! Started logfile: J1104+7658_X_2006_02_14_yyk_uvs.log on Wed Jul 5 12:01:41 2006 obs J1104+7658_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1104+7658_X_2006_02_14_yyk_uva.fits ! AN table 1: 878 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.617211 visibilities/baseline/integration-bin. ! Found source: J1104+7658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2304 lines of history. ! ! Reading 97544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1104+7658_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0820891 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.124 mas, bmaj=2.969 mas, bpa=-17.58 degrees ! Estimated noise=1.49753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0493612 Jy ! Component: 100 - total flux cleaned = 0.0605098 Jy ! Total flux subtracted in 100 components = 0.0605098 Jy ! Clean residual min=-0.005990 max=0.007075 Jy/beam ! Clean residual mean=-0.000007 rms=0.001775 Jy/beam ! Combined flux in latest and established models = 0.0605098 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0605098 Jy ! ! Correcting IF 1. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.055069Jy sigma=1.114261 ! Fit after self-cal, rms=0.054849Jy sigma=1.104783 ! Inverting map and beam ! Estimated beam: bmin=1.124 mas, bmaj=2.969 mas, bpa=-17.58 degrees ! Estimated noise=1.49753 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.455 mas, bmaj=3.093 mas, bpa=-15.19 degrees ! Estimated noise=0.892338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628253 Jy ! Component: 100 - total flux cleaned = 0.0089986 Jy ! Component: 150 - total flux cleaned = 0.00998269 Jy ! Component: 200 - total flux cleaned = 0.0103593 Jy ! Total flux subtracted in 200 components = 0.0103593 Jy ! Clean residual min=-0.002715 max=0.003100 Jy/beam ! Clean residual mean=-0.000004 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.0708691 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 0.0708691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054280Jy sigma=1.093352 ! Fit after self-cal, rms=0.054270Jy sigma=1.093166 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.455 x 3.093 at -15.19 degrees (North through East) ! Clean map min=-0.0026818 max=0.06014 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.988043 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.12 KP 1.05 ! LA 0.99 MK 1.00* NL 1.01 OV 0.95 ! PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.00114 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 1.03 KP 0.95 ! LA 0.88 MK 1.00* NL 0.99 OV 1.04 ! PT 1.10 SC 1.00* ! ! ! Fit before self-cal, rms=0.054270Jy sigma=1.093166 ! Fit after self-cal, rms=0.054053Jy sigma=1.090184 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054053Jy sigma=1.090184 ! Fit after self-cal, rms=0.054057Jy sigma=1.090309 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.496 mas, bmaj=3.048 mas, bpa=-14.22 degrees ! Estimated noise=0.893089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000904592 Jy ! Component: 100 - total flux cleaned = 0.000939307 Jy ! Component: 150 - total flux cleaned = 0.000966424 Jy ! Component: 200 - total flux cleaned = 0.000919873 Jy ! Total flux subtracted in 200 components = 0.000919873 Jy ! Clean residual min=-0.002563 max=0.003087 Jy/beam ! Clean residual mean=-0.000003 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.071789 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.071789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054028Jy sigma=1.089619 ! Fit after self-cal, rms=0.054043Jy sigma=1.089928 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054043Jy sigma=1.089928 ! Fit after self-cal, rms=0.047200Jy sigma=0.956979 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00292253 Jy ! Component: 100 - total flux cleaned = 0.00253024 Jy ! Component: 150 - total flux cleaned = 0.00220428 Jy ! Component: 200 - total flux cleaned = 0.00190951 Jy ! Total flux subtracted in 200 components = 0.00190951 Jy ! Clean residual min=-0.002831 max=0.003047 Jy/beam ! Clean residual mean=0.000004 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0736985 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.0736985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046631Jy sigma=0.947448 ! Fit after self-cal, rms=0.046473Jy sigma=0.944311 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.496 x 3.048 at -14.22 degrees (North through East) ! Clean map min=-0.0028483 max=0.06577 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=3.346 mas, bpa=-4.737 degrees ! Estimated noise=0.990218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017506 Jy ! Component: 100 - total flux cleaned = -0.000147629 Jy ! Component: 150 - total flux cleaned = -0.000112058 Jy ! Component: 200 - total flux cleaned = -8.35856e-05 Jy ! Total flux subtracted in 200 components = -8.35856e-05 Jy ! Clean residual min=-0.003255 max=0.002888 Jy/beam ! Clean residual mean=0.000009 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.0736149 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.0736149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046461Jy sigma=0.944068 ! Fit after self-cal, rms=0.046445Jy sigma=0.943723 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.14 mas, bmaj=2.939 mas, bpa=-17.24 degrees ! Estimated noise=1.50275 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567029 Jy ! Component: 100 - total flux cleaned = 0.0659209 Jy ! Component: 150 - total flux cleaned = 0.0696927 Jy ! Component: 200 - total flux cleaned = 0.0710832 Jy ! Total flux subtracted in 200 components = 0.0710832 Jy ! Clean residual min=-0.005307 max=0.005828 Jy/beam ! Clean residual mean=0.000003 rms=0.001364 Jy/beam ! Combined flux in latest and established models = 0.0710832 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0710832 Jy ! Inverting map and beam ! Estimated beam: bmin=1.496 mas, bmaj=3.048 mas, bpa=-14.22 degrees ! Estimated noise=0.893089 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203803 Jy ! Component: 100 - total flux cleaned = 0.00209851 Jy ! Component: 150 - total flux cleaned = 0.0021396 Jy ! Component: 200 - total flux cleaned = 0.00216985 Jy ! Total flux subtracted in 200 components = 0.00216985 Jy ! Clean residual min=-0.002965 max=0.002948 Jy/beam ! Clean residual mean=0.000005 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.073253 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.073253 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=3.346 mas, bpa=-4.737 degrees ! Estimated noise=0.990218 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00037695 Jy ! Component: 100 - total flux cleaned = 0.00043125 Jy ! Component: 150 - total flux cleaned = 0.000470196 Jy ! Component: 200 - total flux cleaned = 0.000491646 Jy ! Total flux subtracted in 200 components = 0.000491646 Jy ! Clean residual min=-0.003099 max=0.002825 Jy/beam ! Clean residual mean=0.000010 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.0737447 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 58 components and 0.0737447 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.496 mas, bmaj=3.048 mas, bpa=-14.22 degrees ! Estimated noise=0.893089 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000186693 Jy ! Component: 100 - total flux cleaned = -0.000219299 Jy ! Component: 150 - total flux cleaned = -0.000234456 Jy ! Component: 200 - total flux cleaned = -0.00024845 Jy ! Total flux subtracted in 200 components = -0.00024845 Jy ! Clean residual min=-0.002777 max=0.002984 Jy/beam ! Clean residual mean=0.000006 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.0734962 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.0734962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046370Jy sigma=0.942630 ! Fit after self-cal, rms=0.046359Jy sigma=0.942532 wmodel J1104+7658_X_2006_02_14_yyk\_map.mod ! Writing 68 model components to file: J1104+7658_X_2006_02_14_yyk_map.mod wobs J1104+7658_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1104+7658_X_2006_02_14_yyk_uvs.fits wwins J1104+7658_X_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J1104+7658_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012544 Jy ! Component: 100 - total flux cleaned = -2.92762e-06 Jy ! Component: 150 - total flux cleaned = -4.29256e-05 Jy ! Component: 200 - total flux cleaned = -0.000117954 Jy ! Component: 250 - total flux cleaned = -0.000360071 Jy ! Component: 300 - total flux cleaned = -0.000723532 Jy ! Component: 350 - total flux cleaned = -0.00097502 Jy ! Component: 400 - total flux cleaned = -0.00118568 Jy ! Component: 450 - total flux cleaned = -0.00144626 Jy ! Component: 500 - total flux cleaned = -0.00175249 Jy ! Component: 550 - total flux cleaned = -0.001941 Jy ! Component: 600 - total flux cleaned = -0.00214906 Jy ! Component: 650 - total flux cleaned = -0.0022747 Jy ! Component: 700 - total flux cleaned = -0.00239762 Jy ! Component: 750 - total flux cleaned = -0.00254139 Jy ! Component: 800 - total flux cleaned = -0.00261124 Jy ! Component: 850 - total flux cleaned = -0.00267974 Jy ! Component: 900 - total flux cleaned = -0.0027916 Jy ! Component: 950 - total flux cleaned = -0.00290015 Jy ! Component: 1000 - total flux cleaned = -0.00298452 Jy ! Component: 1050 - total flux cleaned = -0.00302605 Jy ! Component: 1100 - total flux cleaned = -0.00312732 Jy ! Component: 1150 - total flux cleaned = -0.00314708 Jy ! Component: 1200 - total flux cleaned = -0.00314707 Jy ! Component: 1250 - total flux cleaned = -0.00305231 Jy ! Component: 1300 - total flux cleaned = -0.00299641 Jy ! Component: 1350 - total flux cleaned = -0.00294178 Jy ! Component: 1400 - total flux cleaned = -0.00292379 Jy ! Component: 1450 - total flux cleaned = -0.00285323 Jy ! Component: 1500 - total flux cleaned = -0.0027321 Jy ! Component: 1550 - total flux cleaned = -0.00266353 Jy ! Component: 1600 - total flux cleaned = -0.0025792 Jy ! Component: 1650 - total flux cleaned = -0.00246277 Jy ! Component: 1700 - total flux cleaned = -0.00236428 Jy ! Component: 1750 - total flux cleaned = -0.00223462 Jy ! Component: 1800 - total flux cleaned = -0.0021064 Jy ! Component: 1850 - total flux cleaned = -0.00201109 Jy ! Component: 1900 - total flux cleaned = -0.00186979 Jy ! Component: 1950 - total flux cleaned = -0.00182298 Jy ! Component: 2000 - total flux cleaned = -0.00166858 Jy ! Total flux subtracted in 2048 components = -0.00160732 Jy ! Clean residual min=-0.000806 max=0.000815 Jy/beam ! Clean residual mean=0.000001 rms=0.000292 Jy/beam ! Combined flux in latest and established models = 0.0718889 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 190 components and 0.0718889 Jy ![Exited script file: muppet] wmap "J1104+7658_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.496 x 3.048 at -14.22 degrees (North through East) ! Clean map min=-0.0021654 max=0.065668 Jy/beam ! Writing clean map to FITS file: J1104+7658_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0656682 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000290948 device "J1104+7658_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1104+7658_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.32917 1.32917 2.65835 5.31669 10.6334 21.2668 42.5336 85.0671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.496 x 3.048 at -14.22 degrees (North through East) ! Clean map min=-0.0021654 max=0.065668 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1104+7658_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1104+7658_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1104+7658_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 12:02:02 2006