! Started logfile: J0555+3948_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:29:46 2006 obs J0555+3948_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0555+3948_S_2006_02_14_yyk_uva.fits ! AN table 1: 435 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.936194 visibilities/baseline/integration-bin. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 73304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0555+3948_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 3.37637 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.587 mas, bmaj=8.575 mas, bpa=-32.65 degrees ! Estimated noise=1.52046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.77656 Jy ! Component: 100 - total flux cleaned = 3.23565 Jy ! Total flux subtracted in 100 components = 3.23565 Jy ! Clean residual min=-0.082202 max=0.130336 Jy/beam ! Clean residual mean=-0.000324 rms=0.026450 Jy/beam ! Combined flux in latest and established models = 3.23565 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 3.23565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544076Jy sigma=9.970103 ! Fit after self-cal, rms=0.543753Jy sigma=9.958977 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=8.648 mas, bpa=-32.76 degrees ! Estimated noise=0.945242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.137944 Jy ! Component: 100 - total flux cleaned = 0.195065 Jy ! Component: 150 - total flux cleaned = 0.209318 Jy ! Component: 200 - total flux cleaned = 0.220844 Jy ! Total flux subtracted in 200 components = 0.220844 Jy ! Clean residual min=-0.072072 max=0.085005 Jy/beam ! Clean residual mean=0.000303 rms=0.022689 Jy/beam ! Combined flux in latest and established models = 3.4565 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 3.4565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.498148Jy sigma=9.316624 ! Fit after self-cal, rms=0.498184Jy sigma=9.316518 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.29 x 8.648 at -32.76 degrees (North through East) ! Clean map min=-0.069278 max=3.1908 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.00723 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.99 KP 0.96 ! LA 1.21 MK 0.91 NL 0.94 OV 0.99 ! PT 1.06 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00033 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 0.98 ! LA 1.17 MK 0.99 NL 0.95 OV 1.00 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.970446 ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 0.97 HN 1.01 KP 0.96 ! LA 0.92 MK 1.08 NL 1.02 OV 1.01 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.07219 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 HN 0.93 KP 0.87 ! LA 0.78 MK 1.09 NL 0.94 OV 0.83 ! PT 0.92 SC 1.08 ! ! ! Fit before self-cal, rms=0.498184Jy sigma=9.316518 ! Fit after self-cal, rms=0.306396Jy sigma=5.546207 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306396Jy sigma=5.546207 ! Fit after self-cal, rms=0.306388Jy sigma=5.546198 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.347 mas, bmaj=8.788 mas, bpa=-32.9 degrees ! Estimated noise=0.952988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0345911 Jy ! Component: 100 - total flux cleaned = 0.0347436 Jy ! Component: 150 - total flux cleaned = 0.0330769 Jy ! Component: 200 - total flux cleaned = 0.0317409 Jy ! Total flux subtracted in 200 components = 0.0317409 Jy ! Clean residual min=-0.020153 max=0.020342 Jy/beam ! Clean residual mean=0.000090 rms=0.005382 Jy/beam ! Combined flux in latest and established models = 3.48824 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 57 components and 3.48824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293065Jy sigma=5.391342 ! Fit after self-cal, rms=0.293073Jy sigma=5.391305 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293073Jy sigma=5.391305 ! Fit after self-cal, rms=0.260530Jy sigma=4.795213 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123421 Jy ! Component: 100 - total flux cleaned = 3.4136e-05 Jy ! Component: 150 - total flux cleaned = -0.000593057 Jy ! Component: 200 - total flux cleaned = -0.0011622 Jy ! Total flux subtracted in 200 components = -0.0011622 Jy ! Clean residual min=-0.018624 max=0.019224 Jy/beam ! Clean residual mean=0.000077 rms=0.005295 Jy/beam ! Combined flux in latest and established models = 3.48708 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 3.48708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258742Jy sigma=4.780491 ! Fit after self-cal, rms=0.258217Jy sigma=4.772266 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.347 x 8.788 at -32.9 degrees (North through East) ! Clean map min=-0.01765 max=3.2354 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.258217Jy sigma=4.772266 ! Fit after self-cal, rms=0.073335Jy sigma=1.311317 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073335Jy sigma=1.311317 ! Fit after self-cal, rms=0.073260Jy sigma=1.309898 ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=8.821 mas, bpa=-32.98 degrees ! Estimated noise=0.950377 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00838181 Jy ! Component: 100 - total flux cleaned = -0.010758 Jy ! Component: 150 - total flux cleaned = -0.0121743 Jy ! Component: 200 - total flux cleaned = -0.0127553 Jy ! Total flux subtracted in 200 components = -0.0127553 Jy ! Clean residual min=-0.011952 max=0.009918 Jy/beam ! Clean residual mean=0.000034 rms=0.003401 Jy/beam ! Combined flux in latest and established models = 3.47432 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 74 components and 3.47432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067962Jy sigma=1.225467 ! Fit after self-cal, rms=0.067957Jy sigma=1.225315 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067957Jy sigma=1.225315 ! Fit after self-cal, rms=0.064140Jy sigma=1.135731 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064140Jy sigma=1.135731 ! Fit after self-cal, rms=0.064139Jy sigma=1.135720 ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=8.835 mas, bpa=-33 degrees ! Estimated noise=0.950728 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00517795 Jy ! Component: 100 - total flux cleaned = -0.00688144 Jy ! Component: 150 - total flux cleaned = -0.00743463 Jy ! Component: 200 - total flux cleaned = -0.00791616 Jy ! Total flux subtracted in 200 components = -0.00791616 Jy ! Clean residual min=-0.010335 max=0.007750 Jy/beam ! Clean residual mean=0.000025 rms=0.002804 Jy/beam ! Combined flux in latest and established models = 3.46641 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 3.46641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061269Jy sigma=1.087644 ! Fit after self-cal, rms=0.061269Jy sigma=1.087628 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=9.665 mas, bpa=-27.84 degrees ! Estimated noise=1.1741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241584 Jy ! Component: 100 - total flux cleaned = 0.000235255 Jy ! Component: 150 - total flux cleaned = 0.000234735 Jy ! Component: 200 - total flux cleaned = 0.000360119 Jy ! Total flux subtracted in 200 components = 0.00036012 Jy ! Clean residual min=-0.011740 max=0.008653 Jy/beam ! Clean residual mean=0.000025 rms=0.003545 Jy/beam ! Combined flux in latest and established models = 3.46677 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 89 components and 3.46677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061386Jy sigma=1.085796 ! Fit after self-cal, rms=0.061383Jy sigma=1.085749 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.615 mas, bmaj=8.6 mas, bpa=-32.85 degrees ! Estimated noise=1.5099 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 2.7598 Jy ! Component: 100 - total flux cleaned = 3.17819 Jy ! Component: 150 - total flux cleaned = 3.31968 Jy ! Component: 200 - total flux cleaned = 3.37571 Jy ! Total flux subtracted in 200 components = 3.37571 Jy ! Clean residual min=-0.020345 max=0.026475 Jy/beam ! Clean residual mean=-0.000061 rms=0.005826 Jy/beam ! Combined flux in latest and established models = 3.37571 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 3.37571 Jy ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=8.835 mas, bpa=-33 degrees ! Estimated noise=0.950728 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425235 Jy ! Component: 100 - total flux cleaned = 0.0681203 Jy ! Component: 150 - total flux cleaned = 0.0767832 Jy ! Component: 200 - total flux cleaned = 0.078447 Jy ! Total flux subtracted in 200 components = 0.078447 Jy ! Clean residual min=-0.010370 max=0.013408 Jy/beam ! Clean residual mean=-0.000008 rms=0.002924 Jy/beam ! Combined flux in latest and established models = 3.45416 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 46 components and 3.45416 Jy ! Inverting map ! Added new window around map position (8.5, -5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541698 Jy ! Component: 100 - total flux cleaned = 0.0068067 Jy ! Component: 150 - total flux cleaned = 0.00719421 Jy ! Component: 200 - total flux cleaned = 0.00753713 Jy ! Total flux subtracted in 200 components = 0.00753713 Jy ! Clean residual min=-0.008191 max=0.007130 Jy/beam ! Clean residual mean=-0.000001 rms=0.002066 Jy/beam ! Combined flux in latest and established models = 3.4617 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 3.4617 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=9.665 mas, bpa=-27.84 degrees ! Estimated noise=1.1741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190825 Jy ! Component: 100 - total flux cleaned = 0.00287375 Jy ! Component: 150 - total flux cleaned = 0.00320832 Jy ! Component: 200 - total flux cleaned = 0.00335238 Jy ! Total flux subtracted in 200 components = 0.00335238 Jy ! Clean residual min=-0.008101 max=0.005782 Jy/beam ! Clean residual mean=0.000002 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 3.46505 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 97 components and 3.46505 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=8.835 mas, bpa=-33 degrees ! Estimated noise=0.950728 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00234478 Jy ! Component: 100 - total flux cleaned = -0.00209429 Jy ! Component: 150 - total flux cleaned = -0.00185829 Jy ! Component: 200 - total flux cleaned = -0.00121853 Jy ! Total flux subtracted in 200 components = -0.00121853 Jy ! Clean residual min=-0.006965 max=0.005238 Jy/beam ! Clean residual mean=-0.000001 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 3.46383 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 3.46383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056855Jy sigma=0.994883 ! Fit after self-cal, rms=0.056784Jy sigma=0.993906 wmodel J0555+3948_S_2006_02_14_yyk\_map.mod ! Writing 115 model components to file: J0555+3948_S_2006_02_14_yyk_map.mod wobs J0555+3948_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0555+3948_S_2006_02_14_yyk_uvs.fits wwins J0555+3948_S_2006_02_14_yyk\_map.win ! wwins: Wrote 3 windows to J0555+3948_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00288776 Jy ! Component: 100 - total flux cleaned = -0.00413825 Jy ! Component: 150 - total flux cleaned = -0.00439077 Jy ! Component: 200 - total flux cleaned = -0.00511504 Jy ! Component: 250 - total flux cleaned = -0.00572242 Jy ! Component: 300 - total flux cleaned = -0.00615547 Jy ! Component: 350 - total flux cleaned = -0.00656955 Jy ! Component: 400 - total flux cleaned = -0.00676758 Jy ! Component: 450 - total flux cleaned = -0.00708209 Jy ! Component: 500 - total flux cleaned = -0.00751051 Jy ! Component: 550 - total flux cleaned = -0.00810122 Jy ! Component: 600 - total flux cleaned = -0.00872732 Jy ! Component: 650 - total flux cleaned = -0.00911348 Jy ! Component: 700 - total flux cleaned = -0.00948956 Jy ! Component: 750 - total flux cleaned = -0.00980201 Jy ! Component: 800 - total flux cleaned = -0.0102074 Jy ! Component: 850 - total flux cleaned = -0.0103549 Jy ! Component: 900 - total flux cleaned = -0.0106438 Jy ! Component: 950 - total flux cleaned = -0.0108779 Jy ! Component: 1000 - total flux cleaned = -0.0108781 Jy ! Component: 1050 - total flux cleaned = -0.0109676 Jy ! Component: 1100 - total flux cleaned = -0.0111858 Jy ! Component: 1150 - total flux cleaned = -0.0113993 Jy ! Component: 1200 - total flux cleaned = -0.011567 Jy ! Component: 1250 - total flux cleaned = -0.0117737 Jy ! Component: 1300 - total flux cleaned = -0.0120158 Jy ! Component: 1350 - total flux cleaned = -0.0120962 Jy ! Component: 1400 - total flux cleaned = -0.012407 Jy ! Component: 1450 - total flux cleaned = -0.0127504 Jy ! Component: 1500 - total flux cleaned = -0.0129382 Jy ! Component: 1550 - total flux cleaned = -0.0132314 Jy ! Component: 1600 - total flux cleaned = -0.0134833 Jy ! Component: 1650 - total flux cleaned = -0.0137661 Jy ! Component: 1700 - total flux cleaned = -0.0139051 Jy ! Component: 1750 - total flux cleaned = -0.0141105 Jy ! Component: 1800 - total flux cleaned = -0.0143461 Jy ! Component: 1850 - total flux cleaned = -0.0145776 Jy ! Component: 1900 - total flux cleaned = -0.0148049 Jy ! Component: 1950 - total flux cleaned = -0.0150599 Jy ! Component: 2000 - total flux cleaned = -0.0152162 Jy ! Total flux subtracted in 2048 components = -0.0153389 Jy ! Clean residual min=-0.001862 max=0.001687 Jy/beam ! Clean residual mean=-0.000007 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 3.44849 Jy keep ! Adding 145 model components to the UV plane model. ! The established model now contains 259 components and 3.44849 Jy ![Exited script file: muppet] wmap "J0555+3948_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 8.835 at -33 degrees (North through East) ! Clean map min=-0.0089128 max=3.2402 Jy/beam ! Writing clean map to FITS file: J0555+3948_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.24021 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625819 device "J0555+3948_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0579426 0.0579426 0.115885 0.23177 0.46354 0.927081 1.85416 3.70832 7.41665 14.8333 29.6666 59.3332 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 3.24 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.354 x 8.835 at -33 degrees (North through East) ! Clean map min=-0.0089128 max=3.2402 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0555+3948_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0555+3948_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0555+3948_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:30:10 2006