! Started logfile: J0449+1121_S_2006_02_16_yyk_uvs.log on Wed Jul 5 11:23:38 2006 obs J0449+1121_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0449+1121_S_2006_02_16_yyk_uva.fits ! AN table 1: 348 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.929949 visibilities/baseline/integration-bin. ! Found source: J0449+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 58252 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0449+1121_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.21162 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.828 mas, bmaj=6.715 mas, bpa=5.279 degrees ! Estimated noise=1.49895 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.954427 Jy ! Component: 100 - total flux cleaned = 1.19453 Jy ! Total flux subtracted in 100 components = 1.19453 Jy ! Clean residual min=-0.059298 max=0.094975 Jy/beam ! Clean residual mean=0.000058 rms=0.018996 Jy/beam ! Combined flux in latest and established models = 1.19453 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.19453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288928Jy sigma=5.200217 ! Fit after self-cal, rms=0.289046Jy sigma=5.197684 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=7.565 mas, bpa=4.024 degrees ! Estimated noise=1.03991 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0960368 Jy ! Component: 100 - total flux cleaned = 0.143981 Jy ! Component: 150 - total flux cleaned = 0.172925 Jy ! Component: 200 - total flux cleaned = 0.191093 Jy ! Total flux subtracted in 200 components = 0.191093 Jy ! Clean residual min=-0.053723 max=0.080181 Jy/beam ! Clean residual mean=-0.000087 rms=0.018046 Jy/beam ! Combined flux in latest and established models = 1.38563 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 45 components and 1.38563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253793Jy sigma=4.713999 ! Fit after self-cal, rms=0.253624Jy sigma=4.713564 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.482 x 7.565 at 4.024 degrees (North through East) ! Clean map min=-0.051521 max=1.1098 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01838 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.89 HN 0.95 KP 0.91 ! LA 1.16 MK 0.90 NL 1.18 OV 0.94 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00138 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.93 HN 0.97 KP 0.93 ! LA 1.14 MK 0.98 NL 1.26 OV 0.95 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.946544 ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.93 HN 0.96 KP 0.93 ! LA 0.90 MK 1.10 NL 1.35 OV 0.98 ! PT 1.03 SC 0.98 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.05726 ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.93 HN 0.90 KP 0.85 ! LA 0.76 MK 1.05 NL 1.29 OV 0.83 ! PT 0.90 SC 1.06 ! ! ! Fit before self-cal, rms=0.253624Jy sigma=4.713564 ! Fit after self-cal, rms=0.142707Jy sigma=2.398272 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142707Jy sigma=2.398272 ! Fit after self-cal, rms=0.142761Jy sigma=2.398181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=7.788 mas, bpa=4.583 degrees ! Estimated noise=1.03139 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00634469 Jy ! Component: 100 - total flux cleaned = -0.00725821 Jy ! Component: 150 - total flux cleaned = -0.0079484 Jy ! Component: 200 - total flux cleaned = -0.00872213 Jy ! Total flux subtracted in 200 components = -0.00872213 Jy ! Clean residual min=-0.011543 max=0.009176 Jy/beam ! Clean residual mean=-0.000033 rms=0.002484 Jy/beam ! Combined flux in latest and established models = 1.3769 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 1.3769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140119Jy sigma=2.360596 ! Fit after self-cal, rms=0.140025Jy sigma=2.360350 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140025Jy sigma=2.360350 ! Fit after self-cal, rms=0.121720Jy sigma=2.145381 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00068131 Jy ! Component: 100 - total flux cleaned = -0.00125346 Jy ! Component: 150 - total flux cleaned = -0.00160102 Jy ! Component: 200 - total flux cleaned = -0.00206265 Jy ! Total flux subtracted in 200 components = -0.00206265 Jy ! Clean residual min=-0.010588 max=0.009608 Jy/beam ! Clean residual mean=-0.000022 rms=0.002401 Jy/beam ! Combined flux in latest and established models = 1.37484 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 1.37484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120962Jy sigma=2.137759 ! Fit after self-cal, rms=0.119892Jy sigma=2.128481 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.5 x 7.788 at 4.583 degrees (North through East) ! Clean map min=-0.0098702 max=1.1183 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119892Jy sigma=2.128481 ! Fit after self-cal, rms=0.077759Jy sigma=1.127946 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077759Jy sigma=1.127946 ! Fit after self-cal, rms=0.077549Jy sigma=1.126561 ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=7.814 mas, bpa=4.826 degrees ! Estimated noise=1.02848 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309245 Jy ! Component: 100 - total flux cleaned = -0.00444833 Jy ! Component: 150 - total flux cleaned = -0.00555494 Jy ! Component: 200 - total flux cleaned = -0.00633827 Jy ! Total flux subtracted in 200 components = -0.00633827 Jy ! Clean residual min=-0.006375 max=0.006006 Jy/beam ! Clean residual mean=-0.000011 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 1.3685 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 1.3685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076501Jy sigma=1.106416 ! Fit after self-cal, rms=0.076434Jy sigma=1.106064 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076434Jy sigma=1.106064 ! Fit after self-cal, rms=0.073790Jy sigma=1.035780 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073790Jy sigma=1.035780 ! Fit after self-cal, rms=0.073772Jy sigma=1.035737 ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.829 mas, bpa=4.878 degrees ! Estimated noise=1.02935 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159123 Jy ! Component: 100 - total flux cleaned = -0.00265032 Jy ! Component: 150 - total flux cleaned = -0.00352854 Jy ! Component: 200 - total flux cleaned = -0.0040284 Jy ! Total flux subtracted in 200 components = -0.0040284 Jy ! Clean residual min=-0.005742 max=0.005471 Jy/beam ! Clean residual mean=-0.000008 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 1.36447 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 63 components and 1.36447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073179Jy sigma=1.022859 ! Fit after self-cal, rms=0.073157Jy sigma=1.022732 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.269 mas, bmaj=10.89 mas, bpa=-1.128 degrees ! Estimated noise=1.28992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151969 Jy ! Component: 100 - total flux cleaned = -0.00161353 Jy ! Component: 150 - total flux cleaned = -0.00167531 Jy ! Component: 200 - total flux cleaned = -0.00172095 Jy ! Total flux subtracted in 200 components = -0.00172095 Jy ! Clean residual min=-0.005840 max=0.005506 Jy/beam ! Clean residual mean=-0.000007 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 1.36275 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 1.36275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073160Jy sigma=1.023223 ! Fit after self-cal, rms=0.073105Jy sigma=1.022383 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=6.84 mas, bpa=5.179 degrees ! Estimated noise=1.48615 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.946711 Jy ! Component: 100 - total flux cleaned = 1.18219 Jy ! Component: 150 - total flux cleaned = 1.27137 Jy ! Component: 200 - total flux cleaned = 1.3074 Jy ! Total flux subtracted in 200 components = 1.3074 Jy ! Clean residual min=-0.012224 max=0.013131 Jy/beam ! Clean residual mean=0.000062 rms=0.003085 Jy/beam ! Combined flux in latest and established models = 1.3074 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.3074 Jy ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.829 mas, bpa=4.878 degrees ! Estimated noise=1.02935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251199 Jy ! Component: 100 - total flux cleaned = 0.0378449 Jy ! Component: 150 - total flux cleaned = 0.0448744 Jy ! Component: 200 - total flux cleaned = 0.0474306 Jy ! Total flux subtracted in 200 components = 0.0474306 Jy ! Clean residual min=-0.006791 max=0.006742 Jy/beam ! Clean residual mean=0.000020 rms=0.001685 Jy/beam ! Combined flux in latest and established models = 1.35483 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 54 components and 1.35483 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.269 mas, bmaj=10.89 mas, bpa=-1.128 degrees ! Estimated noise=1.28992 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490536 Jy ! Component: 100 - total flux cleaned = 0.00564596 Jy ! Component: 150 - total flux cleaned = 0.0059848 Jy ! Component: 200 - total flux cleaned = 0.00620651 Jy ! Total flux subtracted in 200 components = 0.00620651 Jy ! Clean residual min=-0.005897 max=0.005692 Jy/beam ! Clean residual mean=0.000006 rms=0.001857 Jy/beam ! Combined flux in latest and established models = 1.36104 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 1.36104 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.486 mas, bmaj=7.829 mas, bpa=4.878 degrees ! Estimated noise=1.02935 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00126879 Jy ! Component: 100 - total flux cleaned = -0.000892814 Jy ! Component: 150 - total flux cleaned = -0.000575134 Jy ! Component: 200 - total flux cleaned = -0.000378942 Jy ! Total flux subtracted in 200 components = -0.000378942 Jy ! Clean residual min=-0.006437 max=0.005566 Jy/beam ! Clean residual mean=0.000003 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 1.36066 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 71 components and 1.36066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072875Jy sigma=1.019765 ! Fit after self-cal, rms=0.072853Jy sigma=1.019529 wmodel J0449+1121_S_2006_02_16_yyk\_map.mod ! Writing 71 model components to file: J0449+1121_S_2006_02_16_yyk_map.mod wobs J0449+1121_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0449+1121_S_2006_02_16_yyk_uvs.fits wwins J0449+1121_S_2006_02_16_yyk\_map.win ! wwins: Wrote 1 windows to J0449+1121_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00193319 Jy ! Component: 100 - total flux cleaned = -0.00269351 Jy ! Component: 150 - total flux cleaned = -0.0032195 Jy ! Component: 200 - total flux cleaned = -0.0041007 Jy ! Component: 250 - total flux cleaned = -0.00470291 Jy ! Component: 300 - total flux cleaned = -0.00548841 Jy ! Component: 350 - total flux cleaned = -0.00609854 Jy ! Component: 400 - total flux cleaned = -0.00655136 Jy ! Component: 450 - total flux cleaned = -0.00679769 Jy ! Component: 500 - total flux cleaned = -0.00703477 Jy ! Component: 550 - total flux cleaned = -0.00720891 Jy ! Component: 600 - total flux cleaned = -0.00737828 Jy ! Component: 650 - total flux cleaned = -0.00754102 Jy ! Component: 700 - total flux cleaned = -0.00754179 Jy ! Component: 750 - total flux cleaned = -0.00754359 Jy ! Component: 800 - total flux cleaned = -0.00749415 Jy ! Component: 850 - total flux cleaned = -0.00744597 Jy ! Component: 900 - total flux cleaned = -0.00739861 Jy ! Component: 950 - total flux cleaned = -0.00721606 Jy ! Component: 1000 - total flux cleaned = -0.007216 Jy ! Component: 1050 - total flux cleaned = -0.00704065 Jy ! Component: 1100 - total flux cleaned = -0.00695588 Jy ! Component: 1150 - total flux cleaned = -0.00691406 Jy ! Component: 1200 - total flux cleaned = -0.00687248 Jy ! Component: 1250 - total flux cleaned = -0.00662978 Jy ! Component: 1300 - total flux cleaned = -0.00655017 Jy ! Component: 1350 - total flux cleaned = -0.00635482 Jy ! Component: 1400 - total flux cleaned = -0.00624034 Jy ! Component: 1450 - total flux cleaned = -0.00620262 Jy ! Component: 1500 - total flux cleaned = -0.00616524 Jy ! Component: 1550 - total flux cleaned = -0.00616568 Jy ! Component: 1600 - total flux cleaned = -0.00623686 Jy ! Component: 1650 - total flux cleaned = -0.00620122 Jy ! Component: 1700 - total flux cleaned = -0.00613155 Jy ! Component: 1750 - total flux cleaned = -0.00609692 Jy ! Component: 1800 - total flux cleaned = -0.00596184 Jy ! Component: 1850 - total flux cleaned = -0.00589554 Jy ! Component: 1900 - total flux cleaned = -0.00586224 Jy ! Component: 1950 - total flux cleaned = -0.00579753 Jy ! Component: 2000 - total flux cleaned = -0.00567055 Jy ! Total flux subtracted in 2048 components = -0.00563944 Jy ! Clean residual min=-0.001875 max=0.002029 Jy/beam ! Clean residual mean=0.000003 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 1.35502 Jy keep ! Adding 142 model components to the UV plane model. ! The established model now contains 213 components and 1.35502 Jy ![Exited script file: muppet] wmap "J0449+1121_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 7.829 at 4.878 degrees (North through East) ! Clean map min=-0.0036764 max=1.1254 Jy/beam ! Writing clean map to FITS file: J0449+1121_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.12545 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000607385 device "J0449+1121_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0449+1121_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.161905 0.161905 0.32381 0.647621 1.29524 2.59048 5.18097 10.3619 20.7239 41.4477 82.8955 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.486 x 7.829 at 4.878 degrees (North through East) ! Clean map min=-0.0036764 max=1.1254 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0449+1121_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0449+1121_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0449+1121_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:24:03 2006