! Started logfile: J1010+8250_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:55:19 2006 obs J1010+8250_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J1010+8250_S_2006_02_16_yyk_uva.fits ! AN table 1: 872 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.994725 visibilities/baseline/integration-bin. ! Found source: J1010+8250 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2427 lines of history. ! ! Reading 156132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1010+8250_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.259796 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=10.61 mas, bpa=6.718 degrees ! Estimated noise=1.26842 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.188328 Jy ! Component: 100 - total flux cleaned = 0.246537 Jy ! Total flux subtracted in 100 components = 0.246537 Jy ! Clean residual min=-0.016546 max=0.034898 Jy/beam ! Clean residual mean=0.000185 rms=0.006096 Jy/beam ! Combined flux in latest and established models = 0.246537 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.246537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106922Jy sigma=1.857222 ! Fit after self-cal, rms=0.106634Jy sigma=1.851546 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=11.03 mas, bpa=6.578 degrees ! Estimated noise=0.714667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7.5, 2.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550163 Jy ! Component: 100 - total flux cleaned = 0.0757558 Jy ! Component: 150 - total flux cleaned = 0.0832854 Jy ! Component: 200 - total flux cleaned = 0.0879713 Jy ! Total flux subtracted in 200 components = 0.0879713 Jy ! Clean residual min=-0.011765 max=0.022032 Jy/beam ! Clean residual mean=0.000042 rms=0.004112 Jy/beam ! Combined flux in latest and established models = 0.334509 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 58 components and 0.334508 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084773Jy sigma=1.407707 ! Fit after self-cal, rms=0.083058Jy sigma=1.366900 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.139 x 11.03 at 6.578 degrees (North through East) ! Clean map min=-0.01103 max=0.2187 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01492 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.92 HN 0.97 KP 0.96 ! LA 1.17 MK 0.89 NL 1.10 OV 0.93 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.982383 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 HN 1.03 KP 0.99 ! LA 1.12 MK 0.94 NL 1.25 OV 0.93 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.979119 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00 HN 1.03 KP 0.98 ! LA 0.90 MK 1.06 NL 1.32 OV 0.99 ! PT 1.01 SC 1.06 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02563 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 0.89 ! LA 0.77 MK 1.04 NL 1.27 OV 0.83 ! PT 0.91 SC 1.08 ! ! ! Fit before self-cal, rms=0.083058Jy sigma=1.366900 ! Fit after self-cal, rms=0.072831Jy sigma=1.216904 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072831Jy sigma=1.216904 ! Fit after self-cal, rms=0.072855Jy sigma=1.216797 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=10.86 mas, bpa=7.116 degrees ! Estimated noise=0.705861 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0080643 Jy ! Component: 100 - total flux cleaned = 0.00830534 Jy ! Component: 150 - total flux cleaned = 0.00867003 Jy ! Component: 200 - total flux cleaned = 0.00925053 Jy ! Total flux subtracted in 200 components = 0.00925053 Jy ! Clean residual min=-0.005930 max=0.009668 Jy/beam ! Clean residual mean=0.000068 rms=0.002138 Jy/beam ! Combined flux in latest and established models = 0.343759 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 93 components and 0.343759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071885Jy sigma=1.190488 ! Fit after self-cal, rms=0.071868Jy sigma=1.189837 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071868Jy sigma=1.189837 ! Fit after self-cal, rms=0.063843Jy sigma=1.053497 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269222 Jy ! Component: 100 - total flux cleaned = 0.00333142 Jy ! Component: 150 - total flux cleaned = 0.00366237 Jy ! Component: 200 - total flux cleaned = 0.00386167 Jy ! Total flux subtracted in 200 components = 0.00386167 Jy ! Clean residual min=-0.005758 max=0.009301 Jy/beam ! Clean residual mean=0.000060 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 0.347621 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 129 components and 0.347621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063477Jy sigma=1.046410 ! Fit after self-cal, rms=0.063311Jy sigma=1.043258 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 10.86 at 7.116 degrees (North through East) ! Clean map min=-0.0057981 max=0.21937 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063311Jy sigma=1.043258 ! Fit after self-cal, rms=0.061747Jy sigma=1.022579 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061747Jy sigma=1.022579 ! Fit after self-cal, rms=0.061744Jy sigma=1.022322 ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=10.84 mas, bpa=7.032 degrees ! Estimated noise=0.702148 mJy/beam. ! Added new window around map position (17, -3). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0109266 Jy ! Component: 100 - total flux cleaned = 0.0162771 Jy ! Component: 150 - total flux cleaned = 0.0190194 Jy ! Component: 200 - total flux cleaned = 0.0204592 Jy ! Total flux subtracted in 200 components = 0.0204592 Jy ! Clean residual min=-0.003909 max=0.004150 Jy/beam ! Clean residual mean=-0.000001 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.36808 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 180 components and 0.36808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060538Jy sigma=0.991824 ! Fit after self-cal, rms=0.060496Jy sigma=0.991073 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060496Jy sigma=0.991073 ! Fit after self-cal, rms=0.059249Jy sigma=0.948408 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059249Jy sigma=0.948408 ! Fit after self-cal, rms=0.059246Jy sigma=0.948357 ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=10.82 mas, bpa=7.056 degrees ! Estimated noise=0.700017 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00221463 Jy ! Component: 100 - total flux cleaned = 0.002901 Jy ! Component: 150 - total flux cleaned = 0.0034871 Jy ! Component: 200 - total flux cleaned = 0.00374317 Jy ! Total flux subtracted in 200 components = 0.00374317 Jy ! Clean residual min=-0.003696 max=0.004135 Jy/beam ! Clean residual mean=0.000006 rms=0.001030 Jy/beam ! Combined flux in latest and established models = 0.371823 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 224 components and 0.371823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059091Jy sigma=0.944803 ! Fit after self-cal, rms=0.059084Jy sigma=0.944545 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.687 mas, bmaj=12.42 mas, bpa=11.17 degrees ! Estimated noise=0.887111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00378813 Jy ! Component: 100 - total flux cleaned = 0.00503374 Jy ! Component: 150 - total flux cleaned = 0.00527427 Jy ! Component: 200 - total flux cleaned = 0.0053822 Jy ! Total flux subtracted in 200 components = 0.0053822 Jy ! Clean residual min=-0.004716 max=0.004284 Jy/beam ! Clean residual mean=-0.000008 rms=0.001476 Jy/beam ! Combined flux in latest and established models = 0.377205 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 247 components and 0.377205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059094Jy sigma=0.944397 ! Fit after self-cal, rms=0.059090Jy sigma=0.944212 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=10.46 mas, bpa=6.734 degrees ! Estimated noise=1.24048 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.186088 Jy ! Component: 100 - total flux cleaned = 0.244907 Jy ! Component: 150 - total flux cleaned = 0.27691 Jy ! Component: 200 - total flux cleaned = 0.296654 Jy ! Total flux subtracted in 200 components = 0.296654 Jy ! Clean residual min=-0.007554 max=0.007863 Jy/beam ! Clean residual mean=0.000087 rms=0.002363 Jy/beam ! Combined flux in latest and established models = 0.296654 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.296654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=10.82 mas, bpa=7.056 degrees ! Estimated noise=0.700017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0234913 Jy ! Component: 100 - total flux cleaned = 0.0383808 Jy ! Component: 150 - total flux cleaned = 0.0491605 Jy ! Component: 200 - total flux cleaned = 0.0573156 Jy ! Total flux subtracted in 200 components = 0.0573156 Jy ! Clean residual min=-0.004939 max=0.005672 Jy/beam ! Clean residual mean=0.000038 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 0.353969 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 113 components and 0.353969 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.687 mas, bmaj=12.42 mas, bpa=11.17 degrees ! Estimated noise=0.887111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105853 Jy ! Component: 100 - total flux cleaned = 0.0144573 Jy ! Component: 150 - total flux cleaned = 0.0167189 Jy ! Component: 200 - total flux cleaned = 0.0185066 Jy ! Total flux subtracted in 200 components = 0.0185066 Jy ! Clean residual min=-0.006077 max=0.005288 Jy/beam ! Clean residual mean=0.000012 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 0.372476 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 165 components and 0.372476 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.168 mas, bmaj=10.82 mas, bpa=7.056 degrees ! Estimated noise=0.700017 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000378278 Jy ! Component: 100 - total flux cleaned = 0.000435269 Jy ! Component: 150 - total flux cleaned = 0.00112396 Jy ! Component: 200 - total flux cleaned = 0.00171013 Jy ! Total flux subtracted in 200 components = 0.00171013 Jy ! Clean residual min=-0.003326 max=0.003810 Jy/beam ! Clean residual mean=0.000005 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.374186 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 201 components and 0.374186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059061Jy sigma=0.944211 ! Fit after self-cal, rms=0.059043Jy sigma=0.943595 wmodel J1010+8250_S_2006_02_16_yyk\_map.mod ! Writing 201 model components to file: J1010+8250_S_2006_02_16_yyk_map.mod wobs J1010+8250_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J1010+8250_S_2006_02_16_yyk_uvs.fits wwins J1010+8250_S_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J1010+8250_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000473008 Jy ! Component: 100 - total flux cleaned = 0.000243165 Jy ! Component: 150 - total flux cleaned = -7.04344e-05 Jy ! Component: 200 - total flux cleaned = -0.000121008 Jy ! Component: 250 - total flux cleaned = -3.31151e-05 Jy ! Component: 300 - total flux cleaned = 9.1537e-05 Jy ! Component: 350 - total flux cleaned = 9.32691e-05 Jy ! Component: 400 - total flux cleaned = -0.000165029 Jy ! Component: 450 - total flux cleaned = -0.000413344 Jy ! Component: 500 - total flux cleaned = -0.000583692 Jy ! Component: 550 - total flux cleaned = -0.000715241 Jy ! Component: 600 - total flux cleaned = -0.000715977 Jy ! Component: 650 - total flux cleaned = -0.000624224 Jy ! Component: 700 - total flux cleaned = -0.000504931 Jy ! Component: 750 - total flux cleaned = -0.000389124 Jy ! Component: 800 - total flux cleaned = -0.000276721 Jy ! Component: 850 - total flux cleaned = -0.000249236 Jy ! Component: 900 - total flux cleaned = -0.000196011 Jy ! Component: 950 - total flux cleaned = -0.000143596 Jy ! Component: 1000 - total flux cleaned = -4.10748e-05 Jy ! Component: 1050 - total flux cleaned = -1.63719e-05 Jy ! Component: 1100 - total flux cleaned = 3.32805e-05 Jy ! Component: 1150 - total flux cleaned = 0.000106652 Jy ! Component: 1200 - total flux cleaned = 0.00020213 Jy ! Component: 1250 - total flux cleaned = 0.000225361 Jy ! Component: 1300 - total flux cleaned = 0.000202598 Jy ! Component: 1350 - total flux cleaned = 0.000270117 Jy ! Component: 1400 - total flux cleaned = 0.000292006 Jy ! Component: 1450 - total flux cleaned = 0.000269915 Jy ! Component: 1500 - total flux cleaned = 0.00027037 Jy ! Component: 1550 - total flux cleaned = 0.000313192 Jy ! Component: 1600 - total flux cleaned = 0.000313025 Jy ! Component: 1650 - total flux cleaned = 0.000333471 Jy ! Component: 1700 - total flux cleaned = 0.000333423 Jy ! Component: 1750 - total flux cleaned = 0.000333358 Jy ! Component: 1800 - total flux cleaned = 0.000373121 Jy ! Component: 1850 - total flux cleaned = 0.000412274 Jy ! Component: 1900 - total flux cleaned = 0.000412244 Jy ! Component: 1950 - total flux cleaned = 0.000450755 Jy ! Component: 2000 - total flux cleaned = 0.000507603 Jy ! Total flux subtracted in 2048 components = 0.00058225 Jy ! Clean residual min=-0.001488 max=0.001391 Jy/beam ! Clean residual mean=0.000000 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.374768 Jy keep ! Adding 177 model components to the UV plane model. ! The established model now contains 378 components and 0.374768 Jy ![Exited script file: muppet] wmap "J1010+8250_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 10.82 at 7.056 degrees (North through East) ! Clean map min=-0.0031241 max=0.2154 Jy/beam ! Writing clean map to FITS file: J1010+8250_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.215403 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000407767 device "J1010+8250_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J1010+8250_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.567912 0.567912 1.13582 2.27165 4.54329 9.08658 18.1732 36.3463 72.6927 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.168 x 10.82 at 7.056 degrees (North through East) ! Clean map min=-0.0031241 max=0.2154 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1010+8250_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J1010+8250_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1010+8250_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:55:44 2006