! Started logfile: J1305+7854_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:18:52 2006 obs J1305+7854_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1305+7854_S_2006_02_23_yyk_uva.fits ! AN table 1: 881 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.993946 visibilities/baseline/integration-bin. ! Found source: J1305+7854 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2429 lines of history. ! ! Reading 157620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1305+7854_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.28946 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.303 mas, bmaj=10.41 mas, bpa=7.698 degrees ! Estimated noise=1.23062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.233365 Jy ! Component: 100 - total flux cleaned = 0.276581 Jy ! Total flux subtracted in 100 components = 0.276581 Jy ! Clean residual min=-0.007398 max=0.012559 Jy/beam ! Clean residual mean=0.000037 rms=0.002670 Jy/beam ! Combined flux in latest and established models = 0.276581 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.276581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070504Jy sigma=1.235976 ! Fit after self-cal, rms=0.070304Jy sigma=1.233156 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=10.74 mas, bpa=7.802 degrees ! Estimated noise=0.687556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183494 Jy ! Component: 100 - total flux cleaned = 0.0244875 Jy ! Component: 150 - total flux cleaned = 0.0271908 Jy ! Component: 200 - total flux cleaned = 0.0287143 Jy ! Total flux subtracted in 200 components = 0.0287143 Jy ! Clean residual min=-0.006005 max=0.007348 Jy/beam ! Clean residual mean=-0.000075 rms=0.001565 Jy/beam ! Combined flux in latest and established models = 0.305295 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 49 components and 0.305295 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066387Jy sigma=1.169628 ! Fit after self-cal, rms=0.066386Jy sigma=1.169365 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.141 x 10.74 at 7.802 degrees (North through East) ! Clean map min=-0.0056676 max=0.27615 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02088 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 0.97 KP 0.95 ! LA 1.19 MK 0.89 NL 0.95 OV 0.96 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990194 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.03 KP 1.00 ! LA 1.17 MK 0.99 NL 0.97 OV 0.98 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.970718 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.03 HN 1.02 KP 0.99 ! LA 0.93 MK 1.07 NL 1.04 OV 1.00 ! PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03332 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.97 KP 0.90 ! LA 0.80 MK 1.07 NL 0.97 OV 0.90 ! PT 0.95 SC 1.11 ! ! ! Fit before self-cal, rms=0.066386Jy sigma=1.169365 ! Fit after self-cal, rms=0.059895Jy sigma=1.062150 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059895Jy sigma=1.062150 ! Fit after self-cal, rms=0.059904Jy sigma=1.062082 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=10.72 mas, bpa=7.676 degrees ! Estimated noise=0.687555 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785156 Jy ! Component: 100 - total flux cleaned = 0.00101349 Jy ! Component: 150 - total flux cleaned = 0.00109217 Jy ! Component: 200 - total flux cleaned = 0.00112676 Jy ! Total flux subtracted in 200 components = 0.00112676 Jy ! Clean residual min=-0.002443 max=0.003018 Jy/beam ! Clean residual mean=0.000008 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.306422 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 65 components and 0.306422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059825Jy sigma=1.061119 ! Fit after self-cal, rms=0.059841Jy sigma=1.061113 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059841Jy sigma=1.061113 ! Fit after self-cal, rms=0.055586Jy sigma=0.989236 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588273 Jy ! Component: 100 - total flux cleaned = 0.000622418 Jy ! Component: 150 - total flux cleaned = 0.000652538 Jy ! Component: 200 - total flux cleaned = 0.00068058 Jy ! Total flux subtracted in 200 components = 0.000680581 Jy ! Clean residual min=-0.002269 max=0.003014 Jy/beam ! Clean residual mean=0.000009 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.307103 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 0.307103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055528Jy sigma=0.988629 ! Fit after self-cal, rms=0.055381Jy sigma=0.986075 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.183 x 10.72 at 7.676 degrees (North through East) ! Clean map min=-0.0021983 max=0.27844 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055381Jy sigma=0.986075 ! Fit after self-cal, rms=0.053328Jy sigma=0.949356 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053328Jy sigma=0.949356 ! Fit after self-cal, rms=0.053318Jy sigma=0.949143 ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=10.72 mas, bpa=7.625 degrees ! Estimated noise=0.686723 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000649294 Jy ! Component: 100 - total flux cleaned = -0.000617816 Jy ! Component: 150 - total flux cleaned = -0.000618316 Jy ! Component: 200 - total flux cleaned = -0.000593468 Jy ! Total flux subtracted in 200 components = -0.000593468 Jy ! Clean residual min=-0.002256 max=0.002814 Jy/beam ! Clean residual mean=0.000010 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.306509 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.306509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053278Jy sigma=0.948609 ! Fit after self-cal, rms=0.053276Jy sigma=0.948587 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053276Jy sigma=0.948587 ! Fit after self-cal, rms=0.052242Jy sigma=0.925857 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052242Jy sigma=0.925857 ! Fit after self-cal, rms=0.052242Jy sigma=0.925842 ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=10.71 mas, bpa=7.578 degrees ! Estimated noise=0.686671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276981 Jy ! Component: 100 - total flux cleaned = -0.000250001 Jy ! Component: 150 - total flux cleaned = -0.000251545 Jy ! Component: 200 - total flux cleaned = -0.000228399 Jy ! Total flux subtracted in 200 components = -0.000228399 Jy ! Clean residual min=-0.002278 max=0.002699 Jy/beam ! Clean residual mean=0.000010 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.306281 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 81 components and 0.306281 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052210Jy sigma=0.925420 ! Fit after self-cal, rms=0.052210Jy sigma=0.925417 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.41 mas, bmaj=11.8 mas, bpa=7.531 degrees ! Estimated noise=0.862508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101549 Jy ! Component: 100 - total flux cleaned = 0.00104152 Jy ! Component: 150 - total flux cleaned = 0.00104006 Jy ! Component: 200 - total flux cleaned = 0.00105717 Jy ! Total flux subtracted in 200 components = 0.00105717 Jy ! Clean residual min=-0.002599 max=0.002601 Jy/beam ! Clean residual mean=0.000015 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.307338 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 0.307338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052262Jy sigma=0.926012 ! Fit after self-cal, rms=0.052233Jy sigma=0.925492 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=10.37 mas, bpa=7.604 degrees ! Estimated noise=1.22271 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.232686 Jy ! Component: 100 - total flux cleaned = 0.272953 Jy ! Component: 150 - total flux cleaned = 0.288266 Jy ! Component: 200 - total flux cleaned = 0.294656 Jy ! Total flux subtracted in 200 components = 0.294656 Jy ! Clean residual min=-0.004662 max=0.004800 Jy/beam ! Clean residual mean=0.000019 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.294656 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.294656 Jy ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=10.71 mas, bpa=7.578 degrees ! Estimated noise=0.686671 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00667865 Jy ! Component: 100 - total flux cleaned = 0.0096707 Jy ! Component: 150 - total flux cleaned = 0.0109938 Jy ! Component: 200 - total flux cleaned = 0.0117687 Jy ! Total flux subtracted in 200 components = 0.0117687 Jy ! Clean residual min=-0.002061 max=0.002228 Jy/beam ! Clean residual mean=0.000008 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 0.306424 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 65 components and 0.306424 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.41 mas, bmaj=11.8 mas, bpa=7.531 degrees ! Estimated noise=0.862508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116592 Jy ! Component: 100 - total flux cleaned = 0.00146247 Jy ! Component: 150 - total flux cleaned = 0.00161322 Jy ! Component: 200 - total flux cleaned = 0.00174945 Jy ! Total flux subtracted in 200 components = 0.00174945 Jy ! Clean residual min=-0.002539 max=0.002738 Jy/beam ! Clean residual mean=0.000013 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.308174 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.308174 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=10.71 mas, bpa=7.578 degrees ! Estimated noise=0.686671 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336632 Jy ! Component: 100 - total flux cleaned = -0.000301195 Jy ! Component: 150 - total flux cleaned = -0.000301153 Jy ! Component: 200 - total flux cleaned = -0.000329586 Jy ! Total flux subtracted in 200 components = -0.000329586 Jy ! Clean residual min=-0.001975 max=0.002197 Jy/beam ! Clean residual mean=0.000008 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.307844 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 103 components and 0.307844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052009Jy sigma=0.921950 ! Fit after self-cal, rms=0.051999Jy sigma=0.921813 wmodel J1305+7854_S_2006_02_23_yyk\_map.mod ! Writing 103 model components to file: J1305+7854_S_2006_02_23_yyk_map.mod wobs J1305+7854_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1305+7854_S_2006_02_23_yyk_uvs.fits wwins J1305+7854_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1305+7854_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000243289 Jy ! Component: 100 - total flux cleaned = 0.000513103 Jy ! Component: 150 - total flux cleaned = 0.000761201 Jy ! Component: 200 - total flux cleaned = 0.000994819 Jy ! Component: 250 - total flux cleaned = 0.00107764 Jy ! Component: 300 - total flux cleaned = 0.00128533 Jy ! Component: 350 - total flux cleaned = 0.00141072 Jy ! Component: 400 - total flux cleaned = 0.00153145 Jy ! Component: 450 - total flux cleaned = 0.00155426 Jy ! Component: 500 - total flux cleaned = 0.00155448 Jy ! Component: 550 - total flux cleaned = 0.00159889 Jy ! Component: 600 - total flux cleaned = 0.00162052 Jy ! Component: 650 - total flux cleaned = 0.00172656 Jy ! Component: 700 - total flux cleaned = 0.00176784 Jy ! Component: 750 - total flux cleaned = 0.00180847 Jy ! Component: 800 - total flux cleaned = 0.00194797 Jy ! Component: 850 - total flux cleaned = 0.00200632 Jy ! Component: 900 - total flux cleaned = 0.00206398 Jy ! Component: 950 - total flux cleaned = 0.00212057 Jy ! Component: 1000 - total flux cleaned = 0.00219478 Jy ! Component: 1050 - total flux cleaned = 0.00226713 Jy ! Component: 1100 - total flux cleaned = 0.00228501 Jy ! Component: 1150 - total flux cleaned = 0.00235534 Jy ! Component: 1200 - total flux cleaned = 0.00242436 Jy ! Component: 1250 - total flux cleaned = 0.0024417 Jy ! Component: 1300 - total flux cleaned = 0.00254277 Jy ! Component: 1350 - total flux cleaned = 0.00255927 Jy ! Component: 1400 - total flux cleaned = 0.0026247 Jy ! Component: 1450 - total flux cleaned = 0.00265669 Jy ! Component: 1500 - total flux cleaned = 0.00264065 Jy ! Component: 1550 - total flux cleaned = 0.0026721 Jy ! Component: 1600 - total flux cleaned = 0.00275004 Jy ! Component: 1650 - total flux cleaned = 0.00284238 Jy ! Component: 1700 - total flux cleaned = 0.00287282 Jy ! Component: 1750 - total flux cleaned = 0.00290302 Jy ! Component: 1800 - total flux cleaned = 0.00305158 Jy ! Component: 1850 - total flux cleaned = 0.00311017 Jy ! Component: 1900 - total flux cleaned = 0.00316826 Jy ! Component: 1950 - total flux cleaned = 0.00326912 Jy ! Component: 2000 - total flux cleaned = 0.00336905 Jy ! Total flux subtracted in 2048 components = 0.00345404 Jy ! Clean residual min=-0.000847 max=0.001020 Jy/beam ! Clean residual mean=0.000006 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.311298 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 245 components and 0.311298 Jy ![Exited script file: muppet] wmap "J1305+7854_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 10.71 at 7.578 degrees (North through East) ! Clean map min=-0.0015945 max=0.27889 Jy/beam ! Writing clean map to FITS file: J1305+7854_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.278893 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00028768 device "J1305+7854_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1305+7854_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.309452 0.309452 0.618904 1.23781 2.47562 4.95123 9.90247 19.8049 39.6099 79.2198 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.278 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 10.71 at 7.578 degrees (North through East) ! Clean map min=-0.0015945 max=0.27889 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1305+7854_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1305+7854_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1305+7854_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:19:21 2006