! Started logfile: J0555+3948_X_2006_02_14_yyk_uvs.log on Wed Jul 5 11:30:58 2006 obs J0555+3948_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0555+3948_X_2006_02_14_yyk_uva.fits ! AN table 1: 435 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.931596 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 72944 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0555+3948_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.38086 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7135 mas, bmaj=2.3 mas, bpa=-32.34 degrees ! Estimated noise=1.5372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.71194 Jy ! Component: 100 - total flux cleaned = 3.46331 Jy ! Total flux subtracted in 100 components = 3.46331 Jy ! Clean residual min=-0.104383 max=0.213725 Jy/beam ! Clean residual mean=-0.001071 rms=0.035893 Jy/beam ! Combined flux in latest and established models = 3.46331 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 3.46331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.577693Jy sigma=10.873244 ! Fit after self-cal, rms=0.566493Jy sigma=10.706892 ! Inverting map ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.288109 Jy ! Component: 100 - total flux cleaned = 0.426224 Jy ! Total flux subtracted in 100 components = 0.426224 Jy ! Clean residual min=-0.077716 max=0.083200 Jy/beam ! Clean residual mean=-0.000385 rms=0.020690 Jy/beam ! Combined flux in latest and established models = 3.88953 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 3.88953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416963Jy sigma=7.524934 ! Fit after self-cal, rms=0.415720Jy sigma=7.503792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.929 mas, bmaj=2.466 mas, bpa=-33.39 degrees ! Estimated noise=0.979045 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.125185 Jy ! Component: 100 - total flux cleaned = 0.191212 Jy ! Component: 150 - total flux cleaned = 0.229444 Jy ! Component: 200 - total flux cleaned = 0.244099 Jy ! Total flux subtracted in 200 components = 0.244099 Jy ! Clean residual min=-0.083185 max=0.080267 Jy/beam ! Clean residual mean=0.000149 rms=0.020963 Jy/beam ! Combined flux in latest and established models = 4.13363 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 57 components and 4.13363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386829Jy sigma=6.939244 ! Fit after self-cal, rms=0.386369Jy sigma=6.933569 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.929 x 2.466 at -33.39 degrees (North through East) ! Clean map min=-0.081144 max=3.216 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00023 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.05 KP 0.97 ! LA 1.01 MK 1.01 NL 1.00 OV 0.97 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01727 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.05 KP 0.91 ! LA 0.96 MK 0.97 NL 0.97 OV 0.96 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 1.00082 ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.04 HN 0.96 KP 0.86 ! LA 0.99 MK 1.03 NL 0.97 OV 0.99 ! PT 1.07 SC 0.99 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.976367 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.09 HN 0.99 KP 0.89 ! LA 0.98 MK 1.04 NL 0.98 OV 1.04 ! PT 1.14 SC 1.05 ! ! ! Fit before self-cal, rms=0.386369Jy sigma=6.933569 ! Fit after self-cal, rms=0.305365Jy sigma=5.235904 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305365Jy sigma=5.235904 ! Fit after self-cal, rms=0.305339Jy sigma=5.235895 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9393 mas, bmaj=2.477 mas, bpa=-33.52 degrees ! Estimated noise=0.979246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156137 Jy ! Component: 100 - total flux cleaned = 0.00234426 Jy ! Component: 150 - total flux cleaned = 0.00264623 Jy ! Component: 200 - total flux cleaned = 0.0026402 Jy ! Total flux subtracted in 200 components = 0.0026402 Jy ! Clean residual min=-0.018169 max=0.018060 Jy/beam ! Clean residual mean=-0.000026 rms=0.003969 Jy/beam ! Combined flux in latest and established models = 4.13627 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 4.13627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304865Jy sigma=5.221884 ! Fit after self-cal, rms=0.304653Jy sigma=5.219902 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304653Jy sigma=5.219902 ! Fit after self-cal, rms=0.121777Jy sigma=2.217259 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.8, -17.4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00782569 Jy ! Component: 100 - total flux cleaned = 0.00421504 Jy ! Component: 150 - total flux cleaned = 0.00144421 Jy ! Component: 200 - total flux cleaned = -0.000448296 Jy ! Total flux subtracted in 200 components = -0.000448296 Jy ! Clean residual min=-0.017515 max=0.015542 Jy/beam ! Clean residual mean=-0.000024 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 4.13582 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 4.13582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116757Jy sigma=2.129380 ! Fit after self-cal, rms=0.111843Jy sigma=2.075093 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9393 x 2.477 at -33.52 degrees (North through East) ! Clean map min=-0.018082 max=3.2368 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111843Jy sigma=2.075093 ! Fit after self-cal, rms=0.063302Jy sigma=1.073524 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063302Jy sigma=1.073524 ! Fit after self-cal, rms=0.062865Jy sigma=1.068343 ! Inverting map and beam ! Estimated beam: bmin=0.9397 mas, bmaj=2.476 mas, bpa=-33.48 degrees ! Estimated noise=0.978004 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241634 Jy ! Component: 100 - total flux cleaned = 0.00324286 Jy ! Component: 150 - total flux cleaned = 0.00369615 Jy ! Component: 200 - total flux cleaned = 0.00428556 Jy ! Total flux subtracted in 200 components = 0.00428557 Jy ! Clean residual min=-0.009345 max=0.006485 Jy/beam ! Clean residual mean=0.000039 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 4.14011 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 108 components and 4.14011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060959Jy sigma=1.033186 ! Fit after self-cal, rms=0.060818Jy sigma=1.030702 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060818Jy sigma=1.030702 ! Fit after self-cal, rms=0.059000Jy sigma=0.998935 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059000Jy sigma=0.998935 ! Fit after self-cal, rms=0.059000Jy sigma=0.998896 ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=2.476 mas, bpa=-33.49 degrees ! Estimated noise=0.977784 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00084421 Jy ! Component: 100 - total flux cleaned = -0.000468123 Jy ! Component: 150 - total flux cleaned = -0.000144711 Jy ! Component: 200 - total flux cleaned = 0.000147561 Jy ! Total flux subtracted in 200 components = 0.000147561 Jy ! Clean residual min=-0.008355 max=0.005877 Jy/beam ! Clean residual mean=0.000038 rms=0.001558 Jy/beam ! Combined flux in latest and established models = 4.14026 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 4.14026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058102Jy sigma=0.983214 ! Fit after self-cal, rms=0.058037Jy sigma=0.982195 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=2.858 mas, bpa=-39.39 degrees ! Estimated noise=1.20645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199544 Jy ! Component: 100 - total flux cleaned = 0.000573218 Jy ! Component: 150 - total flux cleaned = 0.000879363 Jy ! Component: 200 - total flux cleaned = 0.000971088 Jy ! Total flux subtracted in 200 components = 0.000971088 Jy ! Clean residual min=-0.005205 max=0.004945 Jy/beam ! Clean residual mean=0.000024 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 4.14123 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 135 components and 4.14123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057732Jy sigma=0.976847 ! Fit after self-cal, rms=0.057655Jy sigma=0.975702 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7178 mas, bmaj=2.298 mas, bpa=-32.45 degrees ! Estimated noise=1.53787 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.72051 Jy ! Component: 100 - total flux cleaned = 3.46668 Jy ! Component: 150 - total flux cleaned = 3.73385 Jy ! Component: 200 - total flux cleaned = 3.86163 Jy ! Total flux subtracted in 200 components = 3.86163 Jy ! Clean residual min=-0.029843 max=0.048266 Jy/beam ! Clean residual mean=-0.000427 rms=0.009054 Jy/beam ! Combined flux in latest and established models = 3.86163 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 3.86163 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=2.476 mas, bpa=-33.49 degrees ! Estimated noise=0.977784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.129094 Jy ! Component: 100 - total flux cleaned = 0.195165 Jy ! Component: 150 - total flux cleaned = 0.231861 Jy ! Component: 200 - total flux cleaned = 0.253654 Jy ! Total flux subtracted in 200 components = 0.253654 Jy ! Clean residual min=-0.009302 max=0.010038 Jy/beam ! Clean residual mean=-0.000056 rms=0.002578 Jy/beam ! Combined flux in latest and established models = 4.11528 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 66 components and 4.11528 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.291 mas, bmaj=2.858 mas, bpa=-39.39 degrees ! Estimated noise=1.20645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163815 Jy ! Component: 100 - total flux cleaned = 0.0215507 Jy ! Component: 150 - total flux cleaned = 0.0235577 Jy ! Component: 200 - total flux cleaned = 0.0245453 Jy ! Total flux subtracted in 200 components = 0.0245453 Jy ! Clean residual min=-0.005016 max=0.006070 Jy/beam ! Clean residual mean=0.000016 rms=0.001551 Jy/beam ! Combined flux in latest and established models = 4.13982 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 4.13982 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9398 mas, bmaj=2.476 mas, bpa=-33.49 degrees ! Estimated noise=0.977784 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000626697 Jy ! Component: 100 - total flux cleaned = -1.91032e-05 Jy ! Component: 150 - total flux cleaned = 0.000781214 Jy ! Component: 200 - total flux cleaned = 0.0010187 Jy ! Total flux subtracted in 200 components = 0.0010187 Jy ! Clean residual min=-0.007423 max=0.006158 Jy/beam ! Clean residual mean=0.000007 rms=0.001684 Jy/beam ! Combined flux in latest and established models = 4.14084 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 108 components and 4.14084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059660Jy sigma=1.007643 ! Fit after self-cal, rms=0.059171Jy sigma=0.998619 wmodel J0555+3948_X_2006_02_14_yyk\_map.mod ! Writing 108 model components to file: J0555+3948_X_2006_02_14_yyk_map.mod wobs J0555+3948_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0555+3948_X_2006_02_14_yyk_uvs.fits wwins J0555+3948_X_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0555+3948_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00248743 Jy ! Component: 100 - total flux cleaned = -0.00312684 Jy ! Component: 150 - total flux cleaned = -0.00341988 Jy ! Component: 200 - total flux cleaned = -0.00378764 Jy ! Component: 250 - total flux cleaned = -0.00395969 Jy ! Component: 300 - total flux cleaned = -0.00412718 Jy ! Component: 350 - total flux cleaned = -0.00445062 Jy ! Component: 400 - total flux cleaned = -0.00476046 Jy ! Component: 450 - total flux cleaned = -0.00498372 Jy ! Component: 500 - total flux cleaned = -0.00556169 Jy ! Component: 550 - total flux cleaned = -0.00605157 Jy ! Component: 600 - total flux cleaned = -0.00652593 Jy ! Component: 650 - total flux cleaned = -0.00672471 Jy ! Component: 700 - total flux cleaned = -0.00736763 Jy ! Component: 750 - total flux cleaned = -0.00767888 Jy ! Component: 800 - total flux cleaned = -0.007924 Jy ! Component: 850 - total flux cleaned = -0.00834309 Jy ! Component: 900 - total flux cleaned = -0.00857794 Jy ! Component: 950 - total flux cleaned = -0.00875063 Jy ! Component: 1000 - total flux cleaned = -0.00919956 Jy ! Component: 1050 - total flux cleaned = -0.0096918 Jy ! Component: 1100 - total flux cleaned = -0.010012 Jy ! Component: 1150 - total flux cleaned = -0.0103795 Jy ! Component: 1200 - total flux cleaned = -0.0107903 Jy ! Component: 1250 - total flux cleaned = -0.011042 Jy ! Component: 1300 - total flux cleaned = -0.0112909 Jy ! Component: 1350 - total flux cleaned = -0.0119683 Jy ! Component: 1400 - total flux cleaned = -0.0123004 Jy ! Component: 1450 - total flux cleaned = -0.0127197 Jy ! Component: 1500 - total flux cleaned = -0.0132222 Jy ! Component: 1550 - total flux cleaned = -0.0134007 Jy ! Component: 1600 - total flux cleaned = -0.0139281 Jy ! Component: 1650 - total flux cleaned = -0.0142293 Jy ! Component: 1700 - total flux cleaned = -0.0145255 Jy ! Component: 1750 - total flux cleaned = -0.0149009 Jy ! Component: 1800 - total flux cleaned = -0.0151463 Jy ! Component: 1850 - total flux cleaned = -0.015388 Jy ! Component: 1900 - total flux cleaned = -0.0156254 Jy ! Component: 1950 - total flux cleaned = -0.0158582 Jy ! Component: 2000 - total flux cleaned = -0.0160504 Jy ! Total flux subtracted in 2048 components = -0.0162392 Jy ! Clean residual min=-0.002103 max=0.002136 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 4.1246 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 245 components and 4.1246 Jy ![Exited script file: muppet] wmap "J0555+3948_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 2.476 at -33.49 degrees (North through East) ! Clean map min=-0.0061333 max=3.2394 Jy/beam ! Writing clean map to FITS file: J0555+3948_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.23942 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000708022 device "J0555+3948_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0655693 0.0655693 0.131139 0.262277 0.524554 1.04911 2.09822 4.19644 8.39287 16.7857 33.5715 67.143 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.239 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9398 x 2.476 at -33.49 degrees (North through East) ! Clean map min=-0.0061333 max=3.2394 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0555+3948_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0555+3948_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0555+3948_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:31:22 2006