! Started logfile: J0750+8241_X_2006_02_14_yyk_uvs.log on Wed Jul 5 11:42:15 2006 obs J0750+8241_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0750+8241_X_2006_02_14_yyk_uva.fits ! AN table 1: 873 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.877511 visibilities/baseline/integration-bin. ! Found source: J0750+8241 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 137892 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0750+8241_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.343845 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6052 mas, bmaj=2.71 mas, bpa=10.28 degrees ! Estimated noise=1.27087 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.261063 Jy ! Component: 100 - total flux cleaned = 0.326678 Jy ! Total flux subtracted in 100 components = 0.326678 Jy ! Clean residual min=-0.015506 max=0.021481 Jy/beam ! Clean residual mean=0.000028 rms=0.004670 Jy/beam ! Combined flux in latest and established models = 0.326678 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.326678 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.112515Jy sigma=2.071865 ! Fit after self-cal, rms=0.111854Jy sigma=2.060954 ! Inverting map and beam ! Estimated beam: bmin=0.6052 mas, bmaj=2.71 mas, bpa=10.28 degrees ! Estimated noise=1.27087 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8339 mas, bmaj=2.843 mas, bpa=9.168 degrees ! Estimated noise=0.695825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0552151 Jy ! Component: 100 - total flux cleaned = 0.0833143 Jy ! Component: 150 - total flux cleaned = 0.0999195 Jy ! Component: 200 - total flux cleaned = 0.110022 Jy ! Total flux subtracted in 200 components = 0.110022 Jy ! Clean residual min=-0.013898 max=0.017742 Jy/beam ! Clean residual mean=-0.000069 rms=0.004002 Jy/beam ! Combined flux in latest and established models = 0.4367 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.4367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093616Jy sigma=1.623886 ! Fit after self-cal, rms=0.093178Jy sigma=1.618381 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8339 x 2.843 at 9.168 degrees (North through East) ! Clean map min=-0.012935 max=0.32235 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.99757 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.06 HN 1.07 KP 0.93 ! LA 0.96 MK 0.98 NL 1.03 OV 1.04 ! PT 0.95 SC 1.05 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01443 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.07 KP 0.88 ! LA 0.94 MK 0.96 NL 0.99 OV 1.02 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00426 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 0.98 KP 0.81 ! LA 0.94 MK 1.03 NL 0.98 OV 1.04 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.980064 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.14 HN 0.97 KP 0.85 ! LA 0.93 MK 1.07 NL 0.98 OV 1.13 ! PT 1.09 SC 1.06 ! ! ! Fit before self-cal, rms=0.093178Jy sigma=1.618381 ! Fit after self-cal, rms=0.089079Jy sigma=1.491505 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089079Jy sigma=1.491505 ! Fit after self-cal, rms=0.089096Jy sigma=1.491432 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8529 mas, bmaj=2.852 mas, bpa=9.343 degrees ! Estimated noise=0.689253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 4.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145753 Jy ! Component: 100 - total flux cleaned = 0.0190063 Jy ! Component: 150 - total flux cleaned = 0.0197299 Jy ! Component: 200 - total flux cleaned = 0.0204238 Jy ! Total flux subtracted in 200 components = 0.0204238 Jy ! Clean residual min=-0.004841 max=0.005934 Jy/beam ! Clean residual mean=-0.000035 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.457124 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 84 components and 0.457124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087389Jy sigma=1.451663 ! Fit after self-cal, rms=0.087175Jy sigma=1.448450 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087175Jy sigma=1.448450 ! Fit after self-cal, rms=0.063471Jy sigma=1.016839 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182681 Jy ! Component: 100 - total flux cleaned = 0.00226961 Jy ! Component: 150 - total flux cleaned = 0.00244503 Jy ! Component: 200 - total flux cleaned = 0.00260004 Jy ! Total flux subtracted in 200 components = 0.00260004 Jy ! Clean residual min=-0.003571 max=0.004284 Jy/beam ! Clean residual mean=-0.000033 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.459724 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 99 components and 0.459724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062210Jy sigma=0.991241 ! Fit after self-cal, rms=0.061775Jy sigma=0.985852 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8529 x 2.852 at 9.343 degrees (North through East) ! Clean map min=-0.0037945 max=0.32771 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061775Jy sigma=0.985852 ! Fit after self-cal, rms=0.059995Jy sigma=0.962659 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059995Jy sigma=0.962659 ! Fit after self-cal, rms=0.059925Jy sigma=0.962224 ! Inverting map and beam ! Estimated beam: bmin=0.8424 mas, bmaj=2.869 mas, bpa=9.164 degrees ! Estimated noise=0.684006 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411586 Jy ! Component: 100 - total flux cleaned = 0.00484922 Jy ! Component: 150 - total flux cleaned = 0.00520221 Jy ! Component: 200 - total flux cleaned = 0.0053771 Jy ! Total flux subtracted in 200 components = 0.0053771 Jy ! Clean residual min=-0.002853 max=0.003341 Jy/beam ! Clean residual mean=-0.000022 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.465101 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 120 components and 0.465101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059676Jy sigma=0.956263 ! Fit after self-cal, rms=0.059596Jy sigma=0.955543 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059596Jy sigma=0.955543 ! Fit after self-cal, rms=0.057916Jy sigma=0.930174 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057916Jy sigma=0.930174 ! Fit after self-cal, rms=0.057902Jy sigma=0.930142 ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.868 mas, bpa=9.133 degrees ! Estimated noise=0.683697 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152212 Jy ! Component: 100 - total flux cleaned = 0.00209469 Jy ! Component: 150 - total flux cleaned = 0.00219043 Jy ! Component: 200 - total flux cleaned = 0.00232383 Jy ! Total flux subtracted in 200 components = 0.00232383 Jy ! Clean residual min=-0.002825 max=0.003253 Jy/beam ! Clean residual mean=-0.000018 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.467425 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.467425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057808Jy sigma=0.928133 ! Fit after self-cal, rms=0.057782Jy sigma=0.927911 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.262 mas, bmaj=3.574 mas, bpa=11.28 degrees ! Estimated noise=0.894508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000890214 Jy ! Component: 100 - total flux cleaned = 0.00092843 Jy ! Component: 150 - total flux cleaned = 0.000962211 Jy ! Component: 200 - total flux cleaned = 0.000962289 Jy ! Total flux subtracted in 200 components = 0.000962289 Jy ! Clean residual min=-0.003844 max=0.004401 Jy/beam ! Clean residual mean=-0.000038 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 0.468387 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 0.468387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057785Jy sigma=0.927572 ! Fit after self-cal, rms=0.057769Jy sigma=0.927492 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6083 mas, bmaj=2.712 mas, bpa=10.25 degrees ! Estimated noise=1.26007 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.265429 Jy ! Component: 100 - total flux cleaned = 0.330187 Jy ! Component: 150 - total flux cleaned = 0.363381 Jy ! Component: 200 - total flux cleaned = 0.38449 Jy ! Total flux subtracted in 200 components = 0.38449 Jy ! Clean residual min=-0.006965 max=0.008734 Jy/beam ! Clean residual mean=-0.000003 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.38449 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.38449 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.868 mas, bpa=9.133 degrees ! Estimated noise=0.683697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0271323 Jy ! Component: 100 - total flux cleaned = 0.0434868 Jy ! Component: 150 - total flux cleaned = 0.0547109 Jy ! Component: 200 - total flux cleaned = 0.0626985 Jy ! Total flux subtracted in 200 components = 0.0626985 Jy ! Clean residual min=-0.003571 max=0.004420 Jy/beam ! Clean residual mean=-0.000059 rms=0.001326 Jy/beam ! Combined flux in latest and established models = 0.447189 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 97 components and 0.447189 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.262 mas, bmaj=3.574 mas, bpa=11.28 degrees ! Estimated noise=0.894508 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977615 Jy ! Component: 100 - total flux cleaned = 0.0150363 Jy ! Component: 150 - total flux cleaned = 0.018022 Jy ! Component: 200 - total flux cleaned = 0.0194183 Jy ! Total flux subtracted in 200 components = 0.0194183 Jy ! Clean residual min=-0.003636 max=0.004749 Jy/beam ! Clean residual mean=-0.000045 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.466607 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 135 components and 0.466607 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8423 mas, bmaj=2.868 mas, bpa=9.133 degrees ! Estimated noise=0.683697 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000805687 Jy ! Component: 100 - total flux cleaned = 0.0010433 Jy ! Component: 150 - total flux cleaned = 0.00117099 Jy ! Component: 200 - total flux cleaned = 0.00138216 Jy ! Total flux subtracted in 200 components = 0.00138216 Jy ! Clean residual min=-0.002810 max=0.003052 Jy/beam ! Clean residual mean=-0.000017 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.467989 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 155 components and 0.467989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057729Jy sigma=0.927087 ! Fit after self-cal, rms=0.057711Jy sigma=0.926869 wmodel J0750+8241_X_2006_02_14_yyk\_map.mod ! Writing 155 model components to file: J0750+8241_X_2006_02_14_yyk_map.mod wobs J0750+8241_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0750+8241_X_2006_02_14_yyk_uvs.fits wwins J0750+8241_X_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0750+8241_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937924 Jy ! Component: 100 - total flux cleaned = 0.00142615 Jy ! Component: 150 - total flux cleaned = 0.00188251 Jy ! Component: 200 - total flux cleaned = 0.00226893 Jy ! Component: 250 - total flux cleaned = 0.00243281 Jy ! Component: 300 - total flux cleaned = 0.00258909 Jy ! Component: 350 - total flux cleaned = 0.00262614 Jy ! Component: 400 - total flux cleaned = 0.00273376 Jy ! Component: 450 - total flux cleaned = 0.00269923 Jy ! Component: 500 - total flux cleaned = 0.00276626 Jy ! Component: 550 - total flux cleaned = 0.00283187 Jy ! Component: 600 - total flux cleaned = 0.00289612 Jy ! Component: 650 - total flux cleaned = 0.00292769 Jy ! Component: 700 - total flux cleaned = 0.0028668 Jy ! Component: 750 - total flux cleaned = 0.00289633 Jy ! Component: 800 - total flux cleaned = 0.00283834 Jy ! Component: 850 - total flux cleaned = 0.0028946 Jy ! Component: 900 - total flux cleaned = 0.00289453 Jy ! Component: 950 - total flux cleaned = 0.00289379 Jy ! Component: 1000 - total flux cleaned = 0.00289352 Jy ! Component: 1050 - total flux cleaned = 0.00284204 Jy ! Component: 1100 - total flux cleaned = 0.002843 Jy ! Component: 1150 - total flux cleaned = 0.00289282 Jy ! Component: 1200 - total flux cleaned = 0.00291647 Jy ! Component: 1250 - total flux cleaned = 0.00286854 Jy ! Component: 1300 - total flux cleaned = 0.00293891 Jy ! Component: 1350 - total flux cleaned = 0.00291595 Jy ! Component: 1400 - total flux cleaned = 0.00298375 Jy ! Component: 1450 - total flux cleaned = 0.00305042 Jy ! Component: 1500 - total flux cleaned = 0.00313776 Jy ! Component: 1550 - total flux cleaned = 0.00322356 Jy ! Component: 1600 - total flux cleaned = 0.00326582 Jy ! Component: 1650 - total flux cleaned = 0.00337012 Jy ! Component: 1700 - total flux cleaned = 0.00341107 Jy ! Component: 1750 - total flux cleaned = 0.00345163 Jy ! Component: 1800 - total flux cleaned = 0.00357164 Jy ! Component: 1850 - total flux cleaned = 0.00355183 Jy ! Component: 1900 - total flux cleaned = 0.00357112 Jy ! Component: 1950 - total flux cleaned = 0.00362912 Jy ! Component: 2000 - total flux cleaned = 0.0036485 Jy ! Total flux subtracted in 2048 components = 0.00368617 Jy ! Clean residual min=-0.001141 max=0.000995 Jy/beam ! Clean residual mean=-0.000004 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.471675 Jy keep ! Adding 133 model components to the UV plane model. ! The established model now contains 288 components and 0.471675 Jy ![Exited script file: muppet] wmap "J0750+8241_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8423 x 2.868 at 9.133 degrees (North through East) ! Clean map min=-0.002018 max=0.32646 Jy/beam ! Writing clean map to FITS file: J0750+8241_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.326457 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000352621 device "J0750+8241_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0750+8241_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.324044 0.324044 0.648088 1.29618 2.59235 5.1847 10.3694 20.7388 41.4776 82.9552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.326 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8423 x 2.868 at 9.133 degrees (North through East) ! Clean map min=-0.002018 max=0.32646 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0750+8241_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0750+8241_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0750+8241_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:42:41 2006