! Started logfile: J0555+3948_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:30:34 2006 obs J0555+3948_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0555+3948_S_2006_02_23_yyk_uva.fits ! AN table 1: 424 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.995597 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2429 lines of history. ! ! Reading 75984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0555+3948_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.34133 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.582 mas, bmaj=8.722 mas, bpa=-32.58 degrees ! Estimated noise=1.43543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.74532 Jy ! Component: 100 - total flux cleaned = 3.20712 Jy ! Total flux subtracted in 100 components = 3.20712 Jy ! Clean residual min=-0.080805 max=0.130135 Jy/beam ! Clean residual mean=-0.000248 rms=0.026434 Jy/beam ! Combined flux in latest and established models = 3.20712 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 3.20712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544065Jy sigma=9.433180 ! Fit after self-cal, rms=0.543776Jy sigma=9.424386 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=8.888 mas, bpa=-32.85 degrees ! Estimated noise=0.925149 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.152417 Jy ! Component: 100 - total flux cleaned = 0.219634 Jy ! Component: 150 - total flux cleaned = 0.232864 Jy ! Component: 200 - total flux cleaned = 0.2417 Jy ! Total flux subtracted in 200 components = 0.2417 Jy ! Clean residual min=-0.067235 max=0.089580 Jy/beam ! Clean residual mean=0.000398 rms=0.021584 Jy/beam ! Combined flux in latest and established models = 3.44882 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 37 components and 3.44882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.490384Jy sigma=8.724383 ! Fit after self-cal, rms=0.490335Jy sigma=8.724336 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 8.888 at -32.85 degrees (North through East) ! Clean map min=-0.064343 max=3.1859 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00602 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 0.99 KP 0.96 ! LA 1.22 MK 0.91 NL 0.94 OV 0.97 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.993277 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.01 KP 0.98 ! LA 1.18 MK 1.00 NL 0.95 OV 0.99 ! PT 1.01 SC 0.99 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.972434 ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 0.97 HN 1.01 KP 0.96 ! LA 0.92 MK 1.08 NL 1.03 OV 0.99 ! PT 1.06 SC 1.02 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06228 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.95 KP 0.88 ! LA 0.78 MK 1.08 NL 0.96 OV 0.85 ! PT 0.93 SC 1.10 ! ! ! Fit before self-cal, rms=0.490335Jy sigma=8.724336 ! Fit after self-cal, rms=0.308916Jy sigma=5.098106 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.308916Jy sigma=5.098106 ! Fit after self-cal, rms=0.308943Jy sigma=5.098096 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.362 mas, bmaj=9.026 mas, bpa=-33.07 degrees ! Estimated noise=0.928015 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130657 Jy ! Component: 100 - total flux cleaned = 0.0147083 Jy ! Component: 150 - total flux cleaned = 0.0165756 Jy ! Component: 200 - total flux cleaned = 0.0156854 Jy ! Total flux subtracted in 200 components = 0.0156854 Jy ! Clean residual min=-0.020136 max=0.020276 Jy/beam ! Clean residual mean=0.000096 rms=0.005086 Jy/beam ! Combined flux in latest and established models = 3.4645 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 3.4645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302826Jy sigma=5.017857 ! Fit after self-cal, rms=0.302764Jy sigma=5.017799 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302764Jy sigma=5.017799 ! Fit after self-cal, rms=0.239566Jy sigma=4.219734 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134239 Jy ! Component: 100 - total flux cleaned = -0.000266636 Jy ! Component: 150 - total flux cleaned = -0.000840654 Jy ! Component: 200 - total flux cleaned = -0.00140474 Jy ! Total flux subtracted in 200 components = -0.00140474 Jy ! Clean residual min=-0.018030 max=0.019279 Jy/beam ! Clean residual mean=0.000089 rms=0.004936 Jy/beam ! Combined flux in latest and established models = 3.4631 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 3.4631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238401Jy sigma=4.208223 ! Fit after self-cal, rms=0.236639Jy sigma=4.187075 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.362 x 9.026 at -33.07 degrees (North through East) ! Clean map min=-0.017207 max=3.2187 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236639Jy sigma=4.187075 ! Fit after self-cal, rms=0.085280Jy sigma=1.299685 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085280Jy sigma=1.299685 ! Fit after self-cal, rms=0.084994Jy sigma=1.295779 ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=9.048 mas, bpa=-33.15 degrees ! Estimated noise=0.925473 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0083055 Jy ! Component: 100 - total flux cleaned = -0.00906592 Jy ! Component: 150 - total flux cleaned = -0.0093961 Jy ! Component: 200 - total flux cleaned = -0.00992696 Jy ! Total flux subtracted in 200 components = -0.00992696 Jy ! Clean residual min=-0.010817 max=0.010885 Jy/beam ! Clean residual mean=0.000045 rms=0.003107 Jy/beam ! Combined flux in latest and established models = 3.45317 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 3.45317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081727Jy sigma=1.240084 ! Fit after self-cal, rms=0.081706Jy sigma=1.239697 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081706Jy sigma=1.239697 ! Fit after self-cal, rms=0.075820Jy sigma=1.106253 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075820Jy sigma=1.106253 ! Fit after self-cal, rms=0.075821Jy sigma=1.106216 ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.059 mas, bpa=-33.19 degrees ! Estimated noise=0.925464 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00500938 Jy ! Component: 100 - total flux cleaned = -0.0055677 Jy ! Component: 150 - total flux cleaned = -0.00629387 Jy ! Component: 200 - total flux cleaned = -0.00671538 Jy ! Total flux subtracted in 200 components = -0.00671538 Jy ! Clean residual min=-0.009428 max=0.008818 Jy/beam ! Clean residual mean=0.000036 rms=0.002651 Jy/beam ! Combined flux in latest and established models = 3.44645 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 3.44645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073823Jy sigma=1.071102 ! Fit after self-cal, rms=0.073824Jy sigma=1.071071 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.019 mas, bmaj=9.784 mas, bpa=-29.23 degrees ! Estimated noise=1.13526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000702926 Jy ! Component: 100 - total flux cleaned = 0.000508512 Jy ! Component: 150 - total flux cleaned = 0.000514982 Jy ! Component: 200 - total flux cleaned = 0.000513519 Jy ! Total flux subtracted in 200 components = 0.000513519 Jy ! Clean residual min=-0.009451 max=0.008549 Jy/beam ! Clean residual mean=0.000041 rms=0.003180 Jy/beam ! Combined flux in latest and established models = 3.44697 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 88 components and 3.44697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073746Jy sigma=1.066268 ! Fit after self-cal, rms=0.073747Jy sigma=1.066250 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.604 mas, bmaj=8.758 mas, bpa=-32.79 degrees ! Estimated noise=1.42732 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.73377 Jy ! Component: 100 - total flux cleaned = 3.16287 Jy ! Component: 150 - total flux cleaned = 3.311 Jy ! Component: 200 - total flux cleaned = 3.36835 Jy ! Total flux subtracted in 200 components = 3.36835 Jy ! Clean residual min=-0.018596 max=0.024098 Jy/beam ! Clean residual mean=-0.000052 rms=0.005282 Jy/beam ! Combined flux in latest and established models = 3.36835 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 3.36835 Jy ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.059 mas, bpa=-33.19 degrees ! Estimated noise=0.925464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379987 Jy ! Component: 100 - total flux cleaned = 0.0591591 Jy ! Component: 150 - total flux cleaned = 0.0676717 Jy ! Component: 200 - total flux cleaned = 0.070721 Jy ! Total flux subtracted in 200 components = 0.070721 Jy ! Clean residual min=-0.009685 max=0.014785 Jy/beam ! Clean residual mean=0.000021 rms=0.003088 Jy/beam ! Combined flux in latest and established models = 3.43907 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 49 components and 3.43907 Jy ! Inverting map ! Added new window around map position (0.5, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682429 Jy ! Component: 100 - total flux cleaned = 0.0049851 Jy ! Component: 150 - total flux cleaned = 0.00501908 Jy ! Component: 200 - total flux cleaned = 0.00504759 Jy ! Total flux subtracted in 200 components = 0.00504759 Jy ! Clean residual min=-0.008187 max=0.008421 Jy/beam ! Clean residual mean=0.000015 rms=0.002246 Jy/beam ! Combined flux in latest and established models = 3.44412 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 72 components and 3.44412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.019 mas, bmaj=9.784 mas, bpa=-29.23 degrees ! Estimated noise=1.13526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00292127 Jy ! Component: 100 - total flux cleaned = -0.00347749 Jy ! Component: 150 - total flux cleaned = -0.00410238 Jy ! Component: 200 - total flux cleaned = -0.00462207 Jy ! Total flux subtracted in 200 components = -0.00462207 Jy ! Clean residual min=-0.007310 max=0.006543 Jy/beam ! Clean residual mean=0.000008 rms=0.002292 Jy/beam ! Combined flux in latest and established models = 3.4395 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 102 components and 3.4395 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=9.059 mas, bpa=-33.19 degrees ! Estimated noise=0.925464 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131994 Jy ! Component: 100 - total flux cleaned = 0.00182458 Jy ! Component: 150 - total flux cleaned = 0.00158465 Jy ! Component: 200 - total flux cleaned = 0.00179764 Jy ! Total flux subtracted in 200 components = 0.00179764 Jy ! Clean residual min=-0.007028 max=0.006680 Jy/beam ! Clean residual mean=0.000013 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 3.4413 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 116 components and 3.4413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071430Jy sigma=1.015259 ! Fit after self-cal, rms=0.071415Jy sigma=1.014850 wmodel J0555+3948_S_2006_02_23_yyk\_map.mod ! Writing 116 model components to file: J0555+3948_S_2006_02_23_yyk_map.mod wobs J0555+3948_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0555+3948_S_2006_02_23_yyk_uvs.fits wwins J0555+3948_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J0555+3948_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00166408 Jy ! Component: 100 - total flux cleaned = -0.00289818 Jy ! Component: 150 - total flux cleaned = -0.00351376 Jy ! Component: 200 - total flux cleaned = -0.00418175 Jy ! Component: 250 - total flux cleaned = -0.0049058 Jy ! Component: 300 - total flux cleaned = -0.00550909 Jy ! Component: 350 - total flux cleaned = -0.0062429 Jy ! Component: 400 - total flux cleaned = -0.00702531 Jy ! Component: 450 - total flux cleaned = -0.00778036 Jy ! Component: 500 - total flux cleaned = -0.00865206 Jy ! Component: 550 - total flux cleaned = -0.00921269 Jy ! Component: 600 - total flux cleaned = -0.00968698 Jy ! Component: 650 - total flux cleaned = -0.010278 Jy ! Component: 700 - total flux cleaned = -0.0105342 Jy ! Component: 750 - total flux cleaned = -0.0111579 Jy ! Component: 800 - total flux cleaned = -0.0117011 Jy ! Component: 850 - total flux cleaned = -0.0121107 Jy ! Component: 900 - total flux cleaned = -0.0123981 Jy ! Component: 950 - total flux cleaned = -0.0129022 Jy ! Component: 1000 - total flux cleaned = -0.0132301 Jy ! Component: 1050 - total flux cleaned = -0.0136027 Jy ! Component: 1100 - total flux cleaned = -0.013758 Jy ! Component: 1150 - total flux cleaned = -0.0140133 Jy ! Component: 1200 - total flux cleaned = -0.0144121 Jy ! Component: 1250 - total flux cleaned = -0.0146547 Jy ! Component: 1300 - total flux cleaned = -0.0149405 Jy ! Component: 1350 - total flux cleaned = -0.0152201 Jy ! Component: 1400 - total flux cleaned = -0.0154026 Jy ! Component: 1450 - total flux cleaned = -0.0157132 Jy ! Component: 1500 - total flux cleaned = -0.0157568 Jy ! Component: 1550 - total flux cleaned = -0.016056 Jy ! Component: 1600 - total flux cleaned = -0.0163491 Jy ! Component: 1650 - total flux cleaned = -0.016391 Jy ! Component: 1700 - total flux cleaned = -0.0166748 Jy ! Component: 1750 - total flux cleaned = -0.0168339 Jy ! Component: 1800 - total flux cleaned = -0.0170293 Jy ! Component: 1850 - total flux cleaned = -0.0172968 Jy ! Component: 1900 - total flux cleaned = -0.0174099 Jy ! Component: 1950 - total flux cleaned = -0.0175937 Jy ! Component: 2000 - total flux cleaned = -0.0177023 Jy ! Total flux subtracted in 2048 components = -0.0177734 Jy ! Clean residual min=-0.001947 max=0.001834 Jy/beam ! Clean residual mean=0.000003 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 3.42352 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 245 components and 3.42352 Jy ![Exited script file: muppet] wmap "J0555+3948_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 9.059 at -33.19 degrees (North through East) ! Clean map min=-0.007561 max=3.2205 Jy/beam ! Writing clean map to FITS file: J0555+3948_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.22051 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000703684 device "J0555+3948_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0655502 0.0655502 0.1311 0.262201 0.524402 1.0488 2.09761 4.19521 8.39042 16.7808 33.5617 67.1234 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.22 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.369 x 9.059 at -33.19 degrees (North through East) ! Clean map min=-0.007561 max=3.2205 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0555+3948_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0555+3948_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0555+3948_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:30:58 2006