! Started logfile: J1159+2914_S_2006_02_16_yyk_uvs.log on Wed Jul 5 12:08:00 2006 obs J1159+2914_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1159+2914_S_2006_02_16_yyk_uva.fits ! AN table 1: 250 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6288 visibilities/baseline/integration-bin. ! Found source: J1159+2914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 28296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1159+2914_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.552059 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=7.839 mas, bpa=-24.71 degrees ! Estimated noise=2.10484 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.419307 Jy ! Component: 100 - total flux cleaned = 0.538535 Jy ! Total flux subtracted in 100 components = 0.538535 Jy ! Clean residual min=-0.025437 max=0.054212 Jy/beam ! Clean residual mean=-0.000021 rms=0.009820 Jy/beam ! Combined flux in latest and established models = 0.538535 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.538535 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.178334Jy sigma=2.614251 ! Fit after self-cal, rms=0.177367Jy sigma=2.593636 ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=7.839 mas, bpa=-24.71 degrees ! Estimated noise=2.10484 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.077 mas, bmaj=8.615 mas, bpa=-25.7 degrees ! Estimated noise=1.53709 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0815465 Jy ! Component: 100 - total flux cleaned = 0.125258 Jy ! Component: 150 - total flux cleaned = 0.152222 Jy ! Component: 200 - total flux cleaned = 0.169607 Jy ! Total flux subtracted in 200 components = 0.169607 Jy ! Clean residual min=-0.023660 max=0.045011 Jy/beam ! Clean residual mean=-0.000076 rms=0.007945 Jy/beam ! Combined flux in latest and established models = 0.708142 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 57 components and 0.708142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141613Jy sigma=1.992544 ! Fit after self-cal, rms=0.141443Jy sigma=1.983532 ! Inverting map ! Added new window around map position (5, 9). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445713 Jy ! Component: 100 - total flux cleaned = 0.0575115 Jy ! Component: 150 - total flux cleaned = 0.0645643 Jy ! Component: 200 - total flux cleaned = 0.0697629 Jy ! Total flux subtracted in 200 components = 0.0697628 Jy ! Clean residual min=-0.019147 max=0.022178 Jy/beam ! Clean residual mean=-0.000120 rms=0.005250 Jy/beam ! Combined flux in latest and established models = 0.777905 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 103 components and 0.777905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127854Jy sigma=1.727805 ! Fit after self-cal, rms=0.126398Jy sigma=1.709495 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.077 x 8.615 at -25.7 degrees (North through East) ! Clean map min=-0.016199 max=0.46544 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.973083 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.93 HN 1.01 KP 0.95 ! LA 1.23 MK 0.94 NL 1.02 OV 0.99 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.971879 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.04 KP 0.97 ! LA 1.19 MK 0.99 NL 1.04 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01071 ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.97 HN 1.01 KP 0.95 ! LA 0.93 MK 1.01 NL 1.07 OV 1.03 ! PT 1.03 SC 1.05 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.07734 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 HN 0.94 KP 0.88 ! LA 0.80 MK 1.00 NL 0.95 OV 0.87 ! PT 0.93 SC 1.09 ! ! ! Fit before self-cal, rms=0.126398Jy sigma=1.709495 ! Fit after self-cal, rms=0.103752Jy sigma=1.352836 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103752Jy sigma=1.352836 ! Fit after self-cal, rms=0.103817Jy sigma=1.352361 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=8.614 mas, bpa=-26.06 degrees ! Estimated noise=1.53429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114529 Jy ! Component: 100 - total flux cleaned = 0.0157652 Jy ! Component: 150 - total flux cleaned = 0.0167607 Jy ! Component: 200 - total flux cleaned = 0.0172013 Jy ! Total flux subtracted in 200 components = 0.0172013 Jy ! Clean residual min=-0.010661 max=0.012355 Jy/beam ! Clean residual mean=-0.000010 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.795106 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 124 components and 0.795106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102215Jy sigma=1.322641 ! Fit after self-cal, rms=0.101868Jy sigma=1.318532 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101868Jy sigma=1.318532 ! Fit after self-cal, rms=0.098298Jy sigma=1.258968 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340567 Jy ! Component: 100 - total flux cleaned = 0.00556146 Jy ! Component: 150 - total flux cleaned = 0.00649139 Jy ! Component: 200 - total flux cleaned = 0.00683189 Jy ! Total flux subtracted in 200 components = 0.00683189 Jy ! Clean residual min=-0.010238 max=0.011161 Jy/beam ! Clean residual mean=-0.000011 rms=0.002714 Jy/beam ! Combined flux in latest and established models = 0.801938 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 146 components and 0.801938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097501Jy sigma=1.245262 ! Fit after self-cal, rms=0.097086Jy sigma=1.239178 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.101 x 8.614 at -26.06 degrees (North through East) ! Clean map min=-0.0098267 max=0.46599 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097086Jy sigma=1.239178 ! Fit after self-cal, rms=0.083538Jy sigma=1.005484 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083538Jy sigma=1.005484 ! Fit after self-cal, rms=0.083514Jy sigma=1.004929 ! Inverting map and beam ! Estimated beam: bmin=3.088 mas, bmaj=8.593 mas, bpa=-26.22 degrees ! Estimated noise=1.52111 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00364425 Jy ! Component: 100 - total flux cleaned = 0.00546319 Jy ! Component: 150 - total flux cleaned = 0.00647229 Jy ! Component: 200 - total flux cleaned = 0.00719457 Jy ! Total flux subtracted in 200 components = 0.00719457 Jy ! Clean residual min=-0.006828 max=0.007622 Jy/beam ! Clean residual mean=0.000012 rms=0.001911 Jy/beam ! Combined flux in latest and established models = 0.809133 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 167 components and 0.809133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082973Jy sigma=0.992736 ! Fit after self-cal, rms=0.082898Jy sigma=0.990963 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082898Jy sigma=0.990963 ! Fit after self-cal, rms=0.081464Jy sigma=0.970491 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081464Jy sigma=0.970491 ! Fit after self-cal, rms=0.081472Jy sigma=0.970482 ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.603 mas, bpa=-26.29 degrees ! Estimated noise=1.52223 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00366958 Jy ! Component: 100 - total flux cleaned = 0.00535867 Jy ! Component: 150 - total flux cleaned = 0.00632303 Jy ! Component: 200 - total flux cleaned = 0.00706757 Jy ! Total flux subtracted in 200 components = 0.00706757 Jy ! Clean residual min=-0.006448 max=0.006755 Jy/beam ! Clean residual mean=0.000011 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 0.8162 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 183 components and 0.8162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081100Jy sigma=0.963556 ! Fit after self-cal, rms=0.081045Jy sigma=0.962196 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=9.685 mas, bpa=-16.36 degrees ! Estimated noise=1.94218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00553478 Jy ! Component: 100 - total flux cleaned = 0.00686955 Jy ! Component: 150 - total flux cleaned = 0.00797984 Jy ! Component: 200 - total flux cleaned = 0.00816014 Jy ! Total flux subtracted in 200 components = 0.00816014 Jy ! Clean residual min=-0.007999 max=0.008977 Jy/beam ! Clean residual mean=0.000026 rms=0.002549 Jy/beam ! Combined flux in latest and established models = 0.824361 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 202 components and 0.824361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080859Jy sigma=0.961134 ! Fit after self-cal, rms=0.080796Jy sigma=0.959821 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=7.831 mas, bpa=-25.06 degrees ! Estimated noise=2.08244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.416453 Jy ! Component: 100 - total flux cleaned = 0.5395 Jy ! Component: 150 - total flux cleaned = 0.606777 Jy ! Component: 200 - total flux cleaned = 0.651224 Jy ! Total flux subtracted in 200 components = 0.651224 Jy ! Clean residual min=-0.012709 max=0.018702 Jy/beam ! Clean residual mean=0.000023 rms=0.004947 Jy/beam ! Combined flux in latest and established models = 0.651225 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 55 model components to the UV plane model. ! The established model now contains 55 components and 0.651225 Jy ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.603 mas, bpa=-26.29 degrees ! Estimated noise=1.52223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0484883 Jy ! Component: 100 - total flux cleaned = 0.0809304 Jy ! Component: 150 - total flux cleaned = 0.104096 Jy ! Component: 200 - total flux cleaned = 0.121019 Jy ! Total flux subtracted in 200 components = 0.121019 Jy ! Clean residual min=-0.008875 max=0.008065 Jy/beam ! Clean residual mean=0.000004 rms=0.002734 Jy/beam ! Combined flux in latest and established models = 0.772244 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 140 components and 0.772244 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.568 mas, bmaj=9.685 mas, bpa=-16.36 degrees ! Estimated noise=1.94218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0216334 Jy ! Component: 100 - total flux cleaned = 0.0339894 Jy ! Component: 150 - total flux cleaned = 0.0419881 Jy ! Component: 200 - total flux cleaned = 0.0474946 Jy ! Total flux subtracted in 200 components = 0.0474946 Jy ! Clean residual min=-0.008934 max=0.010258 Jy/beam ! Clean residual mean=0.000024 rms=0.002726 Jy/beam ! Combined flux in latest and established models = 0.819738 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 189 components and 0.819738 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.087 mas, bmaj=8.603 mas, bpa=-26.29 degrees ! Estimated noise=1.52223 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00237461 Jy ! Component: 100 - total flux cleaned = 0.00293087 Jy ! Component: 150 - total flux cleaned = 0.00292529 Jy ! Component: 200 - total flux cleaned = 0.0030506 Jy ! Total flux subtracted in 200 components = 0.0030506 Jy ! Clean residual min=-0.006193 max=0.007500 Jy/beam ! Clean residual mean=0.000011 rms=0.001758 Jy/beam ! Combined flux in latest and established models = 0.822789 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 219 components and 0.822789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081283Jy sigma=0.966031 ! Fit after self-cal, rms=0.081194Jy sigma=0.963588 wmodel J1159+2914_S_2006_02_16_yyk\_map.mod ! Writing 219 model components to file: J1159+2914_S_2006_02_16_yyk_map.mod wobs J1159+2914_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1159+2914_S_2006_02_16_yyk_uvs.fits wwins J1159+2914_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J1159+2914_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177007 Jy ! Component: 100 - total flux cleaned = 0.00238907 Jy ! Component: 150 - total flux cleaned = 0.0028557 Jy ! Component: 200 - total flux cleaned = 0.0033766 Jy ! Component: 250 - total flux cleaned = 0.0037868 Jy ! Component: 300 - total flux cleaned = 0.00409719 Jy ! Component: 350 - total flux cleaned = 0.00424686 Jy ! Component: 400 - total flux cleaned = 0.00418006 Jy ! Component: 450 - total flux cleaned = 0.00418143 Jy ! Component: 500 - total flux cleaned = 0.0040536 Jy ! Component: 550 - total flux cleaned = 0.00380675 Jy ! Component: 600 - total flux cleaned = 0.00374771 Jy ! Component: 650 - total flux cleaned = 0.00374653 Jy ! Component: 700 - total flux cleaned = 0.00380093 Jy ! Component: 750 - total flux cleaned = 0.00380065 Jy ! Component: 800 - total flux cleaned = 0.00396029 Jy ! Component: 850 - total flux cleaned = 0.00396028 Jy ! Component: 900 - total flux cleaned = 0.00395941 Jy ! Component: 950 - total flux cleaned = 0.00381201 Jy ! Component: 1000 - total flux cleaned = 0.00381245 Jy ! Component: 1050 - total flux cleaned = 0.0038128 Jy ! Component: 1100 - total flux cleaned = 0.00372095 Jy ! Component: 1150 - total flux cleaned = 0.00363142 Jy ! Component: 1200 - total flux cleaned = 0.00363217 Jy ! Component: 1250 - total flux cleaned = 0.00341636 Jy ! Component: 1300 - total flux cleaned = 0.00337477 Jy ! Component: 1350 - total flux cleaned = 0.00329118 Jy ! Component: 1400 - total flux cleaned = 0.00333225 Jy ! Component: 1450 - total flux cleaned = 0.00333133 Jy ! Component: 1500 - total flux cleaned = 0.00337059 Jy ! Component: 1550 - total flux cleaned = 0.00337026 Jy ! Component: 1600 - total flux cleaned = 0.00329422 Jy ! Component: 1650 - total flux cleaned = 0.00325765 Jy ! Component: 1700 - total flux cleaned = 0.00333193 Jy ! Component: 1750 - total flux cleaned = 0.003332 Jy ! Component: 1800 - total flux cleaned = 0.00340307 Jy ! Component: 1850 - total flux cleaned = 0.00343797 Jy ! Component: 1900 - total flux cleaned = 0.003438 Jy ! Component: 1950 - total flux cleaned = 0.00347194 Jy ! Component: 2000 - total flux cleaned = 0.0035054 Jy ! Total flux subtracted in 2048 components = 0.00350535 Jy ! Clean residual min=-0.002764 max=0.001720 Jy/beam ! Clean residual mean=0.000017 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.826294 Jy keep ! Adding 126 model components to the UV plane model. ! The established model now contains 345 components and 0.826294 Jy ![Exited script file: muppet] wmap "J1159+2914_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 8.603 at -26.29 degrees (North through East) ! Clean map min=-0.0041727 max=0.46533 Jy/beam ! Writing clean map to FITS file: J1159+2914_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.465331 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000673014 device "J1159+2914_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1159+2914_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.433894 0.433894 0.867787 1.73557 3.47115 6.9423 13.8846 27.7692 55.5384 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.465 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.087 x 8.603 at -26.29 degrees (North through East) ! Clean map min=-0.0041727 max=0.46533 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1159+2914_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1159+2914_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1159+2914_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:08:25 2006