! Started logfile: J1104+7932_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:02:02 2006 obs J1104+7932_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1104+7932_S_2006_02_23_yyk_uva.fits ! AN table 1: 883 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.992676 visibilities/baseline/integration-bin. ! Found source: J1104+7932 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2432 lines of history. ! ! Reading 157776 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1104+7932_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.325809 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.41 mas, bmaj=10.31 mas, bpa=10.3 degrees ! Estimated noise=1.41801 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.223941 Jy ! Component: 100 - total flux cleaned = 0.313711 Jy ! Total flux subtracted in 100 components = 0.313711 Jy ! Clean residual min=-0.026241 max=0.060711 Jy/beam ! Clean residual mean=-0.000054 rms=0.009423 Jy/beam ! Combined flux in latest and established models = 0.313711 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.313711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141347Jy sigma=2.473623 ! Fit after self-cal, rms=0.136489Jy sigma=2.403458 ! Inverting map ! Added new window around map position (-4.5, -2.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0693356 Jy ! Component: 100 - total flux cleaned = 0.101603 Jy ! Total flux subtracted in 100 components = 0.101603 Jy ! Clean residual min=-0.016461 max=0.027024 Jy/beam ! Clean residual mean=-0.000062 rms=0.004710 Jy/beam ! Combined flux in latest and established models = 0.415314 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.415314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099568Jy sigma=1.653001 ! Fit after self-cal, rms=0.096079Jy sigma=1.595027 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=10.64 mas, bpa=10.62 degrees ! Estimated noise=0.680297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0353811 Jy ! Component: 100 - total flux cleaned = 0.0505174 Jy ! Component: 150 - total flux cleaned = 0.0566909 Jy ! Component: 200 - total flux cleaned = 0.0603182 Jy ! Total flux subtracted in 200 components = 0.0603182 Jy ! Clean residual min=-0.010786 max=0.010920 Jy/beam ! Clean residual mean=-0.000134 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 0.475632 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 74 components and 0.475632 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084574Jy sigma=1.375594 ! Fit after self-cal, rms=0.083750Jy sigma=1.360127 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.171 x 10.64 at 10.62 degrees (North through East) ! Clean map min=-0.0091499 max=0.26378 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03125 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.92 HN 0.95 KP 0.92 ! LA 1.17 MK 0.89 NL 1.00 OV 0.95 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00718 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.99 KP 0.94 ! LA 1.16 MK 0.96 NL 1.04 OV 0.98 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.959712 ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.97 HN 1.04 KP 0.96 ! LA 0.92 MK 1.11 NL 1.14 OV 1.01 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0239 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.96 KP 0.89 ! LA 0.79 MK 1.13 NL 1.10 OV 0.88 ! PT 0.93 SC 1.13 ! ! ! Fit before self-cal, rms=0.083750Jy sigma=1.360127 ! Fit after self-cal, rms=0.073663Jy sigma=1.168982 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073663Jy sigma=1.168982 ! Fit after self-cal, rms=0.073675Jy sigma=1.169308 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.223 mas, bmaj=10.57 mas, bpa=10.38 degrees ! Estimated noise=0.680877 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418183 Jy ! Component: 100 - total flux cleaned = 0.00388191 Jy ! Component: 150 - total flux cleaned = 0.00373862 Jy ! Component: 200 - total flux cleaned = 0.0038362 Jy ! Total flux subtracted in 200 components = 0.0038362 Jy ! Clean residual min=-0.004418 max=0.003903 Jy/beam ! Clean residual mean=0.000012 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.479469 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 115 components and 0.479469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073110Jy sigma=1.159244 ! Fit after self-cal, rms=0.073074Jy sigma=1.158940 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073074Jy sigma=1.158940 ! Fit after self-cal, rms=0.067464Jy sigma=1.068637 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000663578 Jy ! Component: 100 - total flux cleaned = 0.000970836 Jy ! Component: 150 - total flux cleaned = 0.00132662 Jy ! Component: 200 - total flux cleaned = 0.00132639 Jy ! Total flux subtracted in 200 components = 0.00132639 Jy ! Clean residual min=-0.004400 max=0.003851 Jy/beam ! Clean residual mean=0.000012 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.480795 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 147 components and 0.480795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067158Jy sigma=1.064100 ! Fit after self-cal, rms=0.066888Jy sigma=1.060804 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.223 x 10.57 at 10.38 degrees (North through East) ! Clean map min=-0.0047847 max=0.26478 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066888Jy sigma=1.060804 ! Fit after self-cal, rms=0.063812Jy sigma=0.995103 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063812Jy sigma=0.995103 ! Fit after self-cal, rms=0.063781Jy sigma=0.994791 ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=10.59 mas, bpa=10.26 degrees ! Estimated noise=0.676491 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519839 Jy ! Component: 100 - total flux cleaned = 0.000247306 Jy ! Component: 150 - total flux cleaned = 2.2778e-05 Jy ! Component: 200 - total flux cleaned = -0.000170794 Jy ! Total flux subtracted in 200 components = -0.000170794 Jy ! Clean residual min=-0.003499 max=0.003409 Jy/beam ! Clean residual mean=0.000014 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.480624 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 163 components and 0.480624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063588Jy sigma=0.991190 ! Fit after self-cal, rms=0.063568Jy sigma=0.990731 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063568Jy sigma=0.990731 ! Fit after self-cal, rms=0.062535Jy sigma=0.957798 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062535Jy sigma=0.957798 ! Fit after self-cal, rms=0.062537Jy sigma=0.957772 ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=10.6 mas, bpa=10.21 degrees ! Estimated noise=0.675346 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000335241 Jy ! Component: 100 - total flux cleaned = -2.00883e-05 Jy ! Component: 150 - total flux cleaned = -0.000202634 Jy ! Component: 200 - total flux cleaned = -0.000259794 Jy ! Total flux subtracted in 200 components = -0.000259794 Jy ! Clean residual min=-0.003283 max=0.003217 Jy/beam ! Clean residual mean=0.000011 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.480364 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 180 components and 0.480364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062411Jy sigma=0.955255 ! Fit after self-cal, rms=0.062403Jy sigma=0.954912 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.479 mas, bmaj=11.71 mas, bpa=12.19 degrees ! Estimated noise=0.849447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000278628 Jy ! Component: 100 - total flux cleaned = -0.000682145 Jy ! Component: 150 - total flux cleaned = -0.000771095 Jy ! Component: 200 - total flux cleaned = -0.000848388 Jy ! Total flux subtracted in 200 components = -0.000848388 Jy ! Clean residual min=-0.002780 max=0.003751 Jy/beam ! Clean residual mean=0.000022 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.479516 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 198 components and 0.479516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062347Jy sigma=0.953854 ! Fit after self-cal, rms=0.062335Jy sigma=0.953501 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=10.22 mas, bpa=10.24 degrees ! Estimated noise=1.38879 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.225341 Jy ! Component: 100 - total flux cleaned = 0.322329 Jy ! Component: 150 - total flux cleaned = 0.378047 Jy ! Component: 200 - total flux cleaned = 0.410815 Jy ! Total flux subtracted in 200 components = 0.410815 Jy ! Clean residual min=-0.007098 max=0.012496 Jy/beam ! Clean residual mean=-0.000017 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.410815 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.410815 Jy ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=10.6 mas, bpa=10.21 degrees ! Estimated noise=0.675346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326997 Jy ! Component: 100 - total flux cleaned = 0.0480223 Jy ! Component: 150 - total flux cleaned = 0.0570929 Jy ! Component: 200 - total flux cleaned = 0.0622266 Jy ! Total flux subtracted in 200 components = 0.0622266 Jy ! Clean residual min=-0.003407 max=0.003846 Jy/beam ! Clean residual mean=0.000014 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.473042 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 94 components and 0.473042 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.479 mas, bmaj=11.71 mas, bpa=12.19 degrees ! Estimated noise=0.849447 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00425475 Jy ! Component: 100 - total flux cleaned = 0.00528727 Jy ! Component: 150 - total flux cleaned = 0.00580477 Jy ! Component: 200 - total flux cleaned = 0.00597179 Jy ! Total flux subtracted in 200 components = 0.00597179 Jy ! Clean residual min=-0.003076 max=0.003563 Jy/beam ! Clean residual mean=0.000020 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 0.479014 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 148 components and 0.479014 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=10.6 mas, bpa=10.21 degrees ! Estimated noise=0.675346 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109372 Jy ! Component: 100 - total flux cleaned = 0.00165995 Jy ! Component: 150 - total flux cleaned = 0.00194142 Jy ! Component: 200 - total flux cleaned = 0.00200543 Jy ! Total flux subtracted in 200 components = 0.00200543 Jy ! Clean residual min=-0.002978 max=0.003182 Jy/beam ! Clean residual mean=0.000011 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.481019 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 183 components and 0.481019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062435Jy sigma=0.954969 ! Fit after self-cal, rms=0.062342Jy sigma=0.953058 wmodel J1104+7932_S_2006_02_23_yyk\_map.mod ! Writing 183 model components to file: J1104+7932_S_2006_02_23_yyk_map.mod wobs J1104+7932_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1104+7932_S_2006_02_23_yyk_uvs.fits wwins J1104+7932_S_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J1104+7932_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0006709 Jy ! Component: 100 - total flux cleaned = 0.00122185 Jy ! Component: 150 - total flux cleaned = 0.00180622 Jy ! Component: 200 - total flux cleaned = 0.0023767 Jy ! Component: 250 - total flux cleaned = 0.00252958 Jy ! Component: 300 - total flux cleaned = 0.00252797 Jy ! Component: 350 - total flux cleaned = 0.00259401 Jy ! Component: 400 - total flux cleaned = 0.00272279 Jy ! Component: 450 - total flux cleaned = 0.00300332 Jy ! Component: 500 - total flux cleaned = 0.0031233 Jy ! Component: 550 - total flux cleaned = 0.00338647 Jy ! Component: 600 - total flux cleaned = 0.00352831 Jy ! Component: 650 - total flux cleaned = 0.00375024 Jy ! Component: 700 - total flux cleaned = 0.004074 Jy ! Component: 750 - total flux cleaned = 0.0042059 Jy ! Component: 800 - total flux cleaned = 0.00443783 Jy ! Component: 850 - total flux cleaned = 0.00466427 Jy ! Component: 900 - total flux cleaned = 0.00483564 Jy ! Component: 950 - total flux cleaned = 0.0049079 Jy ! Component: 1000 - total flux cleaned = 0.00509664 Jy ! Component: 1050 - total flux cleaned = 0.00525847 Jy ! Component: 1100 - total flux cleaned = 0.00541781 Jy ! Component: 1150 - total flux cleaned = 0.00557416 Jy ! Component: 1200 - total flux cleaned = 0.00572803 Jy ! Component: 1250 - total flux cleaned = 0.00585769 Jy ! Component: 1300 - total flux cleaned = 0.00602749 Jy ! Component: 1350 - total flux cleaned = 0.00623558 Jy ! Component: 1400 - total flux cleaned = 0.0063377 Jy ! Component: 1450 - total flux cleaned = 0.00645853 Jy ! Component: 1500 - total flux cleaned = 0.00655801 Jy ! Component: 1550 - total flux cleaned = 0.00673449 Jy ! Component: 1600 - total flux cleaned = 0.0068116 Jy ! Component: 1650 - total flux cleaned = 0.00692592 Jy ! Component: 1700 - total flux cleaned = 0.00701993 Jy ! Component: 1750 - total flux cleaned = 0.00713107 Jy ! Component: 1800 - total flux cleaned = 0.00720398 Jy ! Component: 1850 - total flux cleaned = 0.00731199 Jy ! Component: 1900 - total flux cleaned = 0.00731161 Jy ! Component: 1950 - total flux cleaned = 0.00741728 Jy ! Component: 2000 - total flux cleaned = 0.00741723 Jy ! Total flux subtracted in 2048 components = 0.00748603 Jy ! Clean residual min=-0.001060 max=0.001041 Jy/beam ! Clean residual mean=-0.000003 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.488505 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 342 components and 0.488505 Jy ![Exited script file: muppet] wmap "J1104+7932_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 10.6 at 10.21 degrees (North through East) ! Clean map min=-0.0027329 max=0.26121 Jy/beam ! Writing clean map to FITS file: J1104+7932_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.261205 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00036012 device "J1104+7932_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1104+7932_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.413606 0.413606 0.827212 1.65442 3.30885 6.6177 13.2354 26.4708 52.9416 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.261 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 10.6 at 10.21 degrees (North through East) ! Clean map min=-0.0027329 max=0.26121 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1104+7932_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1104+7932_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1104+7932_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:02:28 2006