! Started logfile: J1104+7932_X_2006_02_23_yyk_uvs.log on Wed Jul 5 12:02:29 2006 obs J1104+7932_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1104+7932_X_2006_02_23_yyk_uva.fits ! AN table 1: 883 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992676 visibilities/baseline/integration-bin. ! Found source: J1104+7932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2406 lines of history. ! ! Reading 157776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1104+7932_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.140884 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6176 mas, bmaj=2.803 mas, bpa=10.32 degrees ! Estimated noise=1.23665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0875677 Jy ! Component: 100 - total flux cleaned = 0.108558 Jy ! Total flux subtracted in 100 components = 0.108558 Jy ! Clean residual min=-0.014058 max=0.030436 Jy/beam ! Clean residual mean=-0.000030 rms=0.004200 Jy/beam ! Combined flux in latest and established models = 0.108558 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.108558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088555Jy sigma=1.632476 ! Fit after self-cal, rms=0.087873Jy sigma=1.621582 ! Inverting map ! Added new window around map position (3.6, 1.4). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296904 Jy ! Component: 100 - total flux cleaned = 0.0342229 Jy ! Total flux subtracted in 100 components = 0.0342229 Jy ! Clean residual min=-0.009831 max=0.022985 Jy/beam ! Clean residual mean=-0.000022 rms=0.002938 Jy/beam ! Combined flux in latest and established models = 0.142781 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.142781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078396Jy sigma=1.386881 ! Fit after self-cal, rms=0.075682Jy sigma=1.332624 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.848 mas, bmaj=2.906 mas, bpa=8.676 degrees ! Estimated noise=0.640017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0229543 Jy ! Component: 100 - total flux cleaned = 0.0327588 Jy ! Component: 150 - total flux cleaned = 0.0367662 Jy ! Component: 200 - total flux cleaned = 0.0384722 Jy ! Total flux subtracted in 200 components = 0.0384722 Jy ! Clean residual min=-0.008974 max=0.016964 Jy/beam ! Clean residual mean=-0.000109 rms=0.003001 Jy/beam ! Combined flux in latest and established models = 0.181253 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 47 components and 0.181253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071692Jy sigma=1.216877 ! Fit after self-cal, rms=0.070882Jy sigma=1.199026 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.848 x 2.906 at 8.676 degrees (North through East) ! Clean map min=-0.0089567 max=0.10135 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01776 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.90 HN 1.08 KP 0.92 ! LA 0.89 MK 1.03 NL 1.14 OV 1.00 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.070882Jy sigma=1.199026 ! Fit after self-cal, rms=0.070438Jy sigma=1.186610 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070438Jy sigma=1.186610 ! Fit after self-cal, rms=0.070448Jy sigma=1.186632 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8604 mas, bmaj=2.909 mas, bpa=8.831 degrees ! Estimated noise=0.636656 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6.8, 4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157161 Jy ! Component: 100 - total flux cleaned = 0.0215452 Jy ! Component: 150 - total flux cleaned = 0.0218112 Jy ! Component: 200 - total flux cleaned = 0.0219431 Jy ! Total flux subtracted in 200 components = 0.0219431 Jy ! Clean residual min=-0.006560 max=0.009119 Jy/beam ! Clean residual mean=-0.000065 rms=0.001856 Jy/beam ! Combined flux in latest and established models = 0.203196 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 84 components and 0.203196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068162Jy sigma=1.126790 ! Fit after self-cal, rms=0.068080Jy sigma=1.122424 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068080Jy sigma=1.122424 ! Fit after self-cal, rms=0.062802Jy sigma=1.037865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948828 Jy ! Component: 100 - total flux cleaned = 0.0131103 Jy ! Component: 150 - total flux cleaned = 0.0156915 Jy ! Component: 200 - total flux cleaned = 0.0166555 Jy ! Total flux subtracted in 200 components = 0.0166555 Jy ! Clean residual min=-0.005025 max=0.004925 Jy/beam ! Clean residual mean=-0.000025 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.219852 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 114 components and 0.219851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061594Jy sigma=1.008009 ! Fit after self-cal, rms=0.061326Jy sigma=1.004218 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8604 x 2.909 at 8.831 degrees (North through East) ! Clean map min=-0.0047464 max=0.1003 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061326Jy sigma=1.004218 ! Fit after self-cal, rms=0.060018Jy sigma=0.979375 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060018Jy sigma=0.979375 ! Fit after self-cal, rms=0.060004Jy sigma=0.978913 ! Inverting map and beam ! Estimated beam: bmin=0.8612 mas, bmaj=2.896 mas, bpa=8.694 degrees ! Estimated noise=0.635711 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210538 Jy ! Component: 100 - total flux cleaned = 0.00266671 Jy ! Component: 150 - total flux cleaned = 0.00317008 Jy ! Component: 200 - total flux cleaned = 0.00353684 Jy ! Total flux subtracted in 200 components = 0.00353684 Jy ! Clean residual min=-0.003411 max=0.004055 Jy/beam ! Clean residual mean=-0.000024 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.223388 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 136 components and 0.223388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059763Jy sigma=0.972665 ! Fit after self-cal, rms=0.059764Jy sigma=0.972493 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059764Jy sigma=0.972493 ! Fit after self-cal, rms=0.060582Jy sigma=0.960383 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060582Jy sigma=0.960383 ! Fit after self-cal, rms=0.060595Jy sigma=0.960307 ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.9 mas, bpa=8.69 degrees ! Estimated noise=0.638963 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155416 Jy ! Component: 100 - total flux cleaned = 0.00207186 Jy ! Component: 150 - total flux cleaned = 0.00247189 Jy ! Component: 200 - total flux cleaned = 0.00284549 Jy ! Total flux subtracted in 200 components = 0.00284549 Jy ! Clean residual min=-0.002999 max=0.003489 Jy/beam ! Clean residual mean=-0.000023 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.226234 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 149 components and 0.226234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060440Jy sigma=0.956503 ! Fit after self-cal, rms=0.060442Jy sigma=0.956430 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=3.439 mas, bpa=7.438 degrees ! Estimated noise=0.821134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244042 Jy ! Component: 100 - total flux cleaned = 0.00279096 Jy ! Component: 150 - total flux cleaned = 0.00288938 Jy ! Component: 200 - total flux cleaned = 0.002974 Jy ! Total flux subtracted in 200 components = 0.002974 Jy ! Clean residual min=-0.002915 max=0.003548 Jy/beam ! Clean residual mean=-0.000036 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 0.229208 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 164 components and 0.229208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060467Jy sigma=0.955452 ! Fit after self-cal, rms=0.060459Jy sigma=0.955118 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6217 mas, bmaj=2.776 mas, bpa=10.26 degrees ! Estimated noise=1.25103 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.103497 Jy ! Component: 100 - total flux cleaned = 0.137051 Jy ! Component: 150 - total flux cleaned = 0.154461 Jy ! Component: 200 - total flux cleaned = 0.165318 Jy ! Total flux subtracted in 200 components = 0.165318 Jy ! Clean residual min=-0.006097 max=0.006923 Jy/beam ! Clean residual mean=-0.000018 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.165318 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.165318 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.9 mas, bpa=8.69 degrees ! Estimated noise=0.638963 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, 2.2). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175526 Jy ! Component: 100 - total flux cleaned = 0.0290338 Jy ! Component: 150 - total flux cleaned = 0.0375257 Jy ! Component: 200 - total flux cleaned = 0.0439699 Jy ! Total flux subtracted in 200 components = 0.0439699 Jy ! Clean residual min=-0.003831 max=0.005741 Jy/beam ! Clean residual mean=-0.000049 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.209288 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 79 components and 0.209288 Jy ! Inverting map ! Added new window around map position (-3.8, -1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00646894 Jy ! Component: 100 - total flux cleaned = 0.0105443 Jy ! Component: 150 - total flux cleaned = 0.0133907 Jy ! Component: 200 - total flux cleaned = 0.0154293 Jy ! Total flux subtracted in 200 components = 0.0154293 Jy ! Clean residual min=-0.002384 max=0.002438 Jy/beam ! Clean residual mean=-0.000019 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.224717 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 114 components and 0.224717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.181 mas, bmaj=3.439 mas, bpa=7.438 degrees ! Estimated noise=0.821134 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331868 Jy ! Component: 100 - total flux cleaned = 0.00542719 Jy ! Component: 150 - total flux cleaned = 0.00627433 Jy ! Component: 200 - total flux cleaned = 0.00692584 Jy ! Total flux subtracted in 200 components = 0.00692584 Jy ! Clean residual min=-0.002561 max=0.002235 Jy/beam ! Clean residual mean=-0.000016 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 0.231643 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 151 components and 0.231643 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8655 mas, bmaj=2.9 mas, bpa=8.69 degrees ! Estimated noise=0.638963 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000195143 Jy ! Component: 100 - total flux cleaned = 0.000374054 Jy ! Component: 150 - total flux cleaned = 0.000683452 Jy ! Component: 200 - total flux cleaned = 0.000731342 Jy ! Total flux subtracted in 200 components = 0.000731342 Jy ! Clean residual min=-0.001799 max=0.001885 Jy/beam ! Clean residual mean=-0.000007 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.232375 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 175 components and 0.232375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060112Jy sigma=0.945851 ! Fit after self-cal, rms=0.060063Jy sigma=0.944959 wmodel J1104+7932_X_2006_02_23_yyk\_map.mod ! Writing 175 model components to file: J1104+7932_X_2006_02_23_yyk_map.mod wobs J1104+7932_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1104+7932_X_2006_02_23_yyk_uvs.fits wwins J1104+7932_X_2006_02_23_yyk\_map.win ! wwins: Wrote 6 windows to J1104+7932_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000151598 Jy ! Component: 100 - total flux cleaned = -8.981e-05 Jy ! Component: 150 - total flux cleaned = 0.000178102 Jy ! Component: 200 - total flux cleaned = 0.000377434 Jy ! Component: 250 - total flux cleaned = 0.000404525 Jy ! Component: 300 - total flux cleaned = 0.000404173 Jy ! Component: 350 - total flux cleaned = 0.000429372 Jy ! Component: 400 - total flux cleaned = 0.000479301 Jy ! Component: 450 - total flux cleaned = 0.000406291 Jy ! Component: 500 - total flux cleaned = 0.000382691 Jy ! Component: 550 - total flux cleaned = 0.000359215 Jy ! Component: 600 - total flux cleaned = 0.000381188 Jy ! Component: 650 - total flux cleaned = 0.000269304 Jy ! Component: 700 - total flux cleaned = 0.000269445 Jy ! Component: 750 - total flux cleaned = 0.000290106 Jy ! Component: 800 - total flux cleaned = 0.000268289 Jy ! Component: 850 - total flux cleaned = 0.000268442 Jy ! Component: 900 - total flux cleaned = 0.000288474 Jy ! Component: 950 - total flux cleaned = 0.000348107 Jy ! Component: 1000 - total flux cleaned = 0.000367697 Jy ! Component: 1050 - total flux cleaned = 0.000425606 Jy ! Component: 1100 - total flux cleaned = 0.000463589 Jy ! Component: 1150 - total flux cleaned = 0.000519808 Jy ! Component: 1200 - total flux cleaned = 0.000574994 Jy ! Component: 1250 - total flux cleaned = 0.00066586 Jy ! Component: 1300 - total flux cleaned = 0.000737672 Jy ! Component: 1350 - total flux cleaned = 0.000808759 Jy ! Component: 1400 - total flux cleaned = 0.000913904 Jy ! Component: 1450 - total flux cleaned = 0.00105217 Jy ! Component: 1500 - total flux cleaned = 0.00113729 Jy ! Component: 1550 - total flux cleaned = 0.00118792 Jy ! Component: 1600 - total flux cleaned = 0.00125489 Jy ! Component: 1650 - total flux cleaned = 0.00133732 Jy ! Component: 1700 - total flux cleaned = 0.00140257 Jy ! Component: 1750 - total flux cleaned = 0.00143501 Jy ! Component: 1800 - total flux cleaned = 0.00149912 Jy ! Component: 1850 - total flux cleaned = 0.00157866 Jy ! Component: 1900 - total flux cleaned = 0.00162584 Jy ! Component: 1950 - total flux cleaned = 0.00162589 Jy ! Component: 2000 - total flux cleaned = 0.00170339 Jy ! Total flux subtracted in 2048 components = 0.00179538 Jy ! Clean residual min=-0.000884 max=0.000988 Jy/beam ! Clean residual mean=0.000004 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.23417 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 324 components and 0.23417 Jy ![Exited script file: muppet] wmap "J1104+7932_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8655 x 2.9 at 8.69 degrees (North through East) ! Clean map min=-0.0016138 max=0.095679 Jy/beam ! Writing clean map to FITS file: J1104+7932_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0956787 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000299587 device "J1104+7932_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1104+7932_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.939354 0.939354 1.87871 3.75741 7.51483 15.0297 30.0593 60.1186 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8655 x 2.9 at 8.69 degrees (North through East) ! Clean map min=-0.0016138 max=0.095679 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1104+7932_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1104+7932_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1104+7932_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:02:56 2006