! Started logfile: J1058+8114_X_2006_02_16_yyk_uvs.log on Wed Jul 5 12:00:52 2006 obs J1058+8114_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1058+8114_X_2006_02_16_yyk_uva.fits ! AN table 1: 470 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.743262 visibilities/baseline/integration-bin. ! Found source: J1058+8114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 62880 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1058+8114_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.65138 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7095 mas, bmaj=1.967 mas, bpa=-77.35 degrees ! Estimated noise=1.66844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.507109 Jy ! Component: 100 - total flux cleaned = 0.648813 Jy ! Total flux subtracted in 100 components = 0.648813 Jy ! Clean residual min=-0.032480 max=0.073873 Jy/beam ! Clean residual mean=-0.000428 rms=0.009264 Jy/beam ! Combined flux in latest and established models = 0.648813 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.648813 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.215163Jy sigma=2.974975 ! Fit after self-cal, rms=0.209869Jy sigma=2.862522 ! Inverting map and beam ! Estimated beam: bmin=0.7095 mas, bmaj=1.967 mas, bpa=-77.35 degrees ! Estimated noise=1.66844 mJy/beam. ! Added new window around map position (1.4, -1.6). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0853454 Jy ! Component: 100 - total flux cleaned = 0.124984 Jy ! Total flux subtracted in 100 components = 0.124984 Jy ! Clean residual min=-0.024544 max=0.051513 Jy/beam ! Clean residual mean=-0.000203 rms=0.006097 Jy/beam ! Combined flux in latest and established models = 0.773798 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.773798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177839Jy sigma=2.252157 ! Fit after self-cal, rms=0.176863Jy sigma=2.168216 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8906 mas, bmaj=2.25 mas, bpa=-80.14 degrees ! Estimated noise=1.13928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 1.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554411 Jy ! Component: 100 - total flux cleaned = 0.0711042 Jy ! Component: 150 - total flux cleaned = 0.0794075 Jy ! Component: 200 - total flux cleaned = 0.0851092 Jy ! Total flux subtracted in 200 components = 0.0851092 Jy ! Clean residual min=-0.022956 max=0.019722 Jy/beam ! Clean residual mean=0.000038 rms=0.005102 Jy/beam ! Combined flux in latest and established models = 0.858907 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 53 components and 0.858907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160096Jy sigma=1.874713 ! Fit after self-cal, rms=0.159614Jy sigma=1.871559 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8906 x 2.25 at -80.14 degrees (North through East) ! Clean map min=-0.023038 max=0.56171 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.981989 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 0.97 ! LA 0.99 MK 0.98 NL 1.21 OV 0.94 ! PT 1.03 SC 1.11 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996532 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 0.99 KP 0.91 ! LA 0.94 MK 0.97 NL 1.20 OV 0.94 ! PT 1.06 SC 1.08 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.993914 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.92 KP 0.84 ! LA 0.96 MK 0.98 NL 1.17 OV 0.96 ! PT 1.08 SC 1.08 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.976227 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.05 HN 0.95 KP 0.87 ! LA 0.95 MK 0.99 NL 1.14 OV 0.98 ! PT 1.17 SC 1.11 ! ! ! Fit before self-cal, rms=0.159614Jy sigma=1.871559 ! Fit after self-cal, rms=0.146297Jy sigma=1.571096 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146297Jy sigma=1.571096 ! Fit after self-cal, rms=0.146286Jy sigma=1.571008 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8977 mas, bmaj=2.224 mas, bpa=-80.13 degrees ! Estimated noise=1.1203 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0209549 Jy ! Component: 100 - total flux cleaned = -0.029716 Jy ! Component: 150 - total flux cleaned = -0.0314081 Jy ! Component: 200 - total flux cleaned = -0.0320871 Jy ! Total flux subtracted in 200 components = -0.0320871 Jy ! Clean residual min=-0.011824 max=0.007784 Jy/beam ! Clean residual mean=0.000006 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 0.82682 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 80 components and 0.82682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144624Jy sigma=1.516528 ! Fit after self-cal, rms=0.143857Jy sigma=1.514340 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143857Jy sigma=1.514340 ! Fit after self-cal, rms=0.111207Jy sigma=1.195074 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000612211 Jy ! Component: 100 - total flux cleaned = 0.000819487 Jy ! Component: 150 - total flux cleaned = 0.000990328 Jy ! Component: 200 - total flux cleaned = 0.000987291 Jy ! Total flux subtracted in 200 components = 0.000987291 Jy ! Clean residual min=-0.011871 max=0.007649 Jy/beam ! Clean residual mean=0.000012 rms=0.002245 Jy/beam ! Combined flux in latest and established models = 0.827807 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 96 components and 0.827807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110272Jy sigma=1.182615 ! Fit after self-cal, rms=0.105357Jy sigma=1.152110 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8977 x 2.224 at -80.13 degrees (North through East) ! Clean map min=-0.018481 max=0.56264 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105357Jy sigma=1.152110 ! Fit after self-cal, rms=0.103511Jy sigma=1.081608 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103511Jy sigma=1.081608 ! Fit after self-cal, rms=0.102797Jy sigma=1.077844 ! Inverting map and beam ! Estimated beam: bmin=0.8939 mas, bmaj=2.218 mas, bpa=-80.41 degrees ! Estimated noise=1.12101 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00495663 Jy ! Component: 100 - total flux cleaned = -0.00666569 Jy ! Component: 150 - total flux cleaned = -0.00684983 Jy ! Component: 200 - total flux cleaned = -0.00685449 Jy ! Total flux subtracted in 200 components = -0.0068545 Jy ! Clean residual min=-0.008848 max=0.007222 Jy/beam ! Clean residual mean=-0.000028 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.820953 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 107 components and 0.820953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102069Jy sigma=1.059547 ! Fit after self-cal, rms=0.101825Jy sigma=1.057823 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101825Jy sigma=1.057823 ! Fit after self-cal, rms=0.099732Jy sigma=1.030499 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099732Jy sigma=1.030499 ! Fit after self-cal, rms=0.099707Jy sigma=1.030363 ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=2.211 mas, bpa=-80.47 degrees ! Estimated noise=1.12116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00386762 Jy ! Component: 100 - total flux cleaned = -0.00423146 Jy ! Component: 150 - total flux cleaned = -0.00391417 Jy ! Component: 200 - total flux cleaned = -0.00391389 Jy ! Total flux subtracted in 200 components = -0.00391389 Jy ! Clean residual min=-0.007903 max=0.006667 Jy/beam ! Clean residual mean=-0.000030 rms=0.001605 Jy/beam ! Combined flux in latest and established models = 0.817039 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 118 components and 0.817039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099298Jy sigma=1.019170 ! Fit after self-cal, rms=0.099224Jy sigma=1.018536 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=3.695 mas, bpa=-75.92 degrees ! Estimated noise=1.44335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000994232 Jy ! Component: 100 - total flux cleaned = -0.000710242 Jy ! Component: 150 - total flux cleaned = -0.000832411 Jy ! Component: 200 - total flux cleaned = -0.000934403 Jy ! Total flux subtracted in 200 components = -0.000934403 Jy ! Clean residual min=-0.007234 max=0.006337 Jy/beam ! Clean residual mean=-0.000069 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.816104 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 132 components and 0.816104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099280Jy sigma=1.018690 ! Fit after self-cal, rms=0.099247Jy sigma=1.017886 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7092 mas, bmaj=1.942 mas, bpa=-77.5 degrees ! Estimated noise=1.65615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.513186 Jy ! Component: 100 - total flux cleaned = 0.665897 Jy ! Component: 150 - total flux cleaned = 0.731567 Jy ! Component: 200 - total flux cleaned = 0.766653 Jy ! Total flux subtracted in 200 components = 0.766653 Jy ! Clean residual min=-0.010355 max=0.017718 Jy/beam ! Clean residual mean=-0.000111 rms=0.002740 Jy/beam ! Combined flux in latest and established models = 0.766654 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.766654 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=2.211 mas, bpa=-80.47 degrees ! Estimated noise=1.12116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293973 Jy ! Component: 100 - total flux cleaned = 0.039817 Jy ! Component: 150 - total flux cleaned = 0.0427234 Jy ! Component: 200 - total flux cleaned = 0.0440122 Jy ! Total flux subtracted in 200 components = 0.0440122 Jy ! Clean residual min=-0.007610 max=0.009337 Jy/beam ! Clean residual mean=-0.000064 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.810666 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 48 components and 0.810666 Jy ! Inverting map ! Added new window around map position (0.4, -2.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475108 Jy ! Component: 100 - total flux cleaned = 0.00427749 Jy ! Component: 150 - total flux cleaned = 0.00365844 Jy ! Component: 200 - total flux cleaned = 0.00330483 Jy ! Total flux subtracted in 200 components = 0.00330483 Jy ! Clean residual min=-0.006752 max=0.006195 Jy/beam ! Clean residual mean=-0.000045 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 0.813971 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 72 components and 0.813971 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.371 mas, bmaj=3.695 mas, bpa=-75.92 degrees ! Estimated noise=1.44335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136584 Jy ! Component: 100 - total flux cleaned = -0.000782512 Jy ! Component: 150 - total flux cleaned = -0.00027138 Jy ! Component: 200 - total flux cleaned = 0.000265687 Jy ! Total flux subtracted in 200 components = 0.000265687 Jy ! Clean residual min=-0.006070 max=0.005789 Jy/beam ! Clean residual mean=-0.000077 rms=0.001832 Jy/beam ! Combined flux in latest and established models = 0.814236 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.814237 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8945 mas, bmaj=2.211 mas, bpa=-80.47 degrees ! Estimated noise=1.12116 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0006459 Jy ! Component: 100 - total flux cleaned = -0.000783928 Jy ! Component: 150 - total flux cleaned = -0.000912228 Jy ! Component: 200 - total flux cleaned = -0.00103396 Jy ! Total flux subtracted in 200 components = -0.00103396 Jy ! Clean residual min=-0.006308 max=0.005835 Jy/beam ! Clean residual mean=-0.000039 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.813203 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 107 components and 0.813203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099018Jy sigma=1.005424 ! Fit after self-cal, rms=0.098867Jy sigma=1.003231 wmodel J1058+8114_X_2006_02_16_yyk\_map.mod ! Writing 107 model components to file: J1058+8114_X_2006_02_16_yyk_map.mod wobs J1058+8114_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1058+8114_X_2006_02_16_yyk_uvs.fits wwins J1058+8114_X_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J1058+8114_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124212 Jy ! Component: 100 - total flux cleaned = -0.00160187 Jy ! Component: 150 - total flux cleaned = -0.00236516 Jy ! Component: 200 - total flux cleaned = -0.00316563 Jy ! Component: 250 - total flux cleaned = -0.00385664 Jy ! Component: 300 - total flux cleaned = -0.00407816 Jy ! Component: 350 - total flux cleaned = -0.00429367 Jy ! Component: 400 - total flux cleaned = -0.00436372 Jy ! Component: 450 - total flux cleaned = -0.00443116 Jy ! Component: 500 - total flux cleaned = -0.00436458 Jy ! Component: 550 - total flux cleaned = -0.00449444 Jy ! Component: 600 - total flux cleaned = -0.00436858 Jy ! Component: 650 - total flux cleaned = -0.0043704 Jy ! Component: 700 - total flux cleaned = -0.00443081 Jy ! Component: 750 - total flux cleaned = -0.00454925 Jy ! Component: 800 - total flux cleaned = -0.00472316 Jy ! Component: 850 - total flux cleaned = -0.00483542 Jy ! Component: 900 - total flux cleaned = -0.00483508 Jy ! Component: 950 - total flux cleaned = -0.00488977 Jy ! Component: 1000 - total flux cleaned = -0.00494435 Jy ! Component: 1050 - total flux cleaned = -0.00504967 Jy ! Component: 1100 - total flux cleaned = -0.00504856 Jy ! Component: 1150 - total flux cleaned = -0.00520122 Jy ! Component: 1200 - total flux cleaned = -0.00520082 Jy ! Component: 1250 - total flux cleaned = -0.00525059 Jy ! Component: 1300 - total flux cleaned = -0.005396 Jy ! Component: 1350 - total flux cleaned = -0.00553948 Jy ! Component: 1400 - total flux cleaned = -0.00572839 Jy ! Component: 1450 - total flux cleaned = -0.00577442 Jy ! Component: 1500 - total flux cleaned = -0.00586602 Jy ! Component: 1550 - total flux cleaned = -0.00586594 Jy ! Component: 1600 - total flux cleaned = -0.00591146 Jy ! Component: 1650 - total flux cleaned = -0.0058227 Jy ! Component: 1700 - total flux cleaned = -0.00586704 Jy ! Component: 1750 - total flux cleaned = -0.00595314 Jy ! Component: 1800 - total flux cleaned = -0.00586736 Jy ! Component: 1850 - total flux cleaned = -0.00582493 Jy ! Component: 1900 - total flux cleaned = -0.00578294 Jy ! Component: 1950 - total flux cleaned = -0.0057825 Jy ! Component: 2000 - total flux cleaned = -0.00565912 Jy ! Total flux subtracted in 2048 components = -0.00561903 Jy ! Clean residual min=-0.002068 max=0.002184 Jy/beam ! Clean residual mean=-0.000021 rms=0.000775 Jy/beam ! Combined flux in latest and established models = 0.807583 Jy keep ! Adding 138 model components to the UV plane model. ! The established model now contains 245 components and 0.807584 Jy ![Exited script file: muppet] wmap "J1058+8114_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8945 x 2.211 at -80.47 degrees (North through East) ! Clean map min=-0.010927 max=0.57325 Jy/beam ! Writing clean map to FITS file: J1058+8114_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.573246 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00077037 device "J1058+8114_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1058+8114_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.403162 0.403162 0.806323 1.61265 3.22529 6.45059 12.9012 25.8023 51.6047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0023 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.573 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8945 x 2.211 at -80.47 degrees (North through East) ! Clean map min=-0.010927 max=0.57325 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058+8114_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1058+8114_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1058+8114_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 12:01:16 2006