! Started logfile: J0449+1121_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:24:04 2006 obs J0449+1121_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0449+1121_S_2006_02_23_yyk_uva.fits ! AN table 1: 348 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.92069 visibilities/baseline/integration-bin. ! Found source: J0449+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 57672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0449+1121_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.26689 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.679 mas, bpa=7.469 degrees ! Estimated noise=1.41644 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.993198 Jy ! Component: 100 - total flux cleaned = 1.2459 Jy ! Total flux subtracted in 100 components = 1.2459 Jy ! Clean residual min=-0.047171 max=0.073920 Jy/beam ! Clean residual mean=-0.000094 rms=0.016761 Jy/beam ! Combined flux in latest and established models = 1.2459 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.2459 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.269552Jy sigma=5.010232 ! Fit after self-cal, rms=0.269225Jy sigma=5.005075 ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=6.679 mas, bpa=7.469 degrees ! Estimated noise=1.41644 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=7.462 mas, bpa=4.706 degrees ! Estimated noise=1.04964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.115399 Jy ! Component: 100 - total flux cleaned = 0.173602 Jy ! Component: 150 - total flux cleaned = 0.206956 Jy ! Component: 200 - total flux cleaned = 0.218482 Jy ! Total flux subtracted in 200 components = 0.218482 Jy ! Clean residual min=-0.038773 max=0.045722 Jy/beam ! Clean residual mean=-0.000302 rms=0.012683 Jy/beam ! Combined flux in latest and established models = 1.46438 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 37 components and 1.46438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216478Jy sigma=4.244412 ! Fit after self-cal, rms=0.216364Jy sigma=4.243463 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 7.462 at 4.706 degrees (North through East) ! Clean map min=-0.037619 max=1.1446 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01345 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.91 HN 0.98 KP 0.94 ! LA 1.20 MK 0.98 NL 0.92 OV 0.97 ! PT 1.04 SC 0.93 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01093 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 1.00 KP 0.96 ! LA 1.16 MK 1.03 NL 0.94 OV 0.99 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.947329 ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.97 HN 0.99 KP 0.96 ! LA 0.93 MK 1.15 NL 1.03 OV 1.01 ! PT 1.06 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0646 ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.96 HN 0.93 KP 0.87 ! LA 0.79 MK 1.13 NL 0.95 OV 0.84 ! PT 0.92 SC 1.06 ! ! ! Fit before self-cal, rms=0.216364Jy sigma=4.243463 ! Fit after self-cal, rms=0.139652Jy sigma=2.527090 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139652Jy sigma=2.527090 ! Fit after self-cal, rms=0.139659Jy sigma=2.527067 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.594 mas, bmaj=7.723 mas, bpa=5.659 degrees ! Estimated noise=1.05662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487666 Jy ! Component: 100 - total flux cleaned = 0.00216071 Jy ! Component: 150 - total flux cleaned = -0.000172692 Jy ! Component: 200 - total flux cleaned = -0.00261454 Jy ! Total flux subtracted in 200 components = -0.00261454 Jy ! Clean residual min=-0.014658 max=0.013336 Jy/beam ! Clean residual mean=-0.000064 rms=0.003648 Jy/beam ! Combined flux in latest and established models = 1.46176 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 1.46176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134265Jy sigma=2.446371 ! Fit after self-cal, rms=0.134236Jy sigma=2.446133 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134236Jy sigma=2.446133 ! Fit after self-cal, rms=0.127461Jy sigma=2.335154 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012205 Jy ! Component: 100 - total flux cleaned = -0.00268548 Jy ! Component: 150 - total flux cleaned = -0.00394202 Jy ! Component: 200 - total flux cleaned = -0.00502385 Jy ! Total flux subtracted in 200 components = -0.00502385 Jy ! Clean residual min=-0.012049 max=0.013151 Jy/beam ! Clean residual mean=-0.000041 rms=0.003460 Jy/beam ! Combined flux in latest and established models = 1.45674 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 1.45674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125635Jy sigma=2.311543 ! Fit after self-cal, rms=0.125267Jy sigma=2.306668 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.594 x 7.723 at 5.659 degrees (North through East) ! Clean map min=-0.01142 max=1.1721 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125267Jy sigma=2.306668 ! Fit after self-cal, rms=0.070084Jy sigma=1.174359 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070084Jy sigma=1.174359 ! Fit after self-cal, rms=0.070053Jy sigma=1.173701 ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=7.75 mas, bpa=5.529 degrees ! Estimated noise=1.05259 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00423192 Jy ! Component: 100 - total flux cleaned = -0.00571739 Jy ! Component: 150 - total flux cleaned = -0.00697729 Jy ! Component: 200 - total flux cleaned = -0.00805298 Jy ! Total flux subtracted in 200 components = -0.00805297 Jy ! Clean residual min=-0.008688 max=0.008420 Jy/beam ! Clean residual mean=-0.000037 rms=0.002478 Jy/beam ! Combined flux in latest and established models = 1.44869 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 1.44869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067231Jy sigma=1.121624 ! Fit after self-cal, rms=0.067212Jy sigma=1.121303 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067212Jy sigma=1.121303 ! Fit after self-cal, rms=0.063870Jy sigma=1.034446 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063870Jy sigma=1.034446 ! Fit after self-cal, rms=0.063873Jy sigma=1.034435 ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=7.768 mas, bpa=5.365 degrees ! Estimated noise=1.05292 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00261408 Jy ! Component: 100 - total flux cleaned = -0.00370234 Jy ! Component: 150 - total flux cleaned = -0.00462461 Jy ! Component: 200 - total flux cleaned = -0.00541382 Jy ! Total flux subtracted in 200 components = -0.00541382 Jy ! Clean residual min=-0.007172 max=0.007132 Jy/beam ! Clean residual mean=-0.000031 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 1.44327 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 52 components and 1.44327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062202Jy sigma=1.002925 ! Fit after self-cal, rms=0.062184Jy sigma=1.002732 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=10.78 mas, bpa=-5.301 degrees ! Estimated noise=1.30338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00233547 Jy ! Component: 100 - total flux cleaned = -0.00258163 Jy ! Component: 150 - total flux cleaned = -0.00275512 Jy ! Component: 200 - total flux cleaned = -0.00286173 Jy ! Total flux subtracted in 200 components = -0.00286173 Jy ! Clean residual min=-0.007897 max=0.007463 Jy/beam ! Clean residual mean=-0.000042 rms=0.002772 Jy/beam ! Combined flux in latest and established models = 1.44041 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 1.44041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062154Jy sigma=1.001209 ! Fit after self-cal, rms=0.062060Jy sigma=0.999927 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.778 mas, bmaj=6.839 mas, bpa=8.334 degrees ! Estimated noise=1.40184 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.982655 Jy ! Component: 100 - total flux cleaned = 1.23209 Jy ! Component: 150 - total flux cleaned = 1.32674 Jy ! Component: 200 - total flux cleaned = 1.36822 Jy ! Total flux subtracted in 200 components = 1.36822 Jy ! Clean residual min=-0.010878 max=0.018241 Jy/beam ! Clean residual mean=0.000036 rms=0.003774 Jy/beam ! Combined flux in latest and established models = 1.36822 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 1.36822 Jy ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=7.768 mas, bpa=5.365 degrees ! Estimated noise=1.05292 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315693 Jy ! Component: 100 - total flux cleaned = 0.0479235 Jy ! Component: 150 - total flux cleaned = 0.0570736 Jy ! Component: 200 - total flux cleaned = 0.0609235 Jy ! Total flux subtracted in 200 components = 0.0609235 Jy ! Clean residual min=-0.007482 max=0.008843 Jy/beam ! Clean residual mean=0.000007 rms=0.002253 Jy/beam ! Combined flux in latest and established models = 1.42915 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 64 components and 1.42915 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.776 mas, bmaj=10.78 mas, bpa=-5.301 degrees ! Estimated noise=1.30338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00560501 Jy ! Component: 100 - total flux cleaned = 0.00627434 Jy ! Component: 150 - total flux cleaned = 0.00681244 Jy ! Component: 200 - total flux cleaned = 0.0072711 Jy ! Total flux subtracted in 200 components = 0.0072711 Jy ! Clean residual min=-0.006849 max=0.008761 Jy/beam ! Clean residual mean=-0.000018 rms=0.002836 Jy/beam ! Combined flux in latest and established models = 1.43642 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 71 components and 1.43642 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=7.768 mas, bpa=5.365 degrees ! Estimated noise=1.05292 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106209 Jy ! Component: 100 - total flux cleaned = -0.00056832 Jy ! Component: 150 - total flux cleaned = -0.000215359 Jy ! Component: 200 - total flux cleaned = -0.000225213 Jy ! Total flux subtracted in 200 components = -0.000225213 Jy ! Clean residual min=-0.006186 max=0.007643 Jy/beam ! Clean residual mean=-0.000010 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 1.43619 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 1.43619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061679Jy sigma=0.998098 ! Fit after self-cal, rms=0.061649Jy sigma=0.997814 wmodel J0449+1121_S_2006_02_23_yyk\_map.mod ! Writing 80 model components to file: J0449+1121_S_2006_02_23_yyk_map.mod wobs J0449+1121_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0449+1121_S_2006_02_23_yyk_uvs.fits wwins J0449+1121_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J0449+1121_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342548 Jy ! Component: 100 - total flux cleaned = 0.0057968 Jy ! Component: 150 - total flux cleaned = 0.00743887 Jy ! Component: 200 - total flux cleaned = 0.00897127 Jy ! Component: 250 - total flux cleaned = 0.00983629 Jy ! Component: 300 - total flux cleaned = 0.010748 Jy ! Component: 350 - total flux cleaned = 0.0112675 Jy ! Component: 400 - total flux cleaned = 0.0119284 Jy ! Component: 450 - total flux cleaned = 0.0123227 Jy ! Component: 500 - total flux cleaned = 0.0125505 Jy ! Component: 550 - total flux cleaned = 0.0127686 Jy ! Component: 600 - total flux cleaned = 0.0130448 Jy ! Component: 650 - total flux cleaned = 0.0133099 Jy ! Component: 700 - total flux cleaned = 0.0135638 Jy ! Component: 750 - total flux cleaned = 0.0138094 Jy ! Component: 800 - total flux cleaned = 0.0141638 Jy ! Component: 850 - total flux cleaned = 0.014507 Jy ! Component: 900 - total flux cleaned = 0.014952 Jy ! Component: 950 - total flux cleaned = 0.0153829 Jy ! Component: 1000 - total flux cleaned = 0.0156458 Jy ! Component: 1050 - total flux cleaned = 0.0160549 Jy ! Component: 1100 - total flux cleaned = 0.0164533 Jy ! Component: 1150 - total flux cleaned = 0.016841 Jy ! Component: 1200 - total flux cleaned = 0.0170788 Jy ! Component: 1250 - total flux cleaned = 0.0172192 Jy ! Component: 1300 - total flux cleaned = 0.0174012 Jy ! Component: 1350 - total flux cleaned = 0.0174893 Jy ! Component: 1400 - total flux cleaned = 0.0175328 Jy ! Component: 1450 - total flux cleaned = 0.0177468 Jy ! Component: 1500 - total flux cleaned = 0.0178308 Jy ! Component: 1550 - total flux cleaned = 0.0180779 Jy ! Component: 1600 - total flux cleaned = 0.0182393 Jy ! Component: 1650 - total flux cleaned = 0.018358 Jy ! Component: 1700 - total flux cleaned = 0.0185144 Jy ! Component: 1750 - total flux cleaned = 0.0185917 Jy ! Component: 1800 - total flux cleaned = 0.0188195 Jy ! Component: 1850 - total flux cleaned = 0.0190052 Jy ! Component: 1900 - total flux cleaned = 0.0191884 Jy ! Component: 1950 - total flux cleaned = 0.019333 Jy ! Component: 2000 - total flux cleaned = 0.019476 Jy ! Total flux subtracted in 2048 components = 0.0196168 Jy ! Clean residual min=-0.002210 max=0.001880 Jy/beam ! Clean residual mean=-0.000006 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 1.45581 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 221 components and 1.45581 Jy ![Exited script file: muppet] wmap "J0449+1121_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.563 x 7.768 at 5.365 degrees (North through East) ! Clean map min=-0.0033114 max=1.1808 Jy/beam ! Writing clean map to FITS file: J0449+1121_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.18079 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000662845 device "J0449+1121_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0449+1121_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.168407 0.168407 0.336815 0.673629 1.34726 2.69452 5.38904 10.7781 21.5561 43.1123 86.2246 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.18 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.563 x 7.768 at 5.365 degrees (North through East) ! Clean map min=-0.0033114 max=1.1808 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0449+1121_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0449+1121_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0449+1121_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:24:27 2006