! Started logfile: J0909+8327_X_2006_02_16_yyk_uvs.log on Wed Jul 5 11:50:18 2006 obs J0909+8327_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0909+8327_X_2006_02_16_yyk_uva.fits ! AN table 1: 872 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.991514 visibilities/baseline/integration-bin. ! Found source: J0909+8327 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 155628 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0909+8327_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.0992786 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6283 mas, bmaj=2.718 mas, bpa=9.869 degrees ! Estimated noise=1.25595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0585884 Jy ! Component: 100 - total flux cleaned = 0.0789972 Jy ! Total flux subtracted in 100 components = 0.0789972 Jy ! Clean residual min=-0.007570 max=0.010245 Jy/beam ! Clean residual mean=-0.000004 rms=0.002241 Jy/beam ! Combined flux in latest and established models = 0.0789971 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0789971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.062365Jy sigma=1.219392 ! Fit after self-cal, rms=0.062148Jy sigma=1.214183 ! Inverting map and beam ! Estimated beam: bmin=0.6283 mas, bmaj=2.718 mas, bpa=9.869 degrees ! Estimated noise=1.25595 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.918 mas, bpa=8.905 degrees ! Estimated noise=0.665522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151486 Jy ! Component: 100 - total flux cleaned = 0.0217838 Jy ! Component: 150 - total flux cleaned = 0.0253093 Jy ! Component: 200 - total flux cleaned = 0.0273638 Jy ! Total flux subtracted in 200 components = 0.0273638 Jy ! Clean residual min=-0.007015 max=0.014306 Jy/beam ! Clean residual mean=-0.000093 rms=0.002631 Jy/beam ! Combined flux in latest and established models = 0.106361 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 26 components and 0.106361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059934Jy sigma=1.161155 ! Fit after self-cal, rms=0.059877Jy sigma=1.160489 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.918 at 8.905 degrees (North through East) ! Clean map min=-0.0068102 max=0.074617 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.059877Jy sigma=1.160489 ! Fit after self-cal, rms=0.059877Jy sigma=1.160489 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059877Jy sigma=1.160489 ! Fit after self-cal, rms=0.059865Jy sigma=1.160439 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.918 mas, bpa=8.905 degrees ! Estimated noise=0.665522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 2.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.016571 Jy ! Component: 100 - total flux cleaned = 0.0243261 Jy ! Component: 150 - total flux cleaned = 0.0284787 Jy ! Component: 200 - total flux cleaned = 0.0308476 Jy ! Total flux subtracted in 200 components = 0.0308476 Jy ! Clean residual min=-0.005136 max=0.008488 Jy/beam ! Clean residual mean=-0.000027 rms=0.001525 Jy/beam ! Combined flux in latest and established models = 0.137209 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 69 components and 0.137209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056817Jy sigma=1.088071 ! Fit after self-cal, rms=0.056440Jy sigma=1.080793 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056440Jy sigma=1.080793 ! Fit after self-cal, rms=0.052207Jy sigma=0.998318 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, 1). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00791322 Jy ! Component: 100 - total flux cleaned = 0.0102727 Jy ! Component: 150 - total flux cleaned = 0.0118378 Jy ! Component: 200 - total flux cleaned = 0.0129067 Jy ! Total flux subtracted in 200 components = 0.0129067 Jy ! Clean residual min=-0.003844 max=0.004070 Jy/beam ! Clean residual mean=-0.000008 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 0.150115 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 94 components and 0.150115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051207Jy sigma=0.975928 ! Fit after self-cal, rms=0.051044Jy sigma=0.972275 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.918 at 8.905 degrees (North through East) ! Clean map min=-0.003791 max=0.074413 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=3.54 mas, bpa=4.979 degrees ! Estimated noise=0.847993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244652 Jy ! Component: 100 - total flux cleaned = 0.00398474 Jy ! Component: 150 - total flux cleaned = 0.00478046 Jy ! Component: 200 - total flux cleaned = 0.00541721 Jy ! Total flux subtracted in 200 components = 0.00541721 Jy ! Clean residual min=-0.003674 max=0.003294 Jy/beam ! Clean residual mean=0.000005 rms=0.001197 Jy/beam ! Combined flux in latest and established models = 0.155532 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 0.155532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050930Jy sigma=0.969136 ! Fit after self-cal, rms=0.050891Jy sigma=0.968306 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6283 mas, bmaj=2.718 mas, bpa=9.869 degrees ! Estimated noise=1.25595 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0627898 Jy ! Component: 100 - total flux cleaned = 0.0854657 Jy ! Component: 150 - total flux cleaned = 0.0995328 Jy ! Component: 200 - total flux cleaned = 0.110024 Jy ! Total flux subtracted in 200 components = 0.110024 Jy ! Clean residual min=-0.006724 max=0.006510 Jy/beam ! Clean residual mean=-0.000001 rms=0.001600 Jy/beam ! Combined flux in latest and established models = 0.110024 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.110024 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.918 mas, bpa=8.905 degrees ! Estimated noise=0.665522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 1.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0137335 Jy ! Component: 100 - total flux cleaned = 0.0223323 Jy ! Component: 150 - total flux cleaned = 0.0286246 Jy ! Component: 200 - total flux cleaned = 0.0335234 Jy ! Total flux subtracted in 200 components = 0.0335234 Jy ! Clean residual min=-0.004157 max=0.003703 Jy/beam ! Clean residual mean=-0.000022 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.143548 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 74 components and 0.143548 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.121 mas, bmaj=3.54 mas, bpa=4.979 degrees ! Estimated noise=0.847993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00642741 Jy ! Component: 100 - total flux cleaned = 0.00850983 Jy ! Component: 150 - total flux cleaned = 0.00956661 Jy ! Component: 200 - total flux cleaned = 0.010554 Jy ! Total flux subtracted in 200 components = 0.010554 Jy ! Clean residual min=-0.004518 max=0.003143 Jy/beam ! Clean residual mean=-0.000001 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.154102 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 116 components and 0.154102 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8712 mas, bmaj=2.918 mas, bpa=8.905 degrees ! Estimated noise=0.665522 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248809 Jy ! Component: 100 - total flux cleaned = 0.000638232 Jy ! Component: 150 - total flux cleaned = 0.0008479 Jy ! Component: 200 - total flux cleaned = 0.00110803 Jy ! Total flux subtracted in 200 components = 0.00110803 Jy ! Clean residual min=-0.003385 max=0.002451 Jy/beam ! Clean residual mean=0.000003 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.15521 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 149 components and 0.15521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050481Jy sigma=0.961249 ! Fit after self-cal, rms=0.050451Jy sigma=0.960623 wmodel J0909+8327_X_2006_02_16_yyk\_map.mod ! Writing 149 model components to file: J0909+8327_X_2006_02_16_yyk_map.mod wobs J0909+8327_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0909+8327_X_2006_02_16_yyk_uvs.fits wwins J0909+8327_X_2006_02_16_yyk\_map.win ! wwins: Wrote 4 windows to J0909+8327_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145036 Jy ! Component: 100 - total flux cleaned = -0.00233469 Jy ! Component: 150 - total flux cleaned = -0.00277119 Jy ! Component: 200 - total flux cleaned = -0.00304879 Jy ! Component: 250 - total flux cleaned = -0.00334987 Jy ! Component: 300 - total flux cleaned = -0.00349392 Jy ! Component: 350 - total flux cleaned = -0.00359782 Jy ! Component: 400 - total flux cleaned = -0.00359923 Jy ! Component: 450 - total flux cleaned = -0.00360044 Jy ! Component: 500 - total flux cleaned = -0.00356943 Jy ! Component: 550 - total flux cleaned = -0.00347818 Jy ! Component: 600 - total flux cleaned = -0.00353831 Jy ! Component: 650 - total flux cleaned = -0.00350903 Jy ! Component: 700 - total flux cleaned = -0.00356533 Jy ! Component: 750 - total flux cleaned = -0.00359282 Jy ! Component: 800 - total flux cleaned = -0.00378125 Jy ! Component: 850 - total flux cleaned = -0.00383372 Jy ! Component: 900 - total flux cleaned = -0.00398961 Jy ! Component: 950 - total flux cleaned = -0.00404056 Jy ! Component: 1000 - total flux cleaned = -0.00411586 Jy ! Component: 1050 - total flux cleaned = -0.00433731 Jy ! Component: 1100 - total flux cleaned = -0.00448227 Jy ! Component: 1150 - total flux cleaned = -0.00471928 Jy ! Component: 1200 - total flux cleaned = -0.0049061 Jy ! Component: 1250 - total flux cleaned = -0.00518222 Jy ! Component: 1300 - total flux cleaned = -0.00549875 Jy ! Component: 1350 - total flux cleaned = -0.00572158 Jy ! Component: 1400 - total flux cleaned = -0.00602915 Jy ! Component: 1450 - total flux cleaned = -0.00626708 Jy ! Component: 1500 - total flux cleaned = -0.00656616 Jy ! Component: 1550 - total flux cleaned = -0.00684019 Jy ! Component: 1600 - total flux cleaned = -0.00715215 Jy ! Component: 1650 - total flux cleaned = -0.00735761 Jy ! Component: 1700 - total flux cleaned = -0.00756097 Jy ! Component: 1750 - total flux cleaned = -0.00778208 Jy ! Component: 1800 - total flux cleaned = -0.00804038 Jy ! Component: 1850 - total flux cleaned = -0.00825648 Jy ! Component: 1900 - total flux cleaned = -0.00841205 Jy ! Component: 1950 - total flux cleaned = -0.00864321 Jy ! Component: 2000 - total flux cleaned = -0.00881493 Jy ! Total flux subtracted in 2048 components = -0.00898525 Jy ! Clean residual min=-0.001135 max=0.001096 Jy/beam ! Clean residual mean=-0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.146224 Jy keep ! Adding 132 model components to the UV plane model. ! The established model now contains 281 components and 0.146224 Jy ![Exited script file: muppet] wmap "J0909+8327_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.918 at 8.905 degrees (North through East) ! Clean map min=-0.0029653 max=0.07442 Jy/beam ! Writing clean map to FITS file: J0909+8327_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0744203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000354486 device "J0909+8327_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0909+8327_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.42899 1.42899 2.85798 5.71596 11.4319 22.8638 45.7277 91.4553 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.074 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8712 x 2.918 at 8.905 degrees (North through East) ! Clean map min=-0.0029653 max=0.07442 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0909+8327_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0909+8327_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0909+8327_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:50:40 2006