! Started logfile: J0733+5022_X_2006_02_23_yyk_uvs.log on Wed Jul 5 11:41:25 2006 obs J0733+5022_X_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0733+5022_X_2006_02_23_yyk_uva.fits ! AN table 1: 219 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.849417 visibilities/baseline/integration-bin. ! Found source: J0733+5022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2397 lines of history. ! ! Reading 33484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0733+5022_X_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.55117 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6826 mas, bmaj=2.434 mas, bpa=19.44 degrees ! Estimated noise=1.7378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.456814 Jy ! Component: 100 - total flux cleaned = 0.551307 Jy ! Total flux subtracted in 100 components = 0.551307 Jy ! Clean residual min=-0.017018 max=0.028204 Jy/beam ! Clean residual mean=-0.000024 rms=0.005687 Jy/beam ! Combined flux in latest and established models = 0.551307 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.551307 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.094277Jy sigma=1.744757 ! Fit after self-cal, rms=0.094122Jy sigma=1.738650 ! Inverting map and beam ! Estimated beam: bmin=0.6826 mas, bmaj=2.434 mas, bpa=19.44 degrees ! Estimated noise=1.7378 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8674 mas, bmaj=2.557 mas, bpa=17.92 degrees ! Estimated noise=1.33915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0453117 Jy ! Component: 100 - total flux cleaned = 0.0659209 Jy ! Component: 150 - total flux cleaned = 0.0770891 Jy ! Component: 200 - total flux cleaned = 0.0835483 Jy ! Total flux subtracted in 200 components = 0.0835483 Jy ! Clean residual min=-0.012809 max=0.013578 Jy/beam ! Clean residual mean=0.000013 rms=0.003476 Jy/beam ! Combined flux in latest and established models = 0.634855 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.634855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077557Jy sigma=1.384181 ! Fit after self-cal, rms=0.077430Jy sigma=1.380953 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8674 x 2.557 at 17.92 degrees (North through East) ! Clean map min=-0.01235 max=0.54028 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.993218 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.07 KP 0.97 ! LA 1.01 MK 1.02 NL 1.02 OV 0.98 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.01603 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.04 KP 0.91 ! LA 0.96 MK 0.98 NL 1.00 OV 0.97 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 1.00425 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 0.98 KP 0.86 ! LA 0.99 MK 1.01 NL 0.98 OV 1.01 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Amplitude normalization factor in sub-array 1: 0.982906 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.05 HN 1.00 KP 0.88 ! LA 0.96 MK 1.05 NL 0.98 OV 1.05 ! PT 1.13 SC 1.04 ! ! ! Fit before self-cal, rms=0.077430Jy sigma=1.380953 ! Fit after self-cal, rms=0.060993Jy sigma=1.169531 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060993Jy sigma=1.169531 ! Fit after self-cal, rms=0.060918Jy sigma=1.169073 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.878 mas, bmaj=2.573 mas, bpa=17.86 degrees ! Estimated noise=1.33975 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127375 Jy ! Component: 100 - total flux cleaned = 0.0164474 Jy ! Component: 150 - total flux cleaned = 0.0174455 Jy ! Component: 200 - total flux cleaned = 0.0183 Jy ! Total flux subtracted in 200 components = 0.0183 Jy ! Clean residual min=-0.004470 max=0.006273 Jy/beam ! Clean residual mean=-0.000016 rms=0.001451 Jy/beam ! Combined flux in latest and established models = 0.653155 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 64 components and 0.653155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059081Jy sigma=1.126529 ! Fit after self-cal, rms=0.058959Jy sigma=1.124517 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058959Jy sigma=1.124517 ! Fit after self-cal, rms=0.052697Jy sigma=0.992335 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261576 Jy ! Component: 100 - total flux cleaned = 0.00294544 Jy ! Component: 150 - total flux cleaned = 0.00331934 Jy ! Component: 200 - total flux cleaned = 0.00365229 Jy ! Total flux subtracted in 200 components = 0.00365229 Jy ! Clean residual min=-0.004131 max=0.005534 Jy/beam ! Clean residual mean=-0.000009 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.656808 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 88 components and 0.656808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052413Jy sigma=0.985780 ! Fit after self-cal, rms=0.052032Jy sigma=0.978554 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.878 x 2.573 at 17.86 degrees (North through East) ! Clean map min=-0.0040043 max=0.54153 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052032Jy sigma=0.978554 ! Fit after self-cal, rms=0.050528Jy sigma=0.939736 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050528Jy sigma=0.939736 ! Fit after self-cal, rms=0.050506Jy sigma=0.939360 ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.572 mas, bpa=17.85 degrees ! Estimated noise=1.33681 mJy/beam. ! Added new window around map position (-9.6, 6.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669758 Jy ! Component: 100 - total flux cleaned = 0.00873471 Jy ! Component: 150 - total flux cleaned = 0.00944841 Jy ! Component: 200 - total flux cleaned = 0.00996754 Jy ! Total flux subtracted in 200 components = 0.00996754 Jy ! Clean residual min=-0.003840 max=0.003944 Jy/beam ! Clean residual mean=0.000008 rms=0.000964 Jy/beam ! Combined flux in latest and established models = 0.666775 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 114 components and 0.666775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049703Jy sigma=0.923620 ! Fit after self-cal, rms=0.049688Jy sigma=0.923229 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049688Jy sigma=0.923229 ! Fit after self-cal, rms=0.048943Jy sigma=0.909806 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048943Jy sigma=0.909806 ! Fit after self-cal, rms=0.048944Jy sigma=0.909800 ! Inverting map and beam ! Estimated beam: bmin=0.8786 mas, bmaj=2.571 mas, bpa=17.83 degrees ! Estimated noise=1.3349 mJy/beam. ! Added new window around map position (-13, -19). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154524 Jy ! Component: 100 - total flux cleaned = 0.00186418 Jy ! Component: 150 - total flux cleaned = 0.00255123 Jy ! Component: 200 - total flux cleaned = 0.00296762 Jy ! Total flux subtracted in 200 components = 0.00296762 Jy ! Clean residual min=-0.003475 max=0.002801 Jy/beam ! Clean residual mean=0.000007 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.669743 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 136 components and 0.669743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048445Jy sigma=0.899531 ! Fit after self-cal, rms=0.048429Jy sigma=0.899328 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=3.094 mas, bpa=9.31 degrees ! Estimated noise=1.73222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107658 Jy ! Component: 100 - total flux cleaned = 0.0017159 Jy ! Component: 150 - total flux cleaned = 0.00212112 Jy ! Component: 200 - total flux cleaned = 0.0024125 Jy ! Total flux subtracted in 200 components = 0.0024125 Jy ! Clean residual min=-0.003060 max=0.002629 Jy/beam ! Clean residual mean=0.000030 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.672155 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 162 components and 0.672155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048374Jy sigma=0.897836 ! Fit after self-cal, rms=0.048358Jy sigma=0.897695 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6874 mas, bmaj=2.438 mas, bpa=19.4 degrees ! Estimated noise=1.73035 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.457016 Jy ! Component: 100 - total flux cleaned = 0.550108 Jy ! Component: 150 - total flux cleaned = 0.5881 Jy ! Component: 200 - total flux cleaned = 0.609236 Jy ! Total flux subtracted in 200 components = 0.609236 Jy ! Clean residual min=-0.007886 max=0.009461 Jy/beam ! Clean residual mean=-0.000021 rms=0.002310 Jy/beam ! Combined flux in latest and established models = 0.609236 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.609236 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8786 mas, bmaj=2.571 mas, bpa=17.83 degrees ! Estimated noise=1.3349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8, -25.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162467 Jy ! Component: 100 - total flux cleaned = 0.0236159 Jy ! Component: 150 - total flux cleaned = 0.0292008 Jy ! Component: 200 - total flux cleaned = 0.0344032 Jy ! Total flux subtracted in 200 components = 0.0344032 Jy ! Clean residual min=-0.004769 max=0.004234 Jy/beam ! Clean residual mean=-0.000017 rms=0.001226 Jy/beam ! Combined flux in latest and established models = 0.643639 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 53 components and 0.643639 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=3.094 mas, bpa=9.31 degrees ! Estimated noise=1.73222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697763 Jy ! Component: 100 - total flux cleaned = 0.0105179 Jy ! Component: 150 - total flux cleaned = 0.0135863 Jy ! Component: 200 - total flux cleaned = 0.0161193 Jy ! Total flux subtracted in 200 components = 0.0161193 Jy ! Clean residual min=-0.003258 max=0.003245 Jy/beam ! Clean residual mean=-0.000002 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.659759 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 92 components and 0.659759 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8786 mas, bmaj=2.571 mas, bpa=17.83 degrees ! Estimated noise=1.3349 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019603 Jy ! Component: 100 - total flux cleaned = 0.00247441 Jy ! Component: 150 - total flux cleaned = 0.00315045 Jy ! Component: 200 - total flux cleaned = 0.00404085 Jy ! Total flux subtracted in 200 components = 0.00404085 Jy ! Clean residual min=-0.003820 max=0.002773 Jy/beam ! Clean residual mean=-0.000004 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.6638 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 120 components and 0.6638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.048577Jy sigma=0.901435 ! Fit after self-cal, rms=0.048534Jy sigma=0.900724 wmodel J0733+5022_X_2006_02_23_yyk\_map.mod ! Writing 120 model components to file: J0733+5022_X_2006_02_23_yyk_map.mod wobs J0733+5022_X_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0733+5022_X_2006_02_23_yyk_uvs.fits wwins J0733+5022_X_2006_02_23_yyk\_map.win ! wwins: Wrote 5 windows to J0733+5022_X_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151644 Jy ! Component: 100 - total flux cleaned = -0.00268763 Jy ! Component: 150 - total flux cleaned = -0.00322374 Jy ! Component: 200 - total flux cleaned = -0.00372432 Jy ! Component: 250 - total flux cleaned = -0.00428468 Jy ! Component: 300 - total flux cleaned = -0.00440773 Jy ! Component: 350 - total flux cleaned = -0.00460614 Jy ! Component: 400 - total flux cleaned = -0.00479789 Jy ! Component: 450 - total flux cleaned = -0.00509447 Jy ! Component: 500 - total flux cleaned = -0.00523823 Jy ! Component: 550 - total flux cleaned = -0.00523808 Jy ! Component: 600 - total flux cleaned = -0.00523802 Jy ! Component: 650 - total flux cleaned = -0.00530469 Jy ! Component: 700 - total flux cleaned = -0.00537057 Jy ! Component: 750 - total flux cleaned = -0.00549946 Jy ! Component: 800 - total flux cleaned = -0.00559358 Jy ! Component: 850 - total flux cleaned = -0.00568643 Jy ! Component: 900 - total flux cleaned = -0.00583851 Jy ! Component: 950 - total flux cleaned = -0.0058384 Jy ! Component: 1000 - total flux cleaned = -0.00598586 Jy ! Component: 1050 - total flux cleaned = -0.00604332 Jy ! Component: 1100 - total flux cleaned = -0.00604343 Jy ! Component: 1150 - total flux cleaned = -0.00607218 Jy ! Component: 1200 - total flux cleaned = -0.00618379 Jy ! Component: 1250 - total flux cleaned = -0.00618346 Jy ! Component: 1300 - total flux cleaned = -0.0061562 Jy ! Component: 1350 - total flux cleaned = -0.00623697 Jy ! Component: 1400 - total flux cleaned = -0.00610371 Jy ! Component: 1450 - total flux cleaned = -0.00597229 Jy ! Component: 1500 - total flux cleaned = -0.00592016 Jy ! Component: 1550 - total flux cleaned = -0.00576569 Jy ! Component: 1600 - total flux cleaned = -0.00568908 Jy ! Component: 1650 - total flux cleaned = -0.0055874 Jy ! Component: 1700 - total flux cleaned = -0.00548696 Jy ! Component: 1750 - total flux cleaned = -0.00536245 Jy ! Component: 1800 - total flux cleaned = -0.00516546 Jy ! Component: 1850 - total flux cleaned = -0.00516555 Jy ! Component: 1900 - total flux cleaned = -0.00502028 Jy ! Component: 1950 - total flux cleaned = -0.00490069 Jy ! Component: 2000 - total flux cleaned = -0.00485323 Jy ! Total flux subtracted in 2048 components = -0.00471182 Jy ! Clean residual min=-0.001627 max=0.001847 Jy/beam ! Clean residual mean=0.000005 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.659088 Jy keep ! Adding 120 model components to the UV plane model. ! The established model now contains 240 components and 0.659088 Jy ![Exited script file: muppet] wmap "J0733+5022_X_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8786 x 2.571 at 17.83 degrees (North through East) ! Clean map min=-0.0028862 max=0.54031 Jy/beam ! Writing clean map to FITS file: J0733+5022_X_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.540312 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000448602 device "J0733+5022_X_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0733+5022_X_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.249079 0.249079 0.498159 0.996318 1.99264 3.98527 7.97054 15.9411 31.8822 63.7643 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.54 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8786 x 2.571 at 17.83 degrees (North through East) ! Clean map min=-0.0028862 max=0.54031 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0733+5022_X_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0733+5022_X_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0733+5022_X_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:41:50 2006