! Started logfile: J1310+3220_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:24:01 2006 obs J1310+3220_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1310+3220_S_2006_02_14_yyk_uva.fits ! AN table 1: 355 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.760188 visibilities/baseline/integration-bin. ! Found source: J1310+3220 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 48576 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1310+3220_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.12556 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=7.756 mas, bpa=16.79 degrees ! Estimated noise=1.51084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.907676 Jy ! Component: 100 - total flux cleaned = 1.19222 Jy ! Total flux subtracted in 100 components = 1.19222 Jy ! Clean residual min=-0.053972 max=0.086960 Jy/beam ! Clean residual mean=0.000074 rms=0.018364 Jy/beam ! Combined flux in latest and established models = 1.19222 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.19222 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.250391Jy sigma=4.384791 ! Fit after self-cal, rms=0.241693Jy sigma=4.222889 ! Inverting map and beam ! Estimated beam: bmin=2.865 mas, bmaj=7.756 mas, bpa=16.79 degrees ! Estimated noise=1.51084 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.43 mas, bmaj=8.314 mas, bpa=14.03 degrees ! Estimated noise=1.10017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.139221 Jy ! Component: 100 - total flux cleaned = 0.188221 Jy ! Component: 150 - total flux cleaned = 0.210731 Jy ! Component: 200 - total flux cleaned = 0.216155 Jy ! Total flux subtracted in 200 components = 0.216155 Jy ! Clean residual min=-0.024429 max=0.032886 Jy/beam ! Clean residual mean=-0.000255 rms=0.008126 Jy/beam ! Combined flux in latest and established models = 1.40837 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 1.40837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177497Jy sigma=2.941818 ! Fit after self-cal, rms=0.176876Jy sigma=2.926599 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.43 x 8.314 at 14.03 degrees (North through East) ! Clean map min=-0.023661 max=1.0198 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01019 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.97 KP 0.94 ! LA 1.21 MK 0.92 NL 0.98 OV 0.99 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.987701 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.01 KP 0.96 ! LA 1.16 MK 0.99 NL 1.01 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.973407 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.03 KP 0.96 ! LA 0.93 MK 1.12 NL 1.10 OV 1.04 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02326 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00 HN 0.95 KP 0.88 ! LA 0.80 MK 1.14 NL 1.03 OV 0.88 ! PT 0.93 SC 1.12 ! ! ! Fit before self-cal, rms=0.176876Jy sigma=2.926599 ! Fit after self-cal, rms=0.118880Jy sigma=1.846169 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118880Jy sigma=1.846169 ! Fit after self-cal, rms=0.118869Jy sigma=1.845708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.526 mas, bmaj=8.324 mas, bpa=13.86 degrees ! Estimated noise=1.09282 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0242254 Jy ! Component: 100 - total flux cleaned = 0.0256083 Jy ! Component: 150 - total flux cleaned = 0.0246195 Jy ! Component: 200 - total flux cleaned = 0.0238021 Jy ! Total flux subtracted in 200 components = 0.0238021 Jy ! Clean residual min=-0.011525 max=0.015005 Jy/beam ! Clean residual mean=0.000064 rms=0.002995 Jy/beam ! Combined flux in latest and established models = 1.43218 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 76 components and 1.43218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112239Jy sigma=1.681824 ! Fit after self-cal, rms=0.111763Jy sigma=1.670655 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111763Jy sigma=1.670655 ! Fit after self-cal, rms=0.107603Jy sigma=1.560966 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.5, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183306 Jy ! Component: 100 - total flux cleaned = 0.0188375 Jy ! Component: 150 - total flux cleaned = 0.0191296 Jy ! Component: 200 - total flux cleaned = 0.0194088 Jy ! Total flux subtracted in 200 components = 0.0194088 Jy ! Clean residual min=-0.009420 max=0.009303 Jy/beam ! Clean residual mean=0.000010 rms=0.002105 Jy/beam ! Combined flux in latest and established models = 1.45158 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 104 components and 1.45158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104461Jy sigma=1.490845 ! Fit after self-cal, rms=0.105011Jy sigma=1.482663 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.526 x 8.324 at 13.86 degrees (North through East) ! Clean map min=-0.0092382 max=1.0265 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105011Jy sigma=1.482663 ! Fit after self-cal, rms=0.096783Jy sigma=1.207868 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096783Jy sigma=1.207868 ! Fit after self-cal, rms=0.097258Jy sigma=1.206845 ! Inverting map and beam ! Estimated beam: bmin=3.545 mas, bmaj=8.337 mas, bpa=13.7 degrees ! Estimated noise=1.09327 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233122 Jy ! Component: 100 - total flux cleaned = -0.000463769 Jy ! Component: 150 - total flux cleaned = -0.000258562 Jy ! Component: 200 - total flux cleaned = -6.17304e-05 Jy ! Total flux subtracted in 200 components = -6.17304e-05 Jy ! Clean residual min=-0.008290 max=0.007674 Jy/beam ! Clean residual mean=-0.000002 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 1.45152 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 122 components and 1.45152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096136Jy sigma=1.183060 ! Fit after self-cal, rms=0.096345Jy sigma=1.181430 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096345Jy sigma=1.181430 ! Fit after self-cal, rms=0.094618Jy sigma=1.106720 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094618Jy sigma=1.106720 ! Fit after self-cal, rms=0.094735Jy sigma=1.106658 ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.337 mas, bpa=13.72 degrees ! Estimated noise=1.09337 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116498 Jy ! Component: 100 - total flux cleaned = -0.00185729 Jy ! Component: 150 - total flux cleaned = -0.00170059 Jy ! Component: 200 - total flux cleaned = -0.00156068 Jy ! Total flux subtracted in 200 components = -0.00156068 Jy ! Clean residual min=-0.007748 max=0.006976 Jy/beam ! Clean residual mean=-0.000007 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 1.44996 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 138 components and 1.44996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094024Jy sigma=1.092875 ! Fit after self-cal, rms=0.094057Jy sigma=1.092060 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=10.19 mas, bpa=14.5 degrees ! Estimated noise=1.36076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000612457 Jy ! Component: 100 - total flux cleaned = -0.00257979 Jy ! Component: 150 - total flux cleaned = -0.00337081 Jy ! Component: 200 - total flux cleaned = -0.00366149 Jy ! Total flux subtracted in 200 components = -0.00366149 Jy ! Clean residual min=-0.005486 max=0.005703 Jy/beam ! Clean residual mean=0.000003 rms=0.001626 Jy/beam ! Combined flux in latest and established models = 1.4463 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 1.4463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094068Jy sigma=1.091757 ! Fit after self-cal, rms=0.093978Jy sigma=1.090251 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.907 mas, bmaj=7.774 mas, bpa=16.59 degrees ! Estimated noise=1.50449 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.903956 Jy ! Component: 100 - total flux cleaned = 1.18467 Jy ! Component: 150 - total flux cleaned = 1.29406 Jy ! Component: 200 - total flux cleaned = 1.34582 Jy ! Total flux subtracted in 200 components = 1.34582 Jy ! Clean residual min=-0.015779 max=0.033816 Jy/beam ! Clean residual mean=0.000056 rms=0.005473 Jy/beam ! Combined flux in latest and established models = 1.34582 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.34582 Jy ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.337 mas, bpa=13.72 degrees ! Estimated noise=1.09337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 0.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0450537 Jy ! Component: 100 - total flux cleaned = 0.0686459 Jy ! Component: 150 - total flux cleaned = 0.0838013 Jy ! Component: 200 - total flux cleaned = 0.0912552 Jy ! Total flux subtracted in 200 components = 0.0912552 Jy ! Clean residual min=-0.007643 max=0.009294 Jy/beam ! Clean residual mean=0.000029 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 1.43708 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 59 components and 1.43708 Jy ! Inverting map ! Added new window around map position (-10.5, -41.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00670075 Jy ! Component: 100 - total flux cleaned = 0.00732861 Jy ! Component: 150 - total flux cleaned = 0.00758286 Jy ! Component: 200 - total flux cleaned = 0.00782229 Jy ! Total flux subtracted in 200 components = 0.00782229 Jy ! Clean residual min=-0.006614 max=0.006806 Jy/beam ! Clean residual mean=0.000007 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 1.4449 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 89 components and 1.4449 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.925 mas, bmaj=10.19 mas, bpa=14.5 degrees ! Estimated noise=1.36076 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (26, 15). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00810046 Jy ! Component: 100 - total flux cleaned = 0.0100525 Jy ! Component: 150 - total flux cleaned = 0.0123423 Jy ! Component: 200 - total flux cleaned = 0.0141928 Jy ! Total flux subtracted in 200 components = 0.0141928 Jy ! Clean residual min=-0.004159 max=0.003643 Jy/beam ! Clean residual mean=-0.000012 rms=0.001219 Jy/beam ! Combined flux in latest and established models = 1.4591 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 133 components and 1.4591 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=8.337 mas, bpa=13.72 degrees ! Estimated noise=1.09337 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103731 Jy ! Component: 100 - total flux cleaned = 0.00143431 Jy ! Component: 150 - total flux cleaned = 0.00196854 Jy ! Component: 200 - total flux cleaned = 0.00262732 Jy ! Total flux subtracted in 200 components = 0.00262732 Jy ! Clean residual min=-0.004904 max=0.003921 Jy/beam ! Clean residual mean=-0.000011 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 1.46172 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 172 components and 1.46172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090750Jy sigma=1.044738 ! Fit after self-cal, rms=0.090647Jy sigma=1.039338 wmodel J1310+3220_S_2006_02_14_yyk\_map.mod ! Writing 172 model components to file: J1310+3220_S_2006_02_14_yyk_map.mod wobs J1310+3220_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1310+3220_S_2006_02_14_yyk_uvs.fits wwins J1310+3220_S_2006_02_14_yyk\_map.win ! wwins: Wrote 6 windows to J1310+3220_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00125163 Jy ! Component: 100 - total flux cleaned = -0.00112326 Jy ! Component: 150 - total flux cleaned = -0.00118529 Jy ! Component: 200 - total flux cleaned = -0.00129813 Jy ! Component: 250 - total flux cleaned = -0.00150969 Jy ! Component: 300 - total flux cleaned = -0.00156151 Jy ! Component: 350 - total flux cleaned = -0.00141184 Jy ! Component: 400 - total flux cleaned = -0.00117329 Jy ! Component: 450 - total flux cleaned = -0.00108094 Jy ! Component: 500 - total flux cleaned = -0.000903066 Jy ! Component: 550 - total flux cleaned = -0.000902928 Jy ! Component: 600 - total flux cleaned = -0.000859947 Jy ! Component: 650 - total flux cleaned = -0.000818092 Jy ! Component: 700 - total flux cleaned = -0.000697723 Jy ! Component: 750 - total flux cleaned = -0.000580445 Jy ! Component: 800 - total flux cleaned = -0.000695947 Jy ! Component: 850 - total flux cleaned = -0.0005836 Jy ! Component: 900 - total flux cleaned = -0.000583429 Jy ! Component: 950 - total flux cleaned = -0.000547052 Jy ! Component: 1000 - total flux cleaned = -0.00051094 Jy ! Component: 1050 - total flux cleaned = -0.000510793 Jy ! Component: 1100 - total flux cleaned = -0.000649344 Jy ! Component: 1150 - total flux cleaned = -0.000717867 Jy ! Component: 1200 - total flux cleaned = -0.000784951 Jy ! Component: 1250 - total flux cleaned = -0.000851756 Jy ! Component: 1300 - total flux cleaned = -0.000949969 Jy ! Component: 1350 - total flux cleaned = -0.00101429 Jy ! Component: 1400 - total flux cleaned = -0.000950406 Jy ! Component: 1450 - total flux cleaned = -0.00104504 Jy ! Component: 1500 - total flux cleaned = -0.000982718 Jy ! Component: 1550 - total flux cleaned = -0.00110625 Jy ! Component: 1600 - total flux cleaned = -0.00122793 Jy ! Component: 1650 - total flux cleaned = -0.00122793 Jy ! Component: 1700 - total flux cleaned = -0.00119876 Jy ! Component: 1750 - total flux cleaned = -0.0012878 Jy ! Component: 1800 - total flux cleaned = -0.0013462 Jy ! Component: 1850 - total flux cleaned = -0.00140412 Jy ! Component: 1900 - total flux cleaned = -0.00151808 Jy ! Component: 1950 - total flux cleaned = -0.00154604 Jy ! Component: 2000 - total flux cleaned = -0.00160186 Jy ! Total flux subtracted in 2048 components = -0.00176691 Jy ! Clean residual min=-0.001802 max=0.001534 Jy/beam ! Clean residual mean=-0.000005 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 1.45996 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 285 components and 1.45996 Jy ![Exited script file: muppet] wmap "J1310+3220_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 8.337 at 13.72 degrees (North through East) ! Clean map min=-0.0033951 max=1.0237 Jy/beam ! Writing clean map to FITS file: J1310+3220_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.02375 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000552348 device "J1310+3220_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1310+3220_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.161861 0.161861 0.323721 0.647443 1.29489 2.58977 5.17954 10.3591 20.7182 41.4363 82.8727 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.023 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 8.337 at 13.72 degrees (North through East) ! Clean map min=-0.0033951 max=1.0237 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1310+3220_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1310+3220_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1310+3220_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:24:45 2006