! Started logfile: J0909+0121_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:47:34 2006 obs J0909+0121_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0909+0121_S_2006_02_14_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.815556 visibilities/baseline/integration-bin. ! Found source: J0909+0121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 20552 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0909+0121_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.32402 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=6.673 mas, bpa=-2.219 degrees ! Estimated noise=2.20981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.09116 Jy ! Component: 100 - total flux cleaned = 1.27788 Jy ! Total flux subtracted in 100 components = 1.27788 Jy ! Clean residual min=-0.035056 max=0.053118 Jy/beam ! Clean residual mean=-0.000000 rms=0.011570 Jy/beam ! Combined flux in latest and established models = 1.27788 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.27788 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.224185Jy sigma=3.659515 ! Fit after self-cal, rms=0.223916Jy sigma=3.655036 ! Inverting map and beam ! Estimated beam: bmin=2.53 mas, bmaj=6.673 mas, bpa=-2.219 degrees ! Estimated noise=2.20981 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=8.025 mas, bpa=-5.317 degrees ! Estimated noise=1.77384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0688452 Jy ! Component: 100 - total flux cleaned = 0.0978265 Jy ! Component: 150 - total flux cleaned = 0.110532 Jy ! Component: 200 - total flux cleaned = 0.113308 Jy ! Total flux subtracted in 200 components = 0.113308 Jy ! Clean residual min=-0.031391 max=0.040878 Jy/beam ! Clean residual mean=-0.000410 rms=0.010533 Jy/beam ! Combined flux in latest and established models = 1.39119 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 31 components and 1.39119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198676Jy sigma=3.349054 ! Fit after self-cal, rms=0.198644Jy sigma=3.348642 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 8.025 at -5.317 degrees (North through East) ! Clean map min=-0.030333 max=1.2557 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01414 ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.92 HN 0.99 KP 0.96 ! LA 1.22 MK 0.91 NL 0.97 OV 1.00 ! PT 1.05 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993957 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.01 KP 0.98 ! LA 1.16 MK 0.99 NL 0.99 OV 1.01 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.962872 ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.96 HN 1.03 KP 0.97 ! LA 0.93 MK 1.09 NL 1.04 OV 1.04 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.05024 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.96 HN 0.96 KP 0.90 ! LA 0.78 MK 1.09 NL 0.98 OV 0.87 ! PT 0.93 SC 1.10 ! ! ! Fit before self-cal, rms=0.198644Jy sigma=3.348642 ! Fit after self-cal, rms=0.118054Jy sigma=2.035185 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118054Jy sigma=2.035185 ! Fit after self-cal, rms=0.118072Jy sigma=2.035113 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.205 mas, bmaj=8.183 mas, bpa=-5.111 degrees ! Estimated noise=1.77522 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17.5, 16.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.04156 Jy ! Component: 100 - total flux cleaned = 0.0585268 Jy ! Component: 150 - total flux cleaned = 0.0650366 Jy ! Component: 200 - total flux cleaned = 0.0679544 Jy ! Total flux subtracted in 200 components = 0.0679544 Jy ! Clean residual min=-0.010540 max=0.012267 Jy/beam ! Clean residual mean=0.000002 rms=0.003035 Jy/beam ! Combined flux in latest and established models = 1.45914 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 80 components and 1.45914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109738Jy sigma=1.832577 ! Fit after self-cal, rms=0.109613Jy sigma=1.830775 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109613Jy sigma=1.830775 ! Fit after self-cal, rms=0.107978Jy sigma=1.805872 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00172143 Jy ! Component: 100 - total flux cleaned = 0.00195379 Jy ! Component: 150 - total flux cleaned = 0.00252005 Jy ! Component: 200 - total flux cleaned = 0.00314661 Jy ! Total flux subtracted in 200 components = 0.00314661 Jy ! Clean residual min=-0.009178 max=0.011144 Jy/beam ! Clean residual mean=-0.000005 rms=0.002877 Jy/beam ! Combined flux in latest and established models = 1.46229 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 1.46229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107243Jy sigma=1.795819 ! Fit after self-cal, rms=0.107060Jy sigma=1.794019 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.205 x 8.183 at -5.111 degrees (North through East) ! Clean map min=-0.0088166 max=1.2702 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107060Jy sigma=1.794019 ! Fit after self-cal, rms=0.064108Jy sigma=1.009045 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064108Jy sigma=1.009045 ! Fit after self-cal, rms=0.064079Jy sigma=1.008835 ! Inverting map and beam ! Estimated beam: bmin=3.203 mas, bmaj=8.202 mas, bpa=-5.108 degrees ! Estimated noise=1.76999 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290911 Jy ! Component: 100 - total flux cleaned = 0.00169377 Jy ! Component: 150 - total flux cleaned = 0.00127555 Jy ! Component: 200 - total flux cleaned = 0.00127834 Jy ! Total flux subtracted in 200 components = 0.00127834 Jy ! Clean residual min=-0.008131 max=0.008759 Jy/beam ! Clean residual mean=0.000001 rms=0.002194 Jy/beam ! Combined flux in latest and established models = 1.46357 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 116 components and 1.46357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063343Jy sigma=0.994520 ! Fit after self-cal, rms=0.063317Jy sigma=0.994300 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063317Jy sigma=0.994300 ! Fit after self-cal, rms=0.062528Jy sigma=0.979089 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062528Jy sigma=0.979089 ! Fit after self-cal, rms=0.062524Jy sigma=0.979087 ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.216 mas, bpa=-5.12 degrees ! Estimated noise=1.7705 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000678743 Jy ! Component: 100 - total flux cleaned = -0.00104626 Jy ! Component: 150 - total flux cleaned = -0.00126047 Jy ! Component: 200 - total flux cleaned = -0.00145849 Jy ! Total flux subtracted in 200 components = -0.00145849 Jy ! Clean residual min=-0.007850 max=0.008353 Jy/beam ! Clean residual mean=0.000004 rms=0.002077 Jy/beam ! Combined flux in latest and established models = 1.46211 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 129 components and 1.46211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062133Jy sigma=0.972365 ! Fit after self-cal, rms=0.062123Jy sigma=0.972286 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=12.46 mas, bpa=4.997 degrees ! Estimated noise=2.25958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243799 Jy ! Component: 100 - total flux cleaned = 0.00285678 Jy ! Component: 150 - total flux cleaned = 0.00305344 Jy ! Component: 200 - total flux cleaned = 0.00314468 Jy ! Total flux subtracted in 200 components = 0.00314468 Jy ! Clean residual min=-0.007862 max=0.007664 Jy/beam ! Clean residual mean=-0.000004 rms=0.002478 Jy/beam ! Combined flux in latest and established models = 1.46525 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 138 components and 1.46525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062225Jy sigma=0.972985 ! Fit after self-cal, rms=0.062194Jy sigma=0.972760 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=6.755 mas, bpa=-2.463 degrees ! Estimated noise=2.18244 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.07771 Jy ! Component: 100 - total flux cleaned = 1.2591 Jy ! Component: 150 - total flux cleaned = 1.32451 Jy ! Component: 200 - total flux cleaned = 1.36046 Jy ! Total flux subtracted in 200 components = 1.36046 Jy ! Clean residual min=-0.012023 max=0.016488 Jy/beam ! Clean residual mean=0.000116 rms=0.004315 Jy/beam ! Combined flux in latest and established models = 1.36046 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 1.36046 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.216 mas, bpa=-5.12 degrees ! Estimated noise=1.7705 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334626 Jy ! Component: 100 - total flux cleaned = 0.054797 Jy ! Component: 150 - total flux cleaned = 0.0696991 Jy ! Component: 200 - total flux cleaned = 0.0791833 Jy ! Total flux subtracted in 200 components = 0.0791833 Jy ! Clean residual min=-0.008640 max=0.009606 Jy/beam ! Clean residual mean=0.000049 rms=0.002553 Jy/beam ! Combined flux in latest and established models = 1.43965 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 73 components and 1.43965 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=12.46 mas, bpa=4.997 degrees ! Estimated noise=2.25958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123351 Jy ! Component: 100 - total flux cleaned = 0.0192682 Jy ! Component: 150 - total flux cleaned = 0.021873 Jy ! Component: 200 - total flux cleaned = 0.0237758 Jy ! Total flux subtracted in 200 components = 0.0237758 Jy ! Clean residual min=-0.006871 max=0.008146 Jy/beam ! Clean residual mean=0.000006 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 1.46342 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 94 components and 1.46342 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.216 mas, bpa=-5.12 degrees ! Estimated noise=1.7705 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 8.895e-05 Jy ! Component: 100 - total flux cleaned = -0.000406544 Jy ! Component: 150 - total flux cleaned = -0.000819512 Jy ! Component: 200 - total flux cleaned = -0.000705527 Jy ! Total flux subtracted in 200 components = -0.000705527 Jy ! Clean residual min=-0.007207 max=0.008085 Jy/beam ! Clean residual mean=0.000001 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 1.46272 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 1.46272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062044Jy sigma=0.967988 ! Fit after self-cal, rms=0.061906Jy sigma=0.966416 wmodel J0909+0121_S_2006_02_14_yyk\_map.mod ! Writing 118 model components to file: J0909+0121_S_2006_02_14_yyk_map.mod wobs J0909+0121_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0909+0121_S_2006_02_14_yyk_uvs.fits wwins J0909+0121_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0909+0121_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347346 Jy ! Component: 100 - total flux cleaned = -0.000367776 Jy ! Component: 150 - total flux cleaned = -0.000911533 Jy ! Component: 200 - total flux cleaned = -0.00142702 Jy ! Component: 250 - total flux cleaned = -0.00201216 Jy ! Component: 300 - total flux cleaned = -0.00266106 Jy ! Component: 350 - total flux cleaned = -0.00336481 Jy ! Component: 400 - total flux cleaned = -0.00378787 Jy ! Component: 450 - total flux cleaned = -0.00435998 Jy ! Component: 500 - total flux cleaned = -0.0047507 Jy ! Component: 550 - total flux cleaned = -0.00490532 Jy ! Component: 600 - total flux cleaned = -0.00534436 Jy ! Component: 650 - total flux cleaned = -0.00591388 Jy ! Component: 700 - total flux cleaned = -0.00653508 Jy ! Component: 750 - total flux cleaned = -0.00693551 Jy ! Component: 800 - total flux cleaned = -0.00713021 Jy ! Component: 850 - total flux cleaned = -0.00738463 Jy ! Component: 900 - total flux cleaned = -0.0076329 Jy ! Component: 950 - total flux cleaned = -0.00781377 Jy ! Component: 1000 - total flux cleaned = -0.0081086 Jy ! Component: 1050 - total flux cleaned = -0.0082804 Jy ! Component: 1100 - total flux cleaned = -0.00839379 Jy ! Component: 1150 - total flux cleaned = -0.00867167 Jy ! Component: 1200 - total flux cleaned = -0.00894345 Jy ! Component: 1250 - total flux cleaned = -0.00899699 Jy ! Component: 1300 - total flux cleaned = -0.00925763 Jy ! Component: 1350 - total flux cleaned = -0.00946045 Jy ! Component: 1400 - total flux cleaned = -0.00940929 Jy ! Component: 1450 - total flux cleaned = -0.00945845 Jy ! Component: 1500 - total flux cleaned = -0.00940948 Jy ! Component: 1550 - total flux cleaned = -0.0093615 Jy ! Component: 1600 - total flux cleaned = -0.00931414 Jy ! Component: 1650 - total flux cleaned = -0.00898902 Jy ! Component: 1700 - total flux cleaned = -0.00885174 Jy ! Component: 1750 - total flux cleaned = -0.00867129 Jy ! Component: 1800 - total flux cleaned = -0.00862673 Jy ! Component: 1850 - total flux cleaned = -0.00836305 Jy ! Component: 1900 - total flux cleaned = -0.00818931 Jy ! Component: 1950 - total flux cleaned = -0.00806 Jy ! Component: 2000 - total flux cleaned = -0.0077199 Jy ! Total flux subtracted in 2048 components = -0.00759403 Jy ! Clean residual min=-0.002441 max=0.002834 Jy/beam ! Clean residual mean=0.000006 rms=0.000822 Jy/beam ! Combined flux in latest and established models = 1.45512 Jy keep ! Adding 110 model components to the UV plane model. ! The established model now contains 228 components and 1.45512 Jy ![Exited script file: muppet] wmap "J0909+0121_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.216 at -5.12 degrees (North through East) ! Clean map min=-0.0054796 max=1.2711 Jy/beam ! Writing clean map to FITS file: J0909+0121_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.27106 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000808937 device "J0909+0121_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0909+0121_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.190929 0.190929 0.381857 0.763715 1.52743 3.05486 6.10972 12.2194 24.4389 48.8777 97.7555 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.271 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.216 at -5.12 degrees (North through East) ! Clean map min=-0.0054796 max=1.2711 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0909+0121_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0909+0121_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0909+0121_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:47:57 2006