! Started logfile: J1153+8058_S_2006_02_14_yyk_uvs.log on Wed Jul  5 12:03:34 2006
obs J1153+8058_S_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1153+8058_S_2006_02_14_yyk_uva.fits
! AN table 1: 728 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.696856 visibilities/baseline/integration-bin.
! Found source: J1153+8058
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23697e+09        8e+06          1        8e+06
!  02        2  2.26697e+09        8e+06          1        8e+06
!  03        3  2.35697e+09        8e+06          1        8e+06
!  04        4  2.37697e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2683 lines of history.
! 
! Reading 91316 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1153+8058_S_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 1.39405 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.652 mas, bmaj=4.489 mas, bpa=59.09 degrees
! Estimated noise=1.54178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, -0.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.05789 Jy
! Component: 100  -  total flux cleaned = 1.43279 Jy
! Total flux subtracted in 100 components = 1.43279 Jy
! Clean residual min=-0.033251 max=0.117981 Jy/beam
! Clean residual mean=0.000069 rms=0.012902 Jy/beam
! Combined flux in latest and established models = 1.43279 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.43279 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.360626Jy  sigma=4.391544
! Fit after  self-cal, rms=0.358365Jy  sigma=4.365765
! Inverting map and beam 
! Estimated beam: bmin=2.654 mas, bmaj=4.492 mas, bpa=59.08 degrees
! Estimated noise=1.54067 mJy/beam.
! Added new window around map position (-0.5, 2.5).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.168574 Jy
! Component: 100  -  total flux cleaned = 0.253326 Jy
! Total flux subtracted in 100 components = 0.253326 Jy
! Clean residual min=-0.023651 max=0.030186 Jy/beam
! Clean residual mean=-0.000207 rms=0.006642 Jy/beam
! Combined flux in latest and established models = 1.68612 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 1.68612 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.262820Jy  sigma=3.011860
! Fit after  self-cal, rms=0.262476Jy  sigma=3.006198
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=5.79 mas, bpa=60.34 degrees
! Estimated noise=1.06711 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0464839 Jy
! Component: 100  -  total flux cleaned = 0.0647919 Jy
! Component: 150  -  total flux cleaned = 0.0712814 Jy
! Component: 200  -  total flux cleaned = 0.0728361 Jy
! Total flux subtracted in 200 components = 0.0728361 Jy
! Clean residual min=-0.018258 max=0.017962 Jy/beam
! Clean residual mean=-0.000728 rms=0.005700 Jy/beam
! Combined flux in latest and established models = 1.75896 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 1.75896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.249578Jy  sigma=2.907160
! Fit after  self-cal, rms=0.249402Jy  sigma=2.903338
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.461 x 5.79 at 60.34 degrees (North through East)
! Clean map  min=-0.016599  max=1.1461 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00956
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.98     KP        0.96     
!   LA        1.22     MK        0.89     NL        0.94     OV        0.99     
!   PT        1.05     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.98641
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.18     MK        0.97     NL        0.96     OV        1.01     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.974256
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.95     MK        1.12     NL        1.06     OV        1.03     
!   PT        1.09     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.02744
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.95     KP        0.89     
!   LA        0.80     MK        1.12     NL        0.97     OV        0.86     
!   PT        0.95     SC        1.15     
! 
! 
! Fit before self-cal, rms=0.249402Jy  sigma=2.903338
! Fit after  self-cal, rms=0.168664Jy  sigma=2.004880
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168664Jy  sigma=2.004880
! Fit after  self-cal, rms=0.168599Jy  sigma=2.003826
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.543 mas, bmaj=5.917 mas, bpa=59.93 degrees
! Estimated noise=1.06406 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00482625 Jy
! Component: 100  -  total flux cleaned = -0.00630073 Jy
! Component: 150  -  total flux cleaned = -0.00719628 Jy
! Component: 200  -  total flux cleaned = -0.00745972 Jy
! Total flux subtracted in 200 components = -0.00745972 Jy
! Clean residual min=-0.010763 max=0.015466 Jy/beam
! Clean residual mean=0.000102 rms=0.003576 Jy/beam
! Combined flux in latest and established models = 1.7515 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 64 components and 1.7515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168568Jy  sigma=1.994872
! Fit after  self-cal, rms=0.168535Jy  sigma=1.993456
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168535Jy  sigma=1.993456
! Fit after  self-cal, rms=0.155821Jy  sigma=1.831824
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.000474642 Jy
! Component: 100  -  total flux cleaned = -0.000780784 Jy
! Component: 150  -  total flux cleaned = -0.000904638 Jy
! Component: 200  -  total flux cleaned = -0.00078572 Jy
! Total flux subtracted in 200 components = -0.00078572 Jy
! Clean residual min=-0.010732 max=0.015744 Jy/beam
! Clean residual mean=0.000102 rms=0.003538 Jy/beam
! Combined flux in latest and established models = 1.75071 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 72 components and 1.75071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.155464Jy  sigma=1.828556
! Fit after  self-cal, rms=0.154630Jy  sigma=1.819920
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.543 x 5.917 at 59.93 degrees (North through East)
! Clean map  min=-0.01055  max=1.1606 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154630Jy  sigma=1.819920
! Fit after  self-cal, rms=0.094949Jy  sigma=1.074173
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094949Jy  sigma=1.074173
! Fit after  self-cal, rms=0.094770Jy  sigma=1.072790
! Inverting map and beam 
! Estimated beam: bmin=3.531 mas, bmaj=5.951 mas, bpa=59.85 degrees
! Estimated noise=1.05882 mJy/beam.
! Added new window around map position (6, -5.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125234 Jy
! Component: 100  -  total flux cleaned = 0.0141728 Jy
! Component: 150  -  total flux cleaned = 0.0156055 Jy
! Component: 200  -  total flux cleaned = 0.0164461 Jy
! Total flux subtracted in 200 components = 0.0164461 Jy
! Clean residual min=-0.006139 max=0.006062 Jy/beam
! Clean residual mean=-0.000042 rms=0.001536 Jy/beam
! Combined flux in latest and established models = 1.76716 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 108 components and 1.76716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093174Jy  sigma=1.044527
! Fit after  self-cal, rms=0.092988Jy  sigma=1.041335
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092988Jy  sigma=1.041335
! Fit after  self-cal, rms=0.091596Jy  sigma=1.020605
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091596Jy  sigma=1.020605
! Fit after  self-cal, rms=0.091593Jy  sigma=1.020572
! Inverting map and beam 
! Estimated beam: bmin=3.532 mas, bmaj=5.959 mas, bpa=59.96 degrees
! Estimated noise=1.05847 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045963 Jy
! Component: 100  -  total flux cleaned = 0.00568117 Jy
! Component: 150  -  total flux cleaned = 0.00595053 Jy
! Component: 200  -  total flux cleaned = 0.00618519 Jy
! Total flux subtracted in 200 components = 0.00618519 Jy
! Clean residual min=-0.005306 max=0.005374 Jy/beam
! Clean residual mean=-0.000030 rms=0.001369 Jy/beam
! Combined flux in latest and established models = 1.77334 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 118 components and 1.77334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091043Jy  sigma=1.011185
! Fit after  self-cal, rms=0.090991Jy  sigma=1.010160
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=10.85 mas, bpa=54.85 degrees
! Estimated noise=1.33698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305449 Jy
! Component: 100  -  total flux cleaned = 0.00374195 Jy
! Component: 150  -  total flux cleaned = 0.00393571 Jy
! Component: 200  -  total flux cleaned = 0.00401896 Jy
! Total flux subtracted in 200 components = 0.00401896 Jy
! Clean residual min=-0.005077 max=0.006355 Jy/beam
! Clean residual mean=-0.000075 rms=0.001758 Jy/beam
! Combined flux in latest and established models = 1.77736 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 129 components and 1.77736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090938Jy  sigma=1.008891
! Fit after  self-cal, rms=0.090889Jy  sigma=1.007797
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.687 mas, bmaj=4.561 mas, bpa=59.37 degrees
! Estimated noise=1.52515 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.04504 Jy
! Component: 100  -  total flux cleaned = 1.41128 Jy
! Component: 150  -  total flux cleaned = 1.57118 Jy
! Component: 200  -  total flux cleaned = 1.65181 Jy
! Total flux subtracted in 200 components = 1.65181 Jy
! Clean residual min=-0.012313 max=0.028887 Jy/beam
! Clean residual mean=0.000076 rms=0.003832 Jy/beam
! Combined flux in latest and established models = 1.6518 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 1.6518 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.532 mas, bmaj=5.959 mas, bpa=59.96 degrees
! Estimated noise=1.05847 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0598208 Jy
! Component: 100  -  total flux cleaned = 0.0872772 Jy
! Component: 150  -  total flux cleaned = 0.102816 Jy
! Component: 200  -  total flux cleaned = 0.112579 Jy
! Total flux subtracted in 200 components = 0.112579 Jy
! Clean residual min=-0.005646 max=0.006494 Jy/beam
! Clean residual mean=-0.000025 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 1.76438 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 74 components and 1.76438 Jy
! Inverting map 
! Added new window around map position (15.5, -13.5).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00729444 Jy
! Component: 100  -  total flux cleaned = 0.0117381 Jy
! Component: 150  -  total flux cleaned = 0.0154776 Jy
! Component: 200  -  total flux cleaned = 0.0172742 Jy
! Total flux subtracted in 200 components = 0.0172742 Jy
! Clean residual min=-0.005003 max=0.005041 Jy/beam
! Clean residual mean=-0.000035 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 1.78166 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 99 components and 1.78166 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=10.85 mas, bpa=54.85 degrees
! Estimated noise=1.33698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261193 Jy
! Component: 100  -  total flux cleaned = 0.00355319 Jy
! Component: 150  -  total flux cleaned = 0.00419535 Jy
! Component: 200  -  total flux cleaned = 0.00463961 Jy
! Total flux subtracted in 200 components = 0.00463961 Jy
! Clean residual min=-0.005318 max=0.004986 Jy/beam
! Clean residual mean=-0.000089 rms=0.001613 Jy/beam
! Combined flux in latest and established models = 1.7863 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 143 components and 1.7863 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.532 mas, bmaj=5.959 mas, bpa=59.96 degrees
! Estimated noise=1.05847 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026906 Jy
! Component: 100  -  total flux cleaned = 0.000364169 Jy
! Component: 150  -  total flux cleaned = 0.00075344 Jy
! Component: 200  -  total flux cleaned = 0.00102062 Jy
! Total flux subtracted in 200 components = 0.00102062 Jy
! Clean residual min=-0.004818 max=0.004651 Jy/beam
! Clean residual mean=-0.000042 rms=0.001223 Jy/beam
! Combined flux in latest and established models = 1.78732 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 157 components and 1.78732 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090537Jy  sigma=0.999216
! Fit after  self-cal, rms=0.090333Jy  sigma=0.996964
wmodel J1153+8058_S_2006_02_14_yyk\_map.mod
! Writing 157 model components to file: J1153+8058_S_2006_02_14_yyk_map.mod
wobs J1153+8058_S_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1153+8058_S_2006_02_14_yyk_uvs.fits
wwins J1153+8058_S_2006_02_14_yyk\_map.win
! wwins: Wrote 4 windows to J1153+8058_S_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 9.96474e-05 Jy
! Component: 100  -  total flux cleaned = -0.00021657 Jy
! Component: 150  -  total flux cleaned = -0.000517076 Jy
! Component: 200  -  total flux cleaned = -0.00101723 Jy
! Component: 250  -  total flux cleaned = -0.00136196 Jy
! Component: 300  -  total flux cleaned = -0.00189886 Jy
! Component: 350  -  total flux cleaned = -0.00222649 Jy
! Component: 400  -  total flux cleaned = -0.00273567 Jy
! Component: 450  -  total flux cleaned = -0.0030456 Jy
! Component: 500  -  total flux cleaned = -0.00322719 Jy
! Component: 550  -  total flux cleaned = -0.00352366 Jy
! Component: 600  -  total flux cleaned = -0.00381237 Jy
! Component: 650  -  total flux cleaned = -0.00409644 Jy
! Component: 700  -  total flux cleaned = -0.00448813 Jy
! Component: 750  -  total flux cleaned = -0.00492916 Jy
! Component: 800  -  total flux cleaned = -0.00536324 Jy
! Component: 850  -  total flux cleaned = -0.00568443 Jy
! Component: 900  -  total flux cleaned = -0.00615861 Jy
! Component: 950  -  total flux cleaned = -0.00641908 Jy
! Component: 1000  -  total flux cleaned = -0.00682933 Jy
! Component: 1050  -  total flux cleaned = -0.00723281 Jy
! Component: 1100  -  total flux cleaned = -0.00753127 Jy
! Component: 1150  -  total flux cleaned = -0.00787403 Jy
! Component: 1200  -  total flux cleaned = -0.0080679 Jy
! Component: 1250  -  total flux cleaned = -0.00835396 Jy
! Component: 1300  -  total flux cleaned = -0.00854277 Jy
! Component: 1350  -  total flux cleaned = -0.00872913 Jy
! Component: 1400  -  total flux cleaned = -0.00900522 Jy
! Component: 1450  -  total flux cleaned = -0.00905079 Jy
! Component: 1500  -  total flux cleaned = -0.00918602 Jy
! Component: 1550  -  total flux cleaned = -0.00949664 Jy
! Component: 1600  -  total flux cleaned = -0.00949643 Jy
! Component: 1650  -  total flux cleaned = -0.00962627 Jy
! Component: 1700  -  total flux cleaned = -0.00958444 Jy
! Component: 1750  -  total flux cleaned = -0.00971165 Jy
! Component: 1800  -  total flux cleaned = -0.00983836 Jy
! Component: 1850  -  total flux cleaned = -0.0100045 Jy
! Component: 1900  -  total flux cleaned = -0.0100457 Jy
! Component: 1950  -  total flux cleaned = -0.0100866 Jy
! Component: 2000  -  total flux cleaned = -0.0103689 Jy
! Total flux subtracted in 2048 components = -0.0102492 Jy
! Clean residual min=-0.002490 max=0.002808 Jy/beam
! Clean residual mean=-0.000003 rms=0.000801 Jy/beam
! Combined flux in latest and established models = 1.77707 Jy
keep
! Adding 135 model components to the UV plane model.
! The established model now contains 292 components and 1.77707 Jy
![Exited script file: muppet]
wmap "J1153+8058_S_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.532 x 5.959 at 59.96 degrees (North through East)
! Clean map  min=-0.0035638  max=1.1541 Jy/beam
! Writing clean map to FITS file: J1153+8058_S_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.15409 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000802899 
device "J1153+8058_S_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1153+8058_S_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.20871 0.20871 0.41742 0.834841 1.66968 3.33936 6.67873 13.3575 26.7149 53.4298
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0024 
print "peak=",int(peak_flux*1000)/1000
! peak= 1.154 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.532 x 5.959 at 59.96 degrees (North through East)
! Clean map  min=-0.0035638  max=1.1541 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1153+8058_S_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1153+8058_S_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1153+8058_S_2006_02_14_yyk_uvs.log closed on Wed Jul  5 12:03:58 2006