! Started logfile: J1058+8114_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:00:06 2006 obs J1058+8114_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1058+8114_S_2006_02_23_yyk_uva.fits ! AN table 1: 435 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.839745 visibilities/baseline/integration-bin. ! Found source: J1058+8114 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 65752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1058+8114_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.652037 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=7.692 mas, bpa=-77.27 degrees ! Estimated noise=1.82504 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.521949 Jy ! Component: 100 - total flux cleaned = 0.616185 Jy ! Total flux subtracted in 100 components = 0.616185 Jy ! Clean residual min=-0.016695 max=0.026622 Jy/beam ! Clean residual mean=0.000002 rms=0.004570 Jy/beam ! Combined flux in latest and established models = 0.616185 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.616185 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.136832Jy sigma=1.668423 ! Fit after self-cal, rms=0.136577Jy sigma=1.664881 ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=7.692 mas, bpa=-77.27 degrees ! Estimated noise=1.82504 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.25 mas, bmaj=9.051 mas, bpa=-75.18 degrees ! Estimated noise=1.21404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324793 Jy ! Component: 100 - total flux cleaned = 0.0384979 Jy ! Component: 150 - total flux cleaned = 0.0379596 Jy ! Component: 200 - total flux cleaned = 0.0374085 Jy ! Total flux subtracted in 200 components = 0.0374085 Jy ! Clean residual min=-0.010710 max=0.012879 Jy/beam ! Clean residual mean=-0.000279 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 0.653594 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 18 components and 0.653594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127121Jy sigma=1.565494 ! Fit after self-cal, rms=0.127098Jy sigma=1.565394 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.25 x 9.051 at -75.18 degrees (North through East) ! Clean map min=-0.010441 max=0.61935 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.0131 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.96 KP 0.96 ! LA 1.22 MK 0.90 NL 0.93 OV 0.96 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.988596 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.99 KP 0.97 ! LA 1.18 MK 0.97 NL 0.93 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.987278 ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.03 HN 1.01 KP 1.00 ! LA 0.93 MK 1.11 NL 1.03 OV 1.04 ! PT 1.08 SC 1.04 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02516 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 0.95 KP 0.90 ! LA 0.81 MK 1.09 NL 0.97 OV 0.87 ! PT 0.96 SC 1.15 ! ! ! Fit before self-cal, rms=0.127098Jy sigma=1.565394 ! Fit after self-cal, rms=0.096309Jy sigma=1.200080 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096309Jy sigma=1.200080 ! Fit after self-cal, rms=0.096318Jy sigma=1.200027 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=9.086 mas, bpa=-75.41 degrees ! Estimated noise=1.21511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289812 Jy ! Component: 100 - total flux cleaned = 0.0037282 Jy ! Component: 150 - total flux cleaned = 0.00411895 Jy ! Component: 200 - total flux cleaned = 0.00445482 Jy ! Total flux subtracted in 200 components = 0.00445482 Jy ! Clean residual min=-0.005683 max=0.007059 Jy/beam ! Clean residual mean=0.000021 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.658049 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.658049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095915Jy sigma=1.196639 ! Fit after self-cal, rms=0.095891Jy sigma=1.196519 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095891Jy sigma=1.196519 ! Fit after self-cal, rms=0.092929Jy sigma=1.154868 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000527268 Jy ! Component: 100 - total flux cleaned = 0.000787052 Jy ! Component: 150 - total flux cleaned = 0.00101043 Jy ! Component: 200 - total flux cleaned = 0.00112615 Jy ! Total flux subtracted in 200 components = 0.00112615 Jy ! Clean residual min=-0.005700 max=0.006943 Jy/beam ! Clean residual mean=0.000020 rms=0.001611 Jy/beam ! Combined flux in latest and established models = 0.659175 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.659175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092877Jy sigma=1.154185 ! Fit after self-cal, rms=0.092571Jy sigma=1.151038 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 9.086 at -75.41 degrees (North through East) ! Clean map min=-0.0054911 max=0.62381 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092571Jy sigma=1.151038 ! Fit after self-cal, rms=0.078749Jy sigma=0.984660 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078749Jy sigma=0.984660 ! Fit after self-cal, rms=0.078713Jy sigma=0.984294 ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=9.096 mas, bpa=-75.32 degrees ! Estimated noise=1.21284 mJy/beam. ! Added new window around map position (27.5, 3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00428178 Jy ! Component: 100 - total flux cleaned = 0.00427569 Jy ! Component: 150 - total flux cleaned = 0.0043774 Jy ! Component: 200 - total flux cleaned = 0.00446268 Jy ! Total flux subtracted in 200 components = 0.00446268 Jy ! Clean residual min=-0.004137 max=0.003909 Jy/beam ! Clean residual mean=0.000002 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.663637 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 63 components and 0.663637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078412Jy sigma=0.978031 ! Fit after self-cal, rms=0.078390Jy sigma=0.977651 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078390Jy sigma=0.977651 ! Fit after self-cal, rms=0.072890Jy sigma=0.901363 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072890Jy sigma=0.901363 ! Fit after self-cal, rms=0.072889Jy sigma=0.901344 ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.095 mas, bpa=-75.32 degrees ! Estimated noise=1.21155 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491255 Jy ! Component: 100 - total flux cleaned = 0.000412148 Jy ! Component: 150 - total flux cleaned = 0.000410912 Jy ! Component: 200 - total flux cleaned = 0.000410388 Jy ! Total flux subtracted in 200 components = 0.000410388 Jy ! Clean residual min=-0.003811 max=0.003632 Jy/beam ! Clean residual mean=0.000010 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.664048 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 0.664048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072804Jy sigma=0.899516 ! Fit after self-cal, rms=0.072795Jy sigma=0.899438 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=12.74 mas, bpa=-75 degrees ! Estimated noise=1.50821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105119 Jy ! Component: 100 - total flux cleaned = 0.00114417 Jy ! Component: 150 - total flux cleaned = 0.0011798 Jy ! Component: 200 - total flux cleaned = 0.00124844 Jy ! Total flux subtracted in 200 components = 0.00124844 Jy ! Clean residual min=-0.003477 max=0.003520 Jy/beam ! Clean residual mean=0.000009 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.665296 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 107 components and 0.665296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072805Jy sigma=0.899314 ! Fit after self-cal, rms=0.072802Jy sigma=0.899256 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=7.756 mas, bpa=-77.47 degrees ! Estimated noise=1.82245 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.521575 Jy ! Component: 100 - total flux cleaned = 0.60885 Jy ! Component: 150 - total flux cleaned = 0.640024 Jy ! Component: 200 - total flux cleaned = 0.650499 Jy ! Total flux subtracted in 200 components = 0.650499 Jy ! Clean residual min=-0.007422 max=0.006384 Jy/beam ! Clean residual mean=-0.000004 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.650499 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.650499 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.095 mas, bpa=-75.32 degrees ! Estimated noise=1.21155 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091038 Jy ! Component: 100 - total flux cleaned = 0.0130678 Jy ! Component: 150 - total flux cleaned = 0.0139095 Jy ! Component: 200 - total flux cleaned = 0.0139084 Jy ! Total flux subtracted in 200 components = 0.0139084 Jy ! Clean residual min=-0.003958 max=0.003889 Jy/beam ! Clean residual mean=0.000007 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.664408 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 52 components and 0.664408 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.717 mas, bmaj=12.74 mas, bpa=-75 degrees ! Estimated noise=1.50821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112209 Jy ! Component: 100 - total flux cleaned = 0.00111734 Jy ! Component: 150 - total flux cleaned = 0.00111173 Jy ! Component: 200 - total flux cleaned = 0.00101519 Jy ! Total flux subtracted in 200 components = 0.00101519 Jy ! Clean residual min=-0.003487 max=0.003548 Jy/beam ! Clean residual mean=0.000009 rms=0.001171 Jy/beam ! Combined flux in latest and established models = 0.665423 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 68 components and 0.665423 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=9.095 mas, bpa=-75.32 degrees ! Estimated noise=1.21155 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000903184 Jy ! Component: 100 - total flux cleaned = -0.00082557 Jy ! Component: 150 - total flux cleaned = -0.000607135 Jy ! Component: 200 - total flux cleaned = -0.000406509 Jy ! Total flux subtracted in 200 components = -0.000406509 Jy ! Clean residual min=-0.003897 max=0.003308 Jy/beam ! Clean residual mean=0.000010 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.665016 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 88 components and 0.665016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072767Jy sigma=0.899570 ! Fit after self-cal, rms=0.072760Jy sigma=0.899507 wmodel J1058+8114_S_2006_02_23_yyk\_map.mod ! Writing 88 model components to file: J1058+8114_S_2006_02_23_yyk_map.mod wobs J1058+8114_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1058+8114_S_2006_02_23_yyk_uvs.fits wwins J1058+8114_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1058+8114_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984516 Jy ! Component: 100 - total flux cleaned = -0.000926981 Jy ! Component: 150 - total flux cleaned = -0.000699014 Jy ! Component: 200 - total flux cleaned = -0.000425435 Jy ! Component: 250 - total flux cleaned = -0.000372754 Jy ! Component: 300 - total flux cleaned = -0.000219006 Jy ! Component: 350 - total flux cleaned = -0.000220461 Jy ! Component: 400 - total flux cleaned = -0.00021939 Jy ! Component: 450 - total flux cleaned = -2.9044e-05 Jy ! Component: 500 - total flux cleaned = 6.32911e-05 Jy ! Component: 550 - total flux cleaned = 0.000199015 Jy ! Component: 600 - total flux cleaned = 0.000509445 Jy ! Component: 650 - total flux cleaned = 0.000900733 Jy ! Component: 700 - total flux cleaned = 0.00111486 Jy ! Component: 750 - total flux cleaned = 0.00149288 Jy ! Component: 800 - total flux cleaned = 0.00169925 Jy ! Component: 850 - total flux cleaned = 0.00198364 Jy ! Component: 900 - total flux cleaned = 0.00210364 Jy ! Component: 950 - total flux cleaned = 0.00230093 Jy ! Component: 1000 - total flux cleaned = 0.00253382 Jy ! Component: 1050 - total flux cleaned = 0.0027246 Jy ! Component: 1100 - total flux cleaned = 0.0029124 Jy ! Component: 1150 - total flux cleaned = 0.00309683 Jy ! Component: 1200 - total flux cleaned = 0.00324186 Jy ! Component: 1250 - total flux cleaned = 0.00338512 Jy ! Component: 1300 - total flux cleaned = 0.00356111 Jy ! Component: 1350 - total flux cleaned = 0.00363028 Jy ! Component: 1400 - total flux cleaned = 0.0036648 Jy ! Component: 1450 - total flux cleaned = 0.0038011 Jy ! Component: 1500 - total flux cleaned = 0.00393477 Jy ! Component: 1550 - total flux cleaned = 0.00396757 Jy ! Component: 1600 - total flux cleaned = 0.00403335 Jy ! Component: 1650 - total flux cleaned = 0.00413041 Jy ! Component: 1700 - total flux cleaned = 0.00416246 Jy ! Component: 1750 - total flux cleaned = 0.00422545 Jy ! Component: 1800 - total flux cleaned = 0.00428781 Jy ! Component: 1850 - total flux cleaned = 0.00431841 Jy ! Component: 1900 - total flux cleaned = 0.00425724 Jy ! Component: 1950 - total flux cleaned = 0.00431787 Jy ! Component: 2000 - total flux cleaned = 0.00428736 Jy ! Total flux subtracted in 2048 components = 0.00425772 Jy ! Clean residual min=-0.001955 max=0.002451 Jy/beam ! Clean residual mean=-0.000002 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.669274 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 217 components and 0.669274 Jy ![Exited script file: muppet] wmap "J1058+8114_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 9.095 at -75.32 degrees (North through East) ! Clean map min=-0.0032952 max=0.62308 Jy/beam ! Writing clean map to FITS file: J1058+8114_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.623077 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000614147 device "J1058+8114_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1058+8114_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.2957 0.2957 0.591401 1.1828 2.3656 4.73121 9.46241 18.9248 37.8497 75.6993 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.623 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 9.095 at -75.32 degrees (North through East) ! Clean map min=-0.0032952 max=0.62308 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1058+8114_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1058+8114_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1058+8114_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:00:28 2006