! Started logfile: J1153+8058_S_2006_02_16_yyk_uvs.log on Wed Jul  5 12:03:58 2006
obs J1153+8058_S_2006_02_16_yyk_uva.fits
! Reading UV FITS file: J1153+8058_S_2006_02_16_yyk_uva.fits
! AN table 1: 711 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.693483 visibilities/baseline/integration-bin.
! Found source: J1153+8058
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2421 lines of history.
! 
! Reading 88752 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1153+8058_S_2006_02_16_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.36573 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.639 mas, bmaj=5.344 mas, bpa=62.45 degrees
! Estimated noise=1.71176 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.992659 Jy
! Component: 100  -  total flux cleaned = 1.34844 Jy
! Total flux subtracted in 100 components = 1.34844 Jy
! Clean residual min=-0.044296 max=0.110480 Jy/beam
! Clean residual mean=0.000199 rms=0.015495 Jy/beam
! Combined flux in latest and established models = 1.34844 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 1.34844 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.448783Jy  sigma=5.034164
! Fit after  self-cal, rms=0.446154Jy  sigma=4.984129
! Inverting map and beam 
! Estimated beam: bmin=2.64 mas, bmaj=5.341 mas, bpa=62.39 degrees
! Estimated noise=1.71061 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.158104 Jy
! Component: 100  -  total flux cleaned = 0.247096 Jy
! Total flux subtracted in 100 components = 0.247096 Jy
! Clean residual min=-0.038375 max=0.068640 Jy/beam
! Clean residual mean=-0.000124 rms=0.011276 Jy/beam
! Combined flux in latest and established models = 1.59554 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 1.59554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.372222Jy  sigma=3.944589
! Fit after  self-cal, rms=0.371804Jy  sigma=3.936980
! Inverting map 
! Added new window around map position (6.5, -5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0827654 Jy
! Component: 100  -  total flux cleaned = 0.130682 Jy
! Total flux subtracted in 100 components = 0.130682 Jy
! Clean residual min=-0.036205 max=0.063920 Jy/beam
! Clean residual mean=-0.000273 rms=0.009671 Jy/beam
! Combined flux in latest and established models = 1.72622 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 44 components and 1.72622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.348899Jy  sigma=3.652863
! Fit after  self-cal, rms=0.347270Jy  sigma=3.620713
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.528 mas, bmaj=6.608 mas, bpa=62.76 degrees
! Estimated noise=1.08766 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0333701 Jy
! Component: 100  -  total flux cleaned = 0.0374055 Jy
! Component: 150  -  total flux cleaned = 0.0404862 Jy
! Component: 200  -  total flux cleaned = 0.0429384 Jy
! Total flux subtracted in 200 components = 0.0429384 Jy
! Clean residual min=-0.032135 max=0.046931 Jy/beam
! Clean residual mean=-0.001252 rms=0.008782 Jy/beam
! Combined flux in latest and established models = 1.76916 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 1.76916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.340850Jy  sigma=3.536814
! Fit after  self-cal, rms=0.340491Jy  sigma=3.532144
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.528 x 6.608 at 62.76 degrees (North through East)
! Clean map  min=-0.032665  max=1.0682 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00327
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.92     HN        0.94     KP        0.95     
!   LA        1.24     MK        0.90     NL        1.10     OV        0.94     
!   PT        1.05     SC        1.02     
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.977175
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        0.96     KP        0.98     
!   LA        1.16     MK        0.98     NL        1.18     OV        0.98     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.976674
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.97     HN        0.99     KP        0.98     
!   LA        0.92     MK        1.16     NL        1.26     OV        1.01     
!   PT        1.06     SC        1.10     
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.01007
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.92     KP        0.89     
!   LA        0.79     MK        1.12     NL        1.22     OV        0.86     
!   PT        0.93     SC        1.20     
! 
! 
! Fit before self-cal, rms=0.340491Jy  sigma=3.532144
! Fit after  self-cal, rms=0.199827Jy  sigma=2.296588
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199827Jy  sigma=2.296588
! Fit after  self-cal, rms=0.199941Jy  sigma=2.296211
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=6.67 mas, bpa=61.44 degrees
! Estimated noise=1.07623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0361488 Jy
! Component: 100  -  total flux cleaned = -0.0459054 Jy
! Component: 150  -  total flux cleaned = -0.0497002 Jy
! Component: 200  -  total flux cleaned = -0.0510212 Jy
! Total flux subtracted in 200 components = -0.0510212 Jy
! Clean residual min=-0.023875 max=0.015190 Jy/beam
! Clean residual mean=0.000036 rms=0.004664 Jy/beam
! Combined flux in latest and established models = 1.71814 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 1.71814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197829Jy  sigma=2.209117
! Fit after  self-cal, rms=0.197192Jy  sigma=2.199782
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197192Jy  sigma=2.199782
! Fit after  self-cal, rms=0.184299Jy  sigma=2.037176
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00749712 Jy
! Component: 100  -  total flux cleaned = -0.00723954 Jy
! Component: 150  -  total flux cleaned = -0.00700454 Jy
! Component: 200  -  total flux cleaned = -0.00680046 Jy
! Total flux subtracted in 200 components = -0.00680046 Jy
! Clean residual min=-0.018062 max=0.013942 Jy/beam
! Clean residual mean=0.000032 rms=0.004356 Jy/beam
! Combined flux in latest and established models = 1.71134 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 1.71134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.184105Jy  sigma=2.024241
! Fit after  self-cal, rms=0.182756Jy  sigma=2.013713
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.652 x 6.67 at 61.44 degrees (North through East)
! Clean map  min=-0.016311  max=1.0949 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182756Jy  sigma=2.013713
! Fit after  self-cal, rms=0.102726Jy  sigma=1.135816
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102726Jy  sigma=1.135816
! Fit after  self-cal, rms=0.102270Jy  sigma=1.133624
! Inverting map and beam 
! Estimated beam: bmin=3.627 mas, bmaj=6.683 mas, bpa=62.04 degrees
! Estimated noise=1.07043 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.0123603 Jy
! Component: 100  -  total flux cleaned = -0.0142618 Jy
! Component: 150  -  total flux cleaned = -0.0151222 Jy
! Component: 200  -  total flux cleaned = -0.0158152 Jy
! Total flux subtracted in 200 components = -0.0158152 Jy
! Clean residual min=-0.008635 max=0.006225 Jy/beam
! Clean residual mean=0.000039 rms=0.001959 Jy/beam
! Combined flux in latest and established models = 1.69552 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 1.69552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099805Jy  sigma=1.092535
! Fit after  self-cal, rms=0.099446Jy  sigma=1.088616
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099446Jy  sigma=1.088616
! Fit after  self-cal, rms=0.096862Jy  sigma=1.046462
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096862Jy  sigma=1.046462
! Fit after  self-cal, rms=0.096807Jy  sigma=1.046260
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=6.69 mas, bpa=62.32 degrees
! Estimated noise=1.06967 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00840391 Jy
! Component: 100  -  total flux cleaned = -0.00948589 Jy
! Component: 150  -  total flux cleaned = -0.0105246 Jy
! Component: 200  -  total flux cleaned = -0.0110158 Jy
! Total flux subtracted in 200 components = -0.0110158 Jy
! Clean residual min=-0.007137 max=0.006372 Jy/beam
! Clean residual mean=0.000032 rms=0.001666 Jy/beam
! Combined flux in latest and established models = 1.68451 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 1.68451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095514Jy  sigma=1.025295
! Fit after  self-cal, rms=0.095403Jy  sigma=1.023510
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.45 mas, bmaj=11.79 mas, bpa=59.88 degrees
! Estimated noise=1.3324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119336 Jy
! Component: 100  -  total flux cleaned = -0.00121796 Jy
! Component: 150  -  total flux cleaned = -0.00108726 Jy
! Component: 200  -  total flux cleaned = -0.00092633 Jy
! Total flux subtracted in 200 components = -0.00092633 Jy
! Clean residual min=-0.006213 max=0.007342 Jy/beam
! Clean residual mean=0.000065 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 1.68358 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 1.68358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095271Jy  sigma=1.021628
! Fit after  self-cal, rms=0.095251Jy  sigma=1.020994
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.676 mas, bmaj=5.356 mas, bpa=62.4 degrees
! Estimated noise=1.68183 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.976014 Jy
! Component: 100  -  total flux cleaned = 1.32303 Jy
! Component: 150  -  total flux cleaned = 1.47245 Jy
! Component: 200  -  total flux cleaned = 1.54895 Jy
! Total flux subtracted in 200 components = 1.54895 Jy
! Clean residual min=-0.012672 max=0.028119 Jy/beam
! Clean residual mean=0.000155 rms=0.003992 Jy/beam
! Combined flux in latest and established models = 1.54895 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 1.54895 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=6.69 mas, bpa=62.32 degrees
! Estimated noise=1.06967 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0669105 Jy
! Component: 100  -  total flux cleaned = 0.0991895 Jy
! Component: 150  -  total flux cleaned = 0.116536 Jy
! Component: 200  -  total flux cleaned = 0.124722 Jy
! Total flux subtracted in 200 components = 0.124722 Jy
! Clean residual min=-0.006410 max=0.007315 Jy/beam
! Clean residual mean=0.000051 rms=0.001787 Jy/beam
! Combined flux in latest and established models = 1.67367 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 71 components and 1.67367 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.45 mas, bmaj=11.79 mas, bpa=59.88 degrees
! Estimated noise=1.3324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00889624 Jy
! Component: 100  -  total flux cleaned = 0.00990058 Jy
! Component: 150  -  total flux cleaned = 0.0106362 Jy
! Component: 200  -  total flux cleaned = 0.0107496 Jy
! Total flux subtracted in 200 components = 0.0107496 Jy
! Clean residual min=-0.006683 max=0.007265 Jy/beam
! Clean residual mean=0.000066 rms=0.002268 Jy/beam
! Combined flux in latest and established models = 1.68442 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 82 components and 1.68442 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.626 mas, bmaj=6.69 mas, bpa=62.32 degrees
! Estimated noise=1.06967 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000834814 Jy
! Component: 100  -  total flux cleaned = -0.00132443 Jy
! Component: 150  -  total flux cleaned = -0.00144962 Jy
! Component: 200  -  total flux cleaned = -0.0015509 Jy
! Total flux subtracted in 200 components = -0.0015509 Jy
! Clean residual min=-0.005519 max=0.005935 Jy/beam
! Clean residual mean=0.000037 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 1.68287 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 1.68287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094766Jy  sigma=1.016492
! Fit after  self-cal, rms=0.094716Jy  sigma=1.015417
wmodel J1153+8058_S_2006_02_16_yyk\_map.mod
! Writing 91 model components to file: J1153+8058_S_2006_02_16_yyk_map.mod
wobs J1153+8058_S_2006_02_16_yyk\_uvs.fits
! Writing UV FITS file: J1153+8058_S_2006_02_16_yyk_uvs.fits
wwins J1153+8058_S_2006_02_16_yyk\_map.win
! wwins: Wrote 2 windows to J1153+8058_S_2006_02_16_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00169576 Jy
! Component: 100  -  total flux cleaned = 0.00169818 Jy
! Component: 150  -  total flux cleaned = 0.00122701 Jy
! Component: 200  -  total flux cleaned = 0.000774548 Jy
! Component: 250  -  total flux cleaned = 0.00042555 Jy
! Component: 300  -  total flux cleaned = 0.000257009 Jy
! Component: 350  -  total flux cleaned = 0.000339214 Jy
! Component: 400  -  total flux cleaned = 0.000339147 Jy
! Component: 450  -  total flux cleaned = 0.000494519 Jy
! Component: 500  -  total flux cleaned = 0.000342465 Jy
! Component: 550  -  total flux cleaned = 0.000342843 Jy
! Component: 600  -  total flux cleaned = 0.000271101 Jy
! Component: 650  -  total flux cleaned = 0.000342854 Jy
! Component: 700  -  total flux cleaned = 0.00041256 Jy
! Component: 750  -  total flux cleaned = 0.000547221 Jy
! Component: 800  -  total flux cleaned = 0.000679614 Jy
! Component: 850  -  total flux cleaned = 0.000875698 Jy
! Component: 900  -  total flux cleaned = 0.00119613 Jy
! Component: 950  -  total flux cleaned = 0.00132258 Jy
! Component: 1000  -  total flux cleaned = 0.00157023 Jy
! Component: 1050  -  total flux cleaned = 0.00175314 Jy
! Component: 1100  -  total flux cleaned = 0.00187347 Jy
! Component: 1150  -  total flux cleaned = 0.002168 Jy
! Component: 1200  -  total flux cleaned = 0.00240106 Jy
! Component: 1250  -  total flux cleaned = 0.00251652 Jy
! Component: 1300  -  total flux cleaned = 0.00280072 Jy
! Component: 1350  -  total flux cleaned = 0.00302448 Jy
! Component: 1400  -  total flux cleaned = 0.00324635 Jy
! Component: 1450  -  total flux cleaned = 0.00351881 Jy
! Component: 1500  -  total flux cleaned = 0.00362664 Jy
! Component: 1550  -  total flux cleaned = 0.00378664 Jy
! Component: 1600  -  total flux cleaned = 0.00394468 Jy
! Component: 1650  -  total flux cleaned = 0.00394414 Jy
! Component: 1700  -  total flux cleaned = 0.00394457 Jy
! Component: 1750  -  total flux cleaned = 0.00399609 Jy
! Component: 1800  -  total flux cleaned = 0.00394623 Jy
! Component: 1850  -  total flux cleaned = 0.0040957 Jy
! Component: 1900  -  total flux cleaned = 0.00404646 Jy
! Component: 1950  -  total flux cleaned = 0.00404638 Jy
! Component: 2000  -  total flux cleaned = 0.00385351 Jy
! Total flux subtracted in 2048 components = 0.00404528 Jy
! Clean residual min=-0.002902 max=0.003223 Jy/beam
! Clean residual mean=0.000025 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 1.68691 Jy
keep
! Adding 143 model components to the UV plane model.
! The established model now contains 234 components and 1.68692 Jy
![Exited script file: muppet]
wmap "J1153+8058_S_2006_02_16_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.626 x 6.69 at 62.32 degrees (North through East)
! Clean map  min=-0.0049736  max=1.0913 Jy/beam
! Writing clean map to FITS file: J1153+8058_S_2006_02_16_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.09126 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000983877 
device "J1153+8058_S_2006_02_16_yyk\_map.eps/VPS"
! Attempting to open device: 'J1153+8058_S_2006_02_16_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.270479 0.270479 0.540958 1.08192 2.16383 4.32767 8.65533 17.3107 34.6213 69.2427
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0029 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.091 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.626 x 6.69 at 62.32 degrees (North through East)
! Clean map  min=-0.0049736  max=1.0913 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1153+8058_S_2006_02_16_yyk\_map.gif/gif"
! Attempting to open device: 'J1153+8058_S_2006_02_16_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1153+8058_S_2006_02_16_yyk_uvs.log closed on Wed Jul  5 12:04:28 2006