.47542 Jy ![Exited script file: muppet] wmap "J1310+3220_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.504 x 8.342 at 15.03 degrees (North through East) ! Clean map min=-0.0035606 max=1.0165 Jy/beam ! Writing clean map to FITS file: J1310+3220_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.01652 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000474128 device "J1310+3220_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1310+3220_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.139926 0.139926 0.279852 0.559705 1.11941 2.23882 4.47764 8.95528 17.9106 35.8211 71.6422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.016 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.504 x 8.342 at 15.03 degrees (North through East) ! Clean map min=-0.0035606 max=1.0165 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1310+3220_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1310+3220_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1310+3220_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:26:01 2006