! Started logfile: J1159+2914_S_2006_02_14_yyk_uvs.log on Wed Jul 5 12:07:36 2006 obs J1159+2914_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1159+2914_S_2006_02_14_yyk_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.642915 visibilities/baseline/integration-bin. ! Found source: J1159+2914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 25228 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1159+2914_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.523776 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=7.549 mas, bpa=-25.38 degrees ! Estimated noise=1.98237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.390464 Jy ! Component: 100 - total flux cleaned = 0.497896 Jy ! Total flux subtracted in 100 components = 0.497896 Jy ! Clean residual min=-0.029741 max=0.050848 Jy/beam ! Clean residual mean=-0.000153 rms=0.010065 Jy/beam ! Combined flux in latest and established models = 0.497896 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.497896 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.172985Jy sigma=2.874549 ! Fit after self-cal, rms=0.171790Jy sigma=2.857970 ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=7.549 mas, bpa=-25.38 degrees ! Estimated noise=1.98237 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.006 mas, bmaj=7.694 mas, bpa=-25.94 degrees ! Estimated noise=1.54334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0772238 Jy ! Component: 100 - total flux cleaned = 0.124754 Jy ! Component: 150 - total flux cleaned = 0.157314 Jy ! Component: 200 - total flux cleaned = 0.180905 Jy ! Total flux subtracted in 200 components = 0.180905 Jy ! Clean residual min=-0.027082 max=0.045219 Jy/beam ! Clean residual mean=-0.000086 rms=0.009345 Jy/beam ! Combined flux in latest and established models = 0.678801 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 58 components and 0.678801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133782Jy sigma=2.151993 ! Fit after self-cal, rms=0.132848Jy sigma=2.133677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.006 x 7.694 at -25.94 degrees (North through East) ! Clean map min=-0.026651 max=0.44906 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.02491 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.89 HN 0.95 KP 0.87 ! LA 1.18 MK 0.98 NL 1.06 OV 0.94 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.999308 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.00 KP 0.91 ! LA 1.14 MK 1.03 NL 1.10 OV 0.93 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.969548 ! Telescope amplitude corrections in sub-array 1: ! BR 1.40 FD 0.92 HN 0.99 KP 0.89 ! LA 0.91 MK 1.11 NL 1.14 OV 0.97 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.03915 ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.94 HN 0.88 KP 0.82 ! LA 0.77 MK 1.14 NL 1.06 OV 0.82 ! PT 1.00* SC 1.06 ! ! ! Fit before self-cal, rms=0.132848Jy sigma=2.133677 ! Fit after self-cal, rms=0.096279Jy sigma=1.454997 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096279Jy sigma=1.454997 ! Fit after self-cal, rms=0.096383Jy sigma=1.453998 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.17 mas, bmaj=7.973 mas, bpa=-25.52 degrees ! Estimated noise=1.54638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 10.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276362 Jy ! Component: 100 - total flux cleaned = 0.0334219 Jy ! Component: 150 - total flux cleaned = 0.0357257 Jy ! Component: 200 - total flux cleaned = 0.0353498 Jy ! Total flux subtracted in 200 components = 0.0353498 Jy ! Clean residual min=-0.009797 max=0.013933 Jy/beam ! Clean residual mean=0.000005 rms=0.003471 Jy/beam ! Combined flux in latest and established models = 0.714151 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 89 components and 0.714151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088008Jy sigma=1.269356 ! Fit after self-cal, rms=0.087314Jy sigma=1.258974 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087314Jy sigma=1.258974 ! Fit after self-cal, rms=0.084863Jy sigma=1.221389 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00744239 Jy ! Component: 100 - total flux cleaned = 0.00684737 Jy ! Component: 150 - total flux cleaned = 0.00685043 Jy ! Component: 200 - total flux cleaned = 0.00662794 Jy ! Total flux subtracted in 200 components = 0.00662793 Jy ! Clean residual min=-0.009048 max=0.011784 Jy/beam ! Clean residual mean=0.000008 rms=0.002972 Jy/beam ! Combined flux in latest and established models = 0.720779 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 113 components and 0.720778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083222Jy sigma=1.184356 ! Fit after self-cal, rms=0.082744Jy sigma=1.176863 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.17 x 7.973 at -25.52 degrees (North through East) ! Clean map min=-0.0094568 max=0.45737 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082744Jy sigma=1.176863 ! Fit after self-cal, rms=0.075953Jy sigma=1.037041 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075953Jy sigma=1.037041 ! Fit after self-cal, rms=0.076003Jy sigma=1.036368 ! Inverting map and beam ! Estimated beam: bmin=3.135 mas, bmaj=7.996 mas, bpa=-25.77 degrees ! Estimated noise=1.52928 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00968658 Jy ! Component: 100 - total flux cleaned = 0.012651 Jy ! Component: 150 - total flux cleaned = 0.0132101 Jy ! Component: 200 - total flux cleaned = 0.014 Jy ! Total flux subtracted in 200 components = 0.014 Jy ! Clean residual min=-0.008013 max=0.008191 Jy/beam ! Clean residual mean=0.000016 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 0.734778 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 144 components and 0.734778 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074847Jy sigma=1.004456 ! Fit after self-cal, rms=0.074743Jy sigma=0.999986 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074743Jy sigma=0.999986 ! Fit after self-cal, rms=0.074080Jy sigma=0.975341 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074080Jy sigma=0.975341 ! Fit after self-cal, rms=0.074138Jy sigma=0.975275 ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.01 mas, bpa=-25.87 degrees ! Estimated noise=1.52748 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679833 Jy ! Component: 100 - total flux cleaned = 0.00941311 Jy ! Component: 150 - total flux cleaned = 0.0100659 Jy ! Component: 200 - total flux cleaned = 0.0107272 Jy ! Total flux subtracted in 200 components = 0.0107272 Jy ! Clean residual min=-0.007707 max=0.006734 Jy/beam ! Clean residual mean=0.000021 rms=0.001978 Jy/beam ! Combined flux in latest and established models = 0.745506 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 172 components and 0.745506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073574Jy sigma=0.959435 ! Fit after self-cal, rms=0.073535Jy sigma=0.956529 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.212 mas, bmaj=8.961 mas, bpa=-14.05 degrees ! Estimated noise=1.9422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400679 Jy ! Component: 100 - total flux cleaned = 0.00599755 Jy ! Component: 150 - total flux cleaned = 0.00764757 Jy ! Component: 200 - total flux cleaned = 0.00894895 Jy ! Total flux subtracted in 200 components = 0.00894895 Jy ! Clean residual min=-0.008596 max=0.009399 Jy/beam ! Clean residual mean=0.000050 rms=0.002658 Jy/beam ! Combined flux in latest and established models = 0.754454 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 206 components and 0.754455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073230Jy sigma=0.951683 ! Fit after self-cal, rms=0.073205Jy sigma=0.948208 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.601 mas, bmaj=7.678 mas, bpa=-25.74 degrees ! Estimated noise=1.96698 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.38536 Jy ! Component: 100 - total flux cleaned = 0.491967 Jy ! Component: 150 - total flux cleaned = 0.550736 Jy ! Component: 200 - total flux cleaned = 0.589724 Jy ! Total flux subtracted in 200 components = 0.589724 Jy ! Clean residual min=-0.017422 max=0.017640 Jy/beam ! Clean residual mean=-0.000048 rms=0.004939 Jy/beam ! Combined flux in latest and established models = 0.589724 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.589724 Jy ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.01 mas, bpa=-25.87 degrees ! Estimated noise=1.52748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0439114 Jy ! Component: 100 - total flux cleaned = 0.0733114 Jy ! Component: 150 - total flux cleaned = 0.0951476 Jy ! Component: 200 - total flux cleaned = 0.111868 Jy ! Total flux subtracted in 200 components = 0.111868 Jy ! Clean residual min=-0.011550 max=0.009094 Jy/beam ! Clean residual mean=-0.000023 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 0.701591 Jy ! Adding 99 model components to the UV plane model. ! The established model now contains 132 components and 0.701591 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.212 mas, bmaj=8.961 mas, bpa=-14.05 degrees ! Estimated noise=1.9422 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.023145 Jy ! Component: 100 - total flux cleaned = 0.0369927 Jy ! Component: 150 - total flux cleaned = 0.0454634 Jy ! Component: 200 - total flux cleaned = 0.0496469 Jy ! Total flux subtracted in 200 components = 0.0496469 Jy ! Clean residual min=-0.010508 max=0.008247 Jy/beam ! Clean residual mean=0.000034 rms=0.002705 Jy/beam ! Combined flux in latest and established models = 0.751238 Jy ! Adding 75 model components to the UV plane model. ! The established model now contains 189 components and 0.751238 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.123 mas, bmaj=8.01 mas, bpa=-25.87 degrees ! Estimated noise=1.52748 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.004065 Jy ! Component: 100 - total flux cleaned = 0.00532947 Jy ! Component: 150 - total flux cleaned = 0.00578122 Jy ! Component: 200 - total flux cleaned = 0.00640707 Jy ! Total flux subtracted in 200 components = 0.00640707 Jy ! Clean residual min=-0.007985 max=0.006488 Jy/beam ! Clean residual mean=0.000020 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 0.757645 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 214 components and 0.757645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073284Jy sigma=0.953064 ! Fit after self-cal, rms=0.073267Jy sigma=0.951463 wmodel J1159+2914_S_2006_02_14_yyk\_map.mod ! Writing 214 model components to file: J1159+2914_S_2006_02_14_yyk_map.mod wobs J1159+2914_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1159+2914_S_2006_02_14_yyk_uvs.fits wwins J1159+2914_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1159+2914_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000664946 Jy ! Component: 100 - total flux cleaned = -0.00024778 Jy ! Component: 150 - total flux cleaned = 0.000429083 Jy ! Component: 200 - total flux cleaned = 0.000604631 Jy ! Component: 250 - total flux cleaned = 0.000352644 Jy ! Component: 300 - total flux cleaned = 0.000274688 Jy ! Component: 350 - total flux cleaned = 0.00057301 Jy ! Component: 400 - total flux cleaned = 0.000499466 Jy ! Component: 450 - total flux cleaned = 0.000501989 Jy ! Component: 500 - total flux cleaned = 0.000437773 Jy ! Component: 550 - total flux cleaned = 0.000622851 Jy ! Component: 600 - total flux cleaned = 0.000921996 Jy ! Component: 650 - total flux cleaned = 0.00109631 Jy ! Component: 700 - total flux cleaned = 0.00148852 Jy ! Component: 750 - total flux cleaned = 0.0016507 Jy ! Component: 800 - total flux cleaned = 0.00180806 Jy ! Component: 850 - total flux cleaned = 0.00200865 Jy ! Component: 900 - total flux cleaned = 0.00220532 Jy ! Component: 950 - total flux cleaned = 0.00263672 Jy ! Component: 1000 - total flux cleaned = 0.00291731 Jy ! Component: 1050 - total flux cleaned = 0.00341913 Jy ! Component: 1100 - total flux cleaned = 0.00368614 Jy ! Component: 1150 - total flux cleaned = 0.00407879 Jy ! Component: 1200 - total flux cleaned = 0.00446157 Jy ! Component: 1250 - total flux cleaned = 0.00500167 Jy ! Component: 1300 - total flux cleaned = 0.00532746 Jy ! Component: 1350 - total flux cleaned = 0.00564779 Jy ! Component: 1400 - total flux cleaned = 0.00600072 Jy ! Component: 1450 - total flux cleaned = 0.00638559 Jy ! Component: 1500 - total flux cleaned = 0.00668867 Jy ! Component: 1550 - total flux cleaned = 0.00706059 Jy ! Component: 1600 - total flux cleaned = 0.0074996 Jy ! Component: 1650 - total flux cleaned = 0.00778667 Jy ! Component: 1700 - total flux cleaned = 0.00799927 Jy ! Component: 1750 - total flux cleaned = 0.00838379 Jy ! Component: 1800 - total flux cleaned = 0.00859039 Jy ! Component: 1850 - total flux cleaned = 0.00896317 Jy ! Component: 1900 - total flux cleaned = 0.00912999 Jy ! Component: 1950 - total flux cleaned = 0.0093932 Jy ! Component: 2000 - total flux cleaned = 0.00958798 Jy ! Total flux subtracted in 2048 components = 0.00968405 Jy ! Clean residual min=-0.002298 max=0.002170 Jy/beam ! Clean residual mean=0.000016 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.767329 Jy keep ! Adding 146 model components to the UV plane model. ! The established model now contains 360 components and 0.76733 Jy ![Exited script file: muppet] wmap "J1159+2914_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.123 x 8.01 at -25.87 degrees (North through East) ! Clean map min=-0.0055341 max=0.45413 Jy/beam ! Writing clean map to FITS file: J1159+2914_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.45413 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625471 device "J1159+2914_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1159+2914_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.413189 0.413189 0.826377 1.65275 3.30551 6.61102 13.222 26.4441 52.8882 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.454 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.123 x 8.01 at -25.87 degrees (North through East) ! Clean map min=-0.0055341 max=0.45413 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1159+2914_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1159+2914_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1159+2914_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:08:00 2006