! Started logfile: J0644+8018_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:36:51 2006 obs J0644+8018_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0644+8018_S_2006_02_14_yyk_uva.fits ! AN table 1: 880 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.990758 visibilities/baseline/integration-bin. ! Found source: J0644+8018 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 156936 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0644+8018_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.137154 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.336 mas, bmaj=10.61 mas, bpa=5.571 degrees ! Estimated noise=1.36351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922396 Jy ! Component: 100 - total flux cleaned = 0.119 Jy ! Total flux subtracted in 100 components = 0.119 Jy ! Clean residual min=-0.012510 max=0.037868 Jy/beam ! Clean residual mean=0.000169 rms=0.004470 Jy/beam ! Combined flux in latest and established models = 0.119 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078516Jy sigma=1.431539 ! Fit after self-cal, rms=0.078429Jy sigma=1.429201 ! Inverting map ! Added new window around map position (3.5, -31.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357529 Jy ! Component: 100 - total flux cleaned = 0.0506562 Jy ! Total flux subtracted in 100 components = 0.0506562 Jy ! Clean residual min=-0.009548 max=0.010430 Jy/beam ! Clean residual mean=0.000095 rms=0.002583 Jy/beam ! Combined flux in latest and established models = 0.169656 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 41 components and 0.169656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066346Jy sigma=1.170858 ! Fit after self-cal, rms=0.065720Jy sigma=1.156697 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.132 mas, bmaj=10.63 mas, bpa=4.742 degrees ! Estimated noise=0.690137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152904 Jy ! Component: 100 - total flux cleaned = 0.0250498 Jy ! Component: 150 - total flux cleaned = 0.0317883 Jy ! Component: 200 - total flux cleaned = 0.0366369 Jy ! Total flux subtracted in 200 components = 0.0366369 Jy ! Clean residual min=-0.004305 max=0.004658 Jy/beam ! Clean residual mean=-0.000025 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.206293 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 65 components and 0.206293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062524Jy sigma=1.091862 ! Fit after self-cal, rms=0.062444Jy sigma=1.089377 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.132 x 10.63 at 4.742 degrees (North through East) ! Clean map min=-0.0039285 max=0.11368 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.03119 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 1.03 KP 0.91 ! LA 1.16 MK 0.90 NL 0.90 OV 0.97 ! PT 1.02 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00271 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 1.00 KP 0.95 ! LA 1.14 MK 1.02 NL 0.94 OV 0.96 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.980176 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 0.93 KP 0.95 ! LA 0.93 MK 1.07 NL 1.05 OV 1.09 ! PT 1.07 SC 1.12 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.062444Jy sigma=1.089377 ! Fit after self-cal, rms=0.061835Jy sigma=1.071535 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061835Jy sigma=1.071535 ! Fit after self-cal, rms=0.061837Jy sigma=1.071469 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=10.48 mas, bpa=4.657 degrees ! Estimated noise=0.687035 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438084 Jy ! Component: 100 - total flux cleaned = 0.00744825 Jy ! Component: 150 - total flux cleaned = 0.00969711 Jy ! Component: 200 - total flux cleaned = 0.0113724 Jy ! Total flux subtracted in 200 components = 0.0113724 Jy ! Clean residual min=-0.003326 max=0.003557 Jy/beam ! Clean residual mean=0.000050 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.217665 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 84 components and 0.217665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061436Jy sigma=1.065253 ! Fit after self-cal, rms=0.061440Jy sigma=1.065038 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061440Jy sigma=1.065038 ! Fit after self-cal, rms=0.058445Jy sigma=1.009976 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170032 Jy ! Component: 100 - total flux cleaned = 0.00227371 Jy ! Component: 150 - total flux cleaned = 0.00256646 Jy ! Component: 200 - total flux cleaned = 0.00273924 Jy ! Total flux subtracted in 200 components = 0.00273924 Jy ! Clean residual min=-0.003081 max=0.003185 Jy/beam ! Clean residual mean=0.000049 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.220404 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 110 components and 0.220404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058336Jy sigma=1.008449 ! Fit after self-cal, rms=0.058197Jy sigma=1.005583 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 10.48 at 4.657 degrees (North through East) ! Clean map min=-0.0029381 max=0.11485 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058197Jy sigma=1.005583 ! Fit after self-cal, rms=0.057370Jy sigma=0.999768 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057370Jy sigma=0.999768 ! Fit after self-cal, rms=0.057362Jy sigma=0.999506 ! Inverting map and beam ! Estimated beam: bmin=3.115 mas, bmaj=10.39 mas, bpa=4.586 degrees ! Estimated noise=0.682543 mJy/beam. ! Added new window around map position (18.5, -32.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00206829 Jy ! Component: 100 - total flux cleaned = 0.00233072 Jy ! Component: 150 - total flux cleaned = 0.00279084 Jy ! Component: 200 - total flux cleaned = 0.00325427 Jy ! Total flux subtracted in 200 components = 0.00325427 Jy ! Clean residual min=-0.002796 max=0.002868 Jy/beam ! Clean residual mean=0.000037 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.223659 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.223659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057014Jy sigma=0.994261 ! Fit after self-cal, rms=0.057001Jy sigma=0.994008 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057001Jy sigma=0.994008 ! Fit after self-cal, rms=0.056700Jy sigma=0.991233 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056700Jy sigma=0.991233 ! Fit after self-cal, rms=0.056705Jy sigma=0.991134 ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=10.33 mas, bpa=4.314 degrees ! Estimated noise=0.675131 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000808749 Jy ! Component: 100 - total flux cleaned = 0.00118941 Jy ! Component: 150 - total flux cleaned = 0.00152075 Jy ! Component: 200 - total flux cleaned = 0.00191576 Jy ! Total flux subtracted in 200 components = 0.00191576 Jy ! Clean residual min=-0.002879 max=0.002635 Jy/beam ! Clean residual mean=0.000029 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.225574 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 154 components and 0.225574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056572Jy sigma=0.988969 ! Fit after self-cal, rms=0.056568Jy sigma=0.988844 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.131 mas, bmaj=11.47 mas, bpa=2.951 degrees ! Estimated noise=0.862074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169926 Jy ! Component: 100 - total flux cleaned = 0.00210367 Jy ! Component: 150 - total flux cleaned = 0.00236308 Jy ! Component: 200 - total flux cleaned = 0.00258972 Jy ! Total flux subtracted in 200 components = 0.00258972 Jy ! Clean residual min=-0.002711 max=0.002909 Jy/beam ! Clean residual mean=0.000047 rms=0.000768 Jy/beam ! Combined flux in latest and established models = 0.228164 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 185 components and 0.228164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056539Jy sigma=0.988370 ! Fit after self-cal, rms=0.056540Jy sigma=0.988299 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.322 mas, bmaj=10.53 mas, bpa=5.49 degrees ! Estimated noise=1.32071 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961043 Jy ! Component: 100 - total flux cleaned = 0.131398 Jy ! Component: 150 - total flux cleaned = 0.15243 Jy ! Component: 200 - total flux cleaned = 0.168266 Jy ! Total flux subtracted in 200 components = 0.168266 Jy ! Clean residual min=-0.007399 max=0.009565 Jy/beam ! Clean residual mean=0.000121 rms=0.002417 Jy/beam ! Combined flux in latest and established models = 0.168266 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.168266 Jy ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=10.33 mas, bpa=4.314 degrees ! Estimated noise=0.675131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (31.5, -61). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163974 Jy ! Component: 100 - total flux cleaned = 0.0271955 Jy ! Component: 150 - total flux cleaned = 0.0351715 Jy ! Component: 200 - total flux cleaned = 0.0413494 Jy ! Total flux subtracted in 200 components = 0.0413494 Jy ! Clean residual min=-0.003515 max=0.003516 Jy/beam ! Clean residual mean=0.000036 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.209615 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 92 components and 0.209615 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.131 mas, bmaj=11.47 mas, bpa=2.951 degrees ! Estimated noise=0.862074 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00723361 Jy ! Component: 100 - total flux cleaned = 0.0117406 Jy ! Component: 150 - total flux cleaned = 0.0137182 Jy ! Component: 200 - total flux cleaned = 0.0151879 Jy ! Total flux subtracted in 200 components = 0.0151879 Jy ! Clean residual min=-0.003233 max=0.003270 Jy/beam ! Clean residual mean=0.000045 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.224803 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 145 components and 0.224803 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=10.33 mas, bpa=4.314 degrees ! Estimated noise=0.675131 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151084 Jy ! Component: 100 - total flux cleaned = 0.00208922 Jy ! Component: 150 - total flux cleaned = 0.00251564 Jy ! Component: 200 - total flux cleaned = 0.00289545 Jy ! Total flux subtracted in 200 components = 0.00289545 Jy ! Clean residual min=-0.002786 max=0.003011 Jy/beam ! Clean residual mean=0.000024 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.227698 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 182 components and 0.227698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056576Jy sigma=0.989417 ! Fit after self-cal, rms=0.056550Jy sigma=0.988817 wmodel J0644+8018_S_2006_02_14_yyk\_map.mod ! Writing 182 model components to file: J0644+8018_S_2006_02_14_yyk_map.mod wobs J0644+8018_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0644+8018_S_2006_02_14_yyk_uvs.fits wwins J0644+8018_S_2006_02_14_yyk\_map.win ! wwins: Wrote 4 windows to J0644+8018_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000160633 Jy ! Component: 100 - total flux cleaned = -0.000290594 Jy ! Component: 150 - total flux cleaned = -0.000333476 Jy ! Component: 200 - total flux cleaned = -0.000334518 Jy ! Component: 250 - total flux cleaned = -0.000264357 Jy ! Component: 300 - total flux cleaned = -0.000264829 Jy ! Component: 350 - total flux cleaned = -7.39436e-05 Jy ! Component: 400 - total flux cleaned = -1.24742e-05 Jy ! Component: 450 - total flux cleaned = 1.74548e-05 Jy ! Component: 500 - total flux cleaned = 0.000104484 Jy ! Component: 550 - total flux cleaned = 0.000188413 Jy ! Component: 600 - total flux cleaned = 0.000271043 Jy ! Component: 650 - total flux cleaned = 0.000270886 Jy ! Component: 700 - total flux cleaned = 0.000323322 Jy ! Component: 750 - total flux cleaned = 0.000323399 Jy ! Component: 800 - total flux cleaned = 0.000272813 Jy ! Component: 850 - total flux cleaned = 0.000272404 Jy ! Component: 900 - total flux cleaned = 0.000174459 Jy ! Component: 950 - total flux cleaned = 0.000198661 Jy ! Component: 1000 - total flux cleaned = 0.000151421 Jy ! Component: 1050 - total flux cleaned = 0.000175444 Jy ! Component: 1100 - total flux cleaned = 0.000129857 Jy ! Component: 1150 - total flux cleaned = 0.000153056 Jy ! Component: 1200 - total flux cleaned = 0.000130587 Jy ! Component: 1250 - total flux cleaned = -2.28196e-06 Jy ! Component: 1300 - total flux cleaned = 1.98893e-05 Jy ! Component: 1350 - total flux cleaned = -2.34268e-05 Jy ! Component: 1400 - total flux cleaned = -2.36798e-05 Jy ! Component: 1450 - total flux cleaned = -6.61126e-05 Jy ! Component: 1500 - total flux cleaned = -0.000108018 Jy ! Component: 1550 - total flux cleaned = -0.000252416 Jy ! Component: 1600 - total flux cleaned = -0.000354301 Jy ! Component: 1650 - total flux cleaned = -0.000475178 Jy ! Component: 1700 - total flux cleaned = -0.000555021 Jy ! Component: 1750 - total flux cleaned = -0.000653937 Jy ! Component: 1800 - total flux cleaned = -0.000732205 Jy ! Component: 1850 - total flux cleaned = -0.000828897 Jy ! Component: 1900 - total flux cleaned = -0.000867331 Jy ! Component: 1950 - total flux cleaned = -0.000962179 Jy ! Component: 2000 - total flux cleaned = -0.00101858 Jy ! Total flux subtracted in 2048 components = -0.00107433 Jy ! Clean residual min=-0.001070 max=0.001029 Jy/beam ! Clean residual mean=0.000007 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.226624 Jy keep ! Adding 149 model components to the UV plane model. ! The established model now contains 331 components and 0.226624 Jy ![Exited script file: muppet] wmap "J0644+8018_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.109 x 10.33 at 4.314 degrees (North through East) ! Clean map min=-0.0020787 max=0.11139 Jy/beam ! Writing clean map to FITS file: J0644+8018_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11139 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000383341 device "J0644+8018_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0644+8018_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03243 1.03243 2.06485 4.1297 8.2594 16.5188 33.0376 66.0752 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.111 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.109 x 10.33 at 4.314 degrees (North through East) ! Clean map min=-0.0020787 max=0.11139 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0644+8018_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0644+8018_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0644+8018_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:37:16 2006