! Started logfile: J0449+1121_S_2006_02_14_yyk_uvs.log on Wed Jul 5 11:23:12 2006 obs J0449+1121_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0449+1121_S_2006_02_14_yyk_uva.fits ! AN table 1: 347 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866475 visibilities/baseline/integration-bin. ! Found source: J0449+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2683 lines of history. ! ! Reading 54120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0449+1121_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.26878 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=6.662 mas, bpa=6.983 degrees ! Estimated noise=1.50392 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.003 Jy ! Component: 100 - total flux cleaned = 1.25127 Jy ! Total flux subtracted in 100 components = 1.25127 Jy ! Clean residual min=-0.055415 max=0.074490 Jy/beam ! Clean residual mean=-0.000081 rms=0.017697 Jy/beam ! Combined flux in latest and established models = 1.25127 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.25127 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.271352Jy sigma=4.954768 ! Fit after self-cal, rms=0.271195Jy sigma=4.951503 ! Inverting map and beam ! Estimated beam: bmin=2.796 mas, bmaj=6.662 mas, bpa=6.983 degrees ! Estimated noise=1.50392 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=7.463 mas, bpa=5.236 degrees ! Estimated noise=1.09293 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.110278 Jy ! Component: 100 - total flux cleaned = 0.166111 Jy ! Component: 150 - total flux cleaned = 0.19823 Jy ! Component: 200 - total flux cleaned = 0.210161 Jy ! Total flux subtracted in 200 components = 0.210161 Jy ! Clean residual min=-0.041455 max=0.050927 Jy/beam ! Clean residual mean=-0.000313 rms=0.013015 Jy/beam ! Combined flux in latest and established models = 1.46143 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 36 components and 1.46143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224585Jy sigma=4.270193 ! Fit after self-cal, rms=0.224357Jy sigma=4.269150 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.531 x 7.463 at 5.236 degrees (North through East) ! Clean map min=-0.040256 max=1.1474 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01965 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.90 HN 0.97 KP 0.93 ! LA 1.21 MK 0.95 NL 0.92 OV 0.97 ! PT 1.05 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00912 ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 HN 0.99 KP 0.95 ! LA 1.17 MK 1.04 NL 0.94 OV 1.01 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.953046 ! Telescope amplitude corrections in sub-array 1: ! BR 1.46 FD 0.95 HN 0.99 KP 0.95 ! LA 0.93 MK 1.13 NL 1.03 OV 1.01 ! PT 1.06 SC 0.97 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0637 ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 0.93 KP 0.88 ! LA 0.78 MK 1.12 NL 0.94 OV 0.86 ! PT 0.93 SC 1.07 ! ! ! Fit before self-cal, rms=0.224357Jy sigma=4.269150 ! Fit after self-cal, rms=0.147350Jy sigma=2.501655 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147350Jy sigma=2.501655 ! Fit after self-cal, rms=0.147351Jy sigma=2.501603 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=7.725 mas, bpa=5.83 degrees ! Estimated noise=1.10388 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0123341 Jy ! Component: 100 - total flux cleaned = 0.00959802 Jy ! Component: 150 - total flux cleaned = 0.00725349 Jy ! Component: 200 - total flux cleaned = 0.00481458 Jy ! Total flux subtracted in 200 components = 0.00481458 Jy ! Clean residual min=-0.014369 max=0.013834 Jy/beam ! Clean residual mean=-0.000064 rms=0.003771 Jy/beam ! Combined flux in latest and established models = 1.46624 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 1.46624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140929Jy sigma=2.408362 ! Fit after self-cal, rms=0.140794Jy sigma=2.407981 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140794Jy sigma=2.407981 ! Fit after self-cal, rms=0.131243Jy sigma=2.247803 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00124524 Jy ! Component: 100 - total flux cleaned = -0.00268391 Jy ! Component: 150 - total flux cleaned = -0.00393753 Jy ! Component: 200 - total flux cleaned = -0.00503062 Jy ! Total flux subtracted in 200 components = -0.00503062 Jy ! Clean residual min=-0.012196 max=0.014604 Jy/beam ! Clean residual mean=-0.000039 rms=0.003574 Jy/beam ! Combined flux in latest and established models = 1.46121 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 1.46121 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129163Jy sigma=2.223346 ! Fit after self-cal, rms=0.128521Jy sigma=2.214779 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.572 x 7.725 at 5.83 degrees (North through East) ! Clean map min=-0.011522 max=1.1784 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128521Jy sigma=2.214779 ! Fit after self-cal, rms=0.081293Jy sigma=1.208575 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081293Jy sigma=1.208575 ! Fit after self-cal, rms=0.081186Jy sigma=1.207004 ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=7.754 mas, bpa=5.764 degrees ! Estimated noise=1.0992 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0037407 Jy ! Component: 100 - total flux cleaned = -0.00527624 Jy ! Component: 150 - total flux cleaned = -0.00687676 Jy ! Component: 200 - total flux cleaned = -0.00795668 Jy ! Total flux subtracted in 200 components = -0.00795668 Jy ! Clean residual min=-0.008395 max=0.009025 Jy/beam ! Clean residual mean=-0.000041 rms=0.002562 Jy/beam ! Combined flux in latest and established models = 1.45326 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 1.45326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078559Jy sigma=1.154146 ! Fit after self-cal, rms=0.078529Jy sigma=1.153424 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078529Jy sigma=1.153424 ! Fit after self-cal, rms=0.074445Jy sigma=1.030653 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074445Jy sigma=1.030653 ! Fit after self-cal, rms=0.074450Jy sigma=1.030609 ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=7.765 mas, bpa=5.651 degrees ! Estimated noise=1.09911 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00287595 Jy ! Component: 100 - total flux cleaned = -0.0039575 Jy ! Component: 150 - total flux cleaned = -0.00465736 Jy ! Component: 200 - total flux cleaned = -0.00565975 Jy ! Total flux subtracted in 200 components = -0.00565975 Jy ! Clean residual min=-0.006988 max=0.007723 Jy/beam ! Clean residual mean=-0.000031 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 1.4476 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 1.4476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073031Jy sigma=0.996249 ! Fit after self-cal, rms=0.073017Jy sigma=0.995901 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.15 mas, bmaj=10.71 mas, bpa=-2.603 degrees ! Estimated noise=1.37151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225623 Jy ! Component: 100 - total flux cleaned = -0.00250677 Jy ! Component: 150 - total flux cleaned = -0.00264399 Jy ! Component: 200 - total flux cleaned = -0.00279573 Jy ! Total flux subtracted in 200 components = -0.00279573 Jy ! Clean residual min=-0.009592 max=0.008401 Jy/beam ! Clean residual mean=-0.000040 rms=0.002617 Jy/beam ! Combined flux in latest and established models = 1.4448 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 57 components and 1.4448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072913Jy sigma=0.993763 ! Fit after self-cal, rms=0.072849Jy sigma=0.992366 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.803 mas, bmaj=6.826 mas, bpa=7.852 degrees ! Estimated noise=1.48686 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.991497 Jy ! Component: 100 - total flux cleaned = 1.23677 Jy ! Component: 150 - total flux cleaned = 1.32905 Jy ! Component: 200 - total flux cleaned = 1.37019 Jy ! Total flux subtracted in 200 components = 1.37019 Jy ! Clean residual min=-0.012816 max=0.018576 Jy/beam ! Clean residual mean=0.000045 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 1.37019 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 1.37019 Jy ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=7.765 mas, bpa=5.651 degrees ! Estimated noise=1.09911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326852 Jy ! Component: 100 - total flux cleaned = 0.0498033 Jy ! Component: 150 - total flux cleaned = 0.05944 Jy ! Component: 200 - total flux cleaned = 0.0639274 Jy ! Total flux subtracted in 200 components = 0.0639274 Jy ! Clean residual min=-0.006851 max=0.009602 Jy/beam ! Clean residual mean=0.000012 rms=0.002270 Jy/beam ! Combined flux in latest and established models = 1.43412 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 61 components and 1.43412 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.15 mas, bmaj=10.71 mas, bpa=-2.603 degrees ! Estimated noise=1.37151 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00610261 Jy ! Component: 100 - total flux cleaned = 0.00678053 Jy ! Component: 150 - total flux cleaned = 0.00720421 Jy ! Component: 200 - total flux cleaned = 0.00756522 Jy ! Total flux subtracted in 200 components = 0.00756522 Jy ! Clean residual min=-0.008569 max=0.009468 Jy/beam ! Clean residual mean=-0.000017 rms=0.002686 Jy/beam ! Combined flux in latest and established models = 1.44168 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 1.44168 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=7.765 mas, bpa=5.651 degrees ! Estimated noise=1.09911 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112997 Jy ! Component: 100 - total flux cleaned = -0.000970255 Jy ! Component: 150 - total flux cleaned = -0.00108876 Jy ! Component: 200 - total flux cleaned = -0.000976632 Jy ! Total flux subtracted in 200 components = -0.000976632 Jy ! Clean residual min=-0.006255 max=0.008688 Jy/beam ! Clean residual mean=-0.000007 rms=0.002087 Jy/beam ! Combined flux in latest and established models = 1.4407 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 77 components and 1.4407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072867Jy sigma=0.992520 ! Fit after self-cal, rms=0.072859Jy sigma=0.992160 wmodel J0449+1121_S_2006_02_14_yyk\_map.mod ! Writing 77 model components to file: J0449+1121_S_2006_02_14_yyk_map.mod wobs J0449+1121_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0449+1121_S_2006_02_14_yyk_uvs.fits wwins J0449+1121_S_2006_02_14_yyk\_map.win ! wwins: Wrote 1 windows to J0449+1121_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371853 Jy ! Component: 100 - total flux cleaned = 0.00689473 Jy ! Component: 150 - total flux cleaned = 0.00931073 Jy ! Component: 200 - total flux cleaned = 0.0108881 Jy ! Component: 250 - total flux cleaned = 0.0123592 Jy ! Component: 300 - total flux cleaned = 0.0137377 Jy ! Component: 350 - total flux cleaned = 0.0150532 Jy ! Component: 400 - total flux cleaned = 0.015975 Jy ! Component: 450 - total flux cleaned = 0.0170168 Jy ! Component: 500 - total flux cleaned = 0.0179413 Jy ! Component: 550 - total flux cleaned = 0.0189839 Jy ! Component: 600 - total flux cleaned = 0.0197738 Jy ! Component: 650 - total flux cleaned = 0.0206056 Jy ! Component: 700 - total flux cleaned = 0.0211405 Jy ! Component: 750 - total flux cleaned = 0.0217923 Jy ! Component: 800 - total flux cleaned = 0.0224237 Jy ! Component: 850 - total flux cleaned = 0.0229148 Jy ! Component: 900 - total flux cleaned = 0.0233923 Jy ! Component: 950 - total flux cleaned = 0.0239715 Jy ! Component: 1000 - total flux cleaned = 0.024366 Jy ! Component: 1050 - total flux cleaned = 0.0248624 Jy ! Component: 1100 - total flux cleaned = 0.0254005 Jy ! Component: 1150 - total flux cleaned = 0.0258209 Jy ! Component: 1200 - total flux cleaned = 0.0261802 Jy ! Component: 1250 - total flux cleaned = 0.0266322 Jy ! Component: 1300 - total flux cleaned = 0.0270749 Jy ! Component: 1350 - total flux cleaned = 0.0274109 Jy ! Component: 1400 - total flux cleaned = 0.027882 Jy ! Component: 1450 - total flux cleaned = 0.0282972 Jy ! Component: 1500 - total flux cleaned = 0.0285687 Jy ! Component: 1550 - total flux cleaned = 0.028836 Jy ! Component: 1600 - total flux cleaned = 0.0291847 Jy ! Component: 1650 - total flux cleaned = 0.0293556 Jy ! Component: 1700 - total flux cleaned = 0.0295662 Jy ! Component: 1750 - total flux cleaned = 0.0297314 Jy ! Component: 1800 - total flux cleaned = 0.0298936 Jy ! Component: 1850 - total flux cleaned = 0.0300134 Jy ! Component: 1900 - total flux cleaned = 0.0301312 Jy ! Component: 1950 - total flux cleaned = 0.0302089 Jy ! Component: 2000 - total flux cleaned = 0.0304378 Jy ! Total flux subtracted in 2048 components = 0.0304379 Jy ! Clean residual min=-0.002186 max=0.001986 Jy/beam ! Clean residual mean=0.000004 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 1.47114 Jy keep ! Adding 116 model components to the UV plane model. ! The established model now contains 193 components and 1.47114 Jy ![Exited script file: muppet] wmap "J0449+1121_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 7.765 at 5.651 degrees (North through East) ! Clean map min=-0.0029257 max=1.1833 Jy/beam ! Writing clean map to FITS file: J0449+1121_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.18332 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000684516 device "J0449+1121_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0449+1121_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.173541 0.173541 0.347082 0.694164 1.38833 2.77666 5.55331 11.1066 22.2132 44.4265 88.853 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.183 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.532 x 7.765 at 5.651 degrees (North through East) ! Clean map min=-0.0029257 max=1.1833 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0449+1121_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0449+1121_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0449+1121_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:23:38 2006