! Started logfile: J1222+0413_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:11:26 2006 obs J1222+0413_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1222+0413_S_2006_02_23_yyk_uva.fits ! AN table 1: 220 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.832222 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 32956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1222+0413_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.583344 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.531 mas, bmaj=6.829 mas, bpa=-0.7929 degrees ! Estimated noise=1.88776 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.48242 Jy ! Component: 100 - total flux cleaned = 0.559052 Jy ! Total flux subtracted in 100 components = 0.559052 Jy ! Clean residual min=-0.016252 max=0.021924 Jy/beam ! Clean residual mean=-0.000038 rms=0.005174 Jy/beam ! Combined flux in latest and established models = 0.559052 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.559052 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.116423Jy sigma=1.595171 ! Fit after self-cal, rms=0.115520Jy sigma=1.588379 ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=6.826 mas, bpa=-0.8739 degrees ! Estimated noise=1.8845 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=7.782 mas, bpa=-1.536 degrees ! Estimated noise=1.47088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309317 Jy ! Component: 100 - total flux cleaned = 0.0436349 Jy ! Component: 150 - total flux cleaned = 0.0491532 Jy ! Component: 200 - total flux cleaned = 0.0497029 Jy ! Total flux subtracted in 200 components = 0.0497029 Jy ! Clean residual min=-0.011129 max=0.016903 Jy/beam ! Clean residual mean=-0.000232 rms=0.003792 Jy/beam ! Combined flux in latest and established models = 0.608755 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 53 components and 0.608755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106761Jy sigma=1.454973 ! Fit after self-cal, rms=0.106760Jy sigma=1.454407 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.139 x 7.782 at -1.536 degrees (North through East) ! Clean map min=-0.01061 max=0.55909 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01391 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.95 KP 0.98 ! LA 1.21 MK 0.91 NL 0.94 OV 0.97 ! PT 1.08 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990775 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 0.97 KP 0.98 ! LA 1.18 MK 0.97 NL 0.94 OV 0.99 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.98126 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.02 HN 1.02 KP 0.97 ! LA 0.95 MK 1.10 NL 1.03 OV 1.02 ! PT 1.08 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03015 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 0.94 KP 0.91 ! LA 0.81 MK 1.12 NL 0.96 OV 0.87 ! PT 0.96 SC 1.09 ! ! ! Fit before self-cal, rms=0.106760Jy sigma=1.454407 ! Fit after self-cal, rms=0.084146Jy sigma=1.049368 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084146Jy sigma=1.049368 ! Fit after self-cal, rms=0.084151Jy sigma=1.049331 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=7.832 mas, bpa=-1.615 degrees ! Estimated noise=1.47603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463972 Jy ! Component: 100 - total flux cleaned = 0.00605928 Jy ! Component: 150 - total flux cleaned = 0.00624495 Jy ! Component: 200 - total flux cleaned = 0.00635248 Jy ! Total flux subtracted in 200 components = 0.00635248 Jy ! Clean residual min=-0.004722 max=0.005597 Jy/beam ! Clean residual mean=-0.000019 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.615107 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.615108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083915Jy sigma=1.044633 ! Fit after self-cal, rms=0.083935Jy sigma=1.044347 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083935Jy sigma=1.044347 ! Fit after self-cal, rms=0.080088Jy sigma=0.996785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000714314 Jy ! Component: 100 - total flux cleaned = 0.000711632 Jy ! Component: 150 - total flux cleaned = 0.000710818 Jy ! Component: 200 - total flux cleaned = 0.000710515 Jy ! Total flux subtracted in 200 components = 0.000710515 Jy ! Clean residual min=-0.004698 max=0.005480 Jy/beam ! Clean residual mean=-0.000020 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.615818 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.615818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080009Jy sigma=0.995596 ! Fit after self-cal, rms=0.079748Jy sigma=0.991623 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 7.832 at -1.615 degrees (North through East) ! Clean map min=-0.0045108 max=0.56332 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079748Jy sigma=0.991623 ! Fit after self-cal, rms=0.077306Jy sigma=0.913873 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077306Jy sigma=0.913873 ! Fit after self-cal, rms=0.077350Jy sigma=0.913289 ! Inverting map and beam ! Estimated beam: bmin=3.183 mas, bmaj=7.822 mas, bpa=-1.709 degrees ! Estimated noise=1.47384 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000774654 Jy ! Component: 100 - total flux cleaned = 0.000824265 Jy ! Component: 150 - total flux cleaned = 0.000943223 Jy ! Component: 200 - total flux cleaned = 0.00104925 Jy ! Total flux subtracted in 200 components = 0.00104925 Jy ! Clean residual min=-0.004308 max=0.005332 Jy/beam ! Clean residual mean=-0.000011 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.616867 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 0.616867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077291Jy sigma=0.912204 ! Fit after self-cal, rms=0.077335Jy sigma=0.911967 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077335Jy sigma=0.911967 ! Fit after self-cal, rms=0.076731Jy sigma=0.890505 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076731Jy sigma=0.890505 ! Fit after self-cal, rms=0.076750Jy sigma=0.890471 ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.822 mas, bpa=-1.693 degrees ! Estimated noise=1.4746 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584489 Jy ! Component: 100 - total flux cleaned = 0.000616966 Jy ! Component: 150 - total flux cleaned = 0.000649092 Jy ! Component: 200 - total flux cleaned = 0.000678442 Jy ! Total flux subtracted in 200 components = 0.000678442 Jy ! Clean residual min=-0.004086 max=0.005326 Jy/beam ! Clean residual mean=-0.000011 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.617546 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 72 components and 0.617546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076704Jy sigma=0.889852 ! Fit after self-cal, rms=0.076722Jy sigma=0.889766 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.715 mas, bmaj=12.03 mas, bpa=-4.629 degrees ! Estimated noise=1.89489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448844 Jy ! Component: 100 - total flux cleaned = -0.00049394 Jy ! Component: 150 - total flux cleaned = -0.00052805 Jy ! Component: 200 - total flux cleaned = -0.000608649 Jy ! Total flux subtracted in 200 components = -0.000608649 Jy ! Clean residual min=-0.005277 max=0.006354 Jy/beam ! Clean residual mean=-0.000023 rms=0.001671 Jy/beam ! Combined flux in latest and established models = 0.616937 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 77 components and 0.616937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076672Jy sigma=0.889860 ! Fit after self-cal, rms=0.076671Jy sigma=0.889625 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.555 mas, bmaj=6.834 mas, bpa=-0.8382 degrees ! Estimated noise=1.88319 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.48274 Jy ! Component: 100 - total flux cleaned = 0.557429 Jy ! Component: 150 - total flux cleaned = 0.585714 Jy ! Component: 200 - total flux cleaned = 0.599801 Jy ! Total flux subtracted in 200 components = 0.599801 Jy ! Clean residual min=-0.006040 max=0.006634 Jy/beam ! Clean residual mean=0.000009 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 0.599801 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.599801 Jy ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.822 mas, bpa=-1.693 degrees ! Estimated noise=1.4746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948798 Jy ! Component: 100 - total flux cleaned = 0.0140948 Jy ! Component: 150 - total flux cleaned = 0.0157081 Jy ! Component: 200 - total flux cleaned = 0.0162386 Jy ! Total flux subtracted in 200 components = 0.0162386 Jy ! Clean residual min=-0.004098 max=0.005227 Jy/beam ! Clean residual mean=-0.000007 rms=0.001295 Jy/beam ! Combined flux in latest and established models = 0.616039 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 58 components and 0.61604 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.715 mas, bmaj=12.03 mas, bpa=-4.629 degrees ! Estimated noise=1.89489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000320362 Jy ! Component: 100 - total flux cleaned = 0.000371383 Jy ! Component: 150 - total flux cleaned = 0.000375532 Jy ! Component: 200 - total flux cleaned = 0.00040931 Jy ! Total flux subtracted in 200 components = 0.00040931 Jy ! Clean residual min=-0.005196 max=0.006354 Jy/beam ! Clean residual mean=-0.000022 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 0.616449 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 67 components and 0.616449 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.822 mas, bpa=-1.693 degrees ! Estimated noise=1.4746 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000127819 Jy ! Component: 100 - total flux cleaned = 0.000206764 Jy ! Component: 150 - total flux cleaned = 0.000363832 Jy ! Component: 200 - total flux cleaned = 0.00047027 Jy ! Total flux subtracted in 200 components = 0.00047027 Jy ! Clean residual min=-0.004047 max=0.005195 Jy/beam ! Clean residual mean=-0.000010 rms=0.001275 Jy/beam ! Combined flux in latest and established models = 0.616919 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.616919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076687Jy sigma=0.889034 ! Fit after self-cal, rms=0.076684Jy sigma=0.888960 wmodel J1222+0413_S_2006_02_23_yyk\_map.mod ! Writing 74 model components to file: J1222+0413_S_2006_02_23_yyk_map.mod wobs J1222+0413_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1222+0413_S_2006_02_23_yyk_uvs.fits wwins J1222+0413_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J1222+0413_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222121 Jy ! Component: 100 - total flux cleaned = 0.00291634 Jy ! Component: 150 - total flux cleaned = 0.0026365 Jy ! Component: 200 - total flux cleaned = 0.00236929 Jy ! Component: 250 - total flux cleaned = 0.00255796 Jy ! Component: 300 - total flux cleaned = 0.00273679 Jy ! Component: 350 - total flux cleaned = 0.00279377 Jy ! Component: 400 - total flux cleaned = 0.00268348 Jy ! Component: 450 - total flux cleaned = 0.00273664 Jy ! Component: 500 - total flux cleaned = 0.00289146 Jy ! Component: 550 - total flux cleaned = 0.00309057 Jy ! Component: 600 - total flux cleaned = 0.00333221 Jy ! Component: 650 - total flux cleaned = 0.00361445 Jy ! Component: 700 - total flux cleaned = 0.00384367 Jy ! Component: 750 - total flux cleaned = 0.00397709 Jy ! Component: 800 - total flux cleaned = 0.0040203 Jy ! Component: 850 - total flux cleaned = 0.00419098 Jy ! Component: 900 - total flux cleaned = 0.00414904 Jy ! Component: 950 - total flux cleaned = 0.00423171 Jy ! Component: 1000 - total flux cleaned = 0.00439299 Jy ! Component: 1050 - total flux cleaned = 0.00451103 Jy ! Component: 1100 - total flux cleaned = 0.00451039 Jy ! Component: 1150 - total flux cleaned = 0.00447272 Jy ! Component: 1200 - total flux cleaned = 0.00451115 Jy ! Component: 1250 - total flux cleaned = 0.00451097 Jy ! Component: 1300 - total flux cleaned = 0.00447504 Jy ! Component: 1350 - total flux cleaned = 0.00443972 Jy ! Component: 1400 - total flux cleaned = 0.00450944 Jy ! Component: 1450 - total flux cleaned = 0.00461228 Jy ! Component: 1500 - total flux cleaned = 0.00454451 Jy ! Component: 1550 - total flux cleaned = 0.00461156 Jy ! Component: 1600 - total flux cleaned = 0.00467725 Jy ! Component: 1650 - total flux cleaned = 0.00461275 Jy ! Component: 1700 - total flux cleaned = 0.00458082 Jy ! Component: 1750 - total flux cleaned = 0.00458098 Jy ! Component: 1800 - total flux cleaned = 0.00454996 Jy ! Component: 1850 - total flux cleaned = 0.00448861 Jy ! Component: 1900 - total flux cleaned = 0.00451868 Jy ! Component: 1950 - total flux cleaned = 0.00448878 Jy ! Component: 2000 - total flux cleaned = 0.00442999 Jy ! Total flux subtracted in 2048 components = 0.00440075 Jy ! Clean residual min=-0.002113 max=0.001995 Jy/beam ! Clean residual mean=0.000005 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.62132 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 212 components and 0.62132 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.822 at -1.693 degrees (North through East) ! Clean map min=-0.0028327 max=0.56315 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.563149 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554166 device "J1222+0413_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1222+0413_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.295214 0.295214 0.590428 1.18086 2.36171 4.72343 9.44685 18.8937 37.7874 75.5748 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.563 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.822 at -1.693 degrees (North through East) ! Clean map min=-0.0028327 max=0.56315 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1222+0413_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1222+0413_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1222+0413_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:12:04 2006