! Started logfile: J0626+8202_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:33:29 2006 obs J0626+8202_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0626+8202_S_2006_02_14_yyk_uva.fits ! AN table 1: 900 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.976222 visibilities/baseline/integration-bin. ! Found source: J0626+8202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 158148 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0626+8202_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.750568 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.359 mas, bmaj=10.42 mas, bpa=7.067 degrees ! Estimated noise=1.26583 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.616749 Jy ! Component: 100 - total flux cleaned = 0.724549 Jy ! Total flux subtracted in 100 components = 0.724549 Jy ! Clean residual min=-0.019043 max=0.030462 Jy/beam ! Clean residual mean=-0.000007 rms=0.005902 Jy/beam ! Combined flux in latest and established models = 0.724549 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.724549 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.127286Jy sigma=2.110149 ! Fit after self-cal, rms=0.126462Jy sigma=2.108690 ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=10.42 mas, bpa=7.081 degrees ! Estimated noise=1.27024 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=10.73 mas, bpa=6.018 degrees ! Estimated noise=0.703631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0381446 Jy ! Component: 100 - total flux cleaned = 0.0504024 Jy ! Component: 150 - total flux cleaned = 0.0523979 Jy ! Component: 200 - total flux cleaned = 0.0525298 Jy ! Total flux subtracted in 200 components = 0.0525298 Jy ! Clean residual min=-0.012710 max=0.016492 Jy/beam ! Clean residual mean=-0.000293 rms=0.003510 Jy/beam ! Combined flux in latest and established models = 0.777078 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.777078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114528Jy sigma=1.953501 ! Fit after self-cal, rms=0.114514Jy sigma=1.953300 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.124 x 10.73 at 6.018 degrees (North through East) ! Clean map min=-0.012001 max=0.72458 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00794 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.94 HN 0.98 KP 0.96 ! LA 1.19 MK 0.88 NL 0.94 OV 0.99 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.990698 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 1.00 KP 0.98 ! LA 1.16 MK 0.97 NL 0.95 OV 1.01 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.976437 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.03 KP 0.98 ! LA 0.94 MK 1.09 NL 1.05 OV 1.04 ! PT 1.08 SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03855 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 0.94 KP 0.90 ! LA 0.79 MK 1.09 NL 0.97 OV 0.86 ! PT 0.94 SC 1.14 ! ! ! Fit before self-cal, rms=0.114514Jy sigma=1.953300 ! Fit after self-cal, rms=0.084761Jy sigma=1.481737 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084761Jy sigma=1.481737 ! Fit after self-cal, rms=0.084762Jy sigma=1.481726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=10.66 mas, bpa=5.814 degrees ! Estimated noise=0.703807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00426339 Jy ! Component: 100 - total flux cleaned = 0.00476511 Jy ! Component: 150 - total flux cleaned = 0.00523085 Jy ! Component: 200 - total flux cleaned = 0.00558867 Jy ! Total flux subtracted in 200 components = 0.00558867 Jy ! Clean residual min=-0.003612 max=0.004113 Jy/beam ! Clean residual mean=-0.000031 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.782667 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.782667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084434Jy sigma=1.475862 ! Fit after self-cal, rms=0.084427Jy sigma=1.475732 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084427Jy sigma=1.475732 ! Fit after self-cal, rms=0.069466Jy sigma=1.213842 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000449321 Jy ! Component: 100 - total flux cleaned = 0.000707543 Jy ! Component: 150 - total flux cleaned = 0.000861483 Jy ! Component: 200 - total flux cleaned = 0.000859196 Jy ! Total flux subtracted in 200 components = 0.000859196 Jy ! Clean residual min=-0.003288 max=0.003990 Jy/beam ! Clean residual mean=-0.000031 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.783526 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.783526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069255Jy sigma=1.212061 ! Fit after self-cal, rms=0.068860Jy sigma=1.205015 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.173 x 10.66 at 5.814 degrees (North through East) ! Clean map min=-0.0031785 max=0.73057 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068860Jy sigma=1.205015 ! Fit after self-cal, rms=0.058938Jy sigma=1.031453 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058938Jy sigma=1.031453 ! Fit after self-cal, rms=0.058913Jy sigma=1.030939 ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=10.63 mas, bpa=5.713 degrees ! Estimated noise=0.702843 mJy/beam. ! Added new window around map position (4, -23). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470656 Jy ! Component: 100 - total flux cleaned = 0.00635528 Jy ! Component: 150 - total flux cleaned = 0.00710725 Jy ! Component: 200 - total flux cleaned = 0.00736686 Jy ! Total flux subtracted in 200 components = 0.00736686 Jy ! Clean residual min=-0.002739 max=0.002393 Jy/beam ! Clean residual mean=-0.000018 rms=0.000675 Jy/beam ! Combined flux in latest and established models = 0.790893 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 84 components and 0.790893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058592Jy sigma=1.024752 ! Fit after self-cal, rms=0.058580Jy sigma=1.024502 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058580Jy sigma=1.024502 ! Fit after self-cal, rms=0.054392Jy sigma=0.954216 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054392Jy sigma=0.954216 ! Fit after self-cal, rms=0.054392Jy sigma=0.954204 ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=10.63 mas, bpa=5.686 degrees ! Estimated noise=0.702444 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000676784 Jy ! Component: 100 - total flux cleaned = 0.00107619 Jy ! Component: 150 - total flux cleaned = 0.00137602 Jy ! Component: 200 - total flux cleaned = 0.00160271 Jy ! Total flux subtracted in 200 components = 0.00160271 Jy ! Clean residual min=-0.002507 max=0.002246 Jy/beam ! Clean residual mean=-0.000016 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.792496 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 103 components and 0.792496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054297Jy sigma=0.952577 ! Fit after self-cal, rms=0.054295Jy sigma=0.952519 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.14 mas, bpa=3.311 degrees ! Estimated noise=0.886966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010101 Jy ! Component: 100 - total flux cleaned = 0.00135511 Jy ! Component: 150 - total flux cleaned = 0.00143064 Jy ! Component: 200 - total flux cleaned = 0.00147155 Jy ! Total flux subtracted in 200 components = 0.00147155 Jy ! Clean residual min=-0.002505 max=0.002062 Jy/beam ! Clean residual mean=-0.000029 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.793968 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 118 components and 0.793968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054278Jy sigma=0.952343 ! Fit after self-cal, rms=0.054277Jy sigma=0.952278 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=10.35 mas, bpa=6.924 degrees ! Estimated noise=1.26189 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.614343 Jy ! Component: 100 - total flux cleaned = 0.715591 Jy ! Component: 150 - total flux cleaned = 0.753083 Jy ! Component: 200 - total flux cleaned = 0.7689 Jy ! Total flux subtracted in 200 components = 0.7689 Jy ! Clean residual min=-0.005070 max=0.006040 Jy/beam ! Clean residual mean=0.000001 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.7689 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.7689 Jy ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=10.63 mas, bpa=5.686 degrees ! Estimated noise=0.702444 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00903877 Jy ! Component: 100 - total flux cleaned = 0.0145011 Jy ! Component: 150 - total flux cleaned = 0.0183646 Jy ! Component: 200 - total flux cleaned = 0.0212147 Jy ! Total flux subtracted in 200 components = 0.0212147 Jy ! Clean residual min=-0.002665 max=0.002219 Jy/beam ! Clean residual mean=-0.000013 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.790114 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 60 components and 0.790114 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.318 mas, bmaj=12.14 mas, bpa=3.311 degrees ! Estimated noise=0.886966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271586 Jy ! Component: 100 - total flux cleaned = 0.00353396 Jy ! Component: 150 - total flux cleaned = 0.00407628 Jy ! Component: 200 - total flux cleaned = 0.0043167 Jy ! Total flux subtracted in 200 components = 0.0043167 Jy ! Clean residual min=-0.002748 max=0.001931 Jy/beam ! Clean residual mean=-0.000026 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.794431 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 104 components and 0.794431 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=10.63 mas, bpa=5.686 degrees ! Estimated noise=0.702444 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026248 Jy ! Component: 100 - total flux cleaned = 0.000447543 Jy ! Component: 150 - total flux cleaned = 0.000559296 Jy ! Component: 200 - total flux cleaned = 0.000660122 Jy ! Total flux subtracted in 200 components = 0.000660122 Jy ! Clean residual min=-0.002455 max=0.002228 Jy/beam ! Clean residual mean=-0.000013 rms=0.000603 Jy/beam ! Combined flux in latest and established models = 0.795091 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 0.795091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054321Jy sigma=0.952461 ! Fit after self-cal, rms=0.054317Jy sigma=0.952352 wmodel J0626+8202_S_2006_02_14_yyk\_map.mod ! Writing 125 model components to file: J0626+8202_S_2006_02_14_yyk_map.mod wobs J0626+8202_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0626+8202_S_2006_02_14_yyk_uvs.fits wwins J0626+8202_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0626+8202_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000616291 Jy ! Component: 100 - total flux cleaned = -0.000616349 Jy ! Component: 150 - total flux cleaned = -0.000650325 Jy ! Component: 200 - total flux cleaned = -0.000586261 Jy ! Component: 250 - total flux cleaned = -0.000433749 Jy ! Component: 300 - total flux cleaned = -0.000258527 Jy ! Component: 350 - total flux cleaned = -6.18285e-05 Jy ! Component: 400 - total flux cleaned = 1.90243e-05 Jy ! Component: 450 - total flux cleaned = 0.000150182 Jy ! Component: 500 - total flux cleaned = 0.000277092 Jy ! Component: 550 - total flux cleaned = 0.000301865 Jy ! Component: 600 - total flux cleaned = 0.000350538 Jy ! Component: 650 - total flux cleaned = 0.000490891 Jy ! Component: 700 - total flux cleaned = 0.000490365 Jy ! Component: 750 - total flux cleaned = 0.000534899 Jy ! Component: 800 - total flux cleaned = 0.000556281 Jy ! Component: 850 - total flux cleaned = 0.000642064 Jy ! Component: 900 - total flux cleaned = 0.000704779 Jy ! Component: 950 - total flux cleaned = 0.000787506 Jy ! Component: 1000 - total flux cleaned = 0.000827968 Jy ! Component: 1050 - total flux cleaned = 0.000928258 Jy ! Component: 1100 - total flux cleaned = 0.00110577 Jy ! Component: 1150 - total flux cleaned = 0.00122254 Jy ! Component: 1200 - total flux cleaned = 0.0013763 Jy ! Component: 1250 - total flux cleaned = 0.00145207 Jy ! Component: 1300 - total flux cleaned = 0.00160282 Jy ! Component: 1350 - total flux cleaned = 0.00180771 Jy ! Component: 1400 - total flux cleaned = 0.00195532 Jy ! Component: 1450 - total flux cleaned = 0.00208331 Jy ! Component: 1500 - total flux cleaned = 0.00220974 Jy ! Component: 1550 - total flux cleaned = 0.00233499 Jy ! Component: 1600 - total flux cleaned = 0.00245891 Jy ! Component: 1650 - total flux cleaned = 0.00259899 Jy ! Component: 1700 - total flux cleaned = 0.00270312 Jy ! Component: 1750 - total flux cleaned = 0.0027893 Jy ! Component: 1800 - total flux cleaned = 0.00294287 Jy ! Component: 1850 - total flux cleaned = 0.00301055 Jy ! Component: 1900 - total flux cleaned = 0.00307762 Jy ! Component: 1950 - total flux cleaned = 0.00317766 Jy ! Component: 2000 - total flux cleaned = 0.00326041 Jy ! Total flux subtracted in 2048 components = 0.00335877 Jy ! Clean residual min=-0.001032 max=0.000943 Jy/beam ! Clean residual mean=-0.000008 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.79845 Jy keep ! Adding 144 model components to the UV plane model. ! The established model now contains 269 components and 0.79845 Jy ![Exited script file: muppet] wmap "J0626+8202_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 10.63 at 5.686 degrees (North through East) ! Clean map min=-0.0019915 max=0.73098 Jy/beam ! Writing clean map to FITS file: J0626+8202_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.73098 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032725 device "J0626+8202_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0626+8202_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.134306 0.134306 0.268612 0.537225 1.07445 2.1489 4.2978 8.5956 17.1912 34.3824 68.7648 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.73 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.182 x 10.63 at 5.686 degrees (North through East) ! Clean map min=-0.0019915 max=0.73098 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0626+8202_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0626+8202_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0626+8202_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:33:54 2006