! Started logfile: J1058+8114_X_2006_02_14_yyk_uvs.log on Wed Jul  5 12:00:29 2006
obs J1058+8114_X_2006_02_14_yyk_uva.fits
! Reading UV FITS file: J1058+8114_X_2006_02_14_yyk_uva.fits
! AN table 1: 482 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.650853 visibilities/baseline/integration-bin.
! Found source: J1058+8114
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 2302 lines of history.
! 
! Reading 56468 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
![@muppet J1058+8114_X_2006_02_14_yyk]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.04
float dynam
dynam = 6.0
float amp_soltime1
amp_soltime1 = 10
float amp_soltime2
amp_soltime2 = 1
float phase_soltime1
phase_soltime1=10
float phase_soltime2
phase_soltime2=0.5
float phase_soltime
phase_soltime=phase_soltime1
float ampcor_selflim
ampcor_selflim=1.20
float thresh
thresh = 0.10
float win_mult
win_mult = 1.8
float time_av
time_av = 30
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
uvav time_av, true
! Averaging into 30 second bins.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
phase_soltime=phase_soltime1
print "uvstat(rms)=",uvstat(rms),"Jy"
! uvstat(rms)= 0.718173 Jy 
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7203 mas, bmaj=1.909 mas, bpa=-78.01 degrees
! Estimated noise=1.76945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.582168 Jy
! Component: 100  -  total flux cleaned = 0.739198 Jy
! Total flux subtracted in 100 components = 0.739198 Jy
! Clean residual min=-0.026706 max=0.059430 Jy/beam
! Clean residual mean=-0.000232 rms=0.008475 Jy/beam
! Combined flux in latest and established models = 0.739198 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.739198 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.203370Jy  sigma=2.406801
! Fit after  self-cal, rms=0.187518Jy  sigma=2.210656
! Inverting map and beam 
! Estimated beam: bmin=0.7205 mas, bmaj=1.91 mas, bpa=-78.01 degrees
! Estimated noise=1.76873 mJy/beam.
! clean: niter=100  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0734088 Jy
! Component: 100  -  total flux cleaned = 0.102186 Jy
! Total flux subtracted in 100 components = 0.102186 Jy
! Clean residual min=-0.016223 max=0.023755 Jy/beam
! Clean residual mean=-0.000076 rms=0.004301 Jy/beam
! Combined flux in latest and established models = 0.841384 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 0.841384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167147Jy  sigma=1.719402
! Fit after  self-cal, rms=0.165902Jy  sigma=1.708085
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8701 mas, bmaj=2.183 mas, bpa=-78.38 degrees
! Estimated noise=1.18095 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.6, -0.8).
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210698 Jy
! Component: 100  -  total flux cleaned = 0.0247673 Jy
! Component: 150  -  total flux cleaned = 0.0260266 Jy
! Component: 200  -  total flux cleaned = 0.0264551 Jy
! Total flux subtracted in 200 components = 0.0264551 Jy
! Clean residual min=-0.013778 max=0.020365 Jy/beam
! Clean residual mean=0.000086 rms=0.003687 Jy/beam
! Combined flux in latest and established models = 0.867839 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 41 components and 0.867839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164321Jy  sigma=1.660000
! Fit after  self-cal, rms=0.162849Jy  sigma=1.653219
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8701 x 2.183 at -78.38 degrees (North through East)
! Clean map  min=-0.013481  max=0.66704 Jy/beam
if(peak(flux) < thresh*2)
  selflims ampcor_selflim
  end if
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.989195
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        0.99     
!   LA        1.01     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.03     SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00615
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        0.92     
!   LA        0.97     MK        0.96     NL        0.99     OV        0.99     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 1.00521
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.93     KP        0.86     
!   LA        0.98     MK        0.99     NL        0.97     OV        1.00     
!   PT        1.07     SC        1.04     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Amplitude normalization factor in sub-array 1: 0.987659
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        0.98     KP        0.88     
!   LA        0.97     MK        0.97     NL        0.99     OV        1.05     
!   PT        1.16     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.162849Jy  sigma=1.653219
! Fit after  self-cal, rms=0.151197Jy  sigma=1.467837
selfcal false, false, phase_soltime
! Performing phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151197Jy  sigma=1.467837
! Fit after  self-cal, rms=0.151138Jy  sigma=1.467680
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8737 mas, bmaj=2.177 mas, bpa=-78.58 degrees
! Estimated noise=1.1722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = -0.00448233 Jy
! Component: 100  -  total flux cleaned = -0.00586127 Jy
! Component: 150  -  total flux cleaned = -0.00677743 Jy
! Component: 200  -  total flux cleaned = -0.00709937 Jy
! Total flux subtracted in 200 components = -0.00709937 Jy
! Clean residual min=-0.005640 max=0.005748 Jy/beam
! Clean residual mean=0.000026 rms=0.001451 Jy/beam
! Combined flux in latest and established models = 0.86074 Jy
! Performing phase self-cal over 10 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 56 components and 0.86074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150782Jy  sigma=1.455746
! Fit after  self-cal, rms=0.150230Jy  sigma=1.454706
! Inverting map 
print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************"
! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** 
! 
phase_soltime=phase_soltime2
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150230Jy  sigma=1.454706
! Fit after  self-cal, rms=0.115428Jy  sigma=1.046551
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00234495 Jy
! Component: 100  -  total flux cleaned = 0.00206046 Jy
! Component: 150  -  total flux cleaned = 0.00193269 Jy
! Component: 200  -  total flux cleaned = 0.00181273 Jy
! Total flux subtracted in 200 components = 0.00181273 Jy
! Clean residual min=-0.005329 max=0.005462 Jy/beam
! Clean residual mean=0.000032 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.862552 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 70 components and 0.862552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115153Jy  sigma=1.040090
! Fit after  self-cal, rms=0.110790Jy  sigma=1.002757
! Inverting map 
print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***"
! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** 
! 
dynam = dynam - 0.25
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8737 x 2.177 at -78.58 degrees (North through East)
! Clean map  min=-0.004765  max=0.66651 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true, amp_soltime1
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true, amp_soltime2
  selfcal false, false, phase_soltime
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal false,false,phase_soltime
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  print "************** FINISHED AMPLITUDE SELF-CAL **************"
  end if
! Performing amp+phase self-cal over 10 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110790Jy  sigma=1.002757
! Fit after  self-cal, rms=0.109034Jy  sigma=0.959553
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109034Jy  sigma=0.959553
! Fit after  self-cal, rms=0.108657Jy  sigma=0.955216
! Inverting map and beam 
! Estimated beam: bmin=0.8697 mas, bmaj=2.184 mas, bpa=-78.64 degrees
! Estimated noise=1.16919 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136053 Jy
! Component: 100  -  total flux cleaned = 0.000792297 Jy
! Component: 150  -  total flux cleaned = 0.000305698 Jy
! Component: 200  -  total flux cleaned = -3.56945e-05 Jy
! Total flux subtracted in 200 components = -3.56945e-05 Jy
! Clean residual min=-0.004064 max=0.003596 Jy/beam
! Clean residual mean=-0.000005 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.862517 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 83 components and 0.862517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108481Jy  sigma=0.950625
! Fit after  self-cal, rms=0.108521Jy  sigma=0.949478
! Inverting map 
! Performing amp+phase self-cal over 1 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108521Jy  sigma=0.949478
! Fit after  self-cal, rms=0.108090Jy  sigma=0.929596
! Performing phase self-cal over 0.5 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108090Jy  sigma=0.929596
! Fit after  self-cal, rms=0.108164Jy  sigma=0.929444
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.188 mas, bpa=-78.81 degrees
! Estimated noise=1.16846 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000317231 Jy
! Component: 100  -  total flux cleaned = 0.000240663 Jy
! Component: 150  -  total flux cleaned = -2.99349e-05 Jy
! Component: 200  -  total flux cleaned = -0.000213409 Jy
! Total flux subtracted in 200 components = -0.000213409 Jy
! Clean residual min=-0.004044 max=0.003457 Jy/beam
! Clean residual mean=-0.000007 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.862303 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.862303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108065Jy  sigma=0.927115
! Fit after  self-cal, rms=0.108123Jy  sigma=0.926827
! Inverting map 
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.4
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=3.367 mas, bpa=-80.51 degrees
! Estimated noise=1.50872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal false,false,phase_soltime
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 1.09962e-05 Jy
! Component: 100  -  total flux cleaned = -2.89419e-05 Jy
! Component: 150  -  total flux cleaned = -6.20416e-05 Jy
! Component: 200  -  total flux cleaned = -8.41756e-05 Jy
! Total flux subtracted in 200 components = -8.41756e-05 Jy
! Clean residual min=-0.004270 max=0.003572 Jy/beam
! Clean residual mean=-0.000018 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.862219 Jy
! Performing phase self-cal over 0.5 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.862219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108060Jy  sigma=0.926364
! Fit after  self-cal, rms=0.108100Jy  sigma=0.926269
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
win_mult = win_mult / 1.4
print "************** FINISHED TAPERING SELF-CAL CLEAN **************"
! ************** FINISHED TAPERING SELF-CAL CLEAN ************** 
! 
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true,true,true
! clrmod: Cleared the established, tentative and continuum models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter, clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.721 mas, bmaj=1.912 mas, bpa=-78.13 degrees
! Estimated noise=1.74119 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.584384 Jy
! Component: 100  -  total flux cleaned = 0.752384 Jy
! Component: 150  -  total flux cleaned = 0.815709 Jy
! Component: 200  -  total flux cleaned = 0.842354 Jy
! Total flux subtracted in 200 components = 0.842354 Jy
! Clean residual min=-0.008184 max=0.008697 Jy/beam
! Clean residual mean=-0.000037 rms=0.001889 Jy/beam
! Combined flux in latest and established models = 0.842354 Jy
uvw 0,-2
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -2.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.842354 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.188 mas, bpa=-78.81 degrees
! Estimated noise=1.16846 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126006 Jy
! Component: 100  -  total flux cleaned = 0.0160199 Jy
! Component: 150  -  total flux cleaned = 0.0176119 Jy
! Component: 200  -  total flux cleaned = 0.0181696 Jy
! Total flux subtracted in 200 components = 0.0181696 Jy
! Clean residual min=-0.004695 max=0.003513 Jy/beam
! Clean residual mean=-0.000012 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 0.860524 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.860524 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=3.367 mas, bpa=-80.51 degrees
! Estimated noise=1.50872 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120712 Jy
! Component: 100  -  total flux cleaned = 0.00144057 Jy
! Component: 150  -  total flux cleaned = 0.00161148 Jy
! Component: 200  -  total flux cleaned = 0.00173927 Jy
! Total flux subtracted in 200 components = 0.00173927 Jy
! Clean residual min=-0.004345 max=0.003656 Jy/beam
! Clean residual mean=-0.000018 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.862263 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 49 components and 0.862263 Jy
! Inverting map 
uvtaper 0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8683 mas, bmaj=2.188 mas, bpa=-78.81 degrees
! Estimated noise=1.16846 mJy/beam.
! clean: niter=200  gain=0.04  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155677 Jy
! Component: 100  -  total flux cleaned = 0.0004037 Jy
! Component: 150  -  total flux cleaned = 0.000474802 Jy
! Component: 200  -  total flux cleaned = 0.000474845 Jy
! Total flux subtracted in 200 components = 0.000474845 Jy
! Clean residual min=-0.004104 max=0.003353 Jy/beam
! Clean residual mean=-0.000006 rms=0.000948 Jy/beam
! Combined flux in latest and established models = 0.862738 Jy
selfcal false, false, phase_soltime
! Performing phase self-cal over 0.5 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.862738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108072Jy  sigma=0.927067
! Fit after  self-cal, rms=0.108092Jy  sigma=0.926349
wmodel J1058+8114_X_2006_02_14_yyk\_map.mod
! Writing 60 model components to file: J1058+8114_X_2006_02_14_yyk_map.mod
wobs J1058+8114_X_2006_02_14_yyk\_uvs.fits
! Writing UV FITS file: J1058+8114_X_2006_02_14_yyk_uvs.fits
wwins J1058+8114_X_2006_02_14_yyk\_map.win
! wwins: Wrote 2 windows to J1058+8114_X_2006_02_14_yyk_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137681 Jy
! Component: 100  -  total flux cleaned = -0.00187974 Jy
! Component: 150  -  total flux cleaned = -0.00211681 Jy
! Component: 200  -  total flux cleaned = -0.00223052 Jy
! Component: 250  -  total flux cleaned = -0.00223094 Jy
! Component: 300  -  total flux cleaned = -0.00223114 Jy
! Component: 350  -  total flux cleaned = -0.00233456 Jy
! Component: 400  -  total flux cleaned = -0.00228383 Jy
! Component: 450  -  total flux cleaned = -0.00228333 Jy
! Component: 500  -  total flux cleaned = -0.00204401 Jy
! Component: 550  -  total flux cleaned = -0.00218442 Jy
! Component: 600  -  total flux cleaned = -0.00227598 Jy
! Component: 650  -  total flux cleaned = -0.00241026 Jy
! Component: 700  -  total flux cleaned = -0.00249623 Jy
! Component: 750  -  total flux cleaned = -0.00249524 Jy
! Component: 800  -  total flux cleaned = -0.00241107 Jy
! Component: 850  -  total flux cleaned = -0.00249433 Jy
! Component: 900  -  total flux cleaned = -0.00253526 Jy
! Component: 950  -  total flux cleaned = -0.00257541 Jy
! Component: 1000  -  total flux cleaned = -0.0026546 Jy
! Component: 1050  -  total flux cleaned = -0.00257857 Jy
! Component: 1100  -  total flux cleaned = -0.00280771 Jy
! Component: 1150  -  total flux cleaned = -0.00273246 Jy
! Component: 1200  -  total flux cleaned = -0.00273243 Jy
! Component: 1250  -  total flux cleaned = -0.00280581 Jy
! Component: 1300  -  total flux cleaned = -0.0028787 Jy
! Component: 1350  -  total flux cleaned = -0.00295023 Jy
! Component: 1400  -  total flux cleaned = -0.00298598 Jy
! Component: 1450  -  total flux cleaned = -0.00312525 Jy
! Component: 1500  -  total flux cleaned = -0.00312508 Jy
! Component: 1550  -  total flux cleaned = -0.00326111 Jy
! Component: 1600  -  total flux cleaned = -0.00319413 Jy
! Component: 1650  -  total flux cleaned = -0.0032271 Jy
! Component: 1700  -  total flux cleaned = -0.00319456 Jy
! Component: 1750  -  total flux cleaned = -0.00325992 Jy
! Component: 1800  -  total flux cleaned = -0.00338891 Jy
! Component: 1850  -  total flux cleaned = -0.00332502 Jy
! Component: 1900  -  total flux cleaned = -0.00348268 Jy
! Component: 1950  -  total flux cleaned = -0.00342015 Jy
! Component: 2000  -  total flux cleaned = -0.00345122 Jy
! Total flux subtracted in 2048 components = -0.00345107 Jy
! Clean residual min=-0.001875 max=0.001646 Jy/beam
! Clean residual mean=0.000003 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.859287 Jy
keep
! Adding 139 model components to the UV plane model.
! The established model now contains 199 components and 0.859287 Jy
![Exited script file: muppet]
wmap "J1058+8114_X_2006_02_14_yyk\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8683 x 2.188 at -78.81 degrees (North through East)
! Clean map  min=-0.0028658  max=0.66552 Jy/beam
! Writing clean map to FITS file: J1058+8114_X_2006_02_14_yyk_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.665519 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000566716 
device "J1058+8114_X_2006_02_14_yyk\_map.eps/VPS"
! Attempting to open device: 'J1058+8114_X_2006_02_14_yyk_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.255462 0.255462 0.510925 1.02185 2.0437 4.0874 8.1748 16.3496 32.6992 65.3984
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(peak_flux*1000)/1000
! peak= 0.665 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8683 x 2.188 at -78.81 degrees (North through East)
! Clean map  min=-0.0028658  max=0.66552 Jy/beam
mapcolor color, 0.9
! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5.
device "J1058+8114_X_2006_02_14_yyk\_map.gif/gif"
! Attempting to open device: 'J1058+8114_X_2006_02_14_yyk_map.gif/gif'
mapplot cln
quit
! Quitting program
! Log file J1058+8114_X_2006_02_14_yyk_uvs.log closed on Wed Jul  5 12:00:52 2006