! Started logfile: J1222+0413_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:10:37 2006 obs J1222+0413_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1222+0413_S_2006_02_14_yyk_uva.fits ! AN table 1: 315 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.562963 visibilities/baseline/integration-bin. ! Found source: J1222+0413 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 31920 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1222+0413_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.613389 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.63 mas, bpa=-0.4804 degrees ! Estimated noise=1.78186 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.5081 Jy ! Component: 100 - total flux cleaned = 0.587251 Jy ! Total flux subtracted in 100 components = 0.587251 Jy ! Clean residual min=-0.014760 max=0.020466 Jy/beam ! Clean residual mean=0.000010 rms=0.004938 Jy/beam ! Combined flux in latest and established models = 0.587251 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.587251 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.113012Jy sigma=1.691772 ! Fit after self-cal, rms=0.112719Jy sigma=1.686388 ! Inverting map and beam ! Estimated beam: bmin=2.556 mas, bmaj=6.63 mas, bpa=-0.4804 degrees ! Estimated noise=1.78186 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=7.177 mas, bpa=-3.211 degrees ! Estimated noise=1.48189 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294244 Jy ! Component: 100 - total flux cleaned = 0.0423416 Jy ! Component: 150 - total flux cleaned = 0.0474224 Jy ! Component: 200 - total flux cleaned = 0.047914 Jy ! Total flux subtracted in 200 components = 0.047914 Jy ! Clean residual min=-0.011528 max=0.015678 Jy/beam ! Clean residual mean=-0.000107 rms=0.003607 Jy/beam ! Combined flux in latest and established models = 0.635165 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 44 components and 0.635165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104104Jy sigma=1.567704 ! Fit after self-cal, rms=0.103982Jy sigma=1.566778 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.848 x 7.177 at -3.211 degrees (North through East) ! Clean map min=-0.010638 max=0.58305 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998431 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 0.95 KP 0.96 ! LA 1.22 MK 0.90 NL 0.95 OV 0.98 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.984882 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.02 HN 1.00 KP 0.99 ! LA 1.19 MK 0.98 NL 0.97 OV 1.00 ! PT 1.01 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.991569 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00 HN 1.01 KP 0.99 ! LA 0.92 MK 1.12 NL 1.03 OV 1.03 ! PT 1.09 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03513 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.93 KP 0.89 ! LA 0.80 MK 1.14 NL 0.95 OV 0.89 ! PT 0.92 SC 1.11 ! ! ! Fit before self-cal, rms=0.103982Jy sigma=1.566778 ! Fit after self-cal, rms=0.074942Jy sigma=1.135115 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074942Jy sigma=1.135115 ! Fit after self-cal, rms=0.074942Jy sigma=1.135062 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.892 mas, bmaj=7.256 mas, bpa=-3.155 degrees ! Estimated noise=1.48172 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00182009 Jy ! Component: 100 - total flux cleaned = -0.00141726 Jy ! Component: 150 - total flux cleaned = -0.00123612 Jy ! Component: 200 - total flux cleaned = -0.00108634 Jy ! Total flux subtracted in 200 components = -0.00108634 Jy ! Clean residual min=-0.005529 max=0.006174 Jy/beam ! Clean residual mean=0.000028 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.634079 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.634078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074561Jy sigma=1.131092 ! Fit after self-cal, rms=0.074494Jy sigma=1.130750 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074494Jy sigma=1.130750 ! Fit after self-cal, rms=0.071717Jy sigma=1.073408 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000319516 Jy ! Component: 100 - total flux cleaned = 0.000454258 Jy ! Component: 150 - total flux cleaned = 0.00052876 Jy ! Component: 200 - total flux cleaned = 0.000562173 Jy ! Total flux subtracted in 200 components = 0.000562173 Jy ! Clean residual min=-0.005448 max=0.005945 Jy/beam ! Clean residual mean=0.000027 rms=0.001556 Jy/beam ! Combined flux in latest and established models = 0.634641 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.63464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071640Jy sigma=1.072207 ! Fit after self-cal, rms=0.071475Jy sigma=1.068822 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.892 x 7.256 at -3.155 degrees (North through East) ! Clean map min=-0.0054866 max=0.58572 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071475Jy sigma=1.068822 ! Fit after self-cal, rms=0.068801Jy sigma=0.990503 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068801Jy sigma=0.990503 ! Fit after self-cal, rms=0.068804Jy sigma=0.990279 ! Inverting map and beam ! Estimated beam: bmin=2.9 mas, bmaj=7.264 mas, bpa=-3.129 degrees ! Estimated noise=1.48107 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00129905 Jy ! Component: 100 - total flux cleaned = -0.00145332 Jy ! Component: 150 - total flux cleaned = -0.00154327 Jy ! Component: 200 - total flux cleaned = -0.00159656 Jy ! Total flux subtracted in 200 components = -0.00159656 Jy ! Clean residual min=-0.004699 max=0.005417 Jy/beam ! Clean residual mean=0.000027 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 0.633044 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.633044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068754Jy sigma=0.989382 ! Fit after self-cal, rms=0.068726Jy sigma=0.989222 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068726Jy sigma=0.989222 ! Fit after self-cal, rms=0.059409Jy sigma=0.931743 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059409Jy sigma=0.931743 ! Fit after self-cal, rms=0.059413Jy sigma=0.931731 ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.286 mas, bpa=-3.194 degrees ! Estimated noise=1.48264 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000198718 Jy ! Component: 100 - total flux cleaned = -0.000277399 Jy ! Component: 150 - total flux cleaned = -0.000279761 Jy ! Component: 200 - total flux cleaned = -0.000278716 Jy ! Total flux subtracted in 200 components = -0.000278716 Jy ! Clean residual min=-0.004860 max=0.005383 Jy/beam ! Clean residual mean=0.000023 rms=0.001335 Jy/beam ! Combined flux in latest and established models = 0.632765 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.632765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059344Jy sigma=0.930955 ! Fit after self-cal, rms=0.059319Jy sigma=0.930873 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.058 mas, bmaj=11.58 mas, bpa=-2.051 degrees ! Estimated noise=1.98551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000963031 Jy ! Component: 100 - total flux cleaned = -0.000990173 Jy ! Component: 150 - total flux cleaned = -0.00101064 Jy ! Component: 200 - total flux cleaned = -0.00104795 Jy ! Total flux subtracted in 200 components = -0.00104795 Jy ! Clean residual min=-0.005668 max=0.005437 Jy/beam ! Clean residual mean=0.000052 rms=0.001838 Jy/beam ! Combined flux in latest and established models = 0.631717 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.631717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059316Jy sigma=0.931087 ! Fit after self-cal, rms=0.059264Jy sigma=0.930732 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=6.687 mas, bpa=-0.3232 degrees ! Estimated noise=1.78243 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.508617 Jy ! Component: 100 - total flux cleaned = 0.586044 Jy ! Component: 150 - total flux cleaned = 0.609918 Jy ! Component: 200 - total flux cleaned = 0.62149 Jy ! Total flux subtracted in 200 components = 0.62149 Jy ! Clean residual min=-0.006048 max=0.007272 Jy/beam ! Clean residual mean=0.000030 rms=0.001772 Jy/beam ! Combined flux in latest and established models = 0.62149 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.62149 Jy ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.286 mas, bpa=-3.194 degrees ! Estimated noise=1.48264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -7). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894553 Jy ! Component: 100 - total flux cleaned = 0.0120123 Jy ! Component: 150 - total flux cleaned = 0.0124157 Jy ! Component: 200 - total flux cleaned = 0.0125231 Jy ! Total flux subtracted in 200 components = 0.0125231 Jy ! Clean residual min=-0.005109 max=0.005439 Jy/beam ! Clean residual mean=0.000025 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 0.634013 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 62 components and 0.634013 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.058 mas, bmaj=11.58 mas, bpa=-2.051 degrees ! Estimated noise=1.98551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 3.93832e-05 Jy ! Component: 100 - total flux cleaned = 3.91328e-05 Jy ! Component: 150 - total flux cleaned = -9.88177e-05 Jy ! Component: 200 - total flux cleaned = -0.000217162 Jy ! Total flux subtracted in 200 components = -0.000217162 Jy ! Clean residual min=-0.005515 max=0.005299 Jy/beam ! Clean residual mean=0.000053 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.633796 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.633796 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.904 mas, bmaj=7.286 mas, bpa=-3.194 degrees ! Estimated noise=1.48264 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126022 Jy ! Component: 100 - total flux cleaned = 3.51639e-05 Jy ! Component: 150 - total flux cleaned = -4.09202e-05 Jy ! Component: 200 - total flux cleaned = -0.000106587 Jy ! Total flux subtracted in 200 components = -0.000106587 Jy ! Clean residual min=-0.005042 max=0.005241 Jy/beam ! Clean residual mean=0.000026 rms=0.001302 Jy/beam ! Combined flux in latest and established models = 0.63369 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 0.63369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059219Jy sigma=0.928869 ! Fit after self-cal, rms=0.059177Jy sigma=0.928435 wmodel J1222+0413_S_2006_02_14_yyk\_map.mod ! Writing 98 model components to file: J1222+0413_S_2006_02_14_yyk_map.mod wobs J1222+0413_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1222+0413_S_2006_02_14_yyk_uvs.fits wwins J1222+0413_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1222+0413_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000770314 Jy ! Component: 100 - total flux cleaned = 0.00142137 Jy ! Component: 150 - total flux cleaned = 0.0019479 Jy ! Component: 200 - total flux cleaned = 0.00236504 Jy ! Component: 250 - total flux cleaned = 0.00262834 Jy ! Component: 300 - total flux cleaned = 0.00306221 Jy ! Component: 350 - total flux cleaned = 0.00347391 Jy ! Component: 400 - total flux cleaned = 0.00358654 Jy ! Component: 450 - total flux cleaned = 0.00358701 Jy ! Component: 500 - total flux cleaned = 0.0035351 Jy ! Component: 550 - total flux cleaned = 0.00358644 Jy ! Component: 600 - total flux cleaned = 0.00368542 Jy ! Component: 650 - total flux cleaned = 0.00382888 Jy ! Component: 700 - total flux cleaned = 0.00373701 Jy ! Component: 750 - total flux cleaned = 0.0036463 Jy ! Component: 800 - total flux cleaned = 0.00360257 Jy ! Component: 850 - total flux cleaned = 0.00360141 Jy ! Component: 900 - total flux cleaned = 0.00343498 Jy ! Component: 950 - total flux cleaned = 0.00331337 Jy ! Component: 1000 - total flux cleaned = 0.00323387 Jy ! Component: 1050 - total flux cleaned = 0.00311768 Jy ! Component: 1100 - total flux cleaned = 0.00304242 Jy ! Component: 1150 - total flux cleaned = 0.00285894 Jy ! Component: 1200 - total flux cleaned = 0.00293129 Jy ! Component: 1250 - total flux cleaned = 0.00293043 Jy ! Component: 1300 - total flux cleaned = 0.00289588 Jy ! Component: 1350 - total flux cleaned = 0.00282804 Jy ! Component: 1400 - total flux cleaned = 0.0026267 Jy ! Component: 1450 - total flux cleaned = 0.0024615 Jy ! Component: 1500 - total flux cleaned = 0.00236455 Jy ! Component: 1550 - total flux cleaned = 0.0021097 Jy ! Component: 1600 - total flux cleaned = 0.00204761 Jy ! Component: 1650 - total flux cleaned = 0.00186325 Jy ! Component: 1700 - total flux cleaned = 0.00183362 Jy ! Component: 1750 - total flux cleaned = 0.00171357 Jy ! Component: 1800 - total flux cleaned = 0.00150762 Jy ! Component: 1850 - total flux cleaned = 0.00147889 Jy ! Component: 1900 - total flux cleaned = 0.00133679 Jy ! Component: 1950 - total flux cleaned = 0.00130869 Jy ! Component: 2000 - total flux cleaned = 0.00119789 Jy ! Total flux subtracted in 2048 components = 0.00106204 Jy ! Clean residual min=-0.001441 max=0.001815 Jy/beam ! Clean residual mean=0.000002 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.634752 Jy keep ! Adding 143 model components to the UV plane model. ! The established model now contains 241 components and 0.634752 Jy ![Exited script file: muppet] wmap "J1222+0413_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.904 x 7.286 at -3.194 degrees (North through East) ! Clean map min=-0.0029375 max=0.58917 Jy/beam ! Writing clean map to FITS file: J1222+0413_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.589169 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000515011 device "J1222+0413_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1222+0413_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.262239 0.262239 0.524479 1.04896 2.09792 4.19583 8.39166 16.7833 33.5667 67.1333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.589 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.904 x 7.286 at -3.194 degrees (North through East) ! Clean map min=-0.0029375 max=0.58917 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1222+0413_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1222+0413_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1222+0413_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:11:00 2006