! Started logfile: J1310+3220_S_2006_02_16_yyk_uvs.log on Wed Jul 5 12:24:46 2006 obs J1310+3220_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1310+3220_S_2006_02_16_yyk_uva.fits ! AN table 1: 357 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.771366 visibilities/baseline/integration-bin. ! Found source: J1310+3220 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 49568 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1310+3220_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.11548 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.745 mas, bpa=16.05 degrees ! Estimated noise=1.57176 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.913121 Jy ! Component: 100 - total flux cleaned = 1.18798 Jy ! Total flux subtracted in 100 components = 1.18798 Jy ! Clean residual min=-0.058382 max=0.085502 Jy/beam ! Clean residual mean=0.000022 rms=0.018391 Jy/beam ! Combined flux in latest and established models = 1.18798 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.18798 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.252708Jy sigma=4.703049 ! Fit after self-cal, rms=0.238036Jy sigma=4.497599 ! Inverting map and beam ! Estimated beam: bmin=2.914 mas, bmaj=7.745 mas, bpa=16.05 degrees ! Estimated noise=1.57176 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.523 mas, bmaj=8.559 mas, bpa=16.1 degrees ! Estimated noise=1.06908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.136527 Jy ! Component: 100 - total flux cleaned = 0.18231 Jy ! Component: 150 - total flux cleaned = 0.203381 Jy ! Component: 200 - total flux cleaned = 0.208747 Jy ! Total flux subtracted in 200 components = 0.208747 Jy ! Clean residual min=-0.029716 max=0.039237 Jy/beam ! Clean residual mean=-0.000260 rms=0.009019 Jy/beam ! Combined flux in latest and established models = 1.39673 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 43 components and 1.39673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171771Jy sigma=3.198488 ! Fit after self-cal, rms=0.169910Jy sigma=3.176942 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.523 x 8.559 at 16.1 degrees (North through East) ! Clean map min=-0.027882 max=1.0156 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00763 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.98 KP 0.93 ! LA 1.22 MK 0.91 NL 0.98 OV 0.96 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.995031 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.01 KP 0.95 ! LA 1.19 MK 0.99 NL 1.00 OV 0.99 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.975062 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.03 KP 0.95 ! LA 0.95 MK 1.11 NL 1.08 OV 1.02 ! PT 1.07 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03664 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 0.88 ! LA 0.78 MK 1.12 NL 1.01 OV 0.89 ! PT 0.93 SC 1.07 ! ! ! Fit before self-cal, rms=0.169910Jy sigma=3.176942 ! Fit after self-cal, rms=0.106084Jy sigma=1.999259 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106084Jy sigma=1.999259 ! Fit after self-cal, rms=0.106076Jy sigma=1.998994 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=8.612 mas, bpa=16.45 degrees ! Estimated noise=1.06813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-11, 2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.032031 Jy ! Component: 100 - total flux cleaned = 0.0397102 Jy ! Component: 150 - total flux cleaned = 0.0401926 Jy ! Component: 200 - total flux cleaned = 0.0401795 Jy ! Total flux subtracted in 200 components = 0.0401795 Jy ! Clean residual min=-0.012509 max=0.014135 Jy/beam ! Clean residual mean=0.000095 rms=0.003015 Jy/beam ! Combined flux in latest and established models = 1.4369 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 1.4369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098663Jy sigma=1.818877 ! Fit after self-cal, rms=0.097812Jy sigma=1.807091 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097812Jy sigma=1.807091 ! Fit after self-cal, rms=0.089353Jy sigma=1.653953 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-22, 0). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144138 Jy ! Component: 100 - total flux cleaned = 0.0173424 Jy ! Component: 150 - total flux cleaned = 0.0186789 Jy ! Component: 200 - total flux cleaned = 0.0195658 Jy ! Total flux subtracted in 200 components = 0.0195658 Jy ! Clean residual min=-0.009712 max=0.008807 Jy/beam ! Clean residual mean=0.000043 rms=0.002039 Jy/beam ! Combined flux in latest and established models = 1.45647 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 1.45647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085762Jy sigma=1.582630 ! Fit after self-cal, rms=0.084627Jy sigma=1.571390 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.589 x 8.612 at 16.45 degrees (North through East) ! Clean map min=-0.009185 max=1.0252 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084627Jy sigma=1.571390 ! Fit after self-cal, rms=0.070853Jy sigma=1.176198 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070853Jy sigma=1.176198 ! Fit after self-cal, rms=0.070675Jy sigma=1.174918 ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=8.611 mas, bpa=16.23 degrees ! Estimated noise=1.06773 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012427 Jy ! Component: 100 - total flux cleaned = 0.00173321 Jy ! Component: 150 - total flux cleaned = 0.00255881 Jy ! Component: 200 - total flux cleaned = 0.00347629 Jy ! Total flux subtracted in 200 components = 0.00347629 Jy ! Clean residual min=-0.007685 max=0.007009 Jy/beam ! Clean residual mean=0.000036 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 1.45995 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 127 components and 1.45995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068979Jy sigma=1.142949 ! Fit after self-cal, rms=0.068678Jy sigma=1.139199 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068678Jy sigma=1.139199 ! Fit after self-cal, rms=0.063429Jy sigma=1.038599 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063429Jy sigma=1.038599 ! Fit after self-cal, rms=0.063422Jy sigma=1.038548 ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=8.621 mas, bpa=16.08 degrees ! Estimated noise=1.06936 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000869283 Jy ! Component: 100 - total flux cleaned = 0.000839346 Jy ! Component: 150 - total flux cleaned = 0.000685421 Jy ! Component: 200 - total flux cleaned = 0.00095818 Jy ! Total flux subtracted in 200 components = 0.00095818 Jy ! Clean residual min=-0.006600 max=0.006065 Jy/beam ! Clean residual mean=0.000029 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 1.4609 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 139 components and 1.4609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062392Jy sigma=1.019304 ! Fit after self-cal, rms=0.062211Jy sigma=1.016453 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=10.31 mas, bpa=13.78 degrees ! Estimated noise=1.30269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019703 Jy ! Component: 100 - total flux cleaned = -6.99763e-05 Jy ! Component: 150 - total flux cleaned = -0.000328513 Jy ! Component: 200 - total flux cleaned = -0.000481969 Jy ! Total flux subtracted in 200 components = -0.000481969 Jy ! Clean residual min=-0.004730 max=0.004185 Jy/beam ! Clean residual mean=0.000041 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 1.46042 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 1.46042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062153Jy sigma=1.014095 ! Fit after self-cal, rms=0.062107Jy sigma=1.013155 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.947 mas, bmaj=7.775 mas, bpa=15.96 degrees ! Estimated noise=1.564 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.915039 Jy ! Component: 100 - total flux cleaned = 1.1876 Jy ! Component: 150 - total flux cleaned = 1.29184 Jy ! Component: 200 - total flux cleaned = 1.3433 Jy ! Total flux subtracted in 200 components = 1.3433 Jy ! Clean residual min=-0.014517 max=0.021974 Jy/beam ! Clean residual mean=0.000071 rms=0.005047 Jy/beam ! Combined flux in latest and established models = 1.3433 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 1.3433 Jy ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=8.621 mas, bpa=16.08 degrees ! Estimated noise=1.06936 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0428683 Jy ! Component: 100 - total flux cleaned = 0.0676263 Jy ! Component: 150 - total flux cleaned = 0.084464 Jy ! Component: 200 - total flux cleaned = 0.0966003 Jy ! Total flux subtracted in 200 components = 0.0966003 Jy ! Clean residual min=-0.007129 max=0.009855 Jy/beam ! Clean residual mean=0.000066 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 1.4399 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 79 components and 1.4399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.013 mas, bmaj=10.31 mas, bpa=13.78 degrees ! Estimated noise=1.30269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947929 Jy ! Component: 100 - total flux cleaned = 0.013261 Jy ! Component: 150 - total flux cleaned = 0.0146806 Jy ! Component: 200 - total flux cleaned = 0.015064 Jy ! Total flux subtracted in 200 components = 0.015064 Jy ! Clean residual min=-0.005122 max=0.007138 Jy/beam ! Clean residual mean=0.000063 rms=0.001752 Jy/beam ! Combined flux in latest and established models = 1.45497 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 129 components and 1.45497 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.625 mas, bmaj=8.621 mas, bpa=16.08 degrees ! Estimated noise=1.06936 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00357588 Jy ! Component: 100 - total flux cleaned = -0.00385342 Jy ! Component: 150 - total flux cleaned = -0.0034125 Jy ! Component: 200 - total flux cleaned = -0.00321735 Jy ! Total flux subtracted in 200 components = -0.00321735 Jy ! Clean residual min=-0.005331 max=0.005792 Jy/beam ! Clean residual mean=0.000034 rms=0.001503 Jy/beam ! Combined flux in latest and established models = 1.45175 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 162 components and 1.45175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061650Jy sigma=1.008471 ! Fit after self-cal, rms=0.060918Jy sigma=0.995415 wmodel J1310+3220_S_2006_02_16_yyk\_map.mod ! Writing 162 model components to file: J1310+3220_S_2006_02_16_yyk_map.mod wobs J1310+3220_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1310+3220_S_2006_02_16_yyk_uvs.fits wwins J1310+3220_S_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J1310+3220_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000853276 Jy ! Component: 100 - total flux cleaned = -0.00145779 Jy ! Component: 150 - total flux cleaned = -0.00186084 Jy ! Component: 200 - total flux cleaned = -0.0022436 Jy ! Component: 250 - total flux cleaned = -0.00246048 Jy ! Component: 300 - total flux cleaned = -0.00266468 Jy ! Component: 350 - total flux cleaned = -0.00286032 Jy ! Component: 400 - total flux cleaned = -0.00298502 Jy ! Component: 450 - total flux cleaned = -0.00316484 Jy ! Component: 500 - total flux cleaned = -0.00310701 Jy ! Component: 550 - total flux cleaned = -0.00294054 Jy ! Component: 600 - total flux cleaned = -0.00267207 Jy ! Component: 650 - total flux cleaned = -0.0025677 Jy ! Component: 700 - total flux cleaned = -0.00241486 Jy ! Component: 750 - total flux cleaned = -0.00221573 Jy ! Component: 800 - total flux cleaned = -0.00221577 Jy ! Component: 850 - total flux cleaned = -0.00221681 Jy ! Component: 900 - total flux cleaned = -0.00212424 Jy ! Component: 950 - total flux cleaned = -0.00217039 Jy ! Component: 1000 - total flux cleaned = -0.00212622 Jy ! Component: 1050 - total flux cleaned = -0.00208172 Jy ! Component: 1100 - total flux cleaned = -0.00191089 Jy ! Component: 1150 - total flux cleaned = -0.00191153 Jy ! Component: 1200 - total flux cleaned = -0.00182927 Jy ! Component: 1250 - total flux cleaned = -0.0017077 Jy ! Component: 1300 - total flux cleaned = -0.00166835 Jy ! Component: 1350 - total flux cleaned = -0.00155011 Jy ! Component: 1400 - total flux cleaned = -0.00135709 Jy ! Component: 1450 - total flux cleaned = -0.00128246 Jy ! Component: 1500 - total flux cleaned = -0.00113417 Jy ! Component: 1550 - total flux cleaned = -0.000988215 Jy ! Component: 1600 - total flux cleaned = -0.000844538 Jy ! Component: 1650 - total flux cleaned = -0.000562027 Jy ! Component: 1700 - total flux cleaned = -0.000318684 Jy ! Component: 1750 - total flux cleaned = -0.000113225 Jy ! Component: 1800 - total flux cleaned = 0.000123756 Jy ! Component: 1850 - total flux cleaned = 0.000391322 Jy ! Component: 1900 - total flux cleaned = 0.000621979 Jy ! Component: 1950 - total flux cleaned = 0.000946889 Jy ! Component: 2000 - total flux cleaned = 0.00107469 Jy ! Total flux subtracted in 2048 components = 0.00120138 Jy ! Clean residual min=-0.001797 max=0.001913 Jy/beam ! Clean residual mean=0.000015 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.45295 Jy keep ! Adding 121 model components to the UV plane model. ! The established model now contains 282 components and 1.45295 Jy ![Exited script file: muppet] wmap "J1310+3220_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.625 x 8.621 at 16.08 degrees (North through East) ! Clean map min=-0.0043169 max=1.0302 Jy/beam ! Writing clean map to FITS file: J1310+3220_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.03019 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000622818 device "J1310+3220_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1310+3220_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.181371 0.181371 0.362741 0.725482 1.45096 2.90193 5.80386 11.6077 23.2154 46.4309 92.8617 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.03 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.625 x 8.621 at 16.08 degrees (North through East) ! Clean map min=-0.0043169 max=1.0302 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1310+3220_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1310+3220_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1310+3220_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:25:21 2006