! Started logfile: J1159+2914_X_2006_02_23_yyk_uvs.log on Wed Jul 5 12:09:47 2006 obs J1159+2914_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1159+2914_X_2006_02_23_yyk_uva.fits ! AN table 1: 250 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.740178 visibilities/baseline/integration-bin. ! Found source: J1159+2914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2397 lines of history. ! ! Reading 33308 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1159+2914_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.06467 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7439 mas, bmaj=2.186 mas, bpa=-24.65 degrees ! Estimated noise=2.02563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.897887 Jy ! Component: 100 - total flux cleaned = 1.02385 Jy ! Total flux subtracted in 100 components = 1.02385 Jy ! Clean residual min=-0.029595 max=0.032569 Jy/beam ! Clean residual mean=-0.000053 rms=0.007599 Jy/beam ! Combined flux in latest and established models = 1.02385 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.02385 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.187706Jy sigma=2.517388 ! Fit after self-cal, rms=0.189098Jy sigma=2.498214 ! Inverting map and beam ! Estimated beam: bmin=0.7439 mas, bmaj=2.186 mas, bpa=-24.65 degrees ! Estimated noise=2.02563 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9189 mas, bmaj=2.369 mas, bpa=-24.73 degrees ! Estimated noise=1.42516 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0522589 Jy ! Component: 100 - total flux cleaned = 0.0740637 Jy ! Component: 150 - total flux cleaned = 0.0864894 Jy ! Component: 200 - total flux cleaned = 0.0942298 Jy ! Total flux subtracted in 200 components = 0.0942298 Jy ! Clean residual min=-0.022966 max=0.024173 Jy/beam ! Clean residual mean=0.000062 rms=0.006187 Jy/beam ! Combined flux in latest and established models = 1.11808 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 37 components and 1.11808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180367Jy sigma=2.265598 ! Fit after self-cal, rms=0.180150Jy sigma=2.263858 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9189 x 2.369 at -24.73 degrees (North through East) ! Clean map min=-0.021979 max=1.0523 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.990334 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.06 HN 1.05 KP 0.99 ! LA 1.01 MK 1.01 NL 1.02 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00614 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.06 KP 0.92 ! LA 0.96 MK 0.98 NL 1.00 OV 0.97 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00317 ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.10 HN 0.95 KP 0.85 ! LA 0.97 MK 1.01 NL 0.98 OV 0.98 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.989022 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.14 HN 0.97 KP 0.87 ! LA 0.96 MK 1.03 NL 0.98 OV 1.01 ! PT 1.11 SC 1.02 ! ! ! Fit before self-cal, rms=0.180150Jy sigma=2.263858 ! Fit after self-cal, rms=0.161367Jy sigma=1.885646 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161367Jy sigma=1.885646 ! Fit after self-cal, rms=0.161251Jy sigma=1.885568 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.925 mas, bmaj=2.375 mas, bpa=-24.84 degrees ! Estimated noise=1.41651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0044589 Jy ! Component: 100 - total flux cleaned = -0.00482877 Jy ! Component: 150 - total flux cleaned = -0.0049619 Jy ! Component: 200 - total flux cleaned = -0.00495813 Jy ! Total flux subtracted in 200 components = -0.00495813 Jy ! Clean residual min=-0.009785 max=0.012432 Jy/beam ! Clean residual mean=-0.000001 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 1.11312 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 1.11312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160985Jy sigma=1.878533 ! Fit after self-cal, rms=0.160814Jy sigma=1.878203 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160814Jy sigma=1.878203 ! Fit after self-cal, rms=0.094305Jy sigma=1.150894 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00161871 Jy ! Component: 100 - total flux cleaned = -0.00240482 Jy ! Component: 150 - total flux cleaned = -0.00289507 Jy ! Component: 200 - total flux cleaned = -0.00289075 Jy ! Total flux subtracted in 200 components = -0.00289075 Jy ! Clean residual min=-0.009579 max=0.011576 Jy/beam ! Clean residual mean=-0.000015 rms=0.002896 Jy/beam ! Combined flux in latest and established models = 1.11023 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 1.11023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093891Jy sigma=1.142125 ! Fit after self-cal, rms=0.084005Jy sigma=1.068469 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.925 x 2.375 at -24.84 degrees (North through East) ! Clean map min=-0.0091552 max=1.0496 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084005Jy sigma=1.068469 ! Fit after self-cal, rms=0.082050Jy sigma=1.025444 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082050Jy sigma=1.025444 ! Fit after self-cal, rms=0.081012Jy sigma=1.019277 ! Inverting map and beam ! Estimated beam: bmin=0.9238 mas, bmaj=2.371 mas, bpa=-24.73 degrees ! Estimated noise=1.41446 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114445 Jy ! Component: 100 - total flux cleaned = 0.00145947 Jy ! Component: 150 - total flux cleaned = 0.00152292 Jy ! Component: 200 - total flux cleaned = 0.00152296 Jy ! Total flux subtracted in 200 components = 0.00152296 Jy ! Clean residual min=-0.009289 max=0.011143 Jy/beam ! Clean residual mean=-0.000009 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 1.11175 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 1.11175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080906Jy sigma=1.016895 ! Fit after self-cal, rms=0.080717Jy sigma=1.016063 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080717Jy sigma=1.016063 ! Fit after self-cal, rms=0.079722Jy sigma=0.998798 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079722Jy sigma=0.998798 ! Fit after self-cal, rms=0.079700Jy sigma=0.998756 ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=2.371 mas, bpa=-24.75 degrees ! Estimated noise=1.4151 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011738 Jy ! Component: 100 - total flux cleaned = 0.00134846 Jy ! Component: 150 - total flux cleaned = 0.00135043 Jy ! Component: 200 - total flux cleaned = 0.00130742 Jy ! Total flux subtracted in 200 components = 0.00130742 Jy ! Clean residual min=-0.009286 max=0.011098 Jy/beam ! Clean residual mean=-0.000012 rms=0.002792 Jy/beam ! Combined flux in latest and established models = 1.11306 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 1.11306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079633Jy sigma=0.997426 ! Fit after self-cal, rms=0.079610Jy sigma=0.997254 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=2.83 mas, bpa=-23.55 degrees ! Estimated noise=1.76145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000814543 Jy ! Component: 100 - total flux cleaned = 0.000736303 Jy ! Component: 150 - total flux cleaned = 0.000675366 Jy ! Component: 200 - total flux cleaned = 0.000630468 Jy ! Total flux subtracted in 200 components = 0.000630468 Jy ! Clean residual min=-0.013383 max=0.015825 Jy/beam ! Clean residual mean=-0.000031 rms=0.005112 Jy/beam ! Combined flux in latest and established models = 1.11369 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 73 components and 1.11369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079664Jy sigma=0.997410 ! Fit after self-cal, rms=0.079645Jy sigma=0.997106 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7473 mas, bmaj=2.195 mas, bpa=-24.73 degrees ! Estimated noise=2.01462 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.901035 Jy ! Component: 100 - total flux cleaned = 1.02677 Jy ! Component: 150 - total flux cleaned = 1.06317 Jy ! Component: 200 - total flux cleaned = 1.0809 Jy ! Total flux subtracted in 200 components = 1.0809 Jy ! Clean residual min=-0.010307 max=0.010163 Jy/beam ! Clean residual mean=-0.000033 rms=0.002633 Jy/beam ! Combined flux in latest and established models = 1.0809 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.0809 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=2.371 mas, bpa=-24.75 degrees ! Estimated noise=1.4151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162229 Jy ! Component: 100 - total flux cleaned = 0.0230507 Jy ! Component: 150 - total flux cleaned = 0.0259617 Jy ! Component: 200 - total flux cleaned = 0.0280946 Jy ! Total flux subtracted in 200 components = 0.0280946 Jy ! Clean residual min=-0.009021 max=0.011285 Jy/beam ! Clean residual mean=-0.000025 rms=0.002888 Jy/beam ! Combined flux in latest and established models = 1.10899 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 37 components and 1.10899 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.156 mas, bmaj=2.83 mas, bpa=-23.55 degrees ! Estimated noise=1.76145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395739 Jy ! Component: 100 - total flux cleaned = 0.00467098 Jy ! Component: 150 - total flux cleaned = 0.0046767 Jy ! Component: 200 - total flux cleaned = 0.00476246 Jy ! Total flux subtracted in 200 components = 0.00476246 Jy ! Clean residual min=-0.013737 max=0.016314 Jy/beam ! Clean residual mean=-0.000028 rms=0.005240 Jy/beam ! Combined flux in latest and established models = 1.11376 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 1.11376 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9235 mas, bmaj=2.371 mas, bpa=-24.75 degrees ! Estimated noise=1.4151 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164636 Jy ! Component: 100 - total flux cleaned = -0.000132544 Jy ! Component: 150 - total flux cleaned = -0.000257529 Jy ! Component: 200 - total flux cleaned = -0.000313219 Jy ! Total flux subtracted in 200 components = -0.000313219 Jy ! Clean residual min=-0.009307 max=0.011557 Jy/beam ! Clean residual mean=-0.000008 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 1.11344 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 1.11344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079620Jy sigma=0.999100 ! Fit after self-cal, rms=0.079588Jy sigma=0.998566 wmodel J1159+2914_X_2006_02_23_yyk\_map.mod ! Writing 54 model components to file: J1159+2914_X_2006_02_23_yyk_map.mod wobs J1159+2914_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1159+2914_X_2006_02_23_yyk_uvs.fits wwins J1159+2914_X_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J1159+2914_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377042 Jy ! Component: 100 - total flux cleaned = 0.00490986 Jy ! Component: 150 - total flux cleaned = 0.00562466 Jy ! Component: 200 - total flux cleaned = 0.00639025 Jy ! Component: 250 - total flux cleaned = 0.00696942 Jy ! Component: 300 - total flux cleaned = 0.00773068 Jy ! Component: 350 - total flux cleaned = 0.00824256 Jy ! Component: 400 - total flux cleaned = 0.00824192 Jy ! Component: 450 - total flux cleaned = 0.00824055 Jy ! Component: 500 - total flux cleaned = 0.00832669 Jy ! Component: 550 - total flux cleaned = 0.0082428 Jy ! Component: 600 - total flux cleaned = 0.00816327 Jy ! Component: 650 - total flux cleaned = 0.00800981 Jy ! Component: 700 - total flux cleaned = 0.00801168 Jy ! Component: 750 - total flux cleaned = 0.00793936 Jy ! Component: 800 - total flux cleaned = 0.00793737 Jy ! Component: 850 - total flux cleaned = 0.00793703 Jy ! Component: 900 - total flux cleaned = 0.00780883 Jy ! Component: 950 - total flux cleaned = 0.00774776 Jy ! Component: 1000 - total flux cleaned = 0.00768923 Jy ! Component: 1050 - total flux cleaned = 0.00757296 Jy ! Component: 1100 - total flux cleaned = 0.00751392 Jy ! Component: 1150 - total flux cleaned = 0.00745732 Jy ! Component: 1200 - total flux cleaned = 0.00734853 Jy ! Component: 1250 - total flux cleaned = 0.00734958 Jy ! Component: 1300 - total flux cleaned = 0.00740046 Jy ! Component: 1350 - total flux cleaned = 0.00755032 Jy ! Component: 1400 - total flux cleaned = 0.00745293 Jy ! Component: 1450 - total flux cleaned = 0.00759737 Jy ! Component: 1500 - total flux cleaned = 0.00769099 Jy ! Component: 1550 - total flux cleaned = 0.00773568 Jy ! Component: 1600 - total flux cleaned = 0.00782462 Jy ! Component: 1650 - total flux cleaned = 0.00800019 Jy ! Component: 1700 - total flux cleaned = 0.0081279 Jy ! Component: 1750 - total flux cleaned = 0.00825456 Jy ! Component: 1800 - total flux cleaned = 0.00842002 Jy ! Component: 1850 - total flux cleaned = 0.00850091 Jy ! Component: 1900 - total flux cleaned = 0.00858128 Jy ! Component: 1950 - total flux cleaned = 0.00865995 Jy ! Component: 2000 - total flux cleaned = 0.00877509 Jy ! Total flux subtracted in 2048 components = 0.00888842 Jy ! Clean residual min=-0.001901 max=0.002201 Jy/beam ! Clean residual mean=-0.000011 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.12233 Jy keep ! Adding 162 model components to the UV plane model. ! The established model now contains 216 components and 1.12233 Jy ![Exited script file: muppet] wmap "J1159+2914_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9235 x 2.371 at -24.75 degrees (North through East) ! Clean map min=-0.005519 max=1.0484 Jy/beam ! Writing clean map to FITS file: J1159+2914_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.04839 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000747654 device "J1159+2914_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1159+2914_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.213944 0.213944 0.427888 0.855776 1.71155 3.4231 6.84621 13.6924 27.3848 54.7697 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.048 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9235 x 2.371 at -24.75 degrees (North through East) ! Clean map min=-0.005519 max=1.0484 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1159+2914_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1159+2914_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1159+2914_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:10:11 2006