! Started logfile: J0909+0121_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:47:57 2006 obs J0909+0121_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0909+0121_S_2006_02_16_yyk_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J0909+0121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 24424 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0909+0121_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.21394 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.665 mas, bmaj=6.528 mas, bpa=-1.577 degrees ! Estimated noise=2.02809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.993344 Jy ! Component: 100 - total flux cleaned = 1.15027 Jy ! Total flux subtracted in 100 components = 1.15027 Jy ! Clean residual min=-0.058409 max=0.079105 Jy/beam ! Clean residual mean=0.000029 rms=0.016765 Jy/beam ! Combined flux in latest and established models = 1.15027 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.15027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258457Jy sigma=3.843761 ! Fit after self-cal, rms=0.258346Jy sigma=3.841420 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=7.565 mas, bpa=-2.007 degrees ! Estimated noise=1.60436 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0704333 Jy ! Component: 100 - total flux cleaned = 0.0990173 Jy ! Component: 150 - total flux cleaned = 0.11102 Jy ! Component: 200 - total flux cleaned = 0.114839 Jy ! Total flux subtracted in 200 components = 0.114839 Jy ! Clean residual min=-0.049099 max=0.077779 Jy/beam ! Clean residual mean=-0.000160 rms=0.016974 Jy/beam ! Combined flux in latest and established models = 1.26511 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 34 components and 1.26511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239801Jy sigma=3.607351 ! Fit after self-cal, rms=0.239777Jy sigma=3.607036 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.136 x 7.565 at -2.007 degrees (North through East) ! Clean map min=-0.047857 max=1.1457 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00287 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.89 HN 0.97 KP 0.92 ! LA 1.14 MK 0.88 NL 1.22 OV 0.95 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.99428 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.92 HN 0.99 KP 0.95 ! LA 1.11 MK 0.98 NL 1.29 OV 0.95 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.952957 ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 0.93 HN 1.00 KP 0.95 ! LA 0.88 MK 1.07 NL 1.39 OV 0.99 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04107 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 0.93 KP 0.85 ! LA 0.75 MK 1.06 NL 1.31 OV 0.83 ! PT 0.89 SC 1.12 ! ! ! Fit before self-cal, rms=0.239777Jy sigma=3.607036 ! Fit after self-cal, rms=0.131872Jy sigma=1.835736 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131872Jy sigma=1.835736 ! Fit after self-cal, rms=0.131991Jy sigma=1.835436 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=7.816 mas, bpa=-1.738 degrees ! Estimated noise=1.57279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, 13.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377535 Jy ! Component: 100 - total flux cleaned = 0.0427406 Jy ! Component: 150 - total flux cleaned = 0.0411898 Jy ! Component: 200 - total flux cleaned = 0.040443 Jy ! Total flux subtracted in 200 components = 0.040443 Jy ! Clean residual min=-0.011211 max=0.012804 Jy/beam ! Clean residual mean=-0.000008 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 1.30556 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 82 components and 1.30556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124437Jy sigma=1.659466 ! Fit after self-cal, rms=0.124528Jy sigma=1.654002 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124528Jy sigma=1.654002 ! Fit after self-cal, rms=0.121944Jy sigma=1.624600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015478 Jy ! Component: 100 - total flux cleaned = 0.00208075 Jy ! Component: 150 - total flux cleaned = 0.00232332 Jy ! Component: 200 - total flux cleaned = 0.00232521 Jy ! Total flux subtracted in 200 components = 0.00232521 Jy ! Clean residual min=-0.009267 max=0.010264 Jy/beam ! Clean residual mean=-0.000012 rms=0.002790 Jy/beam ! Combined flux in latest and established models = 1.30788 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 1.30788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121095Jy sigma=1.609093 ! Fit after self-cal, rms=0.120698Jy sigma=1.604902 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 7.816 at -1.738 degrees (North through East) ! Clean map min=-0.0094337 max=1.1428 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120698Jy sigma=1.604902 ! Fit after self-cal, rms=0.094718Jy sigma=1.031021 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094718Jy sigma=1.031021 ! Fit after self-cal, rms=0.094690Jy sigma=1.030117 ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=7.864 mas, bpa=-1.725 degrees ! Estimated noise=1.57321 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146725 Jy ! Component: 100 - total flux cleaned = 0.000150126 Jy ! Component: 150 - total flux cleaned = 0.000370256 Jy ! Component: 200 - total flux cleaned = 0.00038336 Jy ! Total flux subtracted in 200 components = 0.00038336 Jy ! Clean residual min=-0.007101 max=0.008029 Jy/beam ! Clean residual mean=-0.000018 rms=0.002075 Jy/beam ! Combined flux in latest and established models = 1.30826 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 1.30827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093437Jy sigma=1.007757 ! Fit after self-cal, rms=0.093428Jy sigma=1.007297 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093428Jy sigma=1.007297 ! Fit after self-cal, rms=0.093024Jy sigma=0.995107 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093024Jy sigma=0.995107 ! Fit after self-cal, rms=0.093031Jy sigma=0.995080 ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.888 mas, bpa=-1.679 degrees ! Estimated noise=1.57433 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00175206 Jy ! Component: 100 - total flux cleaned = -0.00226128 Jy ! Component: 150 - total flux cleaned = -0.0021286 Jy ! Component: 200 - total flux cleaned = -0.00213329 Jy ! Total flux subtracted in 200 components = -0.00213329 Jy ! Clean residual min=-0.006468 max=0.007432 Jy/beam ! Clean residual mean=-0.000020 rms=0.001921 Jy/beam ! Combined flux in latest and established models = 1.30613 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 117 components and 1.30613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092426Jy sigma=0.985205 ! Fit after self-cal, rms=0.092419Jy sigma=0.985040 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.385 mas, bmaj=12.49 mas, bpa=7.795 degrees ! Estimated noise=1.99745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130532 Jy ! Component: 100 - total flux cleaned = 0.00149356 Jy ! Component: 150 - total flux cleaned = 0.00181868 Jy ! Component: 200 - total flux cleaned = 0.00181585 Jy ! Total flux subtracted in 200 components = 0.00181585 Jy ! Clean residual min=-0.008094 max=0.008706 Jy/beam ! Clean residual mean=-0.000036 rms=0.002478 Jy/beam ! Combined flux in latest and established models = 1.30795 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 137 components and 1.30795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092415Jy sigma=0.984419 ! Fit after self-cal, rms=0.092399Jy sigma=0.984186 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.624 mas, bpa=-1.784 degrees ! Estimated noise=2.00448 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.981853 Jy ! Component: 100 - total flux cleaned = 1.13706 Jy ! Component: 150 - total flux cleaned = 1.18979 Jy ! Component: 200 - total flux cleaned = 1.22098 Jy ! Total flux subtracted in 200 components = 1.22098 Jy ! Clean residual min=-0.010505 max=0.015285 Jy/beam ! Clean residual mean=0.000073 rms=0.003675 Jy/beam ! Combined flux in latest and established models = 1.22098 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 1.22098 Jy ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.888 mas, bpa=-1.679 degrees ! Estimated noise=1.57433 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0292119 Jy ! Component: 100 - total flux cleaned = 0.0476143 Jy ! Component: 150 - total flux cleaned = 0.0597823 Jy ! Component: 200 - total flux cleaned = 0.0659703 Jy ! Total flux subtracted in 200 components = 0.0659703 Jy ! Clean residual min=-0.007378 max=0.008484 Jy/beam ! Clean residual mean=0.000016 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 1.28695 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 62 components and 1.28695 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.385 mas, bmaj=12.49 mas, bpa=7.795 degrees ! Estimated noise=1.99745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985188 Jy ! Component: 100 - total flux cleaned = 0.0145822 Jy ! Component: 150 - total flux cleaned = 0.0165539 Jy ! Component: 200 - total flux cleaned = 0.0177691 Jy ! Total flux subtracted in 200 components = 0.0177691 Jy ! Clean residual min=-0.007707 max=0.008773 Jy/beam ! Clean residual mean=-0.000021 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 1.30472 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 1.30472 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=7.888 mas, bpa=-1.679 degrees ! Estimated noise=1.57433 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00025528 Jy ! Component: 100 - total flux cleaned = -5.54244e-05 Jy ! Component: 150 - total flux cleaned = 0.000369509 Jy ! Component: 200 - total flux cleaned = 0.000363636 Jy ! Total flux subtracted in 200 components = 0.000363636 Jy ! Clean residual min=-0.005940 max=0.007174 Jy/beam ! Clean residual mean=-0.000018 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 1.30509 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 1.30509 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091855Jy sigma=0.981021 ! Fit after self-cal, rms=0.091818Jy sigma=0.980311 wmodel J0909+0121_S_2006_02_16_yyk\_map.mod ! Writing 102 model components to file: J0909+0121_S_2006_02_16_yyk_map.mod wobs J0909+0121_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0909+0121_S_2006_02_16_yyk_uvs.fits wwins J0909+0121_S_2006_02_16_yyk\_map.win ! wwins: Wrote 2 windows to J0909+0121_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289568 Jy ! Component: 100 - total flux cleaned = 0.00435869 Jy ! Component: 150 - total flux cleaned = 0.00559396 Jy ! Component: 200 - total flux cleaned = 0.00694189 Jy ! Component: 250 - total flux cleaned = 0.00820709 Jy ! Component: 300 - total flux cleaned = 0.00906568 Jy ! Component: 350 - total flux cleaned = 0.00988736 Jy ! Component: 400 - total flux cleaned = 0.0106751 Jy ! Component: 450 - total flux cleaned = 0.0112004 Jy ! Component: 500 - total flux cleaned = 0.0113431 Jy ! Component: 550 - total flux cleaned = 0.0114836 Jy ! Component: 600 - total flux cleaned = 0.0115507 Jy ! Component: 650 - total flux cleaned = 0.0118123 Jy ! Component: 700 - total flux cleaned = 0.012067 Jy ! Component: 750 - total flux cleaned = 0.0123773 Jy ! Component: 800 - total flux cleaned = 0.0123767 Jy ! Component: 850 - total flux cleaned = 0.0125539 Jy ! Component: 900 - total flux cleaned = 0.0126119 Jy ! Component: 950 - total flux cleaned = 0.0127796 Jy ! Component: 1000 - total flux cleaned = 0.0126144 Jy ! Component: 1050 - total flux cleaned = 0.0126675 Jy ! Component: 1100 - total flux cleaned = 0.0125099 Jy ! Component: 1150 - total flux cleaned = 0.0126643 Jy ! Component: 1200 - total flux cleaned = 0.0126131 Jy ! Component: 1250 - total flux cleaned = 0.0128634 Jy ! Component: 1300 - total flux cleaned = 0.0127653 Jy ! Component: 1350 - total flux cleaned = 0.0129588 Jy ! Component: 1400 - total flux cleaned = 0.013054 Jy ! Component: 1450 - total flux cleaned = 0.0131006 Jy ! Component: 1500 - total flux cleaned = 0.0131017 Jy ! Component: 1550 - total flux cleaned = 0.0131924 Jy ! Component: 1600 - total flux cleaned = 0.0132809 Jy ! Component: 1650 - total flux cleaned = 0.0134986 Jy ! Component: 1700 - total flux cleaned = 0.0134561 Jy ! Component: 1750 - total flux cleaned = 0.0134995 Jy ! Component: 1800 - total flux cleaned = 0.0136659 Jy ! Component: 1850 - total flux cleaned = 0.0136651 Jy ! Component: 1900 - total flux cleaned = 0.0137458 Jy ! Component: 1950 - total flux cleaned = 0.0139852 Jy ! Component: 2000 - total flux cleaned = 0.0141425 Jy ! Total flux subtracted in 2048 components = 0.0144148 Jy ! Clean residual min=-0.002491 max=0.002613 Jy/beam ! Clean residual mean=-0.000014 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 1.3195 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 225 components and 1.3195 Jy ![Exited script file: muppet] wmap "J0909+0121_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 7.888 at -1.679 degrees (North through East) ! Clean map min=-0.0058372 max=1.1489 Jy/beam ! Writing clean map to FITS file: J0909+0121_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.14894 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000733533 device "J0909+0121_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0909+0121_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.191532 0.191532 0.383065 0.766129 1.53226 3.06452 6.12903 12.2581 24.5161 49.0323 98.0645 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.148 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.207 x 7.888 at -1.679 degrees (North through East) ! Clean map min=-0.0058372 max=1.1489 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0909+0121_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0909+0121_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0909+0121_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:48:19 2006