! Started logfile: J0919+7825_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:51:26 2006 obs J0919+7825_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0919+7825_S_2006_02_14_yyk_uva.fits ! AN table 1: 873 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.987425 visibilities/baseline/integration-bin. ! Found source: J0919+7825 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 155164 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0919+7825_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.350931 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=10.42 mas, bpa=13 degrees ! Estimated noise=1.2237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.289963 Jy ! Component: 100 - total flux cleaned = 0.330584 Jy ! Total flux subtracted in 100 components = 0.330584 Jy ! Clean residual min=-0.008325 max=0.010420 Jy/beam ! Clean residual mean=-0.000023 rms=0.002737 Jy/beam ! Combined flux in latest and established models = 0.330584 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.330584 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.077401Jy sigma=1.321582 ! Fit after self-cal, rms=0.077365Jy sigma=1.320273 ! Inverting map and beam ! Estimated beam: bmin=2.243 mas, bmaj=10.42 mas, bpa=13 degrees ! Estimated noise=1.2237 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.14 mas, bmaj=10.52 mas, bpa=11.99 degrees ! Estimated noise=0.686881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164347 Jy ! Component: 100 - total flux cleaned = 0.0232215 Jy ! Component: 150 - total flux cleaned = 0.0270073 Jy ! Component: 200 - total flux cleaned = 0.0285958 Jy ! Total flux subtracted in 200 components = 0.0285958 Jy ! Clean residual min=-0.005759 max=0.008416 Jy/beam ! Clean residual mean=-0.000113 rms=0.001818 Jy/beam ! Combined flux in latest and established models = 0.35918 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 40 components and 0.35918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073835Jy sigma=1.269477 ! Fit after self-cal, rms=0.073811Jy sigma=1.269028 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.14 x 10.52 at 11.99 degrees (North through East) ! Clean map min=-0.0056676 max=0.337 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01791 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.93 HN 0.97 KP 0.95 ! LA 1.21 MK 0.89 NL 0.94 OV 0.98 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990594 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 HN 1.01 KP 0.98 ! LA 1.16 MK 0.97 NL 0.96 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971992 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.04 KP 0.98 ! LA 0.94 MK 1.09 NL 1.05 OV 1.03 ! PT 1.09 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03865 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.96 KP 0.90 ! LA 0.80 MK 1.09 NL 0.97 OV 0.85 ! PT 0.94 SC 1.11 ! ! ! Fit before self-cal, rms=0.073811Jy sigma=1.269028 ! Fit after self-cal, rms=0.063682Jy sigma=1.108831 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063682Jy sigma=1.108831 ! Fit after self-cal, rms=0.063685Jy sigma=1.108815 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.184 mas, bmaj=10.48 mas, bpa=11.83 degrees ! Estimated noise=0.687087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323613 Jy ! Component: 100 - total flux cleaned = 0.00431996 Jy ! Component: 150 - total flux cleaned = 0.00476307 Jy ! Component: 200 - total flux cleaned = 0.00502766 Jy ! Total flux subtracted in 200 components = 0.00502766 Jy ! Clean residual min=-0.002854 max=0.003183 Jy/beam ! Clean residual mean=0.000000 rms=0.000839 Jy/beam ! Combined flux in latest and established models = 0.364207 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.364207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063512Jy sigma=1.106285 ! Fit after self-cal, rms=0.063507Jy sigma=1.106236 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063507Jy sigma=1.106236 ! Fit after self-cal, rms=0.058633Jy sigma=1.016998 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000723261 Jy ! Component: 100 - total flux cleaned = 0.000778461 Jy ! Component: 150 - total flux cleaned = 0.000800404 Jy ! Component: 200 - total flux cleaned = 0.000844068 Jy ! Total flux subtracted in 200 components = 0.000844068 Jy ! Clean residual min=-0.002814 max=0.003182 Jy/beam ! Clean residual mean=0.000001 rms=0.000817 Jy/beam ! Combined flux in latest and established models = 0.365051 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.365051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058571Jy sigma=1.016549 ! Fit after self-cal, rms=0.058432Jy sigma=1.014269 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.184 x 10.48 at 11.83 degrees (North through East) ! Clean map min=-0.0027482 max=0.33955 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058432Jy sigma=1.014269 ! Fit after self-cal, rms=0.055562Jy sigma=0.960354 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055562Jy sigma=0.960354 ! Fit after self-cal, rms=0.055549Jy sigma=0.960153 ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=10.45 mas, bpa=11.76 degrees ! Estimated noise=0.685737 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126528 Jy ! Component: 100 - total flux cleaned = 0.000206163 Jy ! Component: 150 - total flux cleaned = 0.000268816 Jy ! Component: 200 - total flux cleaned = 0.00032488 Jy ! Total flux subtracted in 200 components = 0.00032488 Jy ! Clean residual min=-0.002915 max=0.003047 Jy/beam ! Clean residual mean=0.000004 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.365376 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 75 components and 0.365376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055526Jy sigma=0.959780 ! Fit after self-cal, rms=0.055524Jy sigma=0.959757 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055524Jy sigma=0.959757 ! Fit after self-cal, rms=0.053810Jy sigma=0.926983 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053810Jy sigma=0.926983 ! Fit after self-cal, rms=0.053810Jy sigma=0.926968 ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=10.44 mas, bpa=11.71 degrees ! Estimated noise=0.685521 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125658 Jy ! Component: 100 - total flux cleaned = 0.000145183 Jy ! Component: 150 - total flux cleaned = 0.00020094 Jy ! Component: 200 - total flux cleaned = 0.000251627 Jy ! Total flux subtracted in 200 components = 0.000251627 Jy ! Clean residual min=-0.002825 max=0.002973 Jy/beam ! Clean residual mean=0.000005 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.365628 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 0.365628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053796Jy sigma=0.926726 ! Fit after self-cal, rms=0.053796Jy sigma=0.926723 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.291 mas, bmaj=11.56 mas, bpa=10.88 degrees ! Estimated noise=0.864457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588877 Jy ! Component: 100 - total flux cleaned = 0.000604889 Jy ! Component: 150 - total flux cleaned = 0.000644881 Jy ! Component: 200 - total flux cleaned = 0.000659097 Jy ! Total flux subtracted in 200 components = 0.000659097 Jy ! Clean residual min=-0.003156 max=0.003804 Jy/beam ! Clean residual mean=0.000011 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 0.366287 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 0.366287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053832Jy sigma=0.927151 ! Fit after self-cal, rms=0.053825Jy sigma=0.927009 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.266 mas, bmaj=10.36 mas, bpa=12.87 degrees ! Estimated noise=1.22175 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.290415 Jy ! Component: 100 - total flux cleaned = 0.330814 Jy ! Component: 150 - total flux cleaned = 0.343955 Jy ! Component: 200 - total flux cleaned = 0.351033 Jy ! Total flux subtracted in 200 components = 0.351033 Jy ! Clean residual min=-0.005024 max=0.004939 Jy/beam ! Clean residual mean=0.000001 rms=0.001260 Jy/beam ! Combined flux in latest and established models = 0.351034 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.351034 Jy ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=10.44 mas, bpa=11.71 degrees ! Estimated noise=0.685521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750477 Jy ! Component: 100 - total flux cleaned = 0.0113133 Jy ! Component: 150 - total flux cleaned = 0.0128573 Jy ! Component: 200 - total flux cleaned = 0.0138654 Jy ! Total flux subtracted in 200 components = 0.0138654 Jy ! Clean residual min=-0.002862 max=0.002466 Jy/beam ! Clean residual mean=0.000003 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.364899 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 76 components and 0.364899 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.291 mas, bmaj=11.56 mas, bpa=10.88 degrees ! Estimated noise=0.864457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205894 Jy ! Component: 100 - total flux cleaned = 0.00218463 Jy ! Component: 150 - total flux cleaned = 0.00229329 Jy ! Component: 200 - total flux cleaned = 0.00241706 Jy ! Total flux subtracted in 200 components = 0.00241706 Jy ! Clean residual min=-0.003076 max=0.003271 Jy/beam ! Clean residual mean=0.000006 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.367316 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 96 components and 0.367316 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.195 mas, bmaj=10.44 mas, bpa=11.71 degrees ! Estimated noise=0.685521 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381621 Jy ! Component: 100 - total flux cleaned = -0.00022541 Jy ! Component: 150 - total flux cleaned = -0.000108957 Jy ! Component: 200 - total flux cleaned = 1.34842e-05 Jy ! Total flux subtracted in 200 components = 1.34842e-05 Jy ! Clean residual min=-0.002516 max=0.002393 Jy/beam ! Clean residual mean=0.000002 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.367329 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.367329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053643Jy sigma=0.923295 ! Fit after self-cal, rms=0.053630Jy sigma=0.923013 wmodel J0919+7825_S_2006_02_14_yyk\_map.mod ! Writing 122 model components to file: J0919+7825_S_2006_02_14_yyk_map.mod wobs J0919+7825_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0919+7825_S_2006_02_14_yyk_uvs.fits wwins J0919+7825_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0919+7825_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383467 Jy ! Component: 100 - total flux cleaned = -0.000264307 Jy ! Component: 150 - total flux cleaned = -0.000408632 Jy ! Component: 200 - total flux cleaned = -0.000510504 Jy ! Component: 250 - total flux cleaned = -0.000607215 Jy ! Component: 300 - total flux cleaned = -0.000637813 Jy ! Component: 350 - total flux cleaned = -0.000522606 Jy ! Component: 400 - total flux cleaned = -0.000523049 Jy ! Component: 450 - total flux cleaned = -0.000496555 Jy ! Component: 500 - total flux cleaned = -0.000599362 Jy ! Component: 550 - total flux cleaned = -0.000674109 Jy ! Component: 600 - total flux cleaned = -0.000914496 Jy ! Component: 650 - total flux cleaned = -0.00107792 Jy ! Component: 700 - total flux cleaned = -0.00123797 Jy ! Component: 750 - total flux cleaned = -0.0013714 Jy ! Component: 800 - total flux cleaned = -0.00145848 Jy ! Component: 850 - total flux cleaned = -0.00160771 Jy ! Component: 900 - total flux cleaned = -0.00175375 Jy ! Component: 950 - total flux cleaned = -0.00183509 Jy ! Component: 1000 - total flux cleaned = -0.00191539 Jy ! Component: 1050 - total flux cleaned = -0.00195499 Jy ! Component: 1100 - total flux cleaned = -0.00201304 Jy ! Component: 1150 - total flux cleaned = -0.00208899 Jy ! Component: 1200 - total flux cleaned = -0.00221942 Jy ! Component: 1250 - total flux cleaned = -0.00232893 Jy ! Component: 1300 - total flux cleaned = -0.00238259 Jy ! Component: 1350 - total flux cleaned = -0.00238293 Jy ! Component: 1400 - total flux cleaned = -0.00252211 Jy ! Component: 1450 - total flux cleaned = -0.00260745 Jy ! Component: 1500 - total flux cleaned = -0.00264091 Jy ! Component: 1550 - total flux cleaned = -0.00270744 Jy ! Component: 1600 - total flux cleaned = -0.00277261 Jy ! Component: 1650 - total flux cleaned = -0.00278863 Jy ! Component: 1700 - total flux cleaned = -0.00280455 Jy ! Component: 1750 - total flux cleaned = -0.00288273 Jy ! Component: 1800 - total flux cleaned = -0.00289796 Jy ! Component: 1850 - total flux cleaned = -0.00292851 Jy ! Component: 1900 - total flux cleaned = -0.00289842 Jy ! Component: 1950 - total flux cleaned = -0.00292847 Jy ! Component: 2000 - total flux cleaned = -0.00289917 Jy ! Total flux subtracted in 2048 components = -0.0029139 Jy ! Clean residual min=-0.000830 max=0.000866 Jy/beam ! Clean residual mean=0.000010 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.364416 Jy keep ! Adding 134 model components to the UV plane model. ! The established model now contains 256 components and 0.364415 Jy ![Exited script file: muppet] wmap "J0919+7825_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 10.44 at 11.71 degrees (North through East) ! Clean map min=-0.0020357 max=0.33883 Jy/beam ! Writing clean map to FITS file: J0919+7825_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.338827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293437 device "J0919+7825_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0919+7825_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259811 0.259811 0.519622 1.03924 2.07849 4.15698 8.31395 16.6279 33.2558 66.5116 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.338 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.195 x 10.44 at 11.71 degrees (North through East) ! Clean map min=-0.0020357 max=0.33883 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0919+7825_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0919+7825_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0919+7825_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:51:49 2006