! Started logfile: J1054+8629_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:58:03 2006 obs J1054+8629_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1054+8629_S_2006_02_16_yyk_uva.fits ! AN table 1: 878 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994153 visibilities/baseline/integration-bin. ! Found source: J1054+8629 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 157116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1054+8629_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.170348 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.285 mas, bmaj=10.71 mas, bpa=10.49 degrees ! Estimated noise=1.36398 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.107133 Jy ! Component: 100 - total flux cleaned = 0.144225 Jy ! Total flux subtracted in 100 components = 0.144225 Jy ! Clean residual min=-0.008451 max=0.011706 Jy/beam ! Clean residual mean=0.000036 rms=0.002864 Jy/beam ! Combined flux in latest and established models = 0.144225 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.144225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100484Jy sigma=1.248189 ! Fit after self-cal, rms=0.100309Jy sigma=1.244639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=11.05 mas, bpa=9.978 degrees ! Estimated noise=0.713624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212462 Jy ! Component: 100 - total flux cleaned = 0.0304153 Jy ! Component: 150 - total flux cleaned = 0.0353754 Jy ! Component: 200 - total flux cleaned = 0.0382689 Jy ! Total flux subtracted in 200 components = 0.0382689 Jy ! Clean residual min=-0.005159 max=0.009434 Jy/beam ! Clean residual mean=-0.000047 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.182494 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 53 components and 0.182494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096754Jy sigma=1.164954 ! Fit after self-cal, rms=0.096641Jy sigma=1.164046 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 11.05 at 9.978 degrees (North through East) ! Clean map min=-0.0048779 max=0.12529 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02486 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 0.92 KP 0.90 ! LA 1.16 MK 0.86 NL 1.16 OV 0.95 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.096641Jy sigma=1.164046 ! Fit after self-cal, rms=0.096064Jy sigma=1.152805 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096064Jy sigma=1.152805 ! Fit after self-cal, rms=0.096044Jy sigma=1.152875 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.147 mas, bmaj=10.94 mas, bpa=10.2 degrees ! Estimated noise=0.712291 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337566 Jy ! Component: 100 - total flux cleaned = 0.00514176 Jy ! Component: 150 - total flux cleaned = 0.00557711 Jy ! Component: 200 - total flux cleaned = 0.00572743 Jy ! Total flux subtracted in 200 components = 0.00572743 Jy ! Clean residual min=-0.004278 max=0.008062 Jy/beam ! Clean residual mean=0.000000 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.188221 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 0.188221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095868Jy sigma=1.150276 ! Fit after self-cal, rms=0.095836Jy sigma=1.150456 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095836Jy sigma=1.150456 ! Fit after self-cal, rms=0.089577Jy sigma=1.055589 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, 3.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977074 Jy ! Component: 100 - total flux cleaned = 0.0136458 Jy ! Component: 150 - total flux cleaned = 0.0138878 Jy ! Component: 200 - total flux cleaned = 0.0139856 Jy ! Total flux subtracted in 200 components = 0.0139856 Jy ! Clean residual min=-0.003706 max=0.004895 Jy/beam ! Clean residual mean=-0.000000 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.202207 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 106 components and 0.202207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088745Jy sigma=1.034419 ! Fit after self-cal, rms=0.087977Jy sigma=1.028064 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.147 x 10.94 at 10.2 degrees (North through East) ! Clean map min=-0.0035531 max=0.12443 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087977Jy sigma=1.028064 ! Fit after self-cal, rms=0.088153Jy sigma=1.005251 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088153Jy sigma=1.005251 ! Fit after self-cal, rms=0.088028Jy sigma=1.004062 ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=10.97 mas, bpa=10.09 degrees ! Estimated noise=0.728033 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490325 Jy ! Component: 100 - total flux cleaned = 0.00643224 Jy ! Component: 150 - total flux cleaned = 0.00738078 Jy ! Component: 200 - total flux cleaned = 0.00781174 Jy ! Total flux subtracted in 200 components = 0.00781174 Jy ! Clean residual min=-0.003027 max=0.003581 Jy/beam ! Clean residual mean=0.000023 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.210019 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 137 components and 0.210019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087719Jy sigma=0.998443 ! Fit after self-cal, rms=0.087683Jy sigma=0.998039 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087683Jy sigma=0.998039 ! Fit after self-cal, rms=0.087025Jy sigma=0.978057 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087025Jy sigma=0.978057 ! Fit after self-cal, rms=0.087051Jy sigma=0.977833 ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=10.94 mas, bpa=10.12 degrees ! Estimated noise=0.731105 mJy/beam. ! Added new window around map position (-17, 43.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421429 Jy ! Component: 100 - total flux cleaned = 0.00657992 Jy ! Component: 150 - total flux cleaned = 0.00793894 Jy ! Component: 200 - total flux cleaned = 0.00835552 Jy ! Total flux subtracted in 200 components = 0.00835552 Jy ! Clean residual min=-0.002592 max=0.002136 Jy/beam ! Clean residual mean=0.000037 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.218374 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 177 components and 0.218374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086835Jy sigma=0.973109 ! Fit after self-cal, rms=0.086853Jy sigma=0.972731 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=12.46 mas, bpa=12.13 degrees ! Estimated noise=0.932252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225766 Jy ! Component: 100 - total flux cleaned = 0.0030307 Jy ! Component: 150 - total flux cleaned = 0.00317044 Jy ! Component: 200 - total flux cleaned = 0.00329142 Jy ! Total flux subtracted in 200 components = 0.00329142 Jy ! Clean residual min=-0.003111 max=0.002361 Jy/beam ! Clean residual mean=0.000084 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 0.221666 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 211 components and 0.221666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086833Jy sigma=0.972027 ! Fit after self-cal, rms=0.086842Jy sigma=0.971931 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.272 mas, bmaj=10.7 mas, bpa=10.52 degrees ! Estimated noise=1.36166 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110663 Jy ! Component: 100 - total flux cleaned = 0.150331 Jy ! Component: 150 - total flux cleaned = 0.170362 Jy ! Component: 200 - total flux cleaned = 0.183189 Jy ! Total flux subtracted in 200 components = 0.183189 Jy ! Clean residual min=-0.006412 max=0.006299 Jy/beam ! Clean residual mean=0.000037 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.183189 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.183189 Jy ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=10.94 mas, bpa=10.12 degrees ! Estimated noise=0.731105 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114915 Jy ! Component: 100 - total flux cleaned = 0.0182081 Jy ! Component: 150 - total flux cleaned = 0.0230547 Jy ! Component: 200 - total flux cleaned = 0.0265476 Jy ! Total flux subtracted in 200 components = 0.0265476 Jy ! Clean residual min=-0.002851 max=0.002652 Jy/beam ! Clean residual mean=0.000036 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.209736 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 113 components and 0.209736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.396 mas, bmaj=12.46 mas, bpa=12.13 degrees ! Estimated noise=0.932252 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502877 Jy ! Component: 100 - total flux cleaned = 0.00810066 Jy ! Component: 150 - total flux cleaned = 0.0102822 Jy ! Component: 200 - total flux cleaned = 0.0114805 Jy ! Total flux subtracted in 200 components = 0.0114805 Jy ! Clean residual min=-0.003018 max=0.002506 Jy/beam ! Clean residual mean=0.000084 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.221217 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 157 components and 0.221217 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=10.94 mas, bpa=10.12 degrees ! Estimated noise=0.731105 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000376359 Jy ! Component: 100 - total flux cleaned = -0.000378963 Jy ! Component: 150 - total flux cleaned = -0.00013031 Jy ! Component: 200 - total flux cleaned = 7.98821e-05 Jy ! Total flux subtracted in 200 components = 7.98821e-05 Jy ! Clean residual min=-0.002527 max=0.002506 Jy/beam ! Clean residual mean=0.000038 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.221297 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 0.221297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086815Jy sigma=0.972013 ! Fit after self-cal, rms=0.086833Jy sigma=0.971770 wmodel J1054+8629_S_2006_02_16_yyk\_map.mod ! Writing 184 model components to file: J1054+8629_S_2006_02_16_yyk_map.mod wobs J1054+8629_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1054+8629_S_2006_02_16_yyk_uvs.fits wwins J1054+8629_S_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J1054+8629_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.48995e-05 Jy ! Component: 100 - total flux cleaned = -0.000178384 Jy ! Component: 150 - total flux cleaned = -0.000459085 Jy ! Component: 200 - total flux cleaned = -0.000557066 Jy ! Component: 250 - total flux cleaned = -0.000651332 Jy ! Component: 300 - total flux cleaned = -0.00083201 Jy ! Component: 350 - total flux cleaned = -0.0010051 Jy ! Component: 400 - total flux cleaned = -0.00125622 Jy ! Component: 450 - total flux cleaned = -0.00144489 Jy ! Component: 500 - total flux cleaned = -0.0016283 Jy ! Component: 550 - total flux cleaned = -0.0018062 Jy ! Component: 600 - total flux cleaned = -0.00192972 Jy ! Component: 650 - total flux cleaned = -0.00204964 Jy ! Component: 700 - total flux cleaned = -0.00211957 Jy ! Component: 750 - total flux cleaned = -0.00216508 Jy ! Component: 800 - total flux cleaned = -0.0021656 Jy ! Component: 850 - total flux cleaned = -0.00225382 Jy ! Component: 900 - total flux cleaned = -0.00236118 Jy ! Component: 950 - total flux cleaned = -0.00236116 Jy ! Component: 1000 - total flux cleaned = -0.00236143 Jy ! Component: 1050 - total flux cleaned = -0.00240255 Jy ! Component: 1100 - total flux cleaned = -0.00242276 Jy ! Component: 1150 - total flux cleaned = -0.00238311 Jy ! Component: 1200 - total flux cleaned = -0.00234384 Jy ! Component: 1250 - total flux cleaned = -0.00234378 Jy ! Component: 1300 - total flux cleaned = -0.00224792 Jy ! Component: 1350 - total flux cleaned = -0.00221033 Jy ! Component: 1400 - total flux cleaned = -0.00213597 Jy ! Component: 1450 - total flux cleaned = -0.00209902 Jy ! Component: 1500 - total flux cleaned = -0.00208101 Jy ! Component: 1550 - total flux cleaned = -0.00208062 Jy ! Component: 1600 - total flux cleaned = -0.00197392 Jy ! Component: 1650 - total flux cleaned = -0.00195643 Jy ! Component: 1700 - total flux cleaned = -0.00197367 Jy ! Component: 1750 - total flux cleaned = -0.00193933 Jy ! Component: 1800 - total flux cleaned = -0.00192208 Jy ! Component: 1850 - total flux cleaned = -0.00190525 Jy ! Component: 1900 - total flux cleaned = -0.00190508 Jy ! Component: 1950 - total flux cleaned = -0.00188866 Jy ! Component: 2000 - total flux cleaned = -0.00195366 Jy ! Total flux subtracted in 2048 components = -0.00190495 Jy ! Clean residual min=-0.001006 max=0.000865 Jy/beam ! Clean residual mean=0.000021 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.219392 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 326 components and 0.219392 Jy ![Exited script file: muppet] wmap "J1054+8629_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 10.94 at 10.12 degrees (North through East) ! Clean map min=-0.0022651 max=0.12723 Jy/beam ! Writing clean map to FITS file: J1054+8629_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.12723 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320175 device "J1054+8629_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1054+8629_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.75495 0.75495 1.5099 3.0198 6.0396 12.0792 24.1584 48.3168 96.6336 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.096 x 10.94 at 10.12 degrees (North through East) ! Clean map min=-0.0022651 max=0.12723 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1054+8629_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1054+8629_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1054+8629_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:58:28 2006