! Started logfile: J0555+3948_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:30:10 2006 obs J0555+3948_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0555+3948_S_2006_02_16_yyk_uva.fits ! AN table 1: 439 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.96983 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 76636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0555+3948_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.19674 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=8.797 mas, bpa=-34.66 degrees ! Estimated noise=1.6264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.64271 Jy ! Component: 100 - total flux cleaned = 3.0897 Jy ! Total flux subtracted in 100 components = 3.0897 Jy ! Clean residual min=-0.119312 max=0.146554 Jy/beam ! Clean residual mean=-0.000033 rms=0.038839 Jy/beam ! Combined flux in latest and established models = 3.0897 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 3.0897 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.598284Jy sigma=10.273558 ! Fit after self-cal, rms=0.597959Jy sigma=10.266147 ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=8.797 mas, bpa=-34.66 degrees ! Estimated noise=1.6264 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.46 mas, bmaj=9.026 mas, bpa=-34.85 degrees ! Estimated noise=0.970178 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.224231 Jy ! Component: 100 - total flux cleaned = 0.333553 Jy ! Component: 150 - total flux cleaned = 0.363554 Jy ! Component: 200 - total flux cleaned = 0.378647 Jy ! Total flux subtracted in 200 components = 0.378647 Jy ! Clean residual min=-0.078623 max=0.091465 Jy/beam ! Clean residual mean=0.000290 rms=0.025344 Jy/beam ! Combined flux in latest and established models = 3.46835 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 3.46835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.523830Jy sigma=8.844846 ! Fit after self-cal, rms=0.523923Jy sigma=8.845244 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.46 x 9.026 at -34.85 degrees (North through East) ! Clean map min=-0.075726 max=3.0153 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01349 ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.94 HN 0.96 KP 0.95 ! LA 1.19 MK 0.91 NL 1.05 OV 0.97 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.985966 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.98 KP 0.97 ! LA 1.15 MK 1.00 NL 1.13 OV 0.97 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.974986 ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 0.99 KP 0.96 ! LA 0.89 MK 1.10 NL 1.18 OV 0.99 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.04428 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.94 KP 0.87 ! LA 0.76 MK 1.09 NL 1.13 OV 0.84 ! PT 0.92 SC 1.09 ! ! ! Fit before self-cal, rms=0.523923Jy sigma=8.845244 ! Fit after self-cal, rms=0.324829Jy sigma=5.328130 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324829Jy sigma=5.328130 ! Fit after self-cal, rms=0.325038Jy sigma=5.329207 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.578 mas, bmaj=8.986 mas, bpa=-34.51 degrees ! Estimated noise=0.971792 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0438376 Jy ! Component: 100 - total flux cleaned = -0.0487799 Jy ! Component: 150 - total flux cleaned = -0.0509269 Jy ! Component: 200 - total flux cleaned = -0.0533494 Jy ! Total flux subtracted in 200 components = -0.0533494 Jy ! Clean residual min=-0.039345 max=0.027061 Jy/beam ! Clean residual mean=0.000058 rms=0.008616 Jy/beam ! Combined flux in latest and established models = 3.415 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 45 components and 3.415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309335Jy sigma=5.075381 ! Fit after self-cal, rms=0.309548Jy sigma=5.076687 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309548Jy sigma=5.076687 ! Fit after self-cal, rms=0.238975Jy sigma=4.073169 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000480219 Jy ! Component: 100 - total flux cleaned = 0.000459066 Jy ! Component: 150 - total flux cleaned = 0.000946514 Jy ! Component: 200 - total flux cleaned = 0.00183811 Jy ! Total flux subtracted in 200 components = 0.00183811 Jy ! Clean residual min=-0.035794 max=0.029210 Jy/beam ! Clean residual mean=0.000078 rms=0.008506 Jy/beam ! Combined flux in latest and established models = 3.41684 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 3.41684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236450Jy sigma=4.036696 ! Fit after self-cal, rms=0.235090Jy sigma=4.017482 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.578 x 8.986 at -34.51 degrees (North through East) ! Clean map min=-0.034372 max=3.0665 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235090Jy sigma=4.017482 ! Fit after self-cal, rms=0.150671Jy sigma=2.181708 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150671Jy sigma=2.181708 ! Fit after self-cal, rms=0.150588Jy sigma=2.180190 ! Inverting map and beam ! Estimated beam: bmin=3.598 mas, bmaj=8.956 mas, bpa=-34.32 degrees ! Estimated noise=0.970471 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0382765 Jy ! Component: 100 - total flux cleaned = -0.039917 Jy ! Component: 150 - total flux cleaned = -0.0399399 Jy ! Component: 200 - total flux cleaned = -0.0386834 Jy ! Total flux subtracted in 200 components = -0.0386834 Jy ! Clean residual min=-0.024425 max=0.015572 Jy/beam ! Clean residual mean=0.000054 rms=0.005544 Jy/beam ! Combined flux in latest and established models = 3.37816 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 3.37815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138293Jy sigma=1.962145 ! Fit after self-cal, rms=0.138290Jy sigma=1.962025 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138290Jy sigma=1.962025 ! Fit after self-cal, rms=0.129617Jy sigma=1.683243 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129617Jy sigma=1.683243 ! Fit after self-cal, rms=0.129619Jy sigma=1.683237 ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.949 mas, bpa=-34.31 degrees ! Estimated noise=0.969459 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0258144 Jy ! Component: 100 - total flux cleaned = -0.0286382 Jy ! Component: 150 - total flux cleaned = -0.0278934 Jy ! Component: 200 - total flux cleaned = -0.0272775 Jy ! Total flux subtracted in 200 components = -0.0272775 Jy ! Clean residual min=-0.017368 max=0.011812 Jy/beam ! Clean residual mean=0.000046 rms=0.004066 Jy/beam ! Combined flux in latest and established models = 3.35088 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 72 components and 3.35088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123379Jy sigma=1.556959 ! Fit after self-cal, rms=0.123380Jy sigma=1.556945 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.412 mas, bmaj=9.889 mas, bpa=-23.21 degrees ! Estimated noise=1.16598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00514038 Jy ! Component: 100 - total flux cleaned = 0.00599408 Jy ! Component: 150 - total flux cleaned = 0.00631649 Jy ! Component: 200 - total flux cleaned = 0.00671573 Jy ! Total flux subtracted in 200 components = 0.00671573 Jy ! Clean residual min=-0.017798 max=0.012046 Jy/beam ! Clean residual mean=0.000094 rms=0.004647 Jy/beam ! Combined flux in latest and established models = 3.35759 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 3.35759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123539Jy sigma=1.560253 ! Fit after self-cal, rms=0.123538Jy sigma=1.560228 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=8.722 mas, bpa=-34.62 degrees ! Estimated noise=1.63173 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.65664 Jy ! Component: 100 - total flux cleaned = 3.04537 Jy ! Component: 150 - total flux cleaned = 3.17164 Jy ! Component: 200 - total flux cleaned = 3.23547 Jy ! Total flux subtracted in 200 components = 3.23547 Jy ! Clean residual min=-0.027543 max=0.026075 Jy/beam ! Clean residual mean=0.000009 rms=0.007589 Jy/beam ! Combined flux in latest and established models = 3.23547 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 3.23547 Jy ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.949 mas, bpa=-34.31 degrees ! Estimated noise=0.969459 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.045368 Jy ! Component: 100 - total flux cleaned = 0.0718873 Jy ! Component: 150 - total flux cleaned = 0.0840775 Jy ! Component: 200 - total flux cleaned = 0.0880379 Jy ! Total flux subtracted in 200 components = 0.0880379 Jy ! Clean residual min=-0.016962 max=0.016883 Jy/beam ! Clean residual mean=0.000026 rms=0.004591 Jy/beam ! Combined flux in latest and established models = 3.32351 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 45 components and 3.32351 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.412 mas, bmaj=9.889 mas, bpa=-23.21 degrees ! Estimated noise=1.16598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174319 Jy ! Component: 100 - total flux cleaned = 0.0227333 Jy ! Component: 150 - total flux cleaned = 0.0239165 Jy ! Component: 200 - total flux cleaned = 0.0252273 Jy ! Total flux subtracted in 200 components = 0.0252273 Jy ! Clean residual min=-0.017270 max=0.013333 Jy/beam ! Clean residual mean=0.000073 rms=0.004698 Jy/beam ! Combined flux in latest and established models = 3.34874 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 3.34874 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.603 mas, bmaj=8.949 mas, bpa=-34.31 degrees ! Estimated noise=0.969459 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00559266 Jy ! Component: 100 - total flux cleaned = -0.00458134 Jy ! Component: 150 - total flux cleaned = -0.00428245 Jy ! Component: 200 - total flux cleaned = -0.00345713 Jy ! Total flux subtracted in 200 components = -0.00345713 Jy ! Clean residual min=-0.016299 max=0.013679 Jy/beam ! Clean residual mean=0.000045 rms=0.004154 Jy/beam ! Combined flux in latest and established models = 3.34528 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 64 components and 3.34528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125750Jy sigma=1.581242 ! Fit after self-cal, rms=0.125744Jy sigma=1.581121 wmodel J0555+3948_S_2006_02_16_yyk\_map.mod ! Writing 64 model components to file: J0555+3948_S_2006_02_16_yyk_map.mod wobs J0555+3948_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0555+3948_S_2006_02_16_yyk_uvs.fits wwins J0555+3948_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J0555+3948_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00485032 Jy ! Component: 100 - total flux cleaned = -0.00634781 Jy ! Component: 150 - total flux cleaned = -0.00842288 Jy ! Component: 200 - total flux cleaned = -0.00971635 Jy ! Component: 250 - total flux cleaned = -0.0113441 Jy ! Component: 300 - total flux cleaned = -0.0125019 Jy ! Component: 350 - total flux cleaned = -0.0137971 Jy ! Component: 400 - total flux cleaned = -0.0155664 Jy ! Component: 450 - total flux cleaned = -0.016753 Jy ! Component: 500 - total flux cleaned = -0.017896 Jy ! Component: 550 - total flux cleaned = -0.0191555 Jy ! Component: 600 - total flux cleaned = -0.0200717 Jy ! Component: 650 - total flux cleaned = -0.0209574 Jy ! Component: 700 - total flux cleaned = -0.0216733 Jy ! Component: 750 - total flux cleaned = -0.0219521 Jy ! Component: 800 - total flux cleaned = -0.0227577 Jy ! Component: 850 - total flux cleaned = -0.0231463 Jy ! Component: 900 - total flux cleaned = -0.0237777 Jy ! Component: 950 - total flux cleaned = -0.0240233 Jy ! Component: 1000 - total flux cleaned = -0.0247432 Jy ! Component: 1050 - total flux cleaned = -0.0248602 Jy ! Component: 1100 - total flux cleaned = -0.0252046 Jy ! Component: 1150 - total flux cleaned = -0.0255376 Jy ! Component: 1200 - total flux cleaned = -0.0257558 Jy ! Component: 1250 - total flux cleaned = -0.0261793 Jy ! Component: 1300 - total flux cleaned = -0.0262828 Jy ! Component: 1350 - total flux cleaned = -0.0268875 Jy ! Component: 1400 - total flux cleaned = -0.0270831 Jy ! Component: 1450 - total flux cleaned = -0.0273708 Jy ! Component: 1500 - total flux cleaned = -0.0276533 Jy ! Component: 1550 - total flux cleaned = -0.0281118 Jy ! Component: 1600 - total flux cleaned = -0.0281125 Jy ! Component: 1650 - total flux cleaned = -0.028377 Jy ! Component: 1700 - total flux cleaned = -0.0284643 Jy ! Component: 1750 - total flux cleaned = -0.0287179 Jy ! Component: 1800 - total flux cleaned = -0.0288011 Jy ! Component: 1850 - total flux cleaned = -0.0289622 Jy ! Component: 1900 - total flux cleaned = -0.028883 Jy ! Component: 1950 - total flux cleaned = -0.0291957 Jy ! Component: 2000 - total flux cleaned = -0.0293497 Jy ! Total flux subtracted in 2048 components = -0.0295756 Jy ! Clean residual min=-0.004033 max=0.004734 Jy/beam ! Clean residual mean=-0.000013 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 3.3157 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 213 components and 3.3157 Jy ![Exited script file: muppet] wmap "J0555+3948_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 8.949 at -34.31 degrees (North through East) ! Clean map min=-0.011672 max=3.088 Jy/beam ! Writing clean map to FITS file: J0555+3948_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.08797 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00161898 device "J0555+3948_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.157286 0.157286 0.314572 0.629143 1.25829 2.51657 5.03315 10.0663 20.1326 40.2652 80.5304 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0048 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.087 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.603 x 8.949 at -34.31 degrees (North through East) ! Clean map min=-0.011672 max=3.088 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0555+3948_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0555+3948_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0555+3948_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:30:34 2006